Never ending story: dauernder Restart bei VDR4.5+TT+DXR3

hobu · 13. April 2006

Tja, auch die Suche hat mich leider nicht weitergebracht, daher versuch ich's mal in einem neuen Thread...

=====================
Softes
=====================
c't VDR: 1.3.46-1ctvdr1
Kernel : 2.6.12-ct-1

Patches:
--------------------------------------
liemikuutio-1.3
jumpplay-0.6
subtitles-ttxtsubs
submenu
disableDoubleEpgEntrys
noepg
wareagle-icons
rotor
yaepg
dvdarchive
sourcecaps
--------------------------------------
vdr-plugin-dxr3 (0.2.5-6)
--------------------------------------

An Software sind also nur die Basics drin...

=====================
Hartes
=====================
0000:00:11.0 Multimedia video controller: Yuan Yuan Enterprise Co., Ltd. MPG-200C PCI DVD Decoder Card
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at ea000000 (32-bit, non-prefetchable) [size=256]

0000:00:12.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget / Hauppauge WinTV-NOVA-T DVB card
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at ea001000 (32-bit, non-prefetchable) [size=512]
--------------------------------------

Problem:
Die DXR3 wird scheinbar nicht korrekt eingebunden.
"reconfigure" ist durchgelaufen und die Config-Dateien in /etc/modprobe.d/*, bzw. /etc/modutils/* sehen auch gut aus. Auch die Devices /dev/em8300* sind alle da.
Trotzdem will das Ding nicht laufen. Habe schon alle möglichen Paket rein und Paket raus-Spielchen hinter mir und bin nun mit meinem Latein am Ende...

Hier noch der Output aus dem syslog:

