Hallo,
nachdem ich leider mit der Anysee und CAM suppirt nicht weiter kam, überlege ich mir die Cine S2 V6 zu kaufen.
Da ich gerne SKY-Sender schaue, funktioniert dort das CAM? Habe AlphaCrypt Classic.
Wäre über die Info sehr dankbar
Hallo,
nachdem ich leider mit der Anysee und CAM suppirt nicht weiter kam, überlege ich mir die Cine S2 V6 zu kaufen.
Da ich gerne SKY-Sender schaue, funktioniert dort das CAM? Habe AlphaCrypt Classic.
Wäre über die Info sehr dankbar
Hallo,
nachdem ich leider mit der Anysee und CAM suppirt nicht weiter kam, überlege ich mir die Cine S2 V6 zu kaufen.
Da ich gerne SKY-Sender schaue, funktioniert dort das CAM? Habe AlphaCrypt Classic.
Wäre über die Info sehr dankbar
Status ist unverändert: CI wird vom Treiber zwar unterstützt, jedoch nicht von Applikationen wie VDR.
CU
Oliver
hi ufo,
habe im git-repo media_tree gesehen das einige sachen von dir eingeflossen sind.
wollte darauf hinweisen:
cp -r ngene-octopus-test/linux/drivers/media/dvb/{ngene,ddbridge} ../linux/drivers/media/dvb
patch -p0 < ngene-octopus-test.dvb-kconfig.diff
patching file ../linux/drivers/media/dvb/Kconfig
Hunk #1 succeeded at 84 with fuzz 2 (offset 4 lines).
patch -p0 < ngene-octopus-test.dvb-makefile.diff
patching file ../linux/drivers/media/dvb/Makefile
Reversed (or previously applied) patch detected! Assume -R? [n] n
Apply anyway? [n] n
Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file ../linux/drivers/media/dvb/Makefile.rej
patching file Makefile
Alles anzeigen
greetz MarMic
BIG THX für deine arbeit!
Daß so etwas auch immer passiert, wenn man keine Zeit hat! Hab's geflickt...
CU
Oliver
Hi,
erstmal vorab: Ich bin super happy, die Karte läuft wunderbar!! Vielen Dank!
Eine Frage hab ich noch zur Kür: Gibt es _irgendeine_ Möglichkeit Linux dazu zu bringen den Treiber früher zu laden? Der VDR rennt aktuell vor dem laden der Karte los, was zu folge hat das ich den neu starten muss. Als workaround hab ich jetzt ein "sleep 15" in das vdr upstart script geschrieben..
Grüße
Daß so etwas auch immer passiert, wenn man keine Zeit hat! Hab's geflickt...
CU
Oliver
VIELEN DANK
greetz MarMic
Eine Frage hab ich noch zur Kür: Gibt es _irgendeine_ Möglichkeit Linux dazu zu bringen den Treiber früher zu laden? Der VDR rennt aktuell vor dem laden der Karte los, was zu folge hat das ich den neu starten muss. Als workaround hab ich jetzt ein "sleep 15" in das vdr upstart script geschrieben..
Andersherum wird ein Schuh daraus. Bei yaVDR 0.4 starten wir den VDR sofort und das dynamite-Plugin schiebt dem VDR das DVB-Device unter sobald es sich bequemt mal fertig zu sein.
Gerald
@gdaDas funktioniert aber nur wenn das Ausgabe Device nicht selbst ein DVB-Device ist sondern ein Software Device, sonst beschwert sich der VDR das er kein Ausgabe device gefunden hat.Oder klappt das auch mit einer TT-S2-6400?
traxanos hat sich noch nicht beschwert.
Gerald
Hallo,
kann mir vielleicht jemand sagen ob die brandneue oben genannte Karte auch von den aktuellen Treibern unterstützt wird?
Vielen Dank.
Alles anzeigenHallo,
kann mir vielleicht jemand sagen ob die brandneue oben genannte Karte auch von den aktuellen Treibern unterstützt wird?
Vielen Dank.
Ja, wird unterstützt.
kann mir vielleicht jemand sagen ob die brandneue oben genannte Karte auch von den aktuellen Treibern unterstützt wird?
Wird noch nicht unterstützt, kommt aber als nächstes.
CU
Oliver
Wird noch nicht unterstützt, kommt aber als nächstes.
CU
Oliver
Wäre es dann besser zunächst die "alte" Variante zu kaufen, oder müssen im Sourcecode lediglich die neuen IDs hinzugefügt werden?
Hi
Sorry for intruding with english but my German isn´t up to the challenge.
