kein ton über hdmi (G210)

  • Hallo,


    ich benutze Suchfunktion schon seit 2 Tage... und nichts hat geholfen.


    der Ton will einfach nicht :(


    Distro ist FreeVDR 2.1 mit gepatchten Alsa treiber.


    cat /proc/asound/version

    Code
    Advanced Linux Sound Architecture Driver Version 1.0.22. Compiled on May 28 2010 for kernel 2.6.32-7-generic (SMP).


    aplay -l

    Code
    **** Liste der Hardware-Geräte (PLAYBACK) ****
     Karte 0: NVidia [HDA NVidia], Gerät 3: NVIDIA HDMI [NVIDIA HDMI]   
    Sub-Geräte: 1/1   Sub-Gerät #0: subdevice #0 
    Karte 0: NVidia [HDA NVidia], Gerät 7: NVIDIA HDMI [NVIDIA HDMI]   
    Sub-Geräte: 0/1   Sub-Gerät #0: subdevice #0



    aplay -L

    Code
    null     
    Discard all samples (playback) or generate zero samples (capture) 
    hdmi:CARD=NVidia    
     HDA NVidia, NVIDIA HDMI     
    HDMI Audio Output



    cat /etc/asound.conf

    Code
    pcm.!default 
    { type 
    hw card 0 
    device 7 
    }



    cat /etc/modprobe.d/sound.conf

    Code
    #options snd-hda-intel enable_msi=0 
    options snd-hda-intel probe_mask=0xffff,0xfff2


    Grafikkarte ist COLORFUL Nvidia G210



    ???



    MfG,
    Osmanovic

  • den alten mute trick im alsamixer probiert?

    VDR1: Silverstone SST-LC14S-M, M3N78, AMD Athlon64 5600+, 2G Ram, 2x SATELCO EasyWatch PCI DVB-C, NVIDIA GT218 [GeForce 210] (rev a2), YaVDR 0.6.1
    VDR2: Antec Mini-ITX Case "ISK300-65", AT3IONT-I Deluxe, 2GRam, 32G SSD, Atric Einschalter, YaVDR 0.6.1
    VDR4: Antec Fusion Remote, GA-M68MT-D3, EN210 Silent/DI/512MD2 LP, SATELCO EasyWatch PCI DVB-C, YavDR 0.5

  • Im Alsamixer die richtige Karte ausgewählt und "Mute" auf allen Geräten entfernt?
    In der Config zu xine bzw. xineliboutput das richtige Device zur Karte eingestellt? In deinem Fall wäre das hw:0,7
    Probier mal ohne die sound.conf in modprobe.d. Ich brauch die Datei auch nicht.


    Gruß
    iNOB

  • Danke.....


    Problem gelöst!


    falls jemand die gleiche GraKa besitzt, hier die Lösung:
    /etc/modprobe.d/sound.conf ist FALSCH!


    richtig ist: /etc/modprobe.d/sound
    mit dem Inhalt:

    Code
    options snd-hda-intel enable_msi=0 probe_mask=4


    aplay -l zeigt bei mir:

    Zitat


    **** Liste der Hardware-Geräte (PLAYBACK) ****
    Karte 0: NVidia [HDA NVidia], Gerät 3: NVIDIA HDMI [NVIDIA HDMI]
    Sub-Geräte: 0/1
    Sub-Gerät #0: subdevice #0



    cat /etc/asound.conf

    Code
    pcm.!default {
    type hw
    card 0
    device 3
    }


    rebooten
    alsamixer starten un unmuten
    das wars!


    LG,
    Osmanovic

  • hello everyone.... I am new to this forum and was reading some threads... i'm really impressed to see the response of the admins/moderators towards the problem users mentioned... its really great to be here..
    i m now sure that if i face some problem then i will have gud assistance from this forum... thanks everyone


    :portal1

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!