Hallo zusammen,
ich versuche mir nach der Anleitung OpenSUSE VDR DVB-S2 einen VDR mit einer TT-3200 und einer HDe zu bauen.
Jedoch komme ich momentan nichtmehr weiter, da ich meine HDe nicht anpingen kann.
Folgende Meldungen werden bei den jeweilegen Befehlen ausgegeben:
dmesg
Zitathdshm_init_struct: Phys start db000000, start e1500000, nc-start e4300000
hde_fb: init 0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
tun0: Disabled Privacy Extensions
ifconfig
ZitatAlles anzeigentun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:192.168.99.130 P-t-P:192.168.99.130 Mask:255.255.255.252
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:8300 Metric:1
RX packets:935 errors:0 dropped:0 overruns:0 frame:0
TX packets:934 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:29943 (29.2 Kb) TX bytes:508012 (496.1 Kb)
ping 192.168.99.129
ZitatAlles anzeigen
PING 192.168.99.129 (192.168.99.129) 56(84) bytes of data.
64 bytes from 192.168.99.129: icmp_seq=1 ttl=64 time=4.83 ms
64 bytes from 192.168.99.129: icmp_seq=2 ttl=64 time=4.04 ms
64 bytes from 192.168.99.129: icmp_seq=3 ttl=64 time=4.03 ms
64 bytes from 192.168.99.129: icmp_seq=4 ttl=64 time=4.03 ms
64 bytes from 192.168.99.129: icmp_seq=5 ttl=64 time=4.02 ms
64 bytes from 192.168.99.129: icmp_seq=6 ttl=64 time=8.03 ms
64 bytes from 192.168.99.129: icmp_seq=7 ttl=64 time=8.03 ms
64 bytes from 192.168.99.129: icmp_seq=8 ttl=64 time=8.03 ms
64 bytes from 192.168.99.129: icmp_seq=9 ttl=64 time=8.03 ms
64 bytes from 192.168.99.129: icmp_seq=10 ttl=64 time=8.03 ms
64 bytes from 192.168.99.129: icmp_seq=11 ttl=64 time=8.02 ms
.
.
.
Habt ihr eine Idee woran das liegt??
TFTP Server ist laut Anleitung eingerichtet.
Gruß Martin