Tevii S470 wird nicht erkannt - Welches DVB-Subsystem nutzen?

stillgelegt4 · 13. Juli 2010

Hallo,

nachdem mein Experimentier-System (endlich) das erste 1080p-Video vom NFS-Server abgespielt hat (leider noch ohne Ton), wollte ich mich der DVB-S2 Karte widmen:

Einer Tevii S470.

Ich habe yaVDR 0.2 installiert und alle Installationsoptionen auf Standard belassen. Nachträglich habe ich nur folgendes erledigt:

1. Skript von linuxtv.org ausgeführt:
http://www.linuxtv.org/wiki/in…/TeVii_S470#Older_kernels
2.

Code

apt-get install s2-liplianin-dkms

ausgeführt und danach
3. Die Datei http://tevii.com/tevii_ds3000.tar.gz geladen und
4. Im Unterverzeichnis "linux-s2api-ds3000" des Archivs nach INSTALL ein

Code

make install

ausgeführt + Rechner reboot

Nach wie vor liefert ein

Code

w_scan -c DE

nichts. Hier die erzeugte Fehlermeldung:

Code

w_scan version 20091230 (compiled for DVB API 5.1)
using settings for 19.2 east Astra 1F/1G/1H/1KR/1L
frontend_type DVB-S, channellist 6
output format vdr-1.7
Info: using DVB adapter auto detection.
main:2911: FATAL: ***** NO USEABLE DVB CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.

Sichergestellt, dass vdr nicht läuft mittels

Code

stop vdr

habe ich. Hier die üblichen Systeminformationen. Sollte etwas fehlen, einfach fragen

Ich vermute, da ist ein Framework zuviel zugange, kenne mich aber nicht gut genug aus um zu sagen, welches über ist und wie weiter vorzugehen ist. Würde mich über einen kurzen Schubser in die richtige Richtung freuen.

yaVDR und VDR Wiki/FAQ hilft mir leider nicht weiter.

lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
03:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)

lsmod
Module Size Used by
autofs4 22715 2
ds3000 13518 1
nfsd 238967 13
exportfs 3437 1 nfsd
cx23885 117352 0
nfs 264813 0
lockd 64849 2 nfsd,nfs
nfs_acl 2245 2 nfsd,nfs
auth_rpcgss 33735 2 nfsd,nfs
cx2341x 12404 1 cx23885
v4l2_common 16326 2 cx23885,cx2341x
videodev 36281 2 cx23885,v4l2_common
v4l1_compat 13251 1 videodev
videobuf_dma_sg 10750 1 cx23885
videobuf_dvb 5096 1 cx23885
dvb_core 86042 2 cx23885,videobuf_dvb
videobuf_core 16174 3 cx23885,videobuf_dma_sg,videobuf_dvb
ir_common 46300 1 cx23885
snd_hda_codec_realtek 203310 1
btcx_risc 3624 1 cx23885
snd_hda_intel 21941 0
snd_hda_codec 74201 2 snd_hda_codec_realtek,snd_hda_intel
tveeprom 11038 1 cx23885
snd_hwdep 5412 1 snd_hda_codec
sunrpc 193085 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ir_core 6142 2 cx23885,ir_common
snd_pcm 70662 2 snd_hda_intel,snd_hda_codec
snd_timer 19098 1 snd_pcm
snd 54148 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
intel_agp 24119 0
lp 7028 0
parport 32635 1 lp
nvidia 9961216 28
agpgart 31724 2 intel_agp,nvidia
r8169 34076 0
mii 4381 1 r8169

