[LinVDR-package]: dxr3 für LinVDR 0.7 -jetzt mit AC3!

    Ja, Cody ist am 18. auf den Bigpatch Test4 gegangen: hier gleich im ersten Posting bei den Updates.
    Klar, kann ich verstehen, daß du abwarten willst. Kein Problem.


    Elian

    Server: FSC Scenic i815 - P3-866, 250 GB Samsung und gepanschtes LinVDR 0.7 mit VDR 1.3.37 und XXV-Resten :-0
    Client: FSC Activy 300 mit Mahlzeit 4.0ß2
    Client2: IBM NetVista P3-866...

    ach, was soll` s... lädt gerade hoch :D

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    wow- riesengroßes Dankeschön!!!

    Server: FSC Scenic i815 - P3-866, 250 GB Samsung und gepanschtes LinVDR 0.7 mit VDR 1.3.37 und XXV-Resten :-0
    Client: FSC Activy 300 mit Mahlzeit 4.0ß2
    Client2: IBM NetVista P3-866...

    Hallo zusammen,
    ich habe Probleme mit den beiden am 20.12 neu hinzugekommen Dateien: Kernel linvdr-kernel-2.6.14.2-neu.tgz sowie linvdr07_dxr3.tgz,
    vielleicht kann mir jemand helfen:


    FOlgenden Schritte habe ich durchgeführt:


    - saubere Neueinstallation Linvdr 0.7
    - Kernel nach http://drseltsam.device.name/vdr/kernel26142.html installiert + reboot
    - linvdr07_dxr3.tgz wie beschrieben entpackt und /etc/init.d/rcStart angepasst
    - /etc/sysconfig mod per hand wie beschrieben, steht jetzt nur das dxr3 Plugin drin: PLUGINLIST="dxr3"
    - reboot


    Verhalten danach: Bildschirm wird kurz grün, es ploppt einmal und der grüne Bildschirm verschwindet wieder, das ganze mit dem
    Wiederholungsintervall von ca. 1 minute


