SOLVED - /dev/fb0 no such device & DVB PCI Karte wird nicht erkannt

Hallo Leute hab mir einen neuen PC als VDR zugelegt. Es ist ein Compaq Deskpro EN. So weit so gut. Hab LinVDR 0.7 drauf installiert und habe nun folgendes Problem:

Irgendwie wird wohl die DVB Karte (technotrend fullfeatured 1.3) nicht erkannt. Sie sitzt auf einer RiserCard.

Beim Start des VDR bekomme ich folgende Meldung:

/dev/fb0 no such device

Kennt einer von Euch das Problem und wenn ja, wie bekomme ich es gelöst???

Cowboy

[UPDATE]
Es handelt sich um folgende Karte: DVB-S Sat Tunerkarte PCI Rev. 1.6 !!! Und nicht um eine Rev. 1.3 Karte wie irrtümlicherweise angegeben !!!
[/UPDATE]

Hallo xnalpf,

danke für deine schnelle Antwort. Bin leider kein Linux Crack, weshalb mir das nicht selber aufgefallen ist. Du hast aber wohl recht damit, denn beim Booten bringt er immer eine Fehlermeldung, dass der VGA Modus nicht korrekt wäre. Daraufhin kann man eine mauelle Auswahl tätigen, das System scannen oder einfach 30 sec. warten. Dann nämlich wird der Bootvorgang fortgesetzt und er wählt wohl irgendeinen Standard, der aber wohl nicht passt. Naja für den Moment ist mir das eigentlich grad egal, da ich ja an dem TV Bild interessiert bin.

Werde heute Abend mal testen ob etwas auf dem Fernseher erscheint. Auf dem Bildschirm des PC kommt definitiv nichts wenn ich mit Alt+F10 umschalte.

Kannst mir noch einen Tipp geben wo ich di von dir angesprochennen Dateien finden kann?

Danke Cowboy

Ok, hab die Befehle mal durgeführt. Mir sagen die Ergebnisse aber leider recht wenig. Bin also voll auf Eure Hilfe angewiesen !!!

Hier das Ergebnis für lsmod:

Module Size Used by
lirc_serial 12896 1
b2c2_flexcop_pci 9496 0
b2c2_flexcop 28684 1 b2c2_flexcop_pci
mt352 6404 1 b2c2_flexcop
bcm3510 10116 1 b2c2_flexcop
nxt200x 12804 1 b2c2_flexcop
lgdt330x 7836 1 b2c2_flexcop
budget_av 17408 0
dvb_pll 14212 2 b2c2_flexcop,budget_av
tda10021 6660 1 budget_av
budget_ci 15360 0
budget 10112 0
s5h1420 8580 1 budget
budget_core 9732 3 budget_av,budget_ci,budget
dvb_ttpci 87876 19
lnbp21 2432 3 budget_ci,budget,dvb_ttpci
l64781 7044 2 budget,dvb_ttpci
tda8083 6020 2 budget,dvb_ttpci
sp8870 7308 1 dvb_ttpci
stv0297 7296 3 b2c2_flexcop,budget_ci,dvb_ttpci
ttpci_eeprom 2688 2 budget_core,dvb_ttpci
saa7146_vv 43776 2 budget_av,dvb_ttpci
saa7146 17032 6 budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
mt312 7428 1 b2c2_flexcop
cx24110 7812 0
tda1004x 13828 2 budget_av,budget_ci
firmware_class 9984 8 b2c2_flexcop,bcm3510,nxt200x,budget_av,budget_ci,dvb_ttpci,sp8870,tda1004x
ves1820 6404 2 budget,dvb_ttpci
stv0299 10248 5 b2c2_flexcop,budget_av,budget_ci,budget,dvb_ttpci
ves1x93 6660 2 budget,dvb_ttpci
i2c_core 20112 25 b2c2_flexcop,mt352,bcm3510,nxt200x,lgdt330x,budget_av,dvb_pll,tda10021,budget_ci,budget,s5h1420,budget_core,dvb_ttpci,lnbp21,l64781,tda8083,sp8870,stv0297,ttpci_eeprom,mt312,cx24110,tda1004x,ves1820,stv0299,ves1x93
dvb_core 74920 7 b2c2_flexcop,budget_av,budget_ci,budget,budget_core,dvb_ttpci,stv0299
video_buf 23428 1 saa7146_vv
v4l2_common 14720 1 saa7146_vv
videodev 8960 1 saa7146_vv
evdev 9344 0
lirc_dev 14180 1 lirc_serial
e100 35716 0
mii 5504 1 e100
snd_via82xx 26136 0
gameport 14600 1 snd_via82xx
snd_ac97_codec 83232 1 snd_via82xx
snd_ac97_bus 2432 1 snd_ac97_codec
snd_pcm 78600 2 snd_via82xx,snd_ac97_codec
snd_timer 22276 1 snd_pcm
snd_page_alloc 10632 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7040 1 snd_via82xx
snd_rawmidi 23072 1 snd_mpu401_uart
snd_seq_device 8588 1 snd_rawmidi
snd 49380 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9440 1 snd
ehci_hcd 27912 0
uhci_hcd 29968 0
ohci_hcd 18692 0
cdfs 26920 0
linvdr:~# Module Size Used by
-bash: Module: command not found
lirc_serial 12896 1
linvdr:~# lirc_serial 12896 1
s5h1420 8580 1 budget
budget_core 9732 3 budget_av,budget_ci,budget
dvb_ttpci 87876 19
lnbp21 2432 3 budget_ci,budget,dvb_ttpci
l64781 7044 2 budget,dvb_ttpci
tda8083 6020 2 budget,dvb_ttpci
sp8870 7308 1 dvb_ttpci
-bash: lirc_serial: command not found
stv0297 7296 3 b2c2_flexcop,budget_ci,dvb_ttpci
ttpci_eeprom 2688 2 budget_core,dvb_ttpci
linvdr:~# b2c2_flexcop_pci 9496 0
video_buf 23428 1 saa7146_vv
v4l2_common 14720 1 saa7146_vv
videodev 8960 1 saa7146_vv
evdev 9344 0
lirc_dev 14180 1 lirc_serial
-bash: b2c2_flexcop_pci: command not found
e100 35716 0
linvdr:~# b2c2_flexcop 28684 1 b2c2_flexcop_pci
snd_timer 22276 1 snd_pcm
snd_page_alloc 10632 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7040 1 snd_via82xx
snd_rawmidi 23072 1 snd_mpu401_uart
snd_seq_device 8588 1 snd_rawmidi
snd 49380 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9440 1 snd
ehci_hcd 27912 0
uhci_hcd 29968 0
ohci_hcd 18692 0
cdfs 26920 0
-bash: b2c2_flexcop: command not found
linvdr:~# mt352 6404 1 b2c2_flexcop
-bash: mt352: command not found
linvdr:~# bcm3510 10116 1 b2c2_flexcop
-bash: bcm3510: command not found
linvdr:~# nxt200x 12804 1 b2c2_flexcop
-bash: nxt200x: command not found
linvdr:~# lgdt330x 7836 1 b2c2_flexcop
-bash: lgdt330x: command not found
linvdr:~# budget_av 17408 0
-bash: budget_av: command not found
linvdr:~# dvb_pll 14212 2 b2c2_flexcop,budget_av
-bash: dvb_pll: command not found
linvdr:~# tda10021 6660 1 budget_av
-bash: tda10021: command not found
linvdr:~# budget_ci 15360 0
-bash: budget_ci: command not found
