[0.2] [gelöst] Atric IR, welche Einstellungen?

#################################################################################
#                                                                               #
#   The following configuration file is generated automatically by the yaVDR    #
#     system. Don't change this file as every update of yaVDR will overwrite    #
#         the local changes. Instead put your required customizations           #
#       into /etc/yavdr/templates_custom/ based on the original templates       #
#                      under /usr/share/yavdr/templates.                        #
#                                                                               #
#   http://www.vdr-wiki.de/wiki/index.php/YaVDR-FAQ#Templating.2FCustomizing    #   
#                                                                               #
#                                                                               #
#################################################################################
# /etc/lirc/hardware.conf
# 
#Chosen Remote Control
REMOTE="Home-brew (16x50 UART compatible serial port)"
REMOTE_MODULES="lirc_dev lirc_serial"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""


#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""


#Enable lircd
START_LIRCD="true"


#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"


#Try to load appropriate kernel modules
LOAD_MODULES="true"


# Default configuration files for your hardware if any
LIRCMD_CONF=""


#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""

vdr {
  frontend = xineliboutput
}
webfrontend {
  language = de
}
system {
  vdr {
    uid = 107
    gid = 107
  }
  hardware {
    nvidia {
      detected = 1
    }
    alsa {
      analog {
        card = 0
        device = 0
      }
      digital {
        card = 0
        device = 1
      }
      hdmi {
        card = 0
        device = 3
      }
    }
  }
  lirchw {
    serial_port = /dev/ttyS0
    description = Home-brew (16x50 UART compatible serial port)
    driver = serial
    lirc_driver = lirc_dev lirc_serial
    hw_default = hw_default
    lircd_conf = 
  }
  remoted = lircd
}

#################################################################################
#                                                                               #
#   The following configuration file is generated automatically by the yaVDR    #
#     system. Don't change this file as every update of yaVDR will overwrite    #
#         the local changes. Instead put your required customizations           #
#       into /etc/yavdr/templates_custom/ based on the original templates       #
#                      under /usr/share/yavdr/templates.                        #
#                                                                               #
#   http://www.vdr-wiki.de/wiki/index.php/YaVDR-FAQ#Templating.2FCustomizing    #   
#                                                                               #
#                                                                               #
#################################################################################
#COM1 equivalent, /dev/ttyS0
/dev/ttyS0 uart none
#COM2 equivalent, /dev/ttyS1
#/dev/ttyS1 uart none

#
# this config file was automatically generated
# using lirc-0.8.3(default) on Wed Jul  2 21:51:15 2008
#
# contributed by 
#
# brand:                                   Technotrend
# model no. of remote control: 
# devices being controlled by this remote: TV-Card
#


begin remote


  name       Technotrend
  bits                 6
  flags RC5|CONST_LENGTH
  eps                 30
  aeps                100


  one                 889   889
  zero                889   889
  plead               889
  pre_data_bits         7
  pre_data           0x55
  gap              113792
  toggle_bit            2
  frequency         36000
  duty_cycle           50


      begin codes
          Power                    0x01
          Mute                     0x18
          1                        0x03
          2                        0x04
          3                        0x05
          4                        0x06
          5                        0x07
          6                        0x08
          7                        0x09
          8                        0x0A
          9                        0x0B
          0                        0x0C
          Audio                    0x1A
          Repeat                   0x02
          vol-                     0x26
          vol+                     0x25
          Text                     0x19
          ch-                      0x24
          ch+                      0x23
          Exit                     0x13
          OK                       0x0F
          Up                       0x0D
          Down                     0x11
          Left                     0x0E
          Right                    0x10
          Red                      0x14
          Green                    0x15
          Yellow                   0x16
          Blue                     0x17
          Record                   0x3A
          Play                     0x3B
          Stop                     0x3C
          Info                     0x12
          Rew                      0x3D
          Pause                    0x3E
          Fwd                      0x3F
          EPG                      0x22
      end codes