I am not actually using VDR but have tried the driver (compiled as describe in the first post) with both mythbuntu (ubuntu 11.04) and tvheadend (ubuntu 11.04). The tuners are recognized, When i do a channels on DVB-C search using frequencies found on internet for my cable tv supplier (yousee denmark) I am unable to find any channels. I have tried media-portal under windows and here there are no problems. (I have been able to verify in mediaportal that the frequency and other setting are correct.
My basic setup is centos 6.0 and virtualizing the different host under kvm with PCI-passthrough (the VMs are running "alone"), so there isnt an issue with pass through.
Driver problems? seems to be the only common dominator.
Regards
Malthe
Wäre es dann besser zunächst die "alte" Variante zu kaufen, oder müssen im Sourcecode lediglich die neuen IDs hinzugefügt werden?
Was besser ist, mußt Du selbst entscheiden. Wenn es nur um IDs ginge, wäre der Support schon drin.
CU
Oliver
Hi
Sorry for intruding with english but my German isn´t up to the challenge.
I am not actually using VDR but have tried the driver (compiled as describe in the first post) with both mythbuntu (ubuntu 11.04) and tvheadend (ubuntu 11.04). The tuners are recognized, When i do a channels on DVB-C search using frequencies found on internet for my cable tv supplier (yousee denmark) I am unable to find any channels. I have tried media-portal under windows and here there are no problems. (I have been able to verify in mediaportal that the frequency and other setting are correct.
My basic setup is centos 6.0 and virtualizing the different host under kvm with PCI-passthrough (the VMs are running "alone"), so there isnt an issue with pass through.
Driver problems? seems to be the only common dominator.
If you use a recent checkout:
Unfortunately drxk support is broken in the current media_build.
Workaround:
make clean
cd linux
make distclean
Download http://linuxtv.org/downloads/drivers/linux-media-2011-07-02.tar.bz2
mv linux-media-2011-07-02.tar.bz2 linux-media.tar.bz2
cd ..
make untar
make
HTH
Oliver
If you use a recent checkout:
Unfortunately drxk support is broken in the current media_build.
does this mean that with current
http://linuxtv.org/hg/~endriss/media_build_experimental/
or
we can't make octopus+cards work?
Today, I've tried http://linuxtv.org/hg/~endriss/media_build_experimental/ as you described (twice on one machine, ones on other) with clean install Ubuntu 11.04 (kernel 2.6.38 ) and got this error
CC [M] /home/david/media_build_experimental/v4l/cx23885-cards.o
/home/david/media_build_experimental/v4l/cx23885-cards.c:29:50: fatal error: ../../../staging/altera-stapl/altera.h: No such file or directory
compilation terminated.
make[3]: *** [/home/david/media_build_experimental/v4l/cx23885-cards.o] Error 1
make[2]: *** [_module_/home/david/media_build_experimental/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic'
make[1]: *** [default] Error 2
make[1]: Leaving directory `/home/david/media_build_experimental/v4l'
make: *** [all] Error 2
When I try to install
I manage to get /dvb/adapterX for my tuners, but when trying to tune in some channel I get error by dmesg
saying
Please help, I'm stacked here whole day!
----------
David
Gleicher Abbruch heute Morgen beim Bauen unter 2.6.38-10 natty yavdr 0.4pre1 - das etwa 4 Wochen alte media_built lief danach einwandfrei durch
Christian
does this mean that with current
http://linuxtv.org/hg/~endriss/media_build_experimental/
or
we can't make octopus+cards work?
media_build is unusable atm.
For media_build_experimental you have to apply the workaround above. Afterwards the octopus will work.
CU
Oliver
For media_build_experimental you have to apply the workaround above. Afterwards the octopus will work.
Here is step-by-step what I have done:
1. Clean install of Ubuntu 11.04 with 2.6.28 kernel (again)
2. Check if my Octopus and DualFlex CT are connected with lspci and got
3. Downloaded http://linuxtv.org/downloads/drivers/linux-media-2011-07-02.tar.bz2
4.
sudo apt-get install mercurial
hg clone http://linuxtv.org/hg/~endriss/media_build_experimental
cd media_build_experimental
make download
cd linux
rm linux-media.tar.bz2*
mv /home/david/Downloads/linux-media-2011-07-02.tar.bz2 linux-media.tar.bz2
cd ..
make untar
make
make install
reboot
Alles anzeigen
I had no errors during this process.
5. After reboot I don't see any /dev/dvb or /dev/ddbridge
I don't know if I'm doing anything wrong, please help me!
----------
David
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!