linvdr:~# budget 10112 0
-bash: budget: command not found
linvdr:~# s5h1420 8580 1 budget
-bash: s5h1420: command not found
linvdr:~# budget_core 9732 3 budget_av,budget_ci,budget
-bash: budget_core: command not found
linvdr:~# dvb_ttpci 87876 19
-bash: dvb_ttpci: command not found
linvdr:~# lnbp21 2432 3 budget_ci,budget,dvb_ttpci
-bash: lnbp21: command not found
linvdr:~# l64781 7044 2 budget,dvb_ttpci
-bash: l64781: command not found
linvdr:~# tda8083 6020 2 budget,dvb_ttpci
-bash: tda8083: command not found
linvdr:~# sp8870 7308 1 dvb_ttpci
-bash: sp8870: command not found
linvdr:~# stv0297 7296 3 b2c2_flexcop,budget_ci,dvb_ttpci
-bash: stv0297: command not found
linvdr:~# ttpci_eeprom 2688 2 budget_core,dvb_ttpci
-bash: ttpci_eeprom: command not found
linvdr:~# saa7146_vv 43776 2 budget_av,dvb_ttpci
-bash: saa7146_vv: command not found
linvdr:~# saa7146 17032 6 budget_av,budget_ci,budget,budget_core,dvb_ttpci,saa7146_vv
-bash: saa7146: command not found
linvdr:~# mt312 7428 1 b2c2_flexcop
-bash: mt312: command not found
linvdr:~# cx24110 7812 0
-bash: cx24110: command not found
linvdr:~# tda1004x 13828 2 budget_av,budget_ci
-bash: tda1004x: command not found
linvdr:~# firmware_class 9984 8 b2c2_flexcop,bcm3510,nxt200x,budget_av,budget_ci,dvb_ttpci,sp8870,tda1004x
-bash: firmware_class: command not found
linvdr:~# ves1820 6404 2 budget,dvb_ttpci
-bash: ves1820: command not found
linvdr:~# stv0299 10248 5 b2c2_flexcop,budget_av,budget_ci,budget,dvb_ttpci
-bash: stv0299: command not found
linvdr:~# ves1x93 6660 2 budget,dvb_ttpci
-bash: ves1x93: command not found
linvdr:~# i2c_core 20112 25 b2c2_flexcop,mt352,bcm3510,nxt200x,lgdt330x,budget_av,dvb_pll,tda10021,budget_ci,budget,s5h1420,budget_core,dvb_ttpci,lnbp21,l64781,tda8083,sp8870,stv0297,ttpci_eeprom,mt312,cx24110,tda1004x,ves1820,stv0299,ves1x93
-bash: i2c_core: command not found
linvdr:~# dvb_core 74920 7 b2c2_flexcop,budget_av,budget_ci,budget,budget_core,dvb_ttpci,stv0299
-bash: dvb_core: command not found
linvdr:~# video_buf 23428 1 saa7146_vv
-bash: video_buf: command not found
linvdr:~# v4l2_common 14720 1 saa7146_vv
-bash: v4l2_common: command not found
linvdr:~# videodev 8960 1 saa7146_vv
-bash: videodev: command not found
linvdr:~# evdev 9344 0
-bash: evdev: command not found
linvdr:~# lirc_dev 14180 1 lirc_serial
-bash: lirc_dev: command not found
linvdr:~# e100 35716 0
-bash: e100: command not found
linvdr:~# mii 5504 1 e100
-bash: mii: command not found
linvdr:~# snd_via82xx 26136 0
-bash: snd_via82xx: command not found
linvdr:~# gameport 14600 1 snd_via82xx
-bash: gameport: command not found
linvdr:~# snd_ac97_codec 83232 1 snd_via82xx
-bash: snd_ac97_codec: command not found
linvdr:~# snd_ac97_bus 2432 1 snd_ac97_codec
-bash: snd_ac97_bus: command not found
linvdr:~# snd_pcm 78600 2 snd_via82xx,snd_ac97_codec
-bash: snd_pcm: command not found
linvdr:~# snd_timer 22276 1 snd_pcm
-bash: snd_timer: command not found
linvdr:~# snd_page_alloc 10632 2 snd_via82xx,snd_pcm
-bash: snd_page_alloc: command not found
linvdr:~# snd_mpu401_uart 7040 1 snd_via82xx
-bash: snd_mpu401_uart: command not found
linvdr:~# snd_rawmidi 23072 1 snd_mpu401_uart
-bash: snd_rawmidi: command not found
linvdr:~# snd_seq_device 8588 1 snd_rawmidi
-bash: snd_seq_device: command not found
linvdr:~# snd 49380 7 snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
-bash: snd: command not found
linvdr:~# soundcore 9440 1 snd
-bash: soundcore: command not found
linvdr:~# ehci_hcd 27912 0
-bash: ehci_hcd: command not found
linvdr:~# uhci_hcd 29968 0
-bash: uhci_hcd: command not found
linvdr:~# ohci_hcd 18692 0
-bash: ohci_hcd: command not found
linvdr:~# cdfs 26920 0
-bash: cdfs: command not found