dmeg

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-23-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 (Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcffb0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cffb0000 (usable)
[ 0.000000] modified: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[ 0.000000] modified: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[ 0.000000] modified: 00000000cfff0000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37897000 - 37fefc25
[ 0.000000] Allocated new RAMDISK: 008e0000 - 01038c25
[ 0.000000] Move RAMDISK from 0000000037897000 - 0000000037fefc24 to 008e0000 - 01038c24
[ 0.000000] ACPI: RSDP 000f91b0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT cffb0000 00038 (v01 A_M_I OEMRSDT 05000702 MSFT 00000097)
[ 0.000000] ACPI: FACP cffb0200 00084 (v02 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT cffb0440 04B0B (v01 ASR18 ASR18032 00000032 INTL 02002026)
[ 0.000000] ACPI: FACS cffc0000 00040
[ 0.000000] ACPI: APIC cffb0390 0006C (v01 A_M_I OEMAPIC 05000702 MSFT 00000097)
[ 0.000000] ACPI: MCFG cffb0400 0003C (v01 A_M_I OEMMCFG 05000702 MSFT 00000097)
[ 0.000000] ACPI: OEMB cffc0040 00046 (v01 A_M_I AMI_OEM 05000702 MSFT 00000097)
[ 0.000000] ACPI: HPET cffb4f50 00038 (v01 A_M_I OEMHPET 05000702 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2439MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008dc000 - 00008df12f] BRK ==> [00008dc000 - 00008df12f]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e0000 - 0001038c25] NEW RAMDISK ==> [00008e0000 - 0001038c25]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000cffb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cffb0
[ 0.000000] On node 0 totalpages: 851775
[ 0.000000] free_area_init_node: node 0, pgdat c0798760, node_mem_map c103a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4880 pages used for memmap
[ 0.000000] HighMem zone: 619682 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ed00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u1048576
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 845119
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-23-generic root=UUID=b99e4977-d249-46a8-9cac-07b0d5d50392 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 17037440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000cffb0)
[ 0.000000] Memory: 3346032k/3407552k available (4676k kernel code, 59960k reserved, 2118k data, 660k init, 2498248k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB)
[ 0.000000] .data : 0xc0591293 - 0xc07a2e88 (2118 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0591293 (4676 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1794.945 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3589.89 BogoMIPS (lpj=7179780)
[ 0.004026] Security Framework initialized
[ 0.004049] AppArmor: AppArmor initialized
[ 0.004057] Mount-cache hash table entries: 512
[ 0.004211] Initializing cgroup subsys ns
[ 0.004216] Initializing cgroup subsys cpuacct
[ 0.004221] Initializing cgroup subsys memory
[ 0.004229] Initializing cgroup subsys devices
[ 0.004232] Initializing cgroup subsys freezer
[ 0.004234] Initializing cgroup subsys net_cls
[ 0.004259] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004262] CPU: L2 cache: 1024K
[ 0.004265] CPU: Physical Processor ID: 0
[ 0.004267] CPU: Processor Core ID: 0
[ 0.004272] mce: CPU supports 6 MCE banks
[ 0.004282] CPU0: Thermal monitoring enabled (TM2)
[ 0.004286] using mwait in idle threads.
[ 0.004293] Performance Events: Core2 events, Intel PMU driver.
[ 0.004304] ... version: 2
[ 0.004306] ... bit width: 40
[ 0.004308] ... generic registers: 2
[ 0.004310] ... value mask: 000000ffffffffff
[ 0.004313] ... max period: 000000007fffffff
[ 0.004315] ... fixed-purpose events: 3
[ 0.004317] ... event mask: 0000000700000003
[ 0.004321] Checking 'hlt' instruction... OK.
[ 0.023123] ACPI: Core revision 20090903
[ 0.032011] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.032017] ftrace: allocating 21776 entries in 43 pages
[ 0.036068] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.077727] CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0b
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164082] CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0b
[ 0.164095] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168022] Brought up 2 CPUs
[ 0.168026] Total of 2 processors activated (7179.92 BogoMIPS).
[ 0.168430] CPU0 attaching sched-domain:
[ 0.168434] domain 0: span 0-1 level MC
[ 0.168436] groups: 0 1
[ 0.168444] CPU1 attaching sched-domain:
[ 0.168446] domain 0: span 0-1 level MC
[ 0.168449] groups: 1 0
[ 0.168565] devtmpfs: initialized
[ 0.168565] regulator: core version 0.5
[ 0.168565] Time: 19:31:14 Date: 07/13/10
[ 0.168565] NET: Registered protocol family 16
[ 0.168565] Trying to unpack rootfs image as initramfs...
[ 0.168565] EISA bus registered
[ 0.168565] ACPI: bus type pci registered
[ 0.168565] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
[ 0.168565] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.168565] PCI: Not using MMCONFIG.
[ 0.168565] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[ 0.168565] PCI: Using configuration type 1 for base access
[ 0.172140] bio: create slab <bio-0> at 0
[ 0.173002] ACPI: EC: Look up EC in DSDT
[ 0.175845] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.181178] ACPI: Interpreter enabled
[ 0.181200] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.181231] ACPI: Using IOAPIC for interrupt routing
[ 0.189183] ACPI Warning: Incorrect checksum in table [OEMB] - E5, should be E4 (20090903/tbutils-314)
[ 0.189320] ACPI: No dock devices found.
[ 0.189634] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.189776] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.189780] pci 0000:00:01.0: PME# disabled
[ 0.189852] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9cfc000-0xf9cfffff]
[ 0.189901] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.189905] pci 0000:00:1b.0: PME# disabled
[ 0.189975] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.189979] pci 0000:00:1c.0: PME# disabled
[ 0.190051] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.190056] pci 0000:00:1c.1: PME# disabled
[ 0.190113] pci 0000:00:1d.0: reg 20 io port: [0xc480-0xc49f]
[ 0.190168] pci 0000:00:1d.1: reg 20 io port: [0xc800-0xc81f]
[ 0.190223] pci 0000:00:1d.2: reg 20 io port: [0xc880-0xc89f]
[ 0.190277] pci 0000:00:1d.3: reg 20 io port: [0xcc00-0xcc1f]
[ 0.190337] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9cfbc00-0xf9cfbfff]
[ 0.190394] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.190399] pci 0000:00:1d.7: PME# disabled
[ 0.190539] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.190544] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.190548] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
