Hello world!
Nach einem mutigen Mega-Update Dr. Seltsam / MT /Tarandor Patch - Cody musste ich leider ein paar Funktionseinbußen hinnehmen.Meine Budget-Card wurde nicht mehr gefunden und ich konnte meine extern USB-HD nicht mehr finden (hat vorher funktioniert). Durch zurückstellen auf Kernel 2.6.9 konnte ich das Budget-Card Problem lösen, aber meine USB-HD wird nicht mehr gefunden (was vor dem Update-Dreisprung der Fall war). Ich habe das Forum nach Tips durchforstet, aber eigentlich sieht alles o.k. aus. Hat jemand einen Tip?
Beim Einschalten der HD/Einstecken eines USB-Sticks erscheint nur folgende Meldung im Logread
Code
Dec 3 21:12:03 linvdr user.info kernel: usb 1-2: new high speed USB device using address 2
Dec 3 21:12:08 linvdr user.warn kernel: usb 1-2: control timeout on ep0out
fdisk findet die Platte nicht
Code
linvdr:~# fdisk -l
Disk /dev/hda: 255 heads, 63 sectors, 19457 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 19457 156288321 83 Linux
Code
linvdr:/boot# cat /etc/modules
#
# Audio-CD Support
cdfs
# usb keyboards
hid
keybdev
# VIA ME 6000 Sound
#snd-via82xx
#snd-pcm-oss
# USB storage
ehci-hcd
#ohci-hcd
uhci-hcd
scsi_mod
sd_mod
usb-storage
Alles anzeigen
Code
linvdr:/boot# cat /proc/modules
skystar2 28036 26 - Live 0xcec5a000
mt352 6916 1 skystar2, Live 0xcec4d000
nxt2002 8708 1 skystar2, Live 0xcec49000
budget_av 14592 0 - Live 0xceb4e000
tda10021 6660 1 budget_av, Live 0xcec42000
budget_ci 12672 0 - Live 0xceb53000
budget 9728 0 - Live 0xceb46000
budget_core 9604 3 budget_av,budget_ci,budget, Live 0xceb4a000
dvb_ttpci 90272 4 - Live 0xceb59000
l64781 7428 2 budget,dvb_ttpci, Live 0xceb26000
tda8083 6276 2 budget,dvb_ttpci, Live 0xceb23000
stv0297 8064 1 dvb_ttpci, Live 0xceb20000
sp8870 7428 1 dvb_ttpci, Live 0xceb17000
firmware_class 9984 6 skystar2,nxt2002,budget_av,budget_ci,dvb_ttpci,sp8870, Live 0xceb13000
ttpci_eeprom 3072 2 budget_core,dvb_ttpci, Live 0xce849000
saa7146_vv 46336 2 budget_av,dvb_ttpci, Live 0xceb30000
saa7146 18588 6 budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv, Live 0xceb1a000
mt312 7812 1 skystar2, Live 0xceb10000
cx24110 7684 0 - Live 0xcea6b000
tda1004x 12164 2 budget_av,budget_ci, Live 0xceaf6000
ves1820 6020 2 budget,dvb_ttpci, Live 0xceae3000
stv0299 10632 5 skystar2,budget_av,budget_ci,budget,dvb_ttpci, Live 0xceaf2000
ves1x93 6784 2 budget,dvb_ttpci, Live 0xce867000
i2c_core 23296 20 skystar2,mt352,nxt2002,budget_av,tda10021,budget_ci,budget,budget_core,dvb_ttpci,l64781,tda8083,stv0297,sp8870,ttpci_eeprom,mt312,cx24110,tda1004x,ves1820,stv0299,ves1x93, Live 0xceaeb000
dvb_core 78624 36 skystar2,budget_av,budget_ci,budget,budget_core,dvb_ttpci, Live 0xceafb000
video_buf 21248 1 saa7146_vv, Live 0xcea7d000
v4l2_common 6528 1 saa7146_vv, Live 0xce82a000
v4l1_compat 14080 1 saa7146_vv, Live 0xceade000
videodev 10240 1 saa7146_vv, Live 0xceada000
evdev 9600 1 - Live 0xcea8b000
b44 20608 0 - Live 0xcea84000
mii 5248 1 b44, Live 0xce857000
snd_via82xx 26016 0 - Live 0xcea75000
snd_ac97_codec 64480 1 snd_via82xx, Live 0xceaa8000
snd_pcm 91776 1 snd_via82xx, Live 0xcea90000
snd_timer 24576 1 snd_pcm, Live 0xcea6e000
snd_page_alloc 10376 2 snd_via82xx,snd_pcm, Live 0xce863000
gameport 4992 1 snd_via82xx, Live 0xce82d000
snd_mpu401_uart 7680 1 snd_via82xx, Live 0xce854000
snd_rawmidi 24096 1 snd_mpu401_uart, Live 0xce85c000
snd_seq_device 8324 1 snd_rawmidi, Live 0xce845000
snd 54432 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xcea56000
soundcore 10464 1 snd, Live 0xce841000
usb_storage 65920 0 - Live 0xce86a000
uhci_hcd 30600 0 - Live 0xce84b000
ehci_hcd 28032 0 - Live 0xce839000
cdfs 30496 0 - Live 0xce830000
Alles anzeigen
Code
linvdr:/boot# dmesg
: PCI BIOS revision 2.10 entry at 0xf1030, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 6 (level, low) -> IRQ 6
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 15 (level, low) -> IRQ 15
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 12 (level, low) -> IRQ 12
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
Simple Boot Flag at 0x3a set to 0x1
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 [EMAIL]okir@monad.swb.de[/EMAIL]).
NTFS driver 2.1.20 [Flags: R/W].
Initializing Cryptographic API
vesafb: framebuffer at 0xe8000000, mapped to 0xce880000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at cb4c:000c
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 KBD port at 0x60,0x64 irq 1
Using anticipatory io scheduler
floppy0: no floppy controllers found
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 11 (level, low) -> IRQ 11
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: ST3160023A, ATA DISK drive
hdb: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide1: Wait for ready failed before probe !
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver aiptek
drivers/usb/input/aiptek.c: v1.5 (May-15-2004): Bryan W. Headley/Chris Atenasio
drivers/usb/input/aiptek.c: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
PCI0 PCI1 USB0 USB3 USB1 USB2 AC97
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 144k freed
EXT3 FS on hda1, internal journal
cdfs 2.6.3a loaded.
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 11, pci mem ce828000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb 1-2: new high speed USB device using address 2
Adding 262136k swap on /var/vm/swapfile. Priority:-1 extents:67
b44.c:v0.94 (May 4, 2004)
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 12 (level, low) -> IRQ 12
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0e:a6:06:ce:f8
Linux video capture interface: v1.00
b44: eth0: Link is down.
saa7146: register extension 'dvb'.
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 12 (level, low) -> IRQ 12
saa7146: found saa7146 @ mem ceae6000 (revision 1, irq 12) (0x13c2,0x0003).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
adapter has MAC addr = 00:d0:5c:21:3e:3e
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261d
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
dvb-ttpci: found av7110-0.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget dvb /w video in'.
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found
drivers/media/dvb/b2c2/skystar2.c: the chip has 38 hardware filters
driver_initialize MAC address = 00:d0:d7:0a:8e:b4:00:00
DVB: registering new adapter (SkyStar2).
i2c_readbytes: i2c read error (addr 0a, err == -121)
DVB: registering frontend 1 (ST STV0299 DVB-S)...
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
usb 1-2: control timeout on ep0out
Alles anzeigen