Wie überhaupt anfangen mit einem VDR-System

drake008@ · 6. Juli 2012

Da ich in der neuen CT wieder auf ein VDR Projekt aufmerksam wurde stellen sich mir einige Fragen.

Zur Zeit läuft ein Windowssystem mit XBMC und DVBViewer zzgl. Plugins auf einem Core2Duo E6420, einer Audigy2 als Tongeber und einer TeVii S660 DVB-S2 Karte (extern!). Der Onboardsound funktioniert nicht mehr. Als Grafikkarte ist eine ATI Radeon 5770 verbaut.

Per Diseq wird Astra 19.2 und Astra 28.2 angepeilt.

Kann ich mit diesem System und dem Ubuntu 12.04LTS ein VDR aufbauen mit einem VDR der so aussieht wie Neutrino oder Enigma und von da aus dann zum Beispiel über die Fernbedienung das XBMC starten, sodass ich sozusagen einem TV gucken kann und auch auf Serien etc. zurückgreifen kann, die auf meinem NAS liegen?

Ich habe mir zwar die Anleitung durchgelesen in der CT. Leider kann ich keinerlei Dateien umschreiben obwohl mein Nutzer schon mittels usermod in die sudogruppe eingepflegt habe.

Die Firmwaredatei der TeVii habe ich aber ein neuer Kernel (Liplianin) soll wohl die ganzen Sachen schon beinhalten laut der TeVii-Seite.

Nur wie fange ich es an. Wenn es denn überhaupt möglich ist. Die Anleitungen (allesamt ohne 12.04) beschreiben ja nicht den Weg dahin, leider.

Könntet ihr mir helfen wie ich ein frisch aufgesetztes Ubuntu 12.04 modifizieren kann?
Vielen Dank

halbfertiger · 6. Juli 2012

Wenn du schnellen Erfolg haben willst, solltest du so vorgehen:

1. c't Artikel vergessen
2. ATI rausschmeisßen und VDPAU-fähige NVIDIA besorgen (ATI taugt für HDTV unter linux nichts)
3. spezielle Distribution für VDR besorgen (z. B. yaVDR, easyvdr)
4. sich etwas in (ya)VDR einlesen
5. separate Festplatte für VDR besorgen
6. installieren
7. mit Weboberfläche konfigurieren und sich über das Ergebnis freuen

Moorviper · 6. Juli 2012

Zitat

3. spezielle Distribution für VDR besorgen (z. B. yaVDR, easyvdr)
4. sich etwas in (ya)VDR einlesen

da nimmst du ihm ja die vorauswahl weg

aber hast schon recht
mein 1 wochentest mit der 0.5er pre verlief bisher ganz gut

ATD · 6. Juli 2012

drake008@

Lese mal das für die Grafikkarte durch und die Doku dazu.

Albert

drake008@ · 6. Juli 2012

Gut, kann ich also alles vergessen wegen der NVIDIA.

Dank euch trotzdem!

seahawk1986 · 6. Juli 2012

Zitat von drake008@

Gut, kann ich also alles vergessen wegen der NVIDIA.

Nein, wegen AMD/ATI - die zieren sich vernünftige Treiber mit hardwarebeschleunigtem Deinterlacing rauszubringen...

ATD · 6. Juli 2012

Zitat von drake008@

Gut, kann ich also alles vergessen wegen der NVIDIA.

Nein. Eine Asus ENGT520, noch besser ENGT430 kostet nicht die Welt. Wie Du in meine Signatur lesen kannst, kenne ich beide Welten.

Albert

drake008@ · 6. Juli 2012

Leider doch. Die Karte ist relativ neu und wenn ich noch eine Graka kaufe habe ich hier schon reichlich rumliegen.

Ich hätte jedoch noch eine AGP NVidia und ein 775er Board auf dem mein Prozessor noch laufen würde, wenn die reichen würde?

seahawk1986 · 6. Juli 2012

VDPAU können die nVidia-Karten erst ab der Geforce 8200 - wenn es HDTV sein soll, würde ich nicht unter eine G210 gehen.

ATD · 6. Juli 2012

Zitat von seahawk1986

wenn es HDTV sein soll, würde ich nicht unter eine G210 gehen

Die gibt es schon für 20 € und eBay nimmt Deine alte Karte bestimmt.

Albert

drake008@ · 17. Juli 2012

Ich habe mir heute eine ENGT430 geordert und werde versuchen yaVDR einzurichten. Das wird sicherlich nicht klappen bei meinem Glück in letzter Zeit!