    Das Jungfräuliche logread liefert mir nach dem Start nach SSH login:
    linvdr:~# logread
    Dec 23 00:17:28 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04:47+0000)
    Dec 23 00:17:28 linvdr user.info kernel: PCI: Found IRQ 10 for device 0000:00:0e.0
    Dec 23 00:17:28 linvdr user.info kernel: em8300: EM8300 8300 (rev 2) bus: 0, devfn: 112, irq: 10, memory: 0xff000000.
    Dec 23 00:17:28 linvdr user.info kernel: em8300: mapped-memory at 0xd0c00000
    Dec 23 00:17:28 linvdr user.info kernel: em8300: using MTRR
    Dec 23 00:17:28 linvdr user.info kernel: em8300_main.o: Chip revision: 2
    Dec 23 00:17:28 linvdr user.notice kernel: adv717x.o: ADV7170 chip detected
    Dec 23 00:17:28 linvdr user.notice kernel: adv717x.o: Configuring for PAL 60
    Dec 23 00:17:28 linvdr user.info kernel: PCI: Found IRQ 11 for device 0000:00:11.0
    Dec 23 00:17:28 linvdr user.info kernel: PCI: Sharing IRQ 11 with 0000:00:07.2
    Dec 23 00:17:28 linvdr user.warn kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
    Dec 23 00:17:28 linvdr user.info kernel: 0000:00:11.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xdc00. Vers LK1.1.19
    Dec 23 00:17:28 linvdr user.info kernel: PCI: Found IRQ 11 for device 0000:00:11.0
    Dec 23 00:17:28 linvdr user.info kernel: PCI: Sharing IRQ 11 with 0000:00:07.2
    Dec 23 00:17:28 linvdr auth.info sshd[1119]: Server listening on 0.0.0.0 port 22.
    Dec 23 00:17:28 linvdr user.info kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    Dec 23 00:17:29 linvdr daemon.info init: ^MStarting pid 1130, console /dev/tty1: '/sbin/getty'
    Dec 23 00:17:29 linvdr daemon.info init: ^MStarting pid 1131, console /dev/tty2: '/sbin/getty'
    Dec 23 00:17:29 linvdr daemon.info init: ^MStarting pid 1133, console /dev/tty3: '/sbin/getty'
    Dec 23 00:17:29 linvdr daemon.info init: ^MStarting pid 1135, console /dev/tty4: '/sbin/getty'
    Dec 23 00:17:29 linvdr user.info kernel: Linux video capture interface: v1.00
    Dec 23 00:17:30 linvdr user.warn kernel: saa7146: register extension 'dvb'.
    Dec 23 00:17:30 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
    Dec 23 00:17:30 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
    Dec 23 00:17:30 linvdr user.info kernel: PCI: Found IRQ 11 for device 0000:00:0d.0
    Dec 23 00:17:30 linvdr user.info kernel: PCI: Sharing IRQ 11 with 0000:01:00.0
    Dec 23 00:17:30 linvdr user.warn kernel: saa7146: found saa7146 @ mem d0d5c400 (revision 1, irq 11) (0x13c2,0x1011).
    Dec 23 00:17:30 linvdr user.warn kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-T^I PCI).
    Dec 23 00:17:32 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:24:17:e1
    Dec 23 00:17:32 linvdr user.warn kernel: DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
    Dec 23 00:17:32 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
    Dec 23 00:17:33 linvdr user.info vdr[1241]: VDR version 1.3.17 started
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.17
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.3.17
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/setup.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/sources.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/diseqc.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/channels.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/commands.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/reccmds.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/svdrphosts.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/ca.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/remote.conf
    Dec 23 00:17:33 linvdr user.info vdr[1241]: loading /etc/vdr/keymacros.conf
    Dec 23 00:17:33 linvdr user.debug vdr[1241]: probing /dev/dvb/adapter0/frontend0
    Dec 23 00:17:33 linvdr user.info kernel: tda1004x: found firmware revision 0 -- invalid
    Dec 23 00:17:33 linvdr user.info kernel: tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
    Dec 23 00:17:34 linvdr user.info kernel: tda1004x: firmware upload complete
    Dec 23 00:17:35 linvdr user.info kernel: tda1004x: found firmware revision 2c -- ok
    Dec 23 00:17:35 linvdr user.debug vdr[1241]: probing /dev/dvb/adapter1/frontend0
    Dec 23 00:17:35 linvdr user.info vdr[1241]: found 1 video device
    Dec 23 00:17:35 linvdr user.info vdr[1241]: initializing plugin: dxr3 (0.2.4-cvs): Hardware MPEG decoder
    Dec 23 00:17:35 linvdr user.debug vdr[1249]: tuner on device 1 thread started (pid=1249, tid=1026)
    Dec 23 00:17:35 linvdr user.debug vdr[1250]: Section handler thread started (pid=1250, tid=2051)
    Dec 23 00:17:36 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 00:17:36 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 00:17:36 linvdr user.notice kernel: em8300: Microcode version 0x29 loaded
    Dec 23 00:17:36 linvdr user.debug vdr[1241]: dxr3: configure: video mode: PAL
    Dec 23 00:17:36 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 00:17:36 linvdr user.debug vdr[1241]: dxr3: configure: audio mode: analog
    Dec 23 00:17:36 linvdr user.debug vdr[1241]: dxr3: intf: brightness=500,contrast=500,saturation=500 at init
    Dec 23 00:17:36 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 00:17:36 linvdr user.info vdr[1241]: initializing plugin: remote (0.3.2): Remote control
    Dec 23 00:17:36 linvdr user.info vdr[1241]: setting primary device to 1
    Dec 23 00:17:36 linvdr user.info vdr[1241]: device 1 has no MPEG decoder
    Dec 23 00:17:36 linvdr user.info vdr[1241]: trying device number 2 instead
    Dec 23 00:17:36 linvdr user.info vdr[1241]: setting primary device to 2
    Dec 23 00:17:36 linvdr user.info vdr[1241]: SVDRP listening on port 2001
    Dec 23 00:17:36 linvdr user.info vdr[1241]: starting plugin: dxr3
    Dec 23 00:17:36 linvdr user.info vdr[1241]: starting plugin: remote
    Dec 23 00:17:36 linvdr user.debug vdr[1251]: DXR3 audio output thread started (pid=1251, tid=3076)
    Dec 23 00:17:36 linvdr user.debug vdr[1252]: DXR3 video output thread started (pid=1252, tid=4101)
    Dec 23 00:17:36 linvdr user.debug vdr[1241]: remote: using '/dev/input/event1'
    Dec 23 00:17:36 linvdr user.debug vdr[1241]: remote-event1: exclusive access granted
    Dec 23 00:17:36 linvdr user.err vdr[1241]: remote-event1: unable to open '/proc/av7110_ir': No such file or directory
    Dec 23 00:17:36 linvdr user.err vdr[1241]: ERROR: /proc/av7110_ir: No such file or directory
    Dec 23 00:17:37 linvdr user.debug kernel: em8300_video.o: Video sync rdptr is stuck at 0x0000dc01, wrptr 0x0000dcfb, left 250
    Dec 23 00:17:37 linvdr user.debug kernel: em8300_video.o: Video sync timeout
    Dec 23 00:17:52 linvdr auth.info sshd[1265]: Could not reverse map address 192.168.168.12.
    Dec 23 00:17:53 linvdr auth.info sshd[1265]: Accepted password for root from 192.168.168.12 port 3854 ssh2
    Dec 23 00:17:53 linvdr auth.info sshd[1265]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
    Dec 23 00:17:53 linvdr auth.info PAM_unix[1265]: (ssh) session opened for user root by (uid=0)
    Dec 23 00:17:53 linvdr auth.err PAM-env[1265]: Unable to open config file: No such file or directory
    Dec 23 00:17:53 linvdr auth.err PAM-env[1266]: Unable to open config file: No such file or directory
    Dec 23 00:18:00 linvdr cron.notice crond[1279]: crond 2.3.2 dillon, started, log level 8


    Die DXR3 Karte ist eine Realmagic Hollywood mit Chip von Sigma Designs


    Vielen Dank im voraus für eure Hilfe!


    besten Gruss,


    Peter

    Zitat

    Original von PeterMones
    Dec 23 00:17:28 linvdr user.info kernel: PCI: Found IRQ 11 for device 0000:00:11.0
    Dec 23 00:17:28 linvdr user.info kernel: PCI: Sharing IRQ 11 with 0000:00:07.2


    geteilte IRQs sind schlecht. Zumindest die DVB- und dxr3-Karte sollten eigene IRQs haben. Check mal mit lspci die Lage und versuche ggf. andere Steckplätze


    Zitat

    Dec 23 00:17:37 linvdr user.debug kernel: em8300_video.o: Video sync rdptr is stuck at 0x0000dc01, wrptr 0x0000dcfb, left 250
    Dec 23 00:17:37 linvdr user.debug kernel: em8300_video.o: Video sync timeout


    das kenne ich, obwohl die eigentliche Ursache mir auch unklar ist. Offenbar hängt sich die dxr3 an einem schlechten Videosignal gleich auf. Stoppe mal vdr

    Code
    /etc/init.d/runvdr stop


    und editiere in /etc/vdr/setup.conf den CurrentChannel
    vdr startet dann mit einem anderen Kanal.
    Und versuche mal, ohne andere Plugins zu starten. Notfalls die setup.conf komplett löschen und vdr mit Standartwerten starten lassen.