Hier das Ergebnis für lspci:

00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 04)
00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82820 820 (Camino 2) Chipset ISA Bridge (ICH2) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82820 820 (Camino 2) Chipset IDE U100 (rev 02)
00:1f.4 USB Controller: Intel Corp. 82820 820 (Camino 2) Chipset USB (Hub B) (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82820 820 (Camino 2) Chipset AC'97 Audio Controller (rev 02)
02:08.0 Ethernet controller: Intel Corp. 82820 (ICH2) Chipset Ethernet Controller (rev 01)
02:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)

Hier das Ergebnis für dmesg:

*0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:00:02.0
PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0c: ioport range 0x400-0x41f has been reserved
pnp: 00:0c: ioport range 0x420-0x43f has been reserved
pnp: 00:0c: ioport range 0x440-0x45f has been reserved
pnp: 00:0c: ioport range 0x460-0x47f could not be reserved
pnp: 00:0c: ioport range 0xf800-0xf81f could not be reserved
pnp: 00:0c: ioport range 0xf820-0xf83f could not be reserved
pnp: 00:0c: ioport range 0xf840-0xf85f has been reserved
pnp: 00:0c: ioport range 0xf860-0xf87f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 40000000-403fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.25 [Flags: R/W].
JFS: nTxBlock = 1986, nTxLock = 15893
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PBTN]
ACPI: Processor [CPU0] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST3120026A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Compaq CRD-8484B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1
hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
libata version 1.20 loaded.
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 HUB COM1 COM2 USB1 USB2 PBTN
ACPI: (supports S0 S1 S3 S4 S5)
input: AT Translated Set 2 keyboard as /class/input/input0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 172k freed
EXT3 FS on hda1, internal journal
cdfs 2.6.12 loaded.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.4: irq 169, io base 0x00002440
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Adding 262136k swap on /var/vm/swapfile. Priority:-1 extents:68 across:267060k
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 177
e100: eth0: e100_probe: addr 0x40000000, irq 177, MAC addr 00:02:A5:AD:0D:FB
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 185
saa7146: found saa7146 @ mem d0a58000 (revision 1, irq 185) (0x13c2,0x0000).
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
adapter has MAC addr = 00:d0:5c:02:fc:0f
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (Philips TDA8083 DVB-S)...
input: DVB on-card IR receiver as /class/input/input1
dvb-ttpci: found av7110-0.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
lirc_dev: IR Remote Control driver registered, at major 61
lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip unloaded successfully
saa7146: unregister extension 'budget_av'.
saa7146: unregister extension 'budget_ci dvb'.
saa7146: unregister extension 'budget dvb'.
saa7146: unregister extension 'dvb'.
ACPI: PCI interrupt for device 0000:02:09.0 disabled
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 185
saa7146: found saa7146 @ mem d0a58000 (revision 1, irq 185) (0x13c2,0x0000).
DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
adapter has MAC addr = 00:d0:5c:02:fc:0f
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (Philips TDA8083 DVB-S)...
input: DVB on-card IR receiver as /class/input/input2
dvb-ttpci: found av7110-0.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0

Hoffentlich könnt Ihr mir weiterhelfen. Bin schon mal gespannt auf die ersten Antworten worans denn liegen könnte !!!