end remote

root@vdr03:~# irrecord /etc/lircd.conf


irrecord -  application for recording IR-codes for usage with lirc


Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)


irrecord: could not get file information for /dev/lirc
irrecord: default_init(): No such file or directory
irrecord: could not init hardware (lircd running ? --> close it, check permissions)

root@vdr03:~# irrecord -d /dev/lirc0 /etc/lircd.conf


irrecord -  application for recording IR-codes for usage with lirc


Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)


irrecord: could not open /dev/lirc0
irrecord: default_init(): Device or resource busy
irrecord: could not init hardware (lircd running ? --> close it, check permissions)

root@vdr03:~# irrecord -d /dev/lirc0 /etc/lircd.conf


irrecord -  application for recording IR-codes for usage with lirc


Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)


This program will record the signals from your remote control
and create a config file for lircd.




A proper config file for lircd is maybe the most vital part of this
package, so you should invest some time to create a working config
file. Although I put a good deal of effort in this program it is often
not possible to automatically recognize all features of a remote
control. Often short-comings of the receiver hardware make it nearly
impossible. If you have problems to create a config file READ THE
DOCUMENTATION of this package, especially section "Adding new remote
controls" for how to get help.


If there already is a remote control of the same brand available at
http://www.lirc.org/remotes/ you might also want to try using such a
remote as a template. The config files already contain all
parameters of the protocol used by remotes of a certain brand and
knowing these parameters makes the job of this program much
easier. There are also template files for the most common protocols
available in the remotes/generic/ directory of the source
distribution of this package. You can use a template files by
providing the path of the file as command line parameter.


Please send the finished config files to <lirc@bartelmus.de> so that I
can make them available to others. Don't forget to put all information
that you can get about the remote control in the header of the file.


Press RETURN to continue.




Hold down an arbitrary button.
irrecord: gap not found, can't continue

root@vdr03:~# dmesg | grep lirc
[    8.639304] lirc_dev: IR Remote Control driver registered, major 61 
[    8.641433] lirc_imon: Driver for SoundGraph iMON MultiMedia IR/Display, v0.6
[    8.641460] lirc_dev: lirc_register_driver: sample_rate: 0
[    8.641565] lirc_imon: Registered iMON driver (lirc minor: 0)
[    8.663547] lirc_imon: iMON device (15c2:ffdc, intf0) on usb<3:3> initialized
[    8.663592] usbcore: registered new interface driver lirc_imon
[   11.240518] lirc_serial: auto-detected active high receiver
[   11.240523] lirc_dev: lirc_register_driver: sample_rate: 0
[   11.240608] lirc_serial $Revision: 5.104 $ registered
[   12.097521] lirc_imon: IR port opened

root@vdr03:~# dmesg | grep lirc
[   10.612878] lirc_dev: IR Remote Control driver registered, major 61 
[   10.614907] lirc_imon: Driver for SoundGraph iMON MultiMedia IR/Display, v0.6
[   10.614933] lirc_dev: lirc_register_driver: sample_rate: 0
[   10.614990] lirc_imon: Registered iMON driver (lirc minor: 0)
[   10.639546] lirc_imon: iMON device (15c2:ffdc, intf0) on usb<3:3> initialized
[   10.639590] usbcore: registered new interface driver lirc_imon
[   13.352035] lirc_serial: auto-detected active low receiver
[   13.352040] lirc_dev: lirc_register_driver: sample_rate: 0
[   13.352125] lirc_serial $Revision: 5.104 $ registered
[   18.137468] lirc_imon: IR port opened
[  482.929825] lirc_imon: IR port closed
[  485.919835] lirc_imon: IR port opened
[  922.683642] lirc_imon: IR port closed
[  928.480129] lirc_imon: IR port opened
[  992.045147] lirc_imon: IR port closed
[  997.465265] lirc_imon: IR port opened