Code

Apr 13 14:38:14 localhost vdr: [16119] VDR version 1.3.46 started
Apr 13 14:38:14 localhost vdr: [16119] switched to user 'vdr'
Apr 13 14:38:14 localhost vdr: [16119] loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.46
Apr 13 14:38:14 localhost udev[16122]: creating device node '/dev/vcs8'
Apr 13 14:38:14 localhost udev[16123]: creating device node '/dev/vcsa8'
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/setup.conf
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrBackground = -2008809472
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrChannelDate = -2236963
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrChannelName = -2236963
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrConfirmLine = -870138932
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrEpgData = -2008809472
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrEpgTime = -1442840389
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrErrorLine = -870178100
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrHelpBlue = -859045888
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrHelpGreen = -870147806
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrHelpRed = -870178100
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrHelpYellow = -870138932
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrInfoLine = -1140858352
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrScrolLine = -1140858352
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: BgClrTitleLine = -1140858352
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ChannelLogo = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrChannelDate = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrChannelName = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrConfirmFont = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrEpgTime = 4
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrErrorFont = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrInfoFont = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrMenuFont = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrScrolLine = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrSubTitle = 4
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrSymbolOff = 8
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrSymbolOn = 4
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrTimeBar1 = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrTimeBar2 = 8
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrTitle = 7
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrTitleLine = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ClrVolumeBar = 3
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ConfirmSwitchTimers = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ConfirmSwitchTimersTimeout = 30
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: LiveMultichannelAudio = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: LogoColorScheme = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: MenuCommandPos = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: OSDxoffset = 0
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: PlayMultichannelAudio = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ProgressBar = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: ShowWeekdays = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: SmallFonts = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: SortTimers = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: Symbol = 1
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: Theme = 2
Apr 13 14:38:14 localhost vdr: [16119] ERROR: unknown config parameter: TimeBar = 1
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/sources.conf
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/diseqc.conf
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/channels.conf
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/commands.conf
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/reccmds.conf
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/svdrphosts.conf
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/remote.conf
Apr 13 14:38:14 localhost vdr: [16119] loading /var/lib/vdr/keymacros.conf
Apr 13 14:38:14 localhost vdr: [16119] reading EPG data from /var/cache/vdr/epg.data
Apr 13 14:38:14 localhost vdr: [16119] probing /dev/dvb/adapter0/frontend0
Apr 13 14:38:14 localhost vdr: [16135] video directory scanner thread started (pid=16135, tid=16135)
Apr 13 14:38:14 localhost vdr: [16135] video directory scanner thread ended (pid=16135, tid=16135)
Apr 13 14:38:14 localhost vdr: [16136] video directory scanner thread started (pid=16136, tid=16136)
Apr 13 14:38:14 localhost vdr: [16136] video directory scanner thread ended (pid=16136, tid=16136)
Apr 13 14:38:14 localhost kernel: tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
Apr 13 14:38:15 localhost kernel: tda1004x: firmware upload complete
Apr 13 14:38:16 localhost vdr: [16119] found 1 video device
Apr 13 14:38:16 localhost vdr: [16119] initializing plugin: dxr3 (0.2.5): Hardware MPEG decoder
Apr 13 14:38:16 localhost vdr: [16119] dxr3: unable to open /dev/em8300-0: No such file or directory
Apr 13 14:38:16 localhost vdr: [16119] dxr3: please verify that the em8300 modules are loaded
Apr 13 14:38:16 localhost runvdr: restarting VDR
Apr 13 14:38:16 localhost kernel: saa7146: unregister extension 'budget_ci dvb'.
Apr 13 14:38:16 localhost kernel: saa7146: unregister extension 'dvb'.
Apr 13 14:38:19 localhost kernel: saa7146: register extension 'budget_ci dvb'.
Apr 13 14:38:19 localhost kernel: PCI: Found IRQ 9 for device 0000:00:12.0
Apr 13 14:38:19 localhost kernel: saa7146: found saa7146 @ mem d0974000 (revision 1, irq 9) (0x13c2,0x1011).
Apr 13 14:38:19 localhost kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-T^I PCI).
Apr 13 14:38:20 localhost kernel: adapter has MAC addr = 00:d0:5c:22:2e:55
Apr 13 14:38:20 localhost kernel: DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
Apr 13 14:38:20 localhost input.agent[16211]:      evdev: already loaded
Apr 13 14:38:20 localhost kernel: saa7146: register extension 'dvb'.
Apr 13 14:38:26 localhost udev[16247]: removing device node '/dev/vcs8'
Apr 13 14:38:26 localhost udev[16248]: removing device node '/dev/vcsa8'
Apr 13 14:38:26 localhost udev[16249]: removing device node '/dev/dvb/adapter0/frontend0'
Apr 13 14:38:26 localhost udev[16250]: removing device node '/dev/dvb/adapter0/net0'
Apr 13 14:38:26 localhost udev[16251]: removing device node '/dev/dvb/adapter0/demux0'
Apr 13 14:38:26 localhost udev[16252]: removing device node '/dev/dvb/adapter0/dvr0'
Apr 13 14:38:27 localhost udev[16254]: removing device node '/dev/input/event1'
Apr 13 14:38:27 localhost udev[16355]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.dvr0' becomes '%c'
Apr 13 14:38:27 localhost udev[16355]: creating device node '/dev/dvb/adapter0/dvr0'
Apr 13 14:38:28 localhost udev[16331]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.net0' becomes '%c'
Apr 13 14:38:28 localhost udev[16331]: creating device node '/dev/dvb/adapter0/net0'
Apr 13 14:38:28 localhost udev[16369]: configured rule in '/etc/udev/rules.d/udev.rules[67]' applied, 'event1' becomes 'input/%k'
Apr 13 14:38:28 localhost udev[16369]: creating device node '/dev/input/event1'
Apr 13 14:38:28 localhost udev[16370]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.frontend0' becomes '%c'
Apr 13 14:38:28 localhost udev[16370]: creating device node '/dev/dvb/adapter0/frontend0'
Apr 13 14:38:28 localhost udev[16325]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.demux0' becomes '%c'
Apr 13 14:38:28 localhost udev[16325]: creating device node '/dev/dvb/adapter0/demux0'
Apr 13 14:38:29 localhost input.agent[16386]:      evdev: already loaded
Apr 13 14:38:35 localhost vdr: [16451] VDR version 1.3.46 started
...