[ 0.190596] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.190604] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.190611] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.190619] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.190627] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.190675] pci 0000:00:1f.2: reg 10 io port: [0xc400-0xc407]
[ 0.190682] pci 0000:00:1f.2: reg 14 io port: [0xc080-0xc083]
[ 0.190689] pci 0000:00:1f.2: reg 18 io port: [0xc000-0xc007]
[ 0.190696] pci 0000:00:1f.2: reg 1c io port: [0xbc00-0xbc03]
[ 0.190703] pci 0000:00:1f.2: reg 20 io port: [0xb880-0xb88f]
[ 0.190730] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.190735] pci 0000:00:1f.2: PME# disabled
[ 0.190785] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.190845] pci 0000:03:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.190857] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.190869] pci 0000:03:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.190876] pci 0000:03:00.0: reg 24 io port: [0xec00-0xec7f]
[ 0.190882] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebfffff]
[ 0.190952] pci 0000:00:01.0: bridge io port: [0xe000-0xefff]
[ 0.190956] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfebfffff]
[ 0.190961] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.191013] pci 0000:02:00.0: reg 10 64bit mmio: [0xf9e00000-0xf9ffffff]
[ 0.191100] pci 0000:02:00.0: supports D1 D2
[ 0.191103] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.191109] pci 0000:02:00.0: PME# disabled
[ 0.191166] pci 0000:00:1c.0: bridge 32bit mmio: [0xf9e00000-0xf9ffffff]
[ 0.191234] pci 0000:01:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.191258] pci 0000:01:00.0: reg 18 64bit mmio: [0xf9dff000-0xf9dfffff]
[ 0.191283] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf9dc0000-0xf9ddffff]
[ 0.191335] pci 0000:01:00.0: supports D1 D2
[ 0.191338] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.191344] pci 0000:01:00.0: PME# disabled
[ 0.191393] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.191398] pci 0000:00:1c.1: bridge 32bit mmio: [0xf9d00000-0xf9dfffff]
[ 0.191457] pci 0000:00:1e.0: transparent bridge
[ 0.191486] pci_bus 0000:00: on NUMA node 0
[ 0.191492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.191654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.191721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.191838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.191903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.201833] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.201955] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.202072] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.202189] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.202306] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.202423] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.202541] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.202659] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.202811] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.202816] vgaarb: loaded
[ 0.202965] SCSI subsystem initialized
[ 0.203079] libata version 3.00 loaded.
[ 0.203164] usbcore: registered new interface driver usbfs
[ 0.203186] usbcore: registered new interface driver hub
[ 0.203217] usbcore: registered new device driver usb
[ 0.203377] ACPI: WMI: Mapper loaded
[ 0.203380] PCI: Using ACPI for IRQ routing
[ 0.203567] NetLabel: Initializing
[ 0.203569] NetLabel: domain hash size = 128
[ 0.203571] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.203586] NetLabel: unlabeled traffic allowed by default
[ 0.203634] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.203640] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.208077] Switching to clocksource tsc
[ 0.210517] AppArmor: AppArmor Filesystem Enabled
[ 0.210540] pnp: PnP ACPI init
[ 0.210564] ACPI: bus type pnp registered
[ 0.214476] pnp: PnP ACPI: found 16 devices
[ 0.214481] ACPI: ACPI bus type pnp unregistered
[ 0.214486] PnPBIOS: Disabled by ACPI PNP
[ 0.214502] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.214513] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.214517] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.214521] system 00:06: ioport range 0x480-0x4bf has been reserved
[ 0.214524] system 00:06: ioport range 0x900-0x90f has been reserved
[ 0.214527] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.214531] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.214539] system 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.214546] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.214550] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.214560] system 00:0d: ioport range 0x290-0x29f has been reserved
[ 0.214567] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.214574] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.214577] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 0.214581] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.214584] system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.249369] pci 0000:00:01.0: PCI bridge, secondary bus 0000:03
[ 0.249374] pci 0000:00:01.0: IO window: 0xe000-0xefff
[ 0.249379] pci 0000:00:01.0: MEM window: 0xfa000000-0xfebfffff
[ 0.249383] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.249389] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.249393] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.249399] pci 0000:00:1c.0: MEM window: 0xf9e00000-0xf9ffffff
[ 0.249403] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.249411] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01
[ 0.249414] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.249420] pci 0000:00:1c.1: MEM window: 0xf9d00000-0xf9dfffff
[ 0.249425] pci 0000:00:1c.1: PREFETCH window: 0x000000f0200000-0x000000f03fffff
[ 0.249432] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.249434] pci 0000:00:1e.0: IO window: disabled
[ 0.249440] pci 0000:00:1e.0: MEM window: disabled
[ 0.249444] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.249466] alloc irq_desc for 16 on node -1
[ 0.249469] alloc kstat_irqs on node -1
[ 0.249479] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249485] pci 0000:00:01.0: setting latency timer to 64
[ 0.249494] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.249499] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.249504] pci 0000:00:1c.0: setting latency timer to 64
[ 0.249514] alloc irq_desc for 17 on node -1
[ 0.249516] alloc kstat_irqs on node -1
[ 0.249520] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.249525] pci 0000:00:1c.1: setting latency timer to 64
[ 0.249534] pci 0000:00:1e.0: setting latency timer to 64