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    Einmal editiert, zuletzt von Dr. Seltsam ()

    Ist ja der Hammer die schnelle Rückmeldung, dafür erstmal danke!


    Aaalso:

    > geteilte IRQs sind schlecht. Zumindest die DVB- und dxr3-Karte sollten eigene IRQs haben. Check mal mit lspci die Lage und versuche ggf. andere Steckplätze


    nach Tauschen der Karten:


    lspci
    00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
    00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02)
    00:0d.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 02)
    00:0e.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
    00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24)
    01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)


    editieren, CurrentChannel in /etc/vdr/setup.conf von 1 auf 2, und erneutem Start:



    Dec 23 12:11:08 linvdr user.info kernel: Linux video capture interface: v1.00
    Dec 23 12:11:08 linvdr user.warn kernel: saa7146: register extension 'dvb'.
    Dec 23 12:11:08 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
    Dec 23 12:11:08 linvdr user.warn kernel: saa7146: register extension 'budget_cidvb'.
    Dec 23 12:11:08 linvdr user.info kernel: PCI: Found IRQ 9 for device 0000:00:0e.0
    Dec 23 12:11:08 linvdr user.warn kernel: saa7146: found saa7146 @ mem d0d5c400 (revision 1, irq 9) (0x13c2,0x1011).
    Dec 23 12:11:08 linvdr user.warn kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-T^I PCI).
    Dec 23 12:11:10 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:24:17:e1
    Dec 23 12:11:10 linvdr user.warn kernel: DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
    Dec 23 12:11:10 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
    Dec 23 12:11:11 linvdr user.info vdr[2312]: VDR version 1.3.17 started
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.17
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.3.17
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/setup.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/sources.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/diseqc.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/channels.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/commands.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/reccmds.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/svdrphosts.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/ca.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/remote.conf
    Dec 23 12:11:11 linvdr user.info vdr[2312]: loading /etc/vdr/keymacros.conf
    Dec 23 12:11:11 linvdr user.debug vdr[2312]: probing /dev/dvb/adapter0/frontend0
    Dec 23 12:11:11 linvdr user.info kernel: tda1004x: found firmware revision 0 -- invalid
    Dec 23 12:11:11 linvdr user.info kernel: tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
    Dec 23 12:11:12 linvdr user.info kernel: tda1004x: firmware upload complete
    Dec 23 12:11:12 linvdr user.info kernel: tda1004x: found firmware revision 2c -- ok
    Dec 23 12:11:13 linvdr user.debug vdr[2312]: probing /dev/dvb/adapter1/frontend0
    Dec 23 12:11:13 linvdr user.info vdr[2312]: found 1 video device
    Dec 23 12:11:13 linvdr user.info vdr[2312]: initializing plugin: dxr3 (0.2.4-cvs): Hardware MPEG decoder
    Dec 23 12:11:13 linvdr user.debug vdr[2320]: tuner on device 1 thread started (pid=2320, tid=1026)
    Dec 23 12:11:13 linvdr user.debug vdr[2321]: Section handler thread started (pid=2321, tid=2051)
    Dec 23 12:11:14 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 12:11:14 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 12:11:14 linvdr user.notice kernel: em8300: Microcode version 0x29 loaded
    Dec 23 12:11:14 linvdr user.debug vdr[2312]: dxr3: configure: video mode: PAL
    Dec 23 12:11:14 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 12:11:14 linvdr user.debug vdr[2312]: dxr3: configure: audio mode: analog
    Dec 23 12:11:14 linvdr user.debug vdr[2312]: dxr3: intf: brightness=500,contrast=500,saturation=500 at init
    Dec 23 12:11:14 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 12:11:14 linvdr user.info vdr[2312]: initializing plugin: remote (0.3.2): Remote control
    Dec 23 12:11:14 linvdr user.info vdr[2312]: setting primary device to 1
    Dec 23 12:11:14 linvdr user.info vdr[2312]: device 1 has no MPEG decoder
    Dec 23 12:11:14 linvdr user.info vdr[2312]: trying device number 2 instead
    Dec 23 12:11:14 linvdr user.info vdr[2312]: setting primary device to 2
    Dec 23 12:11:14 linvdr user.info vdr[2312]: SVDRP listening on port 2001
    Dec 23 12:11:14 linvdr user.info vdr[2312]: starting plugin: dxr3
    Dec 23 12:11:14 linvdr user.info vdr[2312]: starting plugin: remote
    Dec 23 12:11:14 linvdr user.debug vdr[2312]: remote: using '/dev/input/event1'
    Dec 23 12:11:14 linvdr user.debug vdr[2312]: remote-event1: exclusive access granted
    Dec 23 12:11:14 linvdr user.err vdr[2312]: remote-event1: unable to open '/proc/av7110_ir': No such file or directory
    Dec 23 12:11:14 linvdr user.err vdr[2312]: ERROR: /proc/av7110_ir: No such file or directory
    Dec 23 12:11:14 linvdr user.debug vdr[2322]: DXR3 audio output thread started (pid=2322, tid=3076)
    Dec 23 12:11:14 linvdr user.debug vdr[2323]: DXR3 video output thread started (pid=2323, tid=4101)
    Dec 23 12:11:15 linvdr user.debug kernel: em8300_video.o: Video sync rdptr is stuck at 0x0000dc01, wrptr 0x0000dcfb, left 250
    Dec 23 12:11:15 linvdr user.debug kernel: em8300_video.o: Video sync timeout