ATD · 17. Juli 2012

Zitat von drake008@

Das wird sicherlich nicht klappen bei meinem Glück in letzter Zeit!

Nicht so pessimistisch. Mit der diseqc.conf wirst Du Dich auseinandersetzen müssen, fall Du FB hast, das ist auch so eine Position. Der Rest sollte Kindergeburtstag werden.

Albert

sinai · 17. Juli 2012

Sehe ich auch so. yaVDR und easyVDR haben beide ihre kleineren Problemchen. Diseq und fernbedienugstechnisch gibts mit easyVDR keine Proleme - dafür bestimmt andere.

Aber nachdem eine Installation grade mal 20 Minuten dauert (vermute mal yaVDR auch nicht länger) kannst du dir ja beide ansehen und entscheiden, was dir besser gefällt oder deinen Ansprüchen auf Anhieb besser taugt.

Ich vermute mal etwas nacharbeiten wird man immer müssen.

Andy

drake008@ · 19. Juli 2012

yavdr installiert und folgendes bei den diseq einstellungen reingeschrieben

Code

# port 1S28.2E  11700 V  9750  t v W15 [E0 10 23] W15 [E0 10 26] W15 tS28.2E  99999 V 10600  t v W15 [E0 10 23] W15 [E0 10 26] W15 TS28.2E  11700 H  9750  t V W15 [E0 10 23] W15 [E0 10 26] W15 tS28.2E  99999 H 10600  t V W15 [E0 10 23] W15 [E0 10 26] W15 T
# port 2S19.2E  11700 V  9750  t v W15 [E0 10 23] W15 [E0 10 22] W15 tS19.2E  99999 V 10600  t v W15 [E0 10 23] W15 [E0 10 22] W15 TS19.2E  11700 H  9750  t V W15 [E0 10 23] W15 [E0 10 22] W15 tS19.2E  99999 H 10600  t V W15 [E0 10 23] W15 [E0 10 22] W15 T

So ist das an meinem Diseq angeklemmt. In der Hauptconfig habe ich diseq auf 1 gesetzt.

Wähle ich einen der Testkanäle die ich in die Channels kopiert habe

Code

BBC HD;BSkyB:10847:VC89M2O25S1:S28.2E:23000:5500=27:5502=NAR@3;5501=eng@106:5503;5504=eng:0:6940:2:2050:0arte HD;ARD:11493:HC23M5O35S1:S19.2E:22000:5111=27:5112=deu@3,5113=fra@3;5116=deu@106:5114;5115=deu,5118=fra:0:10302:1:1019:0

Kriege ich immer Kanal nicht verfügbar.

Ist die TeVii S660 noch nicht aktiv? Die Firmwarefiles liegen im firmware Verzeichnis.

TheChief · 19. Juli 2012

Wo hast Du denn die disecq einstellung her?

Meine sieht so aus:

Code

S19.2E  11700 V  9750  t v [E0 10 38 F0] W15 t [E0 10 38 F0] W15 t [E0 10 38 F0] W15 t
S19.2E  99999 V  10600 t v [E0 10 38 F1] W15 T [E0 10 38 F1] W15 T [E0 10 38 F1] W15 T
S19.2E  11700 H  9750  t V [E0 10 38 F2] W15 t [E0 10 38 F2] W15 t [E0 10 38 F2] W15 t
S19.2E  99999 H  10600 t V [E0 10 38 F3] W15 T [E0 10 38 F3] W15 T [E0 10 38 F3] W15 T
# 
S28.2E  11700 V  9750  t v [E0 10 38 F4] W15 t [E0 10 38 F4] W15 t [E0 10 38 F4] W15 t
S28.2E  99999 V  10600 t v [E0 10 38 F5] W15 T [E0 10 38 F5] W15 T [E0 10 38 F5] W15 T
S28.2E  11700 H  9750  t V [E0 10 38 F6] W15 t [E0 10 38 F6] W15 t [E0 10 38 F6] W15 t
S28.2E  99999 H  10600 t V [E0 10 38 F7] W15 T [E0 10 38 F7] W15 T [E0 10 38 F7] W15 T

EDIT: Ach da fehlen die zeilenumbrüche bei dir. Disecq im VDR Setup aktiviert? Würd auch mal andere Kanäle auf 19.2 testen.

drake008@ · 19. Juli 2012

Wo würde ich denn sehen können ob er die S660 überhaupt anzieht?
Im Kernellog sehe ich nichts dergleichen.

Die Lipli... Treiber braucht man ja mit der Karte nicht laut Website.