[ 0.249540] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.249543] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.249546] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.249549] pci_bus 0000:03: resource 1 mem: [0xfa000000-0xfebfffff]
[ 0.249552] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.249555] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.249558] pci_bus 0000:02: resource 1 mem: [0xf9e00000-0xf9ffffff]
[ 0.249561] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.249564] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.249567] pci_bus 0000:01: resource 1 mem: [0xf9d00000-0xf9dfffff]
[ 0.249570] pci_bus 0000:01: resource 2 pref mem [0xf0200000-0xf03fffff]
[ 0.249573] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.249576] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.249625] NET: Registered protocol family 2
[ 0.249762] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.250152] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.250751] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.251238] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.251241] TCP reno registered
[ 0.251423] NET: Registered protocol family 1
[ 0.251567] pci 0000:03:00.0: Boot video device
[ 0.251805] cpufreq-nforce2: No nForce2 chipset.
[ 0.251844] Scanning for low memory corruption every 60 seconds
[ 0.251978] audit: initializing netlink socket (disabled)
[ 0.251992] type=2000 audit(1279049474.251:1): initialized
[ 0.263299] highmem bounce pool size: 64 pages
[ 0.263306] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.265127] VFS: Disk quotas dquot_6.5.2
[ 0.265208] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.265907] fuse init (API version 7.13)
[ 0.266010] msgmni has been set to 1657
[ 0.266296] alg: No test for stdrng (krng)
[ 0.266373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.266378] io scheduler noop registered
[ 0.266380] io scheduler anticipatory registered
[ 0.266382] io scheduler deadline registered
[ 0.266430] io scheduler cfq registered (default)
[ 0.266588] alloc irq_desc for 24 on node -1
[ 0.266591] alloc kstat_irqs on node -1
[ 0.266601] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.266609] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.266706] alloc irq_desc for 25 on node -1
[ 0.266708] alloc kstat_irqs on node -1
[ 0.266716] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.266725] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.266842] alloc irq_desc for 26 on node -1
[ 0.266844] alloc kstat_irqs on node -1
[ 0.266851] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.266860] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.266947] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.266967] Firmware did not grant requested _OSC control
[ 0.266986] Firmware did not grant requested _OSC control
[ 0.267017] Firmware did not grant requested _OSC control
[ 0.267031] Firmware did not grant requested _OSC control
[ 0.267046] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.267166] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.267171] ACPI: Power Button [PWRB]
[ 0.267223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.267226] ACPI: Power Button [PWRF]
[ 0.267907] ACPI: SSDT cffc0090 001D2 (v01 AMI CPU1PM 00000001 INTL 20051117)
[ 0.268203] processor LNXCPU:00: registered as cooling_device0
[ 0.268551] ACPI: SSDT cffc0270 00143 (v01 AMI CPU2PM 00000001 INTL 20051117)
[ 0.268825] processor LNXCPU:01: registered as cooling_device1
[ 0.273795] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.273901] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.274420] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.275692] brd: module loaded
[ 0.276253] loop: module loaded
[ 0.276367] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.276500] ata_piix 0000:00:1f.1: version 2.13
[ 0.276522] alloc irq_desc for 18 on node -1
[ 0.276524] alloc kstat_irqs on node -1
[ 0.276533] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.276578] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.276686] scsi0 : ata_piix
[ 0.276782] scsi1 : ata_piix
[ 0.278301] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.278306] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.278344] alloc irq_desc for 19 on node -1
[ 0.278347] alloc kstat_irqs on node -1
[ 0.278354] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.278359] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.278402] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.278433] isapnp: Scanning for PnP cards...
[ 0.278638] ata2: port disabled. ignoring.
[ 0.278659] scsi2 : ata_piix
[ 0.278725] scsi3 : ata_piix
[ 0.278766] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.278769] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.279161] Fixed MDIO Bus: probed
[ 0.279200] PPP generic driver version 2.4.2
[ 0.279259] tun: Universal TUN/TAP device driver, 1.6
[ 0.279261] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.279396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.279421] alloc irq_desc for 23 on node -1
[ 0.279423] alloc kstat_irqs on node -1
[ 0.279429] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.279448] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.279452] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.279490] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.279512] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.279524] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.283421] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.283463] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9cfbc00
[ 0.331102] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.331262] usb usb1: configuration #1 chosen from 1 choice
[ 0.331298] hub 1-0:1.0: USB hub found
[ 0.331310] hub 1-0:1.0: 8 ports detected
[ 0.331425] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.331451] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.331513] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.331524] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.331528] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.331576] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.331605] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.331710] usb usb2: configuration #1 chosen from 1 choice
[ 0.331740] hub 2-0:1.0: USB hub found
[ 0.331749] hub 2-0:1.0: 2 ports detected
[ 0.331805] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.331811] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.331815] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.331861] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.331885] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.331985] usb usb3: configuration #1 chosen from 1 choice
[ 0.332022] hub 3-0:1.0: USB hub found
[ 0.332029] hub 3-0:1.0: 2 ports detected
