Hi zusammen,
habe grade mit einem Freund versucht nen vdr aufzubauen. Dieser hat eine sehr alte WinTV Karte.
Leider steht nicht viel auf der Karte drauf.
Aber ich hab mal ein paar Infos:
Logread
http://phpfi.com/198974
lspci -v
02:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 32, IRQ 201
Memory at ec8ff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
02:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Hauppauge computer works Inc. WinTV Series
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at ec8fe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
dmesg
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.8.1 (v4l-dvb + ivtv virtual merge) Revision: 3596 loading
ivtv: Linux version: 2.6.18 preempt mod_unload 386 gcc-4.0
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
eth0: forcedeth.c: subsystem: 01849:00df bound to 0000:00:05.0
ivtv: ==================== END INIT IVTV ====================
ivtv-osd: ivtv_fb_card_id parameter is out of range (valid range: 0--1)
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 201
bttv0: Bt878 (rev 17) at 0000:02:07.0, irq: 201, latency: 32, mmio: 0xec8ff000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tveeprom 0-0050: Hauppauge model 61344, rev D421, serial# 3889023
tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 0-0050: audio processor is MSP3415 (idx 6)
tveeprom 0-0050: has radio
bttv0: Hauppauge eeprom indicates model#61344
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... found
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
Vieleicht kennt jemand diese Karte uns weiss ob sie mit dem VDR zusammen laufen kann?
Danke & Gruß
Christian