    Leider auch nach löschen der setup.conf keine Verbesserungen.
    hab nur keinen Plan was ich da noch machen könnte außer Karten verdrehen...
    Startup nach löschen der setup.conf:


    Dec 23 12:17:37 linvdr user.info kernel: Linux video capture interface: v1.00
    Dec 23 12:17:38 linvdr user.warn kernel: saa7146: register extension 'dvb'.
    Dec 23 12:17:38 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
    Dec 23 12:17:38 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
    Dec 23 12:17:38 linvdr user.info kernel: PCI: Found IRQ 9 for device 0000:00:0e.0
    Dec 23 12:17:38 linvdr user.warn kernel: saa7146: found saa7146 @ mem d0d5c400 (revision 1, irq 9) (0x13c2,0x1011).
    Dec 23 12:17:38 linvdr user.warn kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-T^I PCI).
    Dec 23 12:17:40 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:24:17:e1
    Dec 23 12:17:40 linvdr user.warn kernel: DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
    Dec 23 12:17:40 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
    Dec 23 12:17:40 linvdr user.info vdr[3416]: VDR version 1.3.17 started
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.17
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.3.17
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/sources.conf
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/diseqc.conf
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/channels.conf
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/commands.conf
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/reccmds.conf
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/svdrphosts.conf
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/ca.conf
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/remote.conf
    Dec 23 12:17:40 linvdr user.info vdr[3416]: loading /etc/vdr/keymacros.conf
    Dec 23 12:17:40 linvdr user.debug vdr[3416]: probing /dev/dvb/adapter0/frontend0
    Dec 23 12:17:40 linvdr user.info kernel: tda1004x: found firmware revision 0 -- invalid
    Dec 23 12:17:40 linvdr user.info kernel: tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
    Dec 23 12:17:41 linvdr user.info kernel: tda1004x: firmware upload complete
    Dec 23 12:17:42 linvdr user.info kernel: tda1004x: found firmware revision 2c -- ok
    Dec 23 12:17:42 linvdr user.debug vdr[3416]: probing /dev/dvb/adapter1/frontend0
    Dec 23 12:17:42 linvdr user.info vdr[3416]: found 1 video device
    Dec 23 12:17:42 linvdr user.info vdr[3416]: initializing plugin: dxr3 (0.2.4-cvs): Hardware MPEG decoder
    Dec 23 12:17:42 linvdr user.debug vdr[3424]: tuner on device 1 thread started (pid=3424, tid=1026)
    Dec 23 12:17:42 linvdr user.debug vdr[3425]: Section handler thread started (pid=3425, tid=2051)
    Dec 23 12:17:43 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 12:17:43 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 12:17:43 linvdr user.notice kernel: em8300: Microcode version 0x29 loaded
    Dec 23 12:17:43 linvdr user.debug vdr[3416]: dxr3: configure: video mode: PAL
    Dec 23 12:17:43 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 12:17:43 linvdr user.debug vdr[3416]: dxr3: configure: audio mode: analog
    Dec 23 12:17:43 linvdr user.debug vdr[3416]: dxr3: intf: brightness=500,contrast=500,saturation=500 at init
    Dec 23 12:17:43 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 12:17:43 linvdr user.info vdr[3416]: initializing plugin: remote (0.3.2): Remote control
    Dec 23 12:17:43 linvdr user.info vdr[3416]: setting primary device to 1
    Dec 23 12:17:43 linvdr user.info vdr[3416]: device 1 has no MPEG decoder
    Dec 23 12:17:43 linvdr user.info vdr[3416]: trying device number 2 instead
    Dec 23 12:17:43 linvdr user.info vdr[3416]: setting primary device to 2
    Dec 23 12:17:43 linvdr user.info vdr[3416]: SVDRP listening on port 2001
    Dec 23 12:17:43 linvdr user.info vdr[3416]: starting plugin: dxr3
    Dec 23 12:17:43 linvdr user.info vdr[3416]: starting plugin: remote
    Dec 23 12:17:43 linvdr user.debug vdr[3416]: remote: using '/dev/input/event1'
    Dec 23 12:17:43 linvdr user.debug vdr[3416]: remote-event1: exclusive access granted
    Dec 23 12:17:43 linvdr user.err vdr[3416]: remote-event1: unable to open '/proc/av7110_ir': No such file or directory
    Dec 23 12:17:43 linvdr user.err vdr[3416]: ERROR: /proc/av7110_ir: No such file or directory
    Dec 23 12:17:43 linvdr user.debug vdr[3426]: DXR3 audio output thread started (pid=3426, tid=3076)
    Dec 23 12:17:43 linvdr user.debug vdr[3427]: DXR3 video output thread started (pid=3427, tid=4101)
    Dec 23 12:17:44 linvdr user.debug kernel: em8300_video.o: Video sync rdptr is stuck at 0x0000dc01, wrptr 0x0000dcfb, left 250
    Dec 23 12:17:44 linvdr user.debug kernel: em8300_video.o: Video sync timeout


    besten Gruss,


    Peter

    bist Du sicher, dass die channels.conf richtig ist, und dass die DVB-T-Karte einen sauberen Empfang hat?


    und nimm bitte erstmal das ganz normale STTNG-Skin. (Skinelchi als Plugin funktioniert auch ganz gut, wenn man alle OSD-intensiven Sachen, insb. Senderlogos, deaktiviert.)