Alles anzeigen

Und hier noch die (relevanten) Module:

Code

Module                  Size  Used by
em8300                 59396  0
adv717x                 5556  0
soundcore               9888  1 em8300
dvb_ttpci              90536  0
budget_ci              12288  0
budget_core             9252  1 budget_ci
dvb_core               80072  3 dvb_ttpci,budget_ci,budget_core
capability              4712  0
commoncap               6816  1 capability
evdev                   9152  0
tda1004x               13060  1 budget_ci
i2c_via                 4100  0
i2c_algo_bit            9448  2 em8300,i2c_via
pci_hotplug            28884  0
dm_mod                 56732  0
l64781                  7076  1 dvb_ttpci
saa7146_vv             46432  1 dvb_ttpci
video_buf              21348  1 saa7146_vv
saa7146                17704  4 dvb_ttpci,budget_ci,budget_core,saa7146_vv
v4l1_compat            13604  1 saa7146_vv
v4l2_common             5664  1 saa7146_vv
videodev                9632  1 saa7146_vv
ves1820                 5700  1 dvb_ttpci
stv0299                10728  2 dvb_ttpci,budget_ci
tda8083                 5764  1 dvb_ttpci
stv0297                 7840  1 dvb_ttpci
sp8870                  7212  1 dvb_ttpci
firmware_class          9856  3 dvb_ttpci,budget_ci,sp8870
crc32                   4160  4 dvb_ttpci,dvb_core,8139cp,8139too
ves1x93                 6468  1 dvb_ttpci
ttpci_eeprom            2560  2 dvb_ttpci,budget_core
i2c_core               21488  14 adv717x,dvb_ttpci,budget_ci,budget_core,tda1004x,i2c_algo_bit,l64781,ves1820,stv0299,tda8083,stv0297,sp8870,ves1x93,ttpci_eeprom

Alles anzeigen

Info:
Ich hatte vorher einen alten VDR3 mit der DVB-T-Karte und eine DVB-C-Karte.
Funktionierte relativ klaglos. Aber die DXR3 bringt mir noch mehr graue Haare...

Wer hat noch 'ne Idee, wo's hier klemmt?

Danke im Voraus!

gruenenegger · 13. April 2006

evtl. hift ein update auf kernel 2.6.15

mfg
grüni

hobu · 13. April 2006

Wär' 'ne Idee...
Aber wie bekomme ich den neuen Kernel?
Ein "apt-get upgrade" bietet mir da nix neueres an.

Hier meine sources.list:

Code

# Basis-Debian
deb http://ftp2.de.debian.org/debian sarge main non-free contrib
deb http://security.debian.org/ sarge/updates main contrib non-free
deb ftp://ftp.nerim.net/debian-marillat sarge main


# VDR von Tobi
deb http://e-tobi.net/vdr-experimental sarge base backports addons vdr-multipatch


# VDR himself...
deb http://www.heise.de/ct/ftp/projekte/vdr45 updates/

Alles anzeigen

Kleineres Problem nebenbei:
Bei der Installation vom o.a. VDR ist mir auch dei Courier-Mailserver mit auf die Platte gekommen. De-Installieren per "apt-get remove" geht nicht, weil er dann auch den VDR wieder de-installieren will. Wie werde ich das Ding wieder los?

@c't: No offense, aber ich würde gerne *selber* entscheiden, welchen Mail-Server ich verwende. Eine Paket-Abhängigkeit vom VDR zum Courier zu schaffen ist nicht so prall...

hste · 13. April 2006

Zitat

Original von hobu
Aber wie bekomme ich den neuen Kernel?
Ein "apt-get upgrade" bietet mir da nix neueres an.

Via apt-get install kernel-image-2.6.15-ct-1

Mit dem 2.6.15er Kernel brauchst du ggf. weitere neuere Pakete, Erläuterungen dazu findest du da:
http://www.heise.de/ct/ftp/projekte/vdr/news/12012006.shtml

.

hobu · 13. April 2006

OK. Kernel 2.6.15 ist drauf. Problem besteht weiterhin.