Cowboy

Seltsam, seltsam !!!

Hab das Ganze also mal an den Fernseher angeschlossen und siehe da ich hatte ein Bild. Super !!!Da sich der Fernseher aber in einem andrem Raum befindet habe ich den PC nochmals runtergefahren und im Büro wieder gestartet und den Befehl: ps aux | grep vdr eingegeben.
Weiter unten das Ergebnis.
So far so good. PC wieder runter gefahren und ins Fernsehzimmer damit. Gestartet (was übrigens nur geht wenn Tastatur angeschlossen ist, sonst bleibt er beim booten hängen) und siehe da kein Bild !!!! Lediglich das kurze Aufflackern des senkrechten Streifenmusters und das wars dann. Ok nochmals probiert -- selbes Ergebnis. Hab einfach kein Bild mehr hinbekommen !!! Bin am verzweifeln. HILFEEEEE.

Ein ps aux | grep vdr ergibt folgendes:

root 1166 0.0 99.9 1060 589505315 ? S 20:40 0:00 /bin/bash -c \? /bin/echo $$ > /var/run/vdr.pid; \? while /bin/true; do \? start=`date +%s`; \? /etc/init.d/runvdr up $WITHOUTDRIVER 2>&1 >/dev/null; \? stop=`date +%s`; \? if [ $(($stop - $start)) -lt 15 ] ; then \? echo "Something went wrong. VDR respawning to fast, sleeping one minute" > /dev/tty$VDRTTY; \? sleep 60; \? fi; \? sleep 1; \? /etc/init.d/runvdr down; \? sleep 5; \? done >/dev/null 2>/dev/null
root 1286 0.0 99.9 2144 589505315 ? S 20:40 0:00 udhcpc -i eth0 -b -H linvdr
root 1361 0.0 99.9 1412 589505315 tty2 S 20:41 0:00 grep vdr
root 1480 0.0 99.9 1100 589505315 ? S 20:43 0:00 /bin/bash /etc/init.d/runvdr up
root 1589 0.1 99.9 21604 589505315 ? S 20:43 0:00 /usr/bin/vdr -L /usr/lib/vdr/plugins -Padmin -Pchannelscan -Pconsole -Pepgsearch -Pfemon -Pgraphlcd -Pmailbox -Posdteletext -Ppluginsetup -Psetup -Psysinfo -Ptext2skin -Ptimeline -v /video0 -c /etc/vdr -w 900 -E /ramdisk/epg.data -s /usr/bin/poweroff.pl -r /usr/bin/noadcall.sh
root 1596 0.0 99.9 21604 589505315 ? S 20:43 0:00 /usr/bin/vdr -L /usr/lib/vdr/plugins -Padmin -Pchannelscan -Pconsole -Pepgsearch -Pfemon -Pgraphlcd -Pmailbox -Posdteletext -Ppluginsetup -Psetup -Psysinfo -Ptext2skin -Ptimeline -v /video0 -c /etc/vdr -w 900 -E /ramdisk/epg.data -s /usr/bin/poweroff.pl -r /usr/bin/noadcall.sh
root 1600 0.0 99.9 21604 589505315 ? R 20:43 0:00 /usr/bin/vdr -L /usr/lib/vdr/plugins -Padmin -Pchannelscan -Pconsole -Pepgsearch -Pfemon -Pgraphlcd -Pmailbox -Posdteletext -Ppluginsetup -Psetup -Psysinfo -Ptext2skin -Ptimeline -v /video0 -c /etc/vdr -w 900 -E /ramdisk/epg.data -s /usr/bin/poweroff.pl -r /usr/bin/noadcall.sh
root 1601 0.0 99.9 21604 589505315 ? SN 20:43 0:00 /usr/bin/vdr -L /usr/lib/vdr/plugins -Padmin -Pchannelscan -Pconsole -Pepgsearch -Pfemon -Pgraphlcd -Pmailbox -Posdteletext -Ppluginsetup -Psetup -Psysinfo -Ptext2skin -Ptimeline -v /video0 -c /etc/vdr -w 900 -E /ramdisk/epg.data -s /usr/bin/poweroff.pl -r /usr/bin/noadcall.sh
root 1605 0.0 99.9 21604 589505315 ? S 20:43 0:00 /usr/bin/vdr -L /usr/lib/vdr/plugins -Padmin -Pchannelscan -Pconsole -Pepgsearch -Pfemon -Pgraphlcd -Pmailbox -Posdteletext -Ppluginsetup -Psetup -Psysinfo -Ptext2skin -Ptimeline -v /video0 -c /etc/vdr -w 900 -E /ramdisk/epg.data -s /usr/bin/poweroff.pl -r /usr/bin/noadcall.sh
root 1607 0.0 99.9 10724 589505315 ? SN 20:43 0:00 /usr/bin/perl /usr/bin/vdradmind.pl
root 1618 0.0 99.9 1416 589505315 ttyp0 S 20:45 0:00 grep vdr