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    Zitat

    Original von PeterMones
    Hallo zusammen,
    ich habe Probleme mit den beiden am 20.12 neu hinzugekommen Dateien: Kernel linvdr-kernel-2.6.14.2-neu.tgz sowie linvdr07_dxr3.tgz,


    lief mein dxr3-Paket früher schon mal bei Dir, d.h. sind die Probleme erst mit den neuen Paketen entstanden?

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    Einmal editiert, zuletzt von Dr. Seltsam ()

    jepp, genau, lief Prima! Ich weiß leider nicht mehr genau was ich da installiert hatte. Das war aber um den 09.09.2005 mit den entsprechend auktuellen Versionen. Irgendwann hat sich dann aber meine Festplatte verabschiedet. Jetzt hab ich hdd frischfleisch drin, aber der Rest will irgendwie nicht so Recht starten...

    uups da waren ja schon zwei antworten...meine Channnels.conf (Raum Köln Bonn)


    ZDF:514000:I0B8C23D23M16T8G4Y0:T:27500:545:546,547;559:551:0:514:0:0:0
    Info/3sat:514000:I0B8C23D23M16T8G4Y0:T:27500:561:562,563:567:0:515:0:0:0
    Doku/KiKa:514000:I0B8C23D23M16T8G4Y0:T:27500:593:594:599:0:517:0:0:0
    RTL Television:538000:I0B8C23D23M16T8G4Y0:T:27500:337:338:343:0:16405:0:0:0
    RTL2:538000:I0B8C23D23M16T8G4Y0:T:27500:353:354:359:0:16406:0:0:0
    Super RTL:538000:I0B8C23D23M16T8G4Y0:T:27500:433:434:439:0:16411:0:0:0
    VOX:538000:I0B8C23D23M16T8G4Y0:T:27500:545:546:551:0:16418:0:0:0
    CNN Int.:594000:I0B8C23D23M16T8G4Y0:T:27500:97:98:103:0:16390:0:0:0
    VIVA:594000:I0B8C23D23M16T8G4Y0:T:27500:513:514:519:0:16416:0:0:0
    Eurosport:594000:I0B8C23D23M16T8G4Y0:T:27500:577:578:583:0:16420:0:0:0
    TERRA NOVA:594000:I0B8C23D23M16T8G4Y0:T:27500:609:610,611:615:0:16422:0:0:0
    KABEL1:650000:I0B8C23D23M16T8G4Y0:T:27500:161:162:167:0:16394:0:0:0
    N24:650000:I0B8C23D23M16T8G4Y0:T:27500:225:226:231:0:16398:0:0:0
    ProSieben:650000:I0B8C23D23M16T8G4Y0:T:27500:305:306;312:311:0:16403:0:0:0
    SAT.1:650000:I0B8C23D23M16T8G4Y0:T:27500:385:386;392:391:0:16408:0:0:0
    WDR Köln:698000:I0B8C23D23M16T8G4Y0:T:27500:4625:4626,4627:4628:0:262:0:0:0
    NDR FS NDS:698000:I0B8C23D23M16T8G4Y0:T:27500:4641:4642:4644:0:129:0:0:0
    SÜDWEST RP:698000:I0B8C23D23M16T8G4Y0:T:27500:4673:4674:4676:0:226:0:0:0
    MDR Fernsehen:698000:I0B8C23D23M16T8G4Y0:T:27500:4657:4658:4660:0:100:0:0:0
    Das Erste:826000:I0B8C23D23M16T8G4Y0:T:27500:4369:4370,4371:4372:0:256:0:0:0
    arte:826000:I0B8C23D23M16T8G4Y0:T:27500:4385:4386,4387:4388:0:2:0:0:0
    Phoenix:826000:I0B8C23D23M16T8G4Y0:T:27500:4401:4402:4404:0:3:0:0:0
    EinsMuXx:826000:I0B8C23D23M16T8G4Y0:T:27500:4417:4418:4372:0:6:0:0:0

    Ich glaube der Empfang ist hier nicht der oberknaller...kann es sein das die aktuelle Version da schwer empfindlich ist? Die Version die ich am laufen hatte war super...reibungsloses Umschalten ohne irgendwelche Probleme...


    Könnten wir den Empfang jetzt irgendwie objektiv bewerten..hatte bei den Plugins mal irgendeins welches da Werte ausspuckte. Die würde ich natürlich sofort posten wenn ich das mit der Konsole hinkriegen würde..

    setze mal CurrentChannel auf andere Frequenzen. 1 und 2 sind ja beide vom ZDF-Paket. Also z.B. 4, 8 oder 12


    um erstmal zu testen, ob die dxr3 richtig läuft, könntest Du auch in /etc/init.d/runvdr im Abschnitt modules den tda1004x rausnehmen. vdr startet dann ohne dvb-Karte (falls das nicht geht, als dummy mal das sky-Plugin aktivieren) so dass Du zumindest ein OSD kriegen solltest.