[ 0.332082] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.332088] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.332092] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.332126] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.332163] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.332272] usb usb4: configuration #1 chosen from 1 choice
[ 0.332302] hub 4-0:1.0: USB hub found
[ 0.332310] hub 4-0:1.0: 2 ports detected
[ 0.332362] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.332369] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.332373] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.332408] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.332440] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.332541] usb usb5: configuration #1 chosen from 1 choice
[ 0.332570] hub 5-0:1.0: USB hub found
[ 0.332578] hub 5-0:1.0: 2 ports detected
[ 0.332697] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.332699] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.333438] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.333588] mice: PS/2 mouse device common for all mice
[ 0.333821] rtc_cmos 00:03: RTC can wake from S4
[ 0.333869] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.333895] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.334031] device-mapper: uevent: version 1.0.3
[ 0.377886] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.389261] Freeing initrd memory: 7523k freed
[ 0.465337] device-mapper: multipath: version 1.1.0 loaded
[ 0.465343] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.465558] EISA: Probing bus 0 at eisa.0
[ 0.465566] Cannot allocate resource for EISA slot 1
[ 0.465589] EISA: Detected 0 cards.
[ 0.465675] cpuidle: using governor ladder
[ 0.465677] cpuidle: using governor menu
[ 0.466221] TCP cubic registered
[ 0.466402] NET: Registered protocol family 10
[ 0.466974] lo: Disabled Privacy Extensions
[ 0.467392] NET: Registered protocol family 17
[ 0.476515] Using IPI No-Shortcut mode
[ 0.476634] PM: Resume from disk failed.
[ 0.476647] registered taskstats version 1
[ 0.477010] Magic number: 2:476:546
[ 0.477051] mem null: hash matches
[ 0.477098] rtc_cmos 00:03: setting system clock to 2010-07-13 19:31:15 UTC (1279049475)
[ 0.477102] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.477104] EDD information not available.
[ 0.486666] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.520310] ata1.00: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 0.520427] ata3.01: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
[ 0.520430] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.535860] ata1.00: configured for UDMA/33
[ 0.536052] ata3.01: configured for UDMA/133
[ 0.650214] isapnp: No Plug & Play device found
[ 0.650827] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 0.654588] sr0: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 0.654593] Uniform CD-ROM driver Revision: 3.20
[ 0.654762] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.654843] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.655030] scsi 2:0:1:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 0.655155] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.655169] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 0.655216] sd 2:0:1:0: [sda] Write Protect is off
[ 0.655220] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 0.655249] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.655407] sda: sda1 sda2 < sda5 >
[ 0.694350] sd 2:0:1:0: [sda] Attached SCSI disk
[ 0.694365] Freeing unused kernel memory: 660k freed
[ 0.694720] Write protecting the kernel text: 4680k
[ 0.694769] Write protecting the kernel read-only data: 1840k
[ 0.715427] udev: starting version 151
[ 0.828680] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.828707] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.828756] r8169 0000:01:00.0: setting latency timer to 64
[ 0.828819] alloc irq_desc for 27 on node -1
[ 0.828822] alloc kstat_irqs on node -1
[ 0.828839] r8169 0000:01:00.0: irq 27 for MSI/MSI-X
[ 0.835660] eth0: RTL8101e at 0xf803a000, 00:19:66:2b:53:d5, XID 14000000 IRQ 27
[ 1.088697] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 7.112629] udev: starting version 151
[ 7.138036] Adding 9828344k swap on /dev/sda5. Priority:-1 extents:1 across:9828344k
[ 7.281675] Linux agpgart interface v0.103
[ 7.429122] nvidia: module license 'NVIDIA' taints kernel.
[ 7.429127] Disabling lock debugging due to kernel taint
[ 7.618342] r8169: eth0: link up
[ 7.618349] r8169: eth0: link up
[ 8.356694] lp: driver loaded but no devices found
[ 8.590228] intel_rng: FWH not detected
[ 8.590300] nvidia 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.590310] nvidia 0000:03:00.0: setting latency timer to 64
[ 8.590316] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.591137] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 8.635822] RPC: Registered udp transport module.
[ 8.635826] RPC: Registered tcp transport module.
[ 8.635828] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.658031] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.658096] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.669711] hsetroot[589]: segfault at 88 ip 08049c46 sp bfb0f760 error 4 in hsetroot[8048000+4000]
[ 8.736992] hda_codec: ALC888: BIOS auto-probing.
[ 8.738481] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 8.814339] Linux video capture interface: v2.00
[ 8.952278] cx23885 driver version 0.0.2 loaded
[ 8.952337] cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.952403] CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected]
[ 9.076520] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.136269] cx23885_dvb_register() allocating 1 frontend(s)
[ 9.138266] cx23885[0]: cx23885 based dvb card
[ 9.180295] DS3000 chip version: 0.192 attached.
[ 9.180300] DVB: registering new adapter (cx23885[0])
[ 9.180304] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 9.207574] TeVii S470 MAC= 00:18:BD:5B:28:2E
[ 9.207579] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 9.207587] cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xf9e00000
[ 9.207595] cx23885 0000:02:00.0: setting latency timer to 64
[ 9.207601] IRQ 16/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.266487] svc: failed to register lockdv1 RPC service (errno 97).
[ 10.270902] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 10.271173] NFSD: starting 90-second grace period
[ 10.909589] CPU0 attaching NULL sched-domain.
[ 10.909597] CPU1 attaching NULL sched-domain.
[ 10.936612] CPU0 attaching sched-domain:
[ 10.936618] domain 0: span 0-1 level MC
[ 10.936623] groups: 0 1
[ 10.936634] CPU1 attaching sched-domain:
[ 10.936637] domain 0: span 0-1 level MC
[ 10.936641] groups: 1 0
[ 18.368013] eth0: no IPv6 routers present