Hier noch das logread:

Aug 16 22:08:06 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
Aug 16 22:08:06 linvdr user.info kernel: e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
Aug 16 22:08:06 linvdr user.info kernel: e100: Copyright(c) 1999-2005 Intel Corporation
Aug 16 22:08:06 linvdr user.info kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 177
Aug 16 22:08:06 linvdr user.info kernel: e100: eth0: e100_probe: addr 0x44000000, irq 177, MAC addr 00:02:A5:AD:0D:FB
Aug 16 22:08:06 linvdr local0.info udhcpc[1168]: udhcpc (v0.9.9-pre) started
Aug 16 22:08:07 linvdr user.info kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Aug 16 22:08:07 linvdr local0.debug udhcpc[1168]: Sending discover...
Aug 16 22:08:07 linvdr user.info kernel: Linux video capture interface: v1.00
Aug 16 22:08:07 linvdr user.warn kernel: saa7146: register extension 'dvb'.
Aug 16 22:08:07 linvdr user.info kernel: ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 185
Aug 16 22:08:07 linvdr user.warn kernel: saa7146: found saa7146 @ mem d0a5c000 (revision 1, irq 185) (0x13c2,0x0000).
Aug 16 22:08:07 linvdr user.warn kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV DVB-S rev1.X or Fujitsu Siemens DVB-C).
Aug 16 22:08:07 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:02:fc:0f
Aug 16 22:08:08 linvdr user.warn kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f22623
Aug 16 22:08:08 linvdr user.warn kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Aug 16 22:08:08 linvdr user.warn kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
Aug 16 22:08:08 linvdr user.warn kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Aug 16 22:08:08 linvdr user.warn kernel: saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
Aug 16 22:08:08 linvdr user.warn kernel: DVB: registering frontend 0 (Philips TDA8083 DVB-S)...
Aug 16 22:08:08 linvdr user.info kernel: input: DVB on-card IR receiver as /class/input/input1
Aug 16 22:08:08 linvdr user.info kernel: dvb-ttpci: found av7110-0.
Aug 16 22:08:08 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
Aug 16 22:08:08 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
Aug 16 22:08:08 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
Aug 16 22:08:08 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Aug 16 22:08:08 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
Aug 16 22:08:08 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
Aug 16 22:08:09 linvdr local0.debug udhcpc[1168]: Sending discover...
Aug 16 22:08:09 linvdr local0.debug udhcpc[1168]: Sending select for 192.168.1.4...
Aug 16 22:08:09 linvdr local0.info udhcpc[1168]: Lease of 192.168.1.4 obtained, lease time 3600
Aug 16 22:08:09 linvdr auth.info sshd[1288]: Server listening on 0.0.0.0 port 22.
Aug 16 22:08:09 linvdr daemon.info init: ^MStarting pid 1295, console /dev/tty1: '/sbin/getty'
Aug 16 22:08:09 linvdr daemon.info init: ^MStarting pid 1296, console /dev/tty2: '/sbin/getty'
Aug 16 22:08:09 linvdr daemon.info init: ^MStarting pid 1298, console /dev/tty3: '/sbin/getty'
Aug 16 22:08:09 linvdr daemon.info init: ^MStarting pid 1299, console /dev/tty4: '/sbin/getty'
Aug 16 22:08:09 linvdr user.info kernel: lirc_serial: auto-detected active low receiver
Aug 16 22:08:09 linvdr user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
Aug 16 22:08:10 linvdr user.info vdr: [1323] VDR version 1.4.0-1 started
Aug 16 22:08:10 linvdr user.info vdr: [1323] Bigpatch 30.04.2006 is active!