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    <update>
    auch nach Sky Plugin Aktivierung gleicher Effekt, s.u.
    </update>
    tda1004x rausgenommen, vdr neugestartet gleicher effekt (auch mit dem Channel 5):


    Log:
    Dec 23 14:18:52 linvdr user.info kernel: Linux video capture interface: v1.00
    Dec 23 14:18:53 linvdr user.warn kernel: saa7146: register extension 'dvb'.
    Dec 23 14:18:53 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
    Dec 23 14:18:53 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
    Dec 23 14:18:53 linvdr user.info kernel: PCI: Found IRQ 9 for device 0000:00:0e.0
    Dec 23 14:18:53 linvdr user.warn kernel: saa7146: found saa7146 @ mem d0d6a400 (revision 1, irq 9) (0x13c2,0x1011).
    Dec 23 14:18:53 linvdr user.warn kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-T^I PCI).
    Dec 23 14:18:54 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:24:17:e1
    Dec 23 14:18:55 linvdr user.warn kernel: DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
    Dec 23 14:18:55 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
    Dec 23 14:18:55 linvdr user.info vdr[2098]: VDR version 1.3.17 started
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.17
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.3.17
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/setup.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/sources.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/diseqc.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/channels.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/commands.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/reccmds.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/svdrphosts.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/ca.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/remote.conf
    Dec 23 14:18:55 linvdr user.info vdr[2098]: loading /etc/vdr/keymacros.conf
    Dec 23 14:18:55 linvdr user.debug vdr[2098]: probing /dev/dvb/adapter0/frontend0
    Dec 23 14:18:55 linvdr user.info kernel: tda1004x: found firmware revision 0 -- invalid
    Dec 23 14:18:55 linvdr user.info kernel: tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
    Dec 23 14:18:56 linvdr user.info kernel: tda1004x: firmware upload complete
    Dec 23 14:18:57 linvdr user.info kernel: tda1004x: found firmware revision 2c -- ok
    Dec 23 14:18:57 linvdr user.debug vdr[2106]: tuner on device 1 thread started (pid=2106, tid=1026)
    Dec 23 14:18:57 linvdr user.debug vdr[2098]: probing /dev/dvb/adapter1/frontend0
    Dec 23 14:18:57 linvdr user.info vdr[2098]: found 1 video device
    Dec 23 14:18:57 linvdr user.info vdr[2098]: initializing plugin: dxr3 (0.2.4-cvs): Hardware MPEG decoder
    Dec 23 14:18:57 linvdr user.debug vdr[2107]: Section handler thread started (pid=2107, tid=2051)
    Dec 23 14:18:58 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 14:18:58 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 14:18:58 linvdr user.notice kernel: em8300: Microcode version 0x29 loaded
    Dec 23 14:18:58 linvdr user.debug vdr[2098]: dxr3: configure: video mode: PAL
    Dec 23 14:18:58 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 14:18:58 linvdr user.debug vdr[2098]: dxr3: configure: audio mode: analog
    Dec 23 14:18:58 linvdr user.debug vdr[2098]: dxr3: intf: brightness=500,contrast=500,saturation=500 at init
    Dec 23 14:18:58 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 14:18:58 linvdr user.info vdr[2098]: initializing plugin: remote (0.3.2): Remote control
    Dec 23 14:18:58 linvdr user.info vdr[2098]: setting primary device to 1
    Dec 23 14:18:58 linvdr user.info vdr[2098]: device 1 has no MPEG decoder
    Dec 23 14:18:58 linvdr user.info vdr[2098]: trying device number 2 instead
    Dec 23 14:18:58 linvdr user.info vdr[2098]: setting primary device to 2
    Dec 23 14:18:58 linvdr user.info vdr[2098]: SVDRP listening on port 2001
    Dec 23 14:18:58 linvdr user.info vdr[2098]: starting plugin: dxr3
    Dec 23 14:18:58 linvdr user.info vdr[2098]: starting plugin: remote
    Dec 23 14:18:58 linvdr user.debug vdr[2098]: remote: using '/dev/input/event1'
    Dec 23 14:18:58 linvdr user.debug vdr[2098]: remote-event1: exclusive access granted
    Dec 23 14:18:58 linvdr user.err vdr[2098]: remote-event1: unable to open '/proc/av7110_ir': No such file or directory
    Dec 23 14:18:58 linvdr user.err vdr[2098]: ERROR: /proc/av7110_ir: No such file or directory
    Dec 23 14:18:58 linvdr user.debug vdr[2108]: DXR3 audio output thread started (pid=2108, tid=3076)
    Dec 23 14:18:58 linvdr user.debug vdr[2109]: DXR3 video output thread started (pid=2109, tid=4101)
    Dec 23 14:18:59 linvdr user.debug kernel: em8300_video.o: Video sync rdptr is stuck at 0x0000dc01, wrptr 0x0000dcfb, left 250
    Dec 23 14:18:59 linvdr user.debug kernel: em8300_video.o: Video sync timeout




