hallo,
hab auf meiner hardware (siehe unten) c't vdr 5 installiert.
funktioniert auch nach ein paar tagen fummeln soweit alles.
das prob was ich aber noch hab ist das mein nvram wakeup nicht laufen will.
meine vorgehensweise:
da mein mainboard ( asus cusi-m mit sis chipsatzt und p3 800) nicht autimatsich erkannt wurde habe ich das guess-helper skript gestartet.
da mir das mit dem direktisa nix sag hab ich mich für nvram entschieden.
folgende nvram-wakeup.conf wurde erstellt:
################################################
## Mainboard autodetection information:
##
## - Mainboard vendor: "ASUSTeK Computer INC."
## - Mainboard type: "CUSI-M"
## - Mainboard revision: "REV 1.xx"
## - BIOS vendor: "Award Software, Inc."
## - BIOS version: "ASUS CUSI-M ACPI BIOS Revision 1009"
## - BIOS release: "06/07/2001"
addr_stat = 0x56
shift_stat = 4
addr_stat = 0x6D # but differs somewhere else
shift_stat = 4
addr_stat = 0x70 # but differs somewhere else
addr_chk_h = 0x56 # guessed
addr_chk_l = 0x57
Alles anzeigen
ich hab die dann nach /etc/ kopiert und die alte überschieben.
danach hab ich die
bearbeitet und wie folgt geändert:
#
# Configuration file for the VDR nvram-wakeup shutdown hook
#
# This is NOT the nvram-wakeup configuration file, which you can find in
# /etc/nvram-wakeup.conf and which must be set in COMMANDLINE (see below),
# if your mainboard ins not detected automatically.
#
# Set to "yes" to enable nvram-wakeup for VDR
#
ENABLED="yes"
# Here you can specify additional command line parameters, that will be passed
# to nvram-wakeup.
#
# i.e.:
# COMMANDLINE="-I ecs_k7s5au" # mainboard of type K7S5au
# COMMANDLINE="-C /etc/nvram-wakeup.conf" # use config file
#
# see "man nvram-wakeup"
#
COMMANDLINE="-C /etc/nvram-wakeup.conf"
# If your mainboard needs to reboot before shutting down, set the command(s) to
# do this here. i.e.:
#
# SPECIALSHUTDOWN="lilo -R PowerOff ; shutdown -r now"
#
SPECIALSHUTDOWN="echo y|grub-reboot 2"
# To force a reboot whenever nvram-wakeup sets the time, independently of
# whether a reboot is required, enable this option.
#
FORCE_REBOOT="yes"
#
# If you want your VDR machine to wakeup in regular intervals (i.e. for
# updating EPG data), specify a day interval and a wakeup time:
#
REGULAR_DAYS=0 # 0=disabled, 1=each day, 2=each 2'nd day, 3=...
REGULAR_TIME=01:00 # HH:MM
Alles anzeigen
danach in /boot/grub/menu.lst folgenden Eintrag hinzufügen:
und zum schluss noch :
sowie "nvram" in die /etc/modules eingetragen
zum schluss dann rebootet.
wenn ich jetzt einen timer im osd erstelle und den vdr ausschalte steht im osd:
"nvram-wakeup could not set timer"
mach ich hier was falsch bzw. hab ich was vergessen.
ich bin nicht der linux crack darum hoffe ich um ein wenig hilfe.
thx
mfg
mrtom