TheChief · 19. Juli 2012

Wer zieht was an?

/var/log/dmesg, syslog

drake008@ · 19. Juli 2012

Nachdem ich unter DVB setting mal das device auf 9 geändert habe, habe ich endlich Bild. Merkwürdig.

drake008@ · 19. Juli 2012

und nach einem Neustart habe ich wieder keinen Empfang.

drake008@ · 19. Juli 2012

Zitat von TheChief

Wer zieht was an?

/var/log/dmesg, syslog

Wenn ich die anzeigen möchte bekomme ich immer permission denied

Liegt das an dem USB dongle der Logitech K400 Tastatur?

Code

Dashboard      Settings      System   DiagnosticsSystem informationSystem loadNetwork statusFilesystem usageKernel log    Refresh      Go to the end      Send to PasteBin   [    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-15-generic (buildd@komainu) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #64-Ubuntu SMP Fri Jul 6 18:51:28 UTC 2012 (Ubuntu 2.6.38-15.64-generic 2.6.38.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-15-generic root=UUID=2e18f6b6-03da-42b2-bc6d-ea9769b8be5a ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[    0.000000]  BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: System manufacturer P5KR/P5KR, BIOS 0703    06/26/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   2 base 000000000 mask F00000000 write-back
[    0.000000]   3 base 100000000 mask FE0000000 write-back
[    0.000000]   4 base 120000000 mask FF0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[    0.000000]  0000000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cff80000 page 4k
[    0.000000] kernel direct mapping tables up to cff80000 @ 1fffa000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[    0.000000]  0100000000 - 0130000000 page 2M
[    0.000000] kernel direct mapping tables up to 130000000 @ cff7a000-cff80000
[    0.000000] RAMDISK: 36620000 - 37308000
[    0.000000] ACPI: RSDP 00000000000fbcd0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT  06000826 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP  06000826 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cff80440 090AB (v01  A0871 A0871020 00000020 INTL 20060113)
[    0.000000] ACPI: FACS 00000000cff8e000 00040
[    0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC  06000826 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG  06000826 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM  06000826 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cff894f0 00038 (v01 A_M_I_ OEMHPET  06000826 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000cff89530 000B0 (v01 A_M_I_ OEMOSFR  06000826 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000130000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[    0.000000]   NODE_DATA [000000012fffb000 - 000000012fffffff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012be00000-ffff88012f7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00130000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x000cff80
[    0.000000]     0: 0x00100000 -> 0x00130000
[    0.000000] On node 0 totalpages: 1048334
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833464 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[    0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
[    0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cfc00000 s84416 r8192 d22080 u524288
[    0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031304
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-15-generic root=UUID=2e18f6b6-03da-42b2-bc6d-ea9769b8be5a ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4040772k/4980736k available (5969k kernel code, 787400k absent, 152564k reserved, 4989k data, 960k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 41943040 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2137.990 MHz processor.
[    0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4275.98 BogoMIPS (lpj=21379900)
[    0.010009] pid_max: default: 32768 minimum: 301
[    0.010039] Security Framework initialized
[    0.010059] AppArmor: AppArmor initialized
[    0.010060] Yama: becoming mindful.
[    0.010539] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012752] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.013877] Mount-cache hash table entries: 256
[    0.014050] Initializing cgroup subsys ns
[    0.014056] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.014059] Initializing cgroup subsys cpuacct
[    0.014063] Initializing cgroup subsys memory
[    0.014073] Initializing cgroup subsys devices
[    0.014075] Initializing cgroup subsys freezer
[    0.014077] Initializing cgroup subsys net_cls
[    0.014080] Initializing cgroup subsys blkio
[    0.014119] CPU: Physical Processor ID: 0
[    0.014121] CPU: Processor Core ID: 0
[    0.014123] mce: CPU supports 6 MCE banks
[    0.014132] CPU0: Thermal monitoring enabled (TM1)
[    0.014137] using mwait in idle threads.
[    0.016821] ACPI: Core revision 20110112
[    0.030012] ftrace: allocating 24407 entries in 96 pages
[    0.040058] Setting APIC routing to flat
[    0.040359] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.145072] CPU0: Intel(R) Core(TM)2 CPU          6420  @ 2.13GHz stepping 06
[    0.150000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.150000] PEBS disabled due to CPU errata.
[    0.150000] ... version:                2
[    0.150000] ... bit width:              40
[    0.150000] ... generic registers:      2
[    0.150000] ... value mask:             000000ffffffffff
[    0.150000] ... max period:             000000007fffffff
[    0.150000] ... fixed-purpose events:   3
[    0.150000] ... event mask:             0000000700000003
[    0.150000] Booting Node   0, Processors  #1
[    0.310021] Brought up 2 CPUs
[    0.310025] Total of 2 processors activated (8552.36 BogoMIPS).
[    0.311304] devtmpfs: initialized
[    0.311304] print_constraints: dummy: 
[    0.311304] Time: 15:37:50  Date: 07/19/12