    Dann sky Plugin aktiviert:
    Dec 23 14:23:07 linvdr user.info kernel: Linux video capture interface: v1.00
    Dec 23 14:23:08 linvdr user.warn kernel: saa7146: register extension 'dvb'.
    Dec 23 14:23:08 linvdr user.warn kernel: saa7146: register extension 'budget dvb'.
    Dec 23 14:23:08 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
    Dec 23 14:23:08 linvdr user.info kernel: PCI: Found IRQ 9 for device 0000:00:0e.0
    Dec 23 14:23:08 linvdr user.warn kernel: saa7146: found saa7146 @ mem d0d6a400 (revision 1, irq 9) (0x13c2,0x1011).
    Dec 23 14:23:08 linvdr user.warn kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-T^I PCI).
    Dec 23 14:23:10 linvdr user.warn kernel: adapter has MAC addr = 00:d0:5c:24:17:e1
    Dec 23 14:23:10 linvdr user.warn kernel: DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
    Dec 23 14:23:10 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
    Dec 23 14:23:10 linvdr user.info vdr[1894]: VDR version 1.3.17 started
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.17
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading plugin: /usr/lib/vdr/plugins/libvdr-sky.so.1.3.17
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.3.17
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/setup.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/sources.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/diseqc.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/channels.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/commands.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/reccmds.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/svdrphosts.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/ca.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/remote.conf
    Dec 23 14:23:10 linvdr user.info vdr[1894]: loading /etc/vdr/keymacros.conf
    Dec 23 14:23:10 linvdr user.debug vdr[1894]: probing /dev/dvb/adapter0/frontend0
    Dec 23 14:23:10 linvdr user.info kernel: tda1004x: found firmware revision 0 -- invalid
    Dec 23 14:23:10 linvdr user.info kernel: tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
    Dec 23 14:23:12 linvdr user.info kernel: tda1004x: firmware upload complete
    Dec 23 14:23:12 linvdr user.info kernel: tda1004x: found firmware revision 2c -- ok
    Dec 23 14:23:13 linvdr user.debug vdr[1902]: tuner on device 1 thread started (pid=1902, tid=1026)
    Dec 23 14:23:13 linvdr user.debug vdr[1894]: probing /dev/dvb/adapter1/frontend0
    Dec 23 14:23:13 linvdr user.info vdr[1894]: found 1 video device
    Dec 23 14:23:13 linvdr user.info vdr[1894]: initializing plugin: dxr3 (0.2.4-cvs): Hardware MPEG decoder
    Dec 23 14:23:13 linvdr user.debug vdr[1903]: Section handler thread started (pid=1903, tid=2051)
    Dec 23 14:23:13 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 14:23:13 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 14:23:13 linvdr user.notice kernel: em8300: Microcode version 0x29 loaded
    Dec 23 14:23:14 linvdr user.debug vdr[1894]: dxr3: configure: video mode: PAL
    Dec 23 14:23:14 linvdr user.notice kernel: adv717x.o: Configuring for PAL
    Dec 23 14:23:14 linvdr user.debug vdr[1894]: dxr3: configure: audio mode: analog
    Dec 23 14:23:14 linvdr user.debug vdr[1894]: dxr3: intf: brightness=500,contrast=500,saturation=500 at init
    Dec 23 14:23:14 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 14:23:14 linvdr user.info vdr[1894]: initializing plugin: sky (0.3.1): Sky Digibox interface
    Dec 23 14:23:14 linvdr user.err vdr[1894]: ERROR (sky.c,94): Connection refused
    Dec 23 14:23:14 linvdr user.info vdr[1894]: initializing plugin: remote (0.3.2): Remote control
    Dec 23 14:23:14 linvdr user.info vdr[1894]: setting primary device to 1
    Dec 23 14:23:14 linvdr user.info vdr[1894]: device 1 has no MPEG decoder
    Dec 23 14:23:14 linvdr user.info vdr[1894]: trying device number 2 instead
    Dec 23 14:23:14 linvdr user.info vdr[1894]: setting primary device to 2
    Dec 23 14:23:14 linvdr user.info vdr[1894]: SVDRP listening on port 2001
    Dec 23 14:23:14 linvdr user.info vdr[1894]: starting plugin: dxr3
    Dec 23 14:23:14 linvdr user.info vdr[1894]: starting plugin: sky
    Dec 23 14:23:14 linvdr user.info vdr[1894]: starting plugin: remote
    Dec 23 14:23:14 linvdr user.debug vdr[1894]: remote: using '/dev/input/event1'
    Dec 23 14:23:14 linvdr user.debug vdr[1894]: remote-event1: exclusive access granted
    Dec 23 14:23:14 linvdr user.err vdr[1894]: remote-event1: unable to open '/proc/av7110_ir': No such file or directory
    Dec 23 14:23:14 linvdr user.err vdr[1894]: ERROR: /proc/av7110_ir: No such file or directory
    Dec 23 14:23:14 linvdr user.debug vdr[1904]: DXR3 audio output thread started (pid=1904, tid=3076)
    Dec 23 14:23:14 linvdr user.debug vdr[1905]: DXR3 video output thread started (pid=1905, tid=4101)
    Dec 23 14:23:15 linvdr user.debug kernel: em8300_video.o: Video sync rdptr is stuck at 0x0000dc01, wrptr 0x0000dcfb, left 250
    Dec 23 14:23:15 linvdr user.debug kernel: em8300_video.o: Video sync timeout



    Ich hoff ich Spam hier mit meinen Log-Auszügen das board nicht zu sehr zu...

    hast Du mal mit anderen Modulparametern (adv717x/em8300) in der rcStart experimentiert?