Hier nochmal der Output im syslog:

Code

Apr 13 21:40:47 localhost runvdr: restarting VDR
Apr 13 21:40:47 localhost kernel: saa7146: unregister extension 'budget_ci dvb'.
Apr 13 21:40:47 localhost kernel: saa7146: unregister extension 'dvb'.
Apr 13 21:40:49 localhost kernel: saa7146: register extension 'budget_ci dvb'.
Apr 13 21:40:49 localhost kernel: PCI: Found IRQ 9 for device 0000:00:12.0
Apr 13 21:40:49 localhost kernel: saa7146: found saa7146 @ mem d0940000 (revision 1, irq 9) (0x13c2,0x1011).
Apr 13 21:40:49 localhost kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-T^I PCI).
Apr 13 21:40:49 localhost kernel: adapter has MAC addr = 00:d0:5c:22:2e:55
Apr 13 21:40:49 localhost kernel: input: Budget-CI dvb ir receiver saa7146 (0) as /class/input/input22
Apr 13 21:40:49 localhost kernel: DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
Apr 13 21:40:49 localhost kernel: saa7146: register extension 'dvb'.
Apr 13 21:40:57 localhost udev[9532]: removing device node '/dev/vcs8'
Apr 13 21:40:57 localhost udev[9535]: removing device node '/dev/dvb/adapter0/net0'
Apr 13 21:40:58 localhost udev[9536]: removing device node '/dev/dvb/adapter0/demux0'
Apr 13 21:40:58 localhost udev[9537]: removing device node '/dev/dvb/adapter0/dvr0'
Apr 13 21:40:58 localhost udev[9534]: removing device node '/dev/dvb/adapter0/frontend0'
Apr 13 21:40:58 localhost udev[9533]: removing device node '/dev/vcsa8'
Apr 13 21:40:59 localhost udev[9631]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.demux0' becomes '%c'
Apr 13 21:40:59 localhost udev[9631]: creating device node /dev/dvb/adapter0/demux0'
Apr 13 21:40:59 localhost udev[9640]: configured rule in /etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.net0' becomes '%c'
Apr 13 21:40:59 localhost udev[9640]: creating device node '/dev/dvb/adapter0/net0'
Apr 13 21:40:59 localhost udev[9679]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.dvr0' becomes '%c'
Apr 13 21:40:59 localhost udev[9653]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.frontend0' becomes '%c'
Apr 13 21:40:59 localhost udev[9653]: creating device node '/dev/dvb/adapter0/frontend0'
Apr 13 21:40:59 localhost udev[9679]: creating device node '/dev/dvb/adapter0/dvr0'
Apr 13 21:41:05 localhost vdr: [9724] VDR version 1.3.46 started
Apr 13 21:41:05 localhost vdr: [9724] switched to user 'vdr'
Apr 13 21:41:05 localhost vdr: [9724] loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.46
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/setup.conf
Apr 13 21:41:05 localhost vdr: [9724] ERROR: unknown config parameter: BgClrBackground = -2008809472
...
Apr 13 21:41:05 localhost vdr: [9724] ERROR: unknown config parameter: TimeBar = 1
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/sources.conf
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/diseqc.conf
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/channels.conf
Apr 13 21:41:05 localhost udev[9727]: creating device node '/dev/vcs8'
Apr 13 21:41:05 localhost udev[9728]: creating device node '/dev/vcsa8'
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/commands.conf
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/reccmds.conf
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/svdrphosts.conf
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/remote.conf
Apr 13 21:41:05 localhost vdr: [9724] loading /var/lib/vdr/keymacros.conf
Apr 13 21:41:05 localhost vdr: [9724] reading EPG data from /var/cache/vdr/epg.data
Apr 13 21:41:05 localhost vdr: [9724] probing /dev/dvb/adapter0/frontend0
Apr 13 21:41:05 localhost vdr: [9736] video directory scanner thread started (pid=9736, tid=9736)
Apr 13 21:41:05 localhost vdr: [9736] video directory scanner thread ended (pid=9736, tid=9736)
Apr 13 21:41:05 localhost vdr: [9737] video directory scanner thread started (pid=9737, tid=9737)
Apr 13 21:41:05 localhost vdr: [9737] video directory scanner thread ended (pid=9737, tid=9737)
Apr 13 21:41:05 localhost kernel: tda1004x: found firmware revision 0 -- invalid
Apr 13 21:41:05 localhost kernel: tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
Apr 13 21:41:07 localhost kernel: tda1004x: firmware upload complete
Apr 13 21:41:07 localhost kernel: tda1004x: found firmware revision 2c -- ok
Apr 13 21:41:07 localhost vdr: [9724] found 1 video device
Apr 13 21:41:07 localhost vdr: [9724] initializing plugin: dxr3 (0.2.5): Hardware MPEG decoder
Apr 13 21:41:07 localhost vdr: [9764] tuner on device 1 thread started (pid=9764, tid=9764)
Apr 13 21:41:07 localhost vdr: [9765] section handler thread started (pid=9765, tid=9765)
Apr 13 21:41:07 localhost modprobe: FATAL: Error running install command for em8300
Apr 13 21:41:07 localhost vdr: [9724] dxr3: unable to open /dev/em8300-0: Kein passendes Gerät bzw. keine passende Adresse gefunden
Apr 13 21:41:07 localhost vdr: [9724] dxr3: please verify that the em8300 modules are loaded
Apr 13 21:41:08 localhost runvdr: restarting VDR

