Hallo,
nach langer Wohnungssuche jetzt endlich ein neues Zuhause.... keine Satelittenschüssel mehr 
Also habe ich in meinen Lin eine DVB-C karte zu meiner ff DVB-S gesteckt. Bekomme nun aber immer nur: Kanal nicht verfügbar.
Ich habe mir von wiki die passende Channel´s list runtergeladen und eingestellt. Wenn ich den Channel editire steht dort auch Quelle: Cable-C
Allerdings:
linvdr:~# dmesg | grep frontend
DVB: registering frontend 0 (Philips TDA8083 DVB-S)...
und:
linvdr:~# dmesg | grep -i dvb
saa7146: register extension 'dvb'.
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80ff2623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
DVB: registering frontend 0 (Philips TDA8083 DVB-S)...
input: DVB on-card IR receiver as /class/input/input1
dvb-ttpci: found av7110-0.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
ergibt im logread:
May 19 11:42:20 linvdr user.debug vdr[1311]: tuner on device 1 thread started (pid=1311, tid=1026)
May 19 11:42:20 linvdr user.debug vdr[1306]: probing /dev/dvb/adapter1/frontend0
May 19 11:42:20 linvdr user.info vdr[1306]: found 1 video device
May 19 11:42:20 linvdr user.info vdr[1306]: setting primary device to 1
May 19 11:42:20 linvdr user.info vdr[1306]: SVDRP listening on port 2001
May 19 11:42:20 linvdr user.debug vdr[1312]: Section handler thread started (pid=1312, tid=2051)
May 19 11:42:20 linvdr user.info vdr[1306]: switching to channel 1
May 19 11:42:20 linvdr user.info vdr[1306]: info: Kanal nicht verfügbar!
bitte um hilfe
lg nixe
Nachtrag:
vielleicht hilfe das hier auch noch weiter:
linvdr:~# lspci -v
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
Subsystem: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] #09 [9104]
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 05) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d4000000-d40fffff
00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 05)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 05) (prog-if 80 [Master])
Subsystem: Micro-star International Co Ltd: Unknown device 5341
Flags: bus master, medium devsel, latency 0
I/O ports at f000 [size=16]
00:1f.3 SMBus: Intel Corp. 82820 820 (Camino 2) Chipset SMBus (rev 05)
Subsystem: Micro-star International Co Ltd: Unknown device 5341
Flags: medium devsel, IRQ 10
I/O ports at 5000 [size=16]
02:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Unknown device 1894:002c
Flags: bus master, medium devsel, latency 32, IRQ 12
Memory at d4000000 (32-bit, non-prefetchable) [size=512]
02:01.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 0000
Flags: bus master, medium devsel, latency 32, IRQ 17
Memory at d4001000 (32-bit, non-prefetchable) [size=512]
02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at c000 [size=256]
Memory at d4002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
.. super 
danke .. jetzt tuts... voll super!!
TUT