[    0.311304] NET: Registered protocol family 16
[    0.311304] Trying to unpack rootfs image as initramfs...
[    0.311304] ACPI: bus type pci registered
[    0.311304] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.311304] PCI: not using MMCONFIG
[    0.311304] PCI: Using configuration type 1 for base access
[    0.320347] bio: create slab <bio-0> at 0
[    0.321571] ACPI: EC: Look up EC in DSDT
[    0.323009] ACPI: Executed 1 blocks of module-level executable AML code
[    0.328230] ACPI: SSDT 00000000cff8e0d0 001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.328571] ACPI: Dynamic OEM Table Load:
[    0.328574] ACPI: SSDT           (null) 001D2 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.328759] ACPI: SSDT 00000000cff8e2b0 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.329100] ACPI: Dynamic OEM Table Load:
[    0.329103] ACPI: SSDT           (null) 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.329275] ACPI: Interpreter enabled
[    0.329279] ACPI: (supports S0 S1 S3 S4 S5)
[    0.329302] ACPI: Using IOAPIC for interrupt routing
[    0.329327] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.330169] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.384180] ACPI: No dock devices found.
[    0.384184] HEST: Table not found.
[    0.384187] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.384258] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.384401] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.384404] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.384407] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.384409] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[    0.384411] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[    0.384430] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[    0.384496] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    0.384539] pci 0000:00:1a.0: reg 20: [io  0xc800-0xc81f]
[    0.384583] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    0.384624] pci 0000:00:1a.1: reg 20: [io  0xc880-0xc89f]
[    0.384674] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[    0.384716] pci 0000:00:1a.2: reg 20: [io  0xcc00-0xcc1f]
[    0.384768] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    0.384789] pci 0000:00:1a.7: reg 10: [mem 0xf5fffc00-0xf5ffffff]
[    0.384863] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.384867] pci 0000:00:1a.7: PME# disabled
[    0.384888] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    0.384941] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.384945] pci 0000:00:1c.0: PME# disabled
[    0.384973] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    0.385014] pci 0000:00:1d.0: reg 20: [io  0xc080-0xc09f]
[    0.385058] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    0.385102] pci 0000:00:1d.1: reg 20: [io  0xc400-0xc41f]
[    0.385145] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    0.385188] pci 0000:00:1d.2: reg 20: [io  0xc480-0xc49f]
[    0.385239] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    0.385260] pci 0000:00:1d.7: reg 10: [mem 0xf5fff800-0xf5fffbff]
[    0.385331] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.385336] pci 0000:00:1d.7: PME# disabled
[    0.385355] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.385415] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
[    0.385495] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.385538] pci 0000:00:1f.2: [8086:2923] type 0 class 0x000106
[    0.385559] pci 0000:00:1f.2: reg 10: [io  0xbc00-0xbc07]
[    0.385568] pci 0000:00:1f.2: reg 14: [io  0xb880-0xb883]
[    0.385576] pci 0000:00:1f.2: reg 18: [io  0xb800-0xb807]
[    0.385585] pci 0000:00:1f.2: reg 1c: [io  0xb480-0xb483]
[    0.385593] pci 0000:00:1f.2: reg 20: [io  0xb400-0xb41f]
[    0.385601] pci 0000:00:1f.2: reg 24: [mem 0xf5ffe800-0xf5ffefff]
[    0.385634] pci 0000:00:1f.2: PME# supported from D3hot
[    0.385637] pci 0000:00:1f.2: PME# disabled
[    0.385654] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[    0.385669] pci 0000:00:1f.3: reg 10: [mem 0xf5fff400-0xf5fff4ff 64bit]
[    0.385690] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.385765] pci 0000:01:00.0: [10de:0de1] type 0 class 0x000300
[    0.385779] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[    0.385795] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[    0.385811] pci 0000:01:00.0: reg 1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[    0.385822] pci 0000:01:00.0: reg 24: [io  0xdc00-0xdc7f]
[    0.385833] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[    0.385895] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403
[    0.385909] pci 0000:01:00.1: reg 10: [mem 0xf7ffc000-0xf7ffffff]
[    0.400027] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.400033] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.400037] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.400042] pci 0000:00:1c.0:   bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[    0.400081] pci 0000:02:00.0: [1102:0005] type 0 class 0x000401
[    0.400101] pci 0000:02:00.0: reg 10: [io  0xec00-0xec1f]
[    0.400115] pci 0000:02:00.0: reg 14: [mem 0xfea00000-0xfebfffff 64bit]
[    0.400131] pci 0000:02:00.0: reg 1c: [mem 0xf8000000-0xfbffffff 64bit]
[    0.400172] pci 0000:02:00.0: supports D1 D2
[    0.400192] pci 0000:02:01.0: [10ec:8169] type 0 class 0x000200
[    0.400209] pci 0000:02:01.0: reg 10: [io  0xe800-0xe8ff]
[    0.400219] pci 0000:02:01.0: reg 14: [mem 0xfe9ffc00-0xfe9ffcff]
[    0.400261] pci 0000:02:01.0: reg 30: [mem 0xfe9c0000-0xfe9dffff pref]
[    0.400279] pci 0000:02:01.0: supports D1 D2
[    0.400281] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[    0.400286] pci 0000:02:01.0: PME# disabled
[    0.400329] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.400334] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.400337] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff]
