Hallo alle, ich brauche Hilfe.
Habe mir die DVBSky S952 V3 zugelegt, und mit vanilla kernel 4.4 schien alles einwandfrei zu laufen (also die Karte wird erkannt [1]), bis auf das tuning der Sender:
Code
$ scan -vvvv -a100 /usr/share/dvb/dvb-s/Astra-19.2E
scanning /usr/share/dvb/dvb-s/Astra-19.2E
using '/dev/dvb/adapter100/frontend0' and '/dev/dvb/adapter100/demux0'
initial transponder 12551500 V 22000000 5
>>> tune to: 12551:v:0:22000
DiSEqC: switch pos 0, 13V, hiband (index 2)
diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00
DVB-S IF freq is 1951500
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
>>> tune to: 12551:v:0:22000 (tuning failed)
DiSEqC: switch pos 0, 13V, hiband (index 2)
diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00
DVB-S IF freq is 1951500
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
>>> tuning status == 0x00
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
Alles anzeigen
Ich habe es dann nochmal mit
- den Treibern auf http://www.dvbsky.net/Support_linux.html
- den Treibern auf https://git.linuxtv.org//media_build.git/about/
versucht, mit dem gleichen Ergebnis.
Wird der Kabel an einem stand-alone Sat receiver angeschlossen funktioniert der Sendersuchlauf einwandfrei.
Der Kabel ist direkt am LNB befestigt, also kein DiSEqC Problem oder so.
Kann mir jemand da weiterhelfen? Ist die Karte defekt?
[1] dmesg output
Code
[ 1.552965] SMI PCIe driver 0000:02:00.0: card detected: DVBSky S952 V3
[ 1.661855] DVB: registering new adapter (SMI_DVB)
[ 1.924409] SMI PCIe driver 0000:02:00.0: DVB: registering adapter 1
frontend 0 (Montage Technology M88RS6000)...
[ 1.931618] SMI PCIe driver 0000:02:00.0: DVBSky S952 V3 port 0 MAC:
00:18:42:54:55:52
[ 1.931646] DVB: registering new adapter (SMI_DVB)
[ 2.045026] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc1/input21
[ 2.045491] rc rc1: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc1
[ 2.184704] SMI PCIe driver 0000:02:00.0: DVB: registering adapter 2
frontend 0 (Montage Technology M88RS6000)...
[ 2.191488] SMI PCIe driver 0000:02:00.0: DVBSky S952 V3 port 1 MAC:
00:18:32:54:55:53
[ 2.216551] Registered IR keymap rc-dvbsky
[ 2.216663] input: IR (DVBSky S952 V3) as
/devices/pci0000:00/0000:00:1b.2/0000:02:00.0/rc/rc2/input22
[ 2.216863] rc rc2: IR (DVBSky S952 V3) as
/devices/pci0000:00/0000:00:1b.2/0000:02:00.0/rc/rc2
[ 2.481094] usbcore: registered new interface driver dvb_usb_dib0700
[ 169.957099] m88ds3103 6-0069: downloading firmware from file
'dvb-demod-m88rs6000.fw'
Alles anzeigen
Edit: also ich glaube ich und die Eike haben das selbe Problem.