netvista-fan · 13. Juli 2010

Nutze zwar nur Ubuntu, aber da reichts liplianin zu installieren und die Firmware ins richtige Verzeichniss zu kopieren.

stillgelegt4 · 14. Juli 2010

Hallo,

wenn ich die ganzen Informationen die ich zu einem Setup mit yaVDR und der Tevii S470 gefunden habe zusammenfasse, sieht das Problem für mich folgendermaßen aus:

1. Den Infrarot-Empfänger kann ich vergessen mit dem yaVDR 0.2 Kernel
-> Kernel-Patch CX23885-ir existiert (https://patchwork.kernel.org/patch/73795/) und ist in 2.6.34 integriert

2. Für Kernel < 2.6.33 soll man verschiedene Arbeitsschritt ausführen, aber ab 2.6.33 soll CX23885 out-of-th-box funktionieren, wenn Firmware eingespielt ist
-> 2.6.34 einsetzen

3. Und die persönlichen Vorlieben deckt der yaVDR 2.6.32-23 auch nicht ab:
- deadline als I/O Sched
- Prozessor-Optimierung
- Anderer Flußkontroll-Algorithmus
- CFLAGS="-O2 -march=native"

Also einen eigenen Kernel backen. Fragt sich nur, ob die Package Maintainer der NVidia-Module und sonstiger yaVDR-Blobs auch die Tools zum bauen der Module gegen einen anderen Kernel in yaVDR mitliefern.