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    Hab jetzt folgendes gemacht:

    - tda1004x wieder in runvdr aufgenommen
    - das sky Plugin wieder raus


    und dann alle drei Modulkonfigurationen ausprobiert, leider immmer wieder:


    Dec 23 15:48:30 linvdr user.debug kernel: em8300_video.o: Video sync rdptr is stuck at 0x0000dc01, wrptr 0x0000dcfb, left 250
    Dec 23 15:48:30 linvdr user.debug kernel: em8300_video.o: Video sync timeout

    was ist, wenn Du den alten 2.6.14.2 installierst?
    Reste vorher löschen:
    rm -r /lib/modules/2.6.14.2

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    Hallo,


    ich habe auch folgendes Versuch:


    Zitat

    Original von Hyper


    Habe folgendes gemacht:
    linvdr 0.7 installiert
    das DXR plugin installiert
    rcStart angepasst
    gruß hyper


    Als Ergebnis erhalte ich jetzt:
    Dec 23 15:11:55 linvdr user.info vdr[1905]: VDR version 1.3.17 started
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.17
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/setup.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/sources.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/diseqc.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/channels.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/timers.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/commands.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/reccmds.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/svdrphosts.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/ca.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/remote.conf
    Dec 23 15:11:55 linvdr user.info vdr[1905]: loading /etc/vdr/keymacros.conf
    Dec 23 15:11:55 linvdr user.debug vdr[1905]: reading EPG data from /ramdisk/epg.data
    Dec 23 15:11:55 linvdr user.debug vdr[1905]: probing /dev/dvb/adapter0/frontend0
    Dec 23 15:11:55 linvdr user.debug vdr[1905]: probing /dev/dvb/adapter1/frontend0
    Dec 23 15:11:55 linvdr user.debug vdr[1910]: tuner on device 1 thread started (pid=1910, tid=1026)
    Dec 23 15:11:55 linvdr user.debug vdr[1911]: Section handler thread started (pid=1911, tid=2051)
    Dec 23 15:11:55 linvdr user.debug vdr[1905]: probing /dev/dvb/adapter2/frontend0
    Dec 23 15:11:55 linvdr user.info vdr[1905]: found 2 video devices
    Dec 23 15:11:55 linvdr user.info vdr[1905]: initializing plugin: dxr3 (0.2.4-cvs): Hardware MPEG decoder
    Dec 23 15:11:55 linvdr user.debug vdr[1913]: tuner on device 2 thread started (pid=1913, tid=3076)
    Dec 23 15:11:55 linvdr user.debug vdr[1914]: Section handler thread started (pid=1914, tid=4101)
    Dec 23 15:11:59 linvdr user.err vdr[1905]: dxr3: fatal: microcode upload failed: Timer expired
    Dec 23 15:11:59 linvdr user.err kernel: em8300: DICOM Update failed


    Was ist damit gemeint ?


    Gruß,
    Legoracer

    VDR-1.3.36 auf LinVDR0.7
    VDR-1.3.37 auf SuSE 10.0 mit Xine & 2 x Skystar2 2.6d

    Hallo,


    Komponenten:
    1x Creative Labs CT7260 Dxr3
    2x Skystar Rev. 2.6D


    Mit einer Skystar sieht es auch so aus:
    Dec 23 16:20:35 linvdr user.info vdr[1220]: VDR version 1.3.17 started
    Dec 23 16:20:35 linvdr user.info vdr[1220]: loading plugin: /usr/lib/vdr/plugins/libvdr-dxr3.so.1.3.17
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/setup.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/sources.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/diseqc.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/channels.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/timers.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/commands.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/reccmds.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/svdrphosts.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/ca.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/remote.conf
    Dec 23 16:20:36 linvdr user.info vdr[1220]: loading /etc/vdr/keymacros.conf
    Dec 23 16:20:36 linvdr user.debug vdr[1220]: reading EPG data from /ramdisk/epg.data
    Dec 23 16:20:36 linvdr user.debug vdr[1220]: probing /dev/dvb/adapter0/frontend0
    Dec 23 16:20:36 linvdr user.debug vdr[1225]: tuner on device 1 thread started (pid=1225, tid=1026)
    Dec 23 16:20:36 linvdr user.debug vdr[1220]: probing /dev/dvb/adapter1/frontend0
    Dec 23 16:20:36 linvdr user.info vdr[1220]: found 1 video device
    Dec 23 16:20:36 linvdr user.info vdr[1220]: initializing plugin: dxr3 (0.2.4-cvs): Hardware MPEG decoder
    Dec 23 16:20:36 linvdr user.debug vdr[1226]: Section handler thread started (pid=1226, tid=2051)
    Dec 23 16:20:37 linvdr user.notice kernel: em8300_audio.o: Analog audio enabled
    Dec 23 16:20:37 linvdr user.notice kernel: em8300: Microcode version 0x29 loaded
    Dec 23 16:20:39 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:41 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:43 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:45 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:47 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:49 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:51 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:53 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:55 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:57 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:20:58 linvdr auth.info sshd[1228]: Could not reverse map address 192.168.0.25.
    Dec 23 16:20:59 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:21:01 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:21:02 linvdr auth.info sshd[1228]: Accepted password for root from 192.168.0.25