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-admin.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-channelscan.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-console.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-epgsearch.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-mailbox.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-pluginsetup.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-setup.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-sysinfo.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading plugin: /usr/lib/vdr/plugins/libvdr-timeline.so.1.4.0
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/setup.conf
Aug 16 22:08:10 linvdr user.err vdr: [1323] ERROR: unknown config parameter: PreferredChannel = 0
Aug 16 22:08:10 linvdr user.err vdr: [1323] ERROR: unknown config parameter: RecordDolbyDigital = 1
Aug 16 22:08:10 linvdr user.err vdr: [1323] ERROR: unknown config parameter: ShowProgressBar = 0
Aug 16 22:08:10 linvdr user.err vdr: [1323] ERROR: unknown config parameter: SortTimers = 1
Aug 16 22:08:10 linvdr user.err vdr: [1323] ERROR: unknown config parameter: StartupVolume = 255
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/sources.conf
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/diseqc.conf
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/channels.conf
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/timers.conf
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/commands.conf
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/reccmds.conf
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/svdrphosts.conf
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/remote.conf
Aug 16 22:08:10 linvdr user.info vdr: [1323] loading /etc/vdr/keymacros.conf
Aug 16 22:08:10 linvdr user.debug vdr: [1323] reading EPG data from /ramdisk/epg.data
Aug 16 22:08:10 linvdr user.debug vdr: [1331] video directory scanner thread started (pid=1331, tid=1331)
Aug 16 22:08:10 linvdr user.debug vdr: [1332] video directory scanner thread started (pid=1332, tid=1332)
Aug 16 22:08:10 linvdr user.debug vdr: [1323] probing /dev/dvb/adapter0/frontend0
Aug 16 22:08:10 linvdr user.debug vdr: [1332] video directory scanner thread ended (pid=1332, tid=1332)
Aug 16 22:08:10 linvdr user.debug vdr: [1331] video directory scanner thread ended (pid=1331, tid=1331)
Aug 16 22:08:12 linvdr user.debug vdr: [1334] tuner on device 1 thread started (pid=1334, tid=1334)
Aug 16 22:08:12 linvdr user.debug vdr: [1335] section handler thread started (pid=1335, tid=1335)
Aug 16 22:08:12 linvdr user.debug vdr: [1323] probing /dev/dvb/adapter1/frontend0
Aug 16 22:08:12 linvdr user.info vdr: [1323] found 1 video device
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: admin (0.4.0): Administrative tasks
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: channelscan (0.1.0): Plugin for satelite scan
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: console (0.6.0): Expands VDR to a Console on TV
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: epgsearch (0.9.16): search the EPG for repeats and more
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: femon (1.0.0): DVB Signal Information Monitor (OSD)
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: graphlcd (0.1.3): Output to graphic LCD
Aug 16 22:08:12 linvdr user.info vdr: [1323] graphlcd: No config file specified, using default (/etc/graphlcd.conf).
Aug 16 22:08:12 linvdr user.info vdr: [1323] graphlcd: WARNING: No display specified, using first one (framebuffer).
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: mailbox (0.3.0): IMAP/POP3 mail-reader plugin
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: osdteletext (0.5.1): Displays teletext on the OSD