Tun sie das?

Hat jemand hier einen 2.6.34.1 mit yaVDR 0.2 erfolgreich im Einsatz?

Grüße

Tobias · 14. Juli 2010

es wäre schön wenn du die ellenlangen Logs als Anhang mitgibst... erleichtert das lesen des Threads ungemein

gda · 14. Juli 2010

Zitat

Original von <stillgelegt>
Fragt sich nur, ob die Package Maintainer der NVidia-Module und sonstiger yaVDR-Blobs auch die Tools zum bauen der Module gegen einen anderen Kernel in yaVDR mitliefern.

Tun sie das?

Ja!

Gerald

gda · 14. Juli 2010

Zitat
Original von <stillgelegt>
1. Skript von linuxtv.org ausgeführt:
http://www.linuxtv.org/wiki/in…/TeVii_S470#Older_kernels
2.
Code
apt-get install s2-liplianin-dkms
ausgeführt und danach

Das verstehe ich absolut nicht. Erst holst du den Treiber aus dem HG und baust ihn selber und dann installierst du noch unser Treiber-Paket. Warum? Doppelt genäht hält besser? Warum hast du nicht schon bei der Installation den Treiber ausgewählt? Auf jeden Fall kann ich mir nicht vorstellen, dass diese ungesunde Mischung aus Treiber-Modulen funktionieren wird.

Gerald

stillgelegt4 · 14. Juli 2010

Hallo,

ganz einfach: Unwissenheit ueber die Linux TV-Subsysteme. Und weil ich kein Freund von hundertmal neu Installieren bin, werde ich das per Hand gradebiegen und dann aufbauend auf eurer Kernel-Konfiguration mal einen eigenen Kernel backen und dabei auch gleich in Documentation/ nach einer Beschreibung des TV-Krams suchen und lesen

Zu meiner Verteidigung:
Ansonsten fehlt (verstaendlicherweise) eine zentrale ausfuehrliche Dokumentation von yaVDR die erschoepfend alle Fehlerfaelle beschreibt, wie es das z.B. annaehernd bei der Dreambox gibt. Stuende als OSS-Projekt bei mir aber auch ganz unten auf der ToDo

EDIT: Bisher bin ich mit dem Baukasten den ihr liefert sehr zufrieden. Macht ihr gut
EDIT2: Habt ihr einen IRC-Channel?

Gruesse

gda · 14. Juli 2010

Zitat

Original von <stillgelegt>
Ansonsten fehlt (verstaendlicherweise) eine zentrale ausfuehrliche Dokumentation von yaVDR die erschoepfend alle Fehlerfaelle beschreibt

Solch eine Dokumentation kann es nicht geben, weil man nicht auf alle Fehlerfälle kommen kann. Was sollte denn in der Dokumentation stehen? Installiert den DVB-Treiber nicht 2 mal? Dann müsste wohl auch rein: Gießt kein Wasser in den VDR. Auf jeden Fall hat keiner von uns Lust und Zeit eine solche Dokumentation zu erstellen und zu pflegen. Freiwillige vor.

Gerald

Andal · 14. Juli 2010

Hallo <stillgelegt>,

hast Du das gemacht?

Code

wget -c http://tevii.com/tevii_ds3000.tar.gz   
tar xfv tevii_ds3000.tar.gz   
sudo cp tevii_ds3000/dvb-fe-ds3000.fw /lib/firmware/

Dies musste ich machen nachdem ich yaVDR 0.2 installiert hatte.
Seither habe die Tevii S470 erfolgreich bei mir im Einsatz.
Da der IR empfänger der Tevii nicht funzt habe ich den Atric rev. 5 angeschlossen.

stillgelegt4 · 14. Juli 2010

Hallo Andal,

benutzt du die normalen v4l Pakete oder hast du bereits bei der Installation s2-liplian gewaehlt?

Falls solche Arbeitsschritte bei vielen DVB-S Karten notwendig sind, wuerde es sich doch lohnen ein entsprechenden Debian-Paket dafuer mit den aktuellen Skripten und URLs zu bauen. Quasi ein "install-firmware-cx23885" all-architectures Paket fuer yaVDR. So koennte man den Aufwand vergessen, ein huebsches ncurses-Interface drum herum oder gar ins Webinterface einbauen und schon ist man fertig.

