Hallo Zusammen,
erst einmal viele Dank an alle in diesem super Forum. Ich bin vor ca. 8 Woche zu meinen VDR gekommen und habe in diesem Forum etliche gute Hilfestellungen bekommen.
Vielen Dank dafür. Smiley
Nun zur Sache - mein VDR setzt sich aus den folgenden Komponenten zusammen:
- Hauppauge Nova HD S2
- DVB-T Stick von Leadtek
- Athlon64 X2 6000+ G2
- 2 GB Dual Channel DDR2 - 800 MHz
- ASUS M3N78-VM HDMI
- 500 GB SATA Platte
- Slim Line DVD Brenner
- Atric Lirc Einschalter
Easy VDR Version 0.6.02 installiert
und das ganze im Silverstone LC02 Gehäuse.
Angeschlossen habe ich den VDR über ein HDMI Kabel an mein LG 32LC2R (32" LCD).
Alles in allem läuft das System sehr stabil. Es sind nur Kleinigkeiten an denen ich zur Zeit noch bastle.
zum Problem:
Die Auflösung der Desktops passt nicht ganz zur Darstellung meines LCDs. Ich bekomme zwar ein 720p Bild, aber mein LCD hat nativ 1366x768. Das führt dazu, dass die Ränder des Desktops oben, unten und an den Seiten abgeschnitten werden. Ich habe nun bereits mehrere Tage mit der Erstellung von Modelines verbracht - aber leider ohne Erfolg. Anbei meine teilweise auskommentierte x.org und das passende Logfile. In dieser Kombination komme ich zwar auf 720p aber mein Wunsch wäre es die native Auflösung meines LCDs auszunutzen.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Thu Jun 5 00:11:12 PDT 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jun 5 00:10:21 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from commandline input
Identifier "Keyboard0"
Driver "kbd"
Option "XkbLayout" "de"
Option "XkbModel" "pc105"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LG FTV"
HorizSync 15.0 - 50.0
VertRefresh 48.0 - 62.0
Option "DPMS"
# Modeline "1360x768@50" 67.86 1360 1392 1648 1680 768 784 791 807
EndSection
#Section "Device"
# Identifier "Device0"
# Driver "nvidia"
# VendorName "NVIDIA Corporation"
#EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8200"
EndSection
Section "Screen"
# Removed Option "metamodes" "1280x720_60 +0+0; 1280x720 +0+0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
# Option "UseEDID" "FALSE"
Option "metamodes" "1280x768_50 +0+0; 1280x720_50 +0+0; 1280x720_60 +0+0; 1280x720 +0+0"
SubSection "Display"
Depth 24
# Virtual 1360 768
# Modes "1360x768@50"
EndSubSection
EndSection
Auszug aus der VAR/ Log:
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x768_50 +0+0; 1280x720_50 +0+0; 1280x720_60 +0+0; 1280x720 +0+0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 8200 (C77) at PCI:2:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 62.77.19.00.00
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8200 at PCI:2:0:0:
(--) NVIDIA(0): LG 32LE2R-ZJ (DFP-0)
(--) NVIDIA(0): LG 32LE2R-ZJ (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): LG 32LE2R-ZJ (DFP-0): Internal Single Link TMDS
(WW) NVIDIA(0): The EDID for LG 32LE2R-ZJ (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "720x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (25.000-50.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "720x480".
(WW) NVIDIA(0): The EDID for LG 32LE2R-ZJ (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (25.000-50.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "720x576".
(WW) NVIDIA(0): The EDID for LG 32LE2R-ZJ (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "720x480" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (25.000-50.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "720x480".
(WW) NVIDIA(0): The EDID for LG 32LE2R-ZJ (DFP-0) contradicts itself: mode
(WW) NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's
(WW) NVIDIA(0): valid HorizSync range (25.000-50.000 kHz) would exclude
(WW) NVIDIA(0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check
(WW) NVIDIA(0): for mode "720x576".
(II) NVIDIA(0): Assigned Display Device: DFP-0
(WW) NVIDIA(0): No valid modes for "1280x768_50+0+0"; removing.
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x720_50+0+0"
(II) NVIDIA(0): "1280x720_60+0+0"
(II) NVIDIA(0): "1280x720+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 720
(++) NVIDIA(0): DPI set to (100, 100); computed from -dpi X commandline option
(==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
Ich habe mir bereits mehrere Modlines mit dem Modelinegenerator generiert - leider wird die Auflösung immer abgelehnt.
Zum LCD gibts es noch das Folgende zu sagen:
LG 32LC2R :
Auflösung 1366x768 47,7kHz horizontal - 59,8 Hz Bildwiederholfrequenz
Auflösung 1360x768 47,7kHz horizontal - 59,8 Hz Bildwiederholfrequenz
Auflösung 1280x768 47,8kHz horizontal - 59,9 Hz Bildwiederholfrequenz
Auflösung 1024x768 48,4kHz horizontal - 60 Hz Bildwiederholfrequenz
usw...
Ich hoffe Ihr könnt mir helfen die native Auflösung einzustellen.
Gruß
Kent