Hi LCD Fans,
stehe ein bischen ratlos vor dem meinem Linux4Media Display, das ich an meinem TestVDR ausprobieren möchte.
Das Display funktioniert, ich kann es sowohl als "root", als auch als User "vdr" mit dem Tool "testserdisp" ansprechen und alle Tests durchführen.
Wenn ich nun versuche mit den graphlcd-tools zu testen:
Code
/usr/bin/showtext -d serdisp -f fnt:/usr/share/vdr-plugin-graphlcd/fonts/f17b.fnt -e utf-8 "Hugo" "Boss"
Zeigt das Display nichts an, bleibt grau. Unnötig zu erwähnen das vdr-plugin-graphlcd ebenso nix anzeigt, egal welche Version 0.1.5 oder 0.1.6.
Der relevante Teil in der /etc/graphlcd.conf sieht so aus:
Code
[serdisp]
Driver=serdisp
Device=HID:/dev/usb/hiddev0
# Controller
# Select the serdisplib name of your display.
# Possible values: See README in serdisplib package or http://serdisplib.source
forge.net
#Controller=nokia7110
#Controller=sed1335
#Controller=optrex323
Controller=l4m132c
# Options
# Pass display specific options
# Possible values: See driver-specific hardware page at http://serdisplib.sourceforge.net
#
# IMPORTANT: when using generic controllers like sed1330,sed1335,t6963c, width and height
# need to be set here (if different from default settings)!
# (serdisplib needs to be extended to be able to use 'Width' and 'Height'
# settings directly - this will be added later)
#
#Options=MODE=8080
#Options=DELAY=2000;FONTWIDTH=8;CHECK=1
#Options=WIDTH=128;HEIGHT=64
#Options=WIDTH=128;HEIGHT=64;DELAY=2000;FONTWIDTH=8;CHECK=1
Options=bgcolour=0xffffff;fgcolour=0x000000;RESMODE=1;DEPTH=1;POSTOFFMODE=1;INVERT=no;ROTATE=0
# Wiring
# Select Wiring
# Possible values: See driver-specific hardware page at http://serdisplib.sourceforge.net
#Wiring=1
#Wiring=PowerLCD
#Wiring=DATA8,CS:nAUTO,A0:INIT,WR:nSTRB,RD:nSELIN
# FGColour
# Drawing colour for non-monochrome displays
# Possible values: 0xRRGGBB (eg.: 0xFF0000)
# Defaults to black (0x000000) if not set
#FGColour=0x000000
# BGColour
# Background colour for non-monochrome displays
# Possible values: 0xRRGGBB (eg.: 0x00FFFF)
# Defaults to white (0xFFFFFF) if not set
#BGColour=0xFFFFFF
#Port=0x378
#Device=/dev/parport0
#UpsideDown=no
#Invert=no
Contrast=10
Backlight=yes
# Settings 'Width' and 'Height' are ignored at the moment. For generic controllers # (sed1330/1335, 6963) width and height need to be set using setting 'Options' (look above)
##Width=240
##Height=128
Alles anzeigen
Code
vdr2-vdr:/home/vdr> ll /dev/usb/hiddev0
crw-rw---- 1 root vdr 180, 96 2010-05-15 19:30 /dev/usb/hiddev0
Hat jemand einen Tip wo ich weitersuchen könnte?
Vielen Dank schon mal.
Gruß
Frank