[    0.400343] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.400346] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.400349] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.400352] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.400354] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.400357] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[    0.400374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.400511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.400637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.400668]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.407169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.407221] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.407270] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.407318] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.407368] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.407418] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.407466] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.407515] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.407661] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.407666] vgaarb: loaded
[    0.407863] SCSI subsystem initialized
[    0.407942] libata version 3.00 loaded.
[    0.407997] usbcore: registered new interface driver usbfs
[    0.408009] usbcore: registered new interface driver hub
[    0.408035] usbcore: registered new device driver usb
[    0.408152] wmi: Mapper loaded
[    0.408155] PCI: Using ACPI for IRQ routing
[    0.408158] PCI: pci_cache_line_size set to 64 bytes
[    0.408232] reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
[    0.408234] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff 
[    0.408343] NetLabel: Initializing
[    0.408344] NetLabel:  domain hash size = 128
[    0.408346] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.408359] NetLabel:  unlabeled traffic allowed by default
[    0.408399] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.408403] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.408409] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.430074] Switching to clocksource hpet
[    0.438320] AppArmor: AppArmor Filesystem Enabled
[    0.438360] pnp: PnP ACPI init
[    0.438381] ACPI: bus type pnp registered
[    0.438493] pnp 00:00: [bus 00-ff]
[    0.438496] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.438498] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.438501] pnp 00:00: [io  0x0d00-0xffff window]
[    0.438503] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.438506] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.438508] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[    0.438585] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.438596] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.438659] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.438662] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.438699] pnp 00:02: [dma 4]
[    0.438701] pnp 00:02: [io  0x0000-0x000f]
[    0.438703] pnp 00:02: [io  0x0081-0x0083]
[    0.438705] pnp 00:02: [io  0x0087]
[    0.438707] pnp 00:02: [io  0x0089-0x008b]
[    0.438708] pnp 00:02: [io  0x008f]
[    0.438710] pnp 00:02: [io  0x00c0-0x00df]
[    0.438737] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.438749] pnp 00:03: [io  0x0070-0x0071]
[    0.438763] pnp 00:03: [irq 8]
[    0.438794] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.438803] pnp 00:04: [io  0x0061]
[    0.438830] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.438840] pnp 00:05: [io  0x00f0-0x00ff]
[    0.438845] pnp 00:05: [irq 13]
[    0.438876] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.439174] pnp 00:06: [irq 6]
[    0.439176] pnp 00:06: [dma 2]
[    0.439178] pnp 00:06: [io  0x03f0-0x03f5]
[    0.439180] pnp 00:06: [io  0x03f7]
[    0.439241] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.439274] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.439276] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    0.439279] pnp 00:07: [io  0x0290-0x0297]
[    0.439332] system 00:07: [io  0x0290-0x0297] has been reserved
[    0.439336] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.439437] pnp 00:08: [io  0x0010-0x001f]
[    0.439440] pnp 00:08: [io  0x0022-0x003f]
[    0.439442] pnp 00:08: [io  0x0044-0x004d]
[    0.439448] pnp 00:08: [io  0x0050-0x005f]
[    0.439450] pnp 00:08: [io  0x0062-0x0063]
[    0.439452] pnp 00:08: [io  0x0065-0x006f]
[    0.439454] pnp 00:08: [io  0x0072-0x007f]
[    0.439456] pnp 00:08: [io  0x0080]
[    0.439458] pnp 00:08: [io  0x0084-0x0086]
[    0.439459] pnp 00:08: [io  0x0088]
[    0.439461] pnp 00:08: [io  0x008c-0x008e]
[    0.439463] pnp 00:08: [io  0x0090-0x009f]
[    0.439465] pnp 00:08: [io  0x00a2-0x00bf]
[    0.439467] pnp 00:08: [io  0x00e0-0x00ef]
[    0.439469] pnp 00:08: [io  0x04d0-0x04d1]
[    0.439470] pnp 00:08: [io  0x0800-0x087f]
[    0.439472] pnp 00:08: [io  0x0400-0x03ff disabled]
[    0.439474] pnp 00:08: [io  0x0480-0x04bf]
[    0.439476] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.439478] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[    0.439481] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[    0.439483] pnp 00:08: [mem 0xffa00000-0xffafffff]
[    0.439485] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[    0.439487] pnp 00:08: [mem 0xffe00000-0xffefffff]
[    0.439489] pnp 00:08: [mem 0xfff00000-0xfffffffe]
[    0.439559] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.439562] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.439565] system 00:08: [io  0x0480-0x04bf] has been reserved
[    0.439568] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.439570] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.439573] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.439576] system 00:08: [mem 0xffa00000-0xffafffff] has been reserved