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: pluginsetup (0.0.6): Plugin Setup
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: setup (0.3.1): Minivdr-Setup
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: sysinfo (0.1.0): System information plugin
Aug 16 22:08:12 linvdr user.info vdr: framebuffer: The framebuffer device was opened successfully.
Aug 16 22:08:12 linvdr user.err vdr: framebuffer: Error reading fixed information.
Aug 16 22:08:12 linvdr user.err vdr: [1336] graphlcd: ERROR: Failed initializing display
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: text2skin (1.1-cvs): Loader for text-based skins
Aug 16 22:08:12 linvdr user.info vdr: [1323] initializing plugin: timeline (0.9.0): Show timer overview and collisions
Aug 16 22:08:12 linvdr user.info vdr: [1323] setting primary device to 1
Aug 16 22:08:12 linvdr user.info vdr: [1323] SVDRP listening on port 2001
Aug 16 22:08:13 linvdr user.info vdr: [1323] loading /etc/vdr/themes/classic-default.theme
Aug 16 22:08:13 linvdr user.info vdr: [1323] starting plugin: admin
Aug 16 22:08:13 linvdr user.info vdr: [1323] starting plugin: channelscan
Aug 16 22:08:13 linvdr user.info vdr: [1323] starting plugin: console
Aug 16 22:08:13 linvdr user.info vdr: [1339] console: output handler thread startet (pid=1339)
Aug 16 22:08:13 linvdr user.info vdr: [1323] starting plugin: epgsearch
Aug 16 22:08:13 linvdr user.info vdr: [1323] loading /etc/vdr/plugins/epgsearch.conf
Aug 16 22:08:13 linvdr user.info vdr: [1323] starting plugin: femon
Aug 16 22:08:13 linvdr user.info vdr: [1323] starting plugin: graphlcd
Aug 16 22:08:13 linvdr user.debug vdr: [1323] graphlcd: waiting for display thread to get ready
Aug 16 22:08:20 linvdr auth.info login[1296]: root login on `tty2'
Aug 16 22:08:40 linvdr cron.notice crond[1357]: crond 2.3.2 dillon, started, log level 8
Aug 16 22:09:26 linvdr auth.info sshd[1360]: Could not reverse map address 192.168.1.2.
Aug 16 22:09:26 linvdr auth.info sshd[1360]: Accepted password for root from 192.168.1.2 port 3157 ssh2
Aug 16 22:09:26 linvdr auth.info PAM_unix[1360]: (ssh) session opened for user root by (uid=0)
Aug 16 22:09:26 linvdr auth.err PAM-env[1360]: Unable to open config file: No such file or directory
Aug 16 22:09:26 linvdr auth.err PAM-env[1361]: Unable to open config file: No such file or directory
Aug 16 22:09:47 linvdr auth.info sshd[1364]: Could not reverse map address 192.168.1.2.
Aug 16 22:09:49 linvdr auth.info sshd[1364]: Accepted password for root from 192.168.1.2 port 3164 ssh2
Aug 16 22:09:49 linvdr auth.info PAM_unix[1364]: (ssh) session opened for user root by (uid=0)
Aug 16 22:09:49 linvdr auth.err PAM-env[1364]: Unable to open config file: No such file or directory
Aug 16 22:09:49 linvdr auth.err PAM-env[1365]: Unable to open config file: No such file or directory

@ Delaney:
Danke für den Tipp mit der Graka. Werde die Änderung heute Abend vornehmen.

k-pax:
Mensch, das wäre ja super geil, wenn dies das Problem lösen könnte. Ich hab tatsächlich ein LCD Display, doch hatte ich es bis dato noch nicht angeschlossen.

Werde mich heute Abend mal den Themen annehmen und dann wieder berichten !!!

Danke.
Cowboy

Hurra !!!
Der VDR laüft. Hab das GraphLCD Plugin deaktiviert und die entsprechende Änderung in der Datei menu.lst vorgenommen.
Ist nun ziemlich geil. Alles läuft recht reibungslos bis auf ein altes Problem mit meiner FF-Karte. Mache hierzu aber wohl besser einen neuen Thread auf:
Bildprobleme mit manchen Kanälen

Nochmals Danke für Eure Unterstützung