Gibt es da lizenzrechtliche Bedenken? Wenn das bei mir die Loesung bringt, baue ich es mal als Beispiel fuer die Tevii S470.

Gruesse

Andal · 14. Juli 2010

Hi <stillgelegt>,

ich hab die s2-liplian installiert. Mit v4l habe ich es noch nicht versucht.

gda · 14. Juli 2010

Zitat

Original von <stillgelegt>

Wenn das bei mir die Loesung bringt, baue ich es mal als Beispiel fuer die Tevii S470.

Wenn mich nicht alles täuscht, dann sollten die Files eigentlich in dem Paket linux-firmware-tvt sein. Vielleicht verifiziert das mal einer.

Gerald

stillgelegt4 · 14. Juli 2010

Moin,
pruefe ich heut abend mal zusammen MIT dem neuen Kernel wie auch ggf. Ohne.

Gruesse

pandel · 15. Juli 2010

Nur zur Info:

Ich hatte mit dem v4l dkms Paket auch meine Probleme, habe es dann rausgeworfen und liplianin installiert und mir aus dem bereits genannten Tar NUR die fw Datei kopiert (siehe Andals Beitrag).

Das reicht, um die Karte zum Arbeiten zu überreden.

gda
Habe gerade mal aus Neugier in meiner VM das Paket linux-firmware-tvt installiert, weil ich das auch nicht kannte, aber durchaus nutzen würde. Merkwürdigerweise ist lt. dpkg -L außer den übelichen Verdächtigen unter usr/share/docs nichts in diesem Paket enthalten. apt-get hat mir das Paket linux-firmware-tvt Version 1.1-1tvt1 installiert, falls das hilft.

Auszug aus dem Build-Log

Code

chroot-autobuild/build/buildd/linux-firmware-tvt_1.1-1tvt1_all.deb:
drwxr-xr-x root/root         0 2010-03-22 22:32 ./
drwxr-xr-x root/root         0 2010-03-22 22:32 ./usr/
drwxr-xr-x root/root         0 2010-03-22 22:32 ./usr/share/
drwxr-xr-x root/root         0 2010-03-22 22:32 ./usr/share/doc/
drwxr-xr-x root/root         0 2010-03-22 22:32 ./usr/share/doc/linux-firmware-tvt/
-rw-r--r-- root/root       197 2010-02-06 16:20 ./usr/share/doc/linux-firmware-tvt/changelog.Debian.gz
-rw-r--r-- root/root       581 2010-02-06 16:21 ./usr/share/doc/linux-firmware-tvt/copyright

BTW, könnte man das Paket nicht einfach über yavdr-essential oder s2-liplianin-dkms Abhängigkeiten mitinstallieren?

gda · 15. Juli 2010

Okay, Paket ist also kaputt, müssen wir uns ansehen.

Zitat

Original von pandel
BTW, könnte man das Paket nicht einfach über yavdr-essential oder s2-liplianin-dkms Abhängigkeiten mitinstallieren?

War angedacht, sind uns nicht ganz sicher ob wir das distributieren dürfen.

Gerald

pandel · 15. Juli 2010

Ach so, verstehe. Dann würds ja vielleicht auch reichen, wenn man es dick und fett in dem "Feedback...welche Karten laufen" - Thread markiert, daß man sich für die Karten dieses Paket nachinstalliert. Der Thread hat mir damals ganz gut geholfen, welche Karte ich nehmen soll...!

stillgelegt4 · 15. Juli 2010

Hallo,

mit einem 2.6.34.1 mit cx23885-ir patches direkt in yaVDR 0.2 installiert funktioniert es auch. Karte wird erkannt, Infrarot-Empfaenger fuer inputLIRC wird erkannt und man findet sogar Kanaele Weiter bin ich noch nicht.

Gruesse

gda · 15. Juli 2010

Zitat

Original von <stillgelegt>
mit einem 2.6.34.1 mit cx23885-ir patches direkt in yaVDR 0.2 installiert funktioniert es auch. Karte wird erkannt, Infrarot-Empfaenger fuer inputLIRC wird erkannt und man findet sogar Kanaele Weiter bin ich noch nicht.

Bei einem neuen Kernel ist es immer spannend, ob denn so Sachen wie S3,S4,WOL,ACPI-Wakeup noch funktionieren, so sie es denn vorher getan haben.

Gerald

Tevii S470 wird nicht erkannt - Welches DVB-Subsystem nutzen?

Jetzt mitmachen!

Teilen