Alles anzeigen

Interessant: Jetzt eine andere Fehlermeldung beim Device vom DXR3.

Code

argus:~# ls -l /dev/em8300-0
crw-rw----  1 vdr video 121, 0 2006-04-13 21:39 /dev/em8300-0

Passt doch, oder?

Hier nochmal die DXR3 selbst:

Code

argus:~# lspci
...
0000:00:11.0 Multimedia video controller: Yuan Yuan Enterprise Co., Ltd. MPG-200C PCI DVD Decoder Card

Andere Vorschläge?

Wicky · 23. April 2006

Sehr wahrscheinlich sind die em8300 devices nicht richtig angelegt. (Sagen wir mal ich bin mir 99% sicher) Wenn du überprüfen möchtest, ob es die Ursache ist, dann schau dir mal dxr3config an.

Wenn du wissen möchtest, wie man die devices anlegt, dann schau mal hier vorbei:
http://dxr3.sourceforge.net/howto.html#createdev

Gruß
Wicky

easyTommes · 28. April 2006

Hallo Leute,

habe die c't-vdr 4.5 mit Kernel 2.6.15 installiert, aber hier
sind auch die dauernden Restarts.

Dann laut wilderigel ein:

Code

modprobe capability
Besser gleich in /etc/modules eintragen.

Fehlermeldung im Log

Code

Apr 28 02:43:53 vdr3 vdr: [11624] dxr3: unable to open /dev/em8300-0: Keine Berechtigung
Apr 28 02:43:53 vdr3 vdr: [11624] dxr3: please verify that the em8300 modules are loaded

Abhilfe schaffte dann vorerst:

Code

chmod -R 777 /dev/em8300-0
chmod -R 777 /dev/em8300_ma-0
chmod -R 777 /dev/em8300_mv-0
chmod -R 777 /dev/em8300_sp-0

Dann wollte ich die Module-Parameter einstellen, danach ein Start des VDR,
da kam wieder o.g. Fehlermeldung von wegen Kein Berechtigung

Hat jemand ne (oder 2) Idee(n) ?

Gruß, Aman

Wicky · 28. April 2006

Ja, leg die devices, wie im obigen Link beschrieben, neu an.
Falls es dann noch Probleme mit den devices gibt, dann steckt der Fehler noch wo anders und die Meldung ist nur ein Folgefehler. An der Stelle kann man dann natürlich noch weiter suchen. Eine Neuinstallation könnte man aber auch in Erwähgung ziehen.

Mach auch mal fogendes (bei geladenen Modulen für die dxr3)

cat /proc/em8300/0

Das solte Informationen über deine dxr3 ausgeben. Und wie sieht es jetzt eigentlich mit der Vendor ID aus?

Gruß
WIcky

Never ending story: dauernder Restart bei VDR4.5+TT+DXR3

Jetzt mitmachen!

Teilen

Benutzer online in diesem Thema