Hi all,
beim Test mit irw kommt nix und in VDR geht's auch nicht.
Wenn ich im Webfrontend LIRC abschalte geht mode2.
Bin für jede Hilfe dankbar, mir fäll nix mehr ein was ich testen könnte
An der remote.conf habe ich nichts geändert.
Anbei meine Configs:
hardware.conf
Code
#################################################################################
# #
# The following configuration file is generated automatically by the yaVDR #
# system. Don't change this file as every update of yaVDR will overwrite #
# the local changes. Instead put your required customizations #
# into /etc/yavdr/templates_custom/ based on the original templates #
# under /usr/share/yavdr/templates. #
# #
# http://www.yavdr.org/developer-zone/template-overview/ #
# #
# #
#################################################################################
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Home-brew (16x50 UART compatible serial port)"
REMOTE_MODULES="lirc_dev lirc_serial"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""
#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
#Enable lircd
START_LIRCD="true"
#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"
#Try to load appropriate kernel modules
LOAD_MODULES="true"
# Default configuration files for your hardware if any
LIRCMD_CONF=""
#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""
Alles anzeigen
lircd.conf
Code
# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.7(default) on Thu Oct 13 08:49:02 2011
#
# contributed by
#
# brand: /etc/lirc/lircd.conf
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name /etc/lirc/lircd.conf
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 908 871
zero 908 871
plead 915
gap 116035
min_repeat 2
suppress_repeat 2
# uncomment to suppress unwanted repeats
toggle_bit_mask 0x800
begin codes
KEY_UP 0x1006
KEY_DOWN 0x1007
KEY_MENU 0x100B
KEY_OK 0x100A
KEY_ESC 0x100C
KEY_LEFT 0x1008
KEY_RIGHT 0x1009
KEY_RED 0x1023
KEY_GREEN 0x1024
KEY_YELLOW 0x1025
KEY_BLUE 0x1026
KEY_0 0x1021
KEY_1 0x1017
KEY_2 0x1018
KEY_3 0x1019
KEY_4 0x101A
KEY_5 0x101B
KEY_6 0x101C
KEY_7 0x101D
KEY_8 0x101E
KEY_9 0x101F
KEY_INFO 0x100E
KEY_PLAY 0x1012
KEY_PAUSE 0x1016
KEY_STOP 0x100F
KEY_RECORD 0x1013
KEY_FASTFORWARD 0x1015
KEY_REWIND 0x1014
KEY_NEXT 0x1025
KEY_BACK 0x1024
KEY_POWER2 0x103E
KEY_CHANNELUP 0x1004
KEY_CHANNELDOWN 0x1003
KEY_PREVIOUS 0x1005
KEY_VOLUMEUP 0x1001
KEY_VOLUMEDOWN 0x1002
KEY_MUTE 0x1780
KEY_SUBTITLE 0x1020
KEY_EPG 0x100D
KEY_CHANNEL 0x1022
KEY_FAVORITES 0x1028
KEY_TIME 0x102C
KEY_PVR 0x102B
KEY_SETUP 0x102D
end codes
end remote
Alles anzeigen