[    0.439579] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.439581] system 00:08: [mem 0xffe00000-0xffefffff] has been reserved
[    0.439584] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.439587] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.439655] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    0.439691] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.439853] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[    0.439856] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[    0.439904] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.439908] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.439911] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.439949] pnp 00:0b: [io  0x0060]
[    0.439951] pnp 00:0b: [io  0x0064]
[    0.439956] pnp 00:0b: [irq 1]
[    0.439956] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.439956] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[    0.439974] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.439977] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.440164] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[    0.440166] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[    0.440168] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[    0.440170] pnp 00:0d: [mem 0x00100000-0xcfffffff]
[    0.440173] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.440238] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.440241] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[    0.440244] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.440246] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.440250] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.440386] pnp: PnP ACPI: found 14 devices
[    0.440388] ACPI: ACPI bus type pnp unregistered
[    0.446802] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf707ffff pref]
[    0.446806] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.446810] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.446815] pci 0000:00:1c.0:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.446819] pci 0000:00:1c.0:   bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[    0.446825] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.446828] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.446833] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff]
[    0.446837] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.446859] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.446864] pci 0000:00:1c.0: setting latency timer to 64
[    0.446871] pci 0000:00:1e.0: setting latency timer to 64
[    0.446875] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.446878] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.446880] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.446883] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.446885] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[    0.446888] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.446890] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.446892] pci_bus 0000:01: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[    0.446895] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.446897] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfebfffff]
[    0.446899] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.446902] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.446904] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.446906] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
[    0.446908] pci_bus 0000:02: resource 8 [mem 0xd0000000-0xffffffff]
[    0.446949] NET: Registered protocol family 2
[    0.447120] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.448416] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.452698] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.453296] TCP: Hash tables configured (established 524288 bind 65536)
[    0.453298] TCP reno registered
[    0.453310] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.453354] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.453505] NET: Registered protocol family 1
[    0.453686] pci 0000:01:00.0: Boot video device
[    0.453707] PCI: CLS 32 bytes, default 64
[    0.453709] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.453713] Placing 64MB software IO TLB between ffff8800cbc00000 - ffff8800cfc00000
[    0.453715] software IO TLB at phys 0xcbc00000 - 0xcfc00000
[    0.454106] audit: initializing netlink socket (disabled)
[    0.454117] type=2000 audit(1342712269.450:1): initialized
[    0.468214] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.470114] VFS: Disk quotas dquot_6.5.2
[    0.470171] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.470817] fuse init (API version 7.16)
[    0.470905] msgmni has been set to 7892
[    0.471147] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.471175] io scheduler noop registered
[    0.471177] io scheduler deadline registered
[    0.471219] io scheduler cfq registered (default)
[    0.471332] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.471376] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.471459] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.471483] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.471531] intel_idle: MWAIT substates: 0x20
[    0.471533] intel_idle: does not run on family 6 model 15
[    0.471646] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.471652] ACPI: Power Button [PWRB]
[    0.471703] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.471707] ACPI: Power Button [PWRF]
[    0.471882] ACPI: acpi_idle registered with cpuidle
[    0.473446] ERST: Table is not found!
[    0.473541] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.581383] Freeing initrd memory: 13216k freed
[    1.450018] Refined TSC clocksource calibration: 2138.181 MHz.
[    1.450025] Switching to clocksource tsc
[    2.800448] Linux agpgart interface v0.103
[    2.801805] brd: module loaded
[    2.802382] loop: module loaded
[    2.802475] i2c-core: driver [adp5520] using legacy suspend method
[    2.802477] i2c-core: driver [adp5520] using legacy resume method
[    2.802904] Fixed MDIO Bus: probed
[    2.802933] PPP generic driver version 2.4.2
[    2.802973] tun: Universal TUN/TAP device driver, 1.6
[    2.802975] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.803060] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.803091] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.803110] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    2.803114] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    2.803150] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.830043] ehci_hcd 0000:00:1a.7: debug port 1
[    2.833910] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    2.833929] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf5fffc00
[    2.850008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.850126] hub 1-0:1.0: USB hub found
[    2.850132] hub 1-0:1.0: 6 ports detected
[    2.850212] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.850223] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.850226] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.850261] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.880031] ehci_hcd 0000:00:1d.7: debug port 1
[    2.883898] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.883910] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5fff800
[    2.900007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.900107] hub 2-0:1.0: USB hub found
[    2.900111] hub 2-0:1.0: 6 ports detected
[    2.900187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.900199] uhci_hcd: USB Universal Host Controller Interface driver
[    2.900254] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.900262] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.900265] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.900303] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.940032] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[    2.940163] hub 3-0:1.0: USB hub found
[    2.940168] hub 3-0:1.0: 2 ports detected
[    2.940237] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.940243] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    2.940246] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.940280] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.970036] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[    2.970154] hub 4-0:1.0: USB hub found
[    2.970158] hub 4-0:1.0: 2 ports detected
[    2.970228] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.970235] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    2.970238] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.970272] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    3.000043] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[    3.000158] hub 5-0:1.0: USB hub found
[    3.000167] hub 5-0:1.0: 2 ports detected
[    3.000230] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.000237] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.000240] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.000279] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    3.030024] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[    3.030140] hub 6-0:1.0: USB hub found
[    3.030144] hub 6-0:1.0: 2 ports detected
[    3.030212] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.030218] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.030221] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.030269] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    3.060037] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[    3.060154] hub 7-0:1.0: USB hub found
[    3.060158] hub 7-0:1.0: 2 ports detected
[    3.060222] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.060228] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.060231] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.060268] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    3.090024] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[    3.090140] hub 8-0:1.0: USB hub found
[    3.090144] hub 8-0:1.0: 2 ports detected
[    3.130044] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    3.130046] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    3.130529] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.130624] mousedev: PS/2 mouse device common for all mice
[    3.130757] rtc_cmos 00:03: RTC can wake from S4
[    3.160058] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.160081] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.160181] device-mapper: uevent: version 1.0.3
[    3.160256] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    3.160332] device-mapper: multipath: version 1.2.0 loaded
[    3.160335] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.160460] cpuidle: using governor ladder
[    3.160462] cpuidle: using governor menu
[    3.160711] TCP cubic registered
[    3.160831] NET: Registered protocol family 10
[    3.161358] NET: Registered protocol family 17
[    3.161374] Registering the dns_resolver key type
[    3.161779] registered taskstats version 1
[    3.162005]   Magic number: 4:605:639
[    3.162092] rtc_cmos 00:03: setting system clock to 2012-07-19 15:37:52 UTC (1342712272)
[    3.162095] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.162097] EDD information not available.
[    3.163981] Freeing unused kernel memory: 960k freed
[    3.164271] Write protecting the kernel read-only data: 10240k
[    3.164963] Freeing unused kernel memory: 156k freed
[    3.170239] Freeing unused kernel memory: 1432k freed
[    3.187298] <30>udev[63]: starting version 167
[    3.209569] vesafb: framebuffer at 0xd7000000, mapped to 0xffffc90011100000, using 3072k, total 3072k
[    3.209574] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    3.209576] vesafb: scrolling: redraw
[    3.209578] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.209706] Console: switching to colour frame buffer device 128x48
[    3.209728] fb0: VESA VGA frame buffer device
[    3.287730] ahci 0000:00:1f.2: version 3.0
[    3.287756] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    3.287798] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    3.287839] ahci: SSS flag set, parallel bus scan disabled
[    3.287866] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    3.287870] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs 
[    3.287875] ahci 0000:00:1f.2: setting latency timer to 64
[    3.297690] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.297709] r8169 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    3.297734] r8169 0000:02:01.0: (unregistered net_device): no PCI Express capability
[    3.298220] r8169 0000:02:01.0: eth0: RTL8169sb/8110sb at 0xffffc9000065ac00, 00:08:54:52:d9:cb, XID 10000000 IRQ 17
[    3.300619] Floppy drive(s): fd0 is 1.44M
[    3.323646] FDC 0 is a post-1991 82077
[    3.340659] scsi0 : ahci
[    3.340780] scsi1 : ahci
[    3.340855] scsi2 : ahci
[    3.340928] scsi3 : ahci
[    3.341000] scsi4 : ahci
[    3.341072] scsi5 : ahci
[    3.341237] ata1: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffe900 irq 41
[    3.341240] ata2: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffe980 irq 41
[    3.341242] ata3: DUMMY
[    3.341243] ata4: DUMMY
[    3.341246] ata5: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffeb00 irq 41
[    3.341248] ata6: SATA max UDMA/133 abar m2048@0xf5ffe800 port 0xf5ffeb80 irq 41
[    3.490009] usb 5-2: new full speed USB device using uhci_hcd and address 2
[    3.740085] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input2
[    3.740179] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.2-2/input0
[    3.744568] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input3
[    3.744766] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.2-2/input1
[    3.750148] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.2-2/input2
[    3.750166] usbcore: registered new interface driver usbhid
[    3.750168] usbhid: USB HID core driver
[    3.890016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.890846] ata1.00: ATA-7: ST920217AS, 3.01, max UDMA/100
[    3.890849] ata1.00: 39070080 sectors, multi 0: LBA48 NCQ (depth 1)
[    3.891720] ata1.00: configured for UDMA/100
[    3.891836] scsi 0:0:0:0: Direct-Access     ATA      ST920217AS       3.01 PQ: 0 ANSI: 5
[    3.892003] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.892030] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    3.892111] sd 0:0:0:0: [sda] Write Protect is off
[    3.892115] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.892140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.932742]  sda: sda1 sda2 < sda5 >
[    3.933043] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.240012] ata2: SATA link down (SStatus 0 SControl 300)
[    4.590011] ata5: SATA link down (SStatus 0 SControl 300)
[    5.140010] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.143986] ata6.00: ATAPI: HL-DT-ST BDDVDRW GGC-H20L, 1.03, max UDMA/133
[    5.149389] ata6.00: configured for UDMA/133
[    5.264845] scsi 5:0:0:0: CD-ROM            HL-DT-ST BDDVDRW GGC-H20L 1.03 PQ: 0 ANSI: 5
[    5.375097] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.375100] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.375203] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    5.375266] sr 5:0:0:0: Attached scsi generic sg1 type 5
[    5.909793] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    5.909797] EXT4-fs (sda1): write access will be enabled during recovery
[    6.020869] EXT4-fs (sda1): recovery complete
[    6.021374] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.236970] <30>udev[313]: starting version 167
[   19.257084] lp: driver loaded but no devices found
[   19.321132] Adding 4193276k swap on /dev/sda5.  Priority:-1 extents:1 across:4193276k 
[   19.524298] asus_atk0110: Resources not safely usable due to acpi_enforce_resources kernel parameter
[   19.533930] nvidia: module license 'NVIDIA' taints kernel.
[   19.533935] Disabling lock debugging due to kernel taint
[   20.364503] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.780318] RPC: Registered udp transport module.
[   20.780321] RPC: Registered tcp transport module.
[   20.780323] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.803706] FS-Cache: Loaded
[   20.848859] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.848869] nvidia 0000:01:00.0: setting latency timer to 64
[   20.848875] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   20.851626] FS-Cache: Netfs 'nfs' registered for caching
[   20.885779] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   20.940279] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  270.41.06  Mon Apr 18 14:53:56 PDT 2011
[   21.096928] r8169 0000:02:01.0: eth0: link down
[   21.097387] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.180061] SB-XFi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   21.445270] svc: failed to register lockdv1 RPC service (errno 97).
[   21.445310] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   21.457552] NFSD: starting 90-second grace period
[   21.462684] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   21.462689] hda_intel: Disable MSI for Nvidia chipset
[   21.462716] HDA Intel 0000:01:00.1: setting latency timer to 64
[   24.115632] r8169 0000:02:01.0: eth0: link up
[   24.116184] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   34.950008] eth0: no IPv6 routers present

Alles anzeigen

Wie überhaupt anfangen mit einem VDR-System

Jetzt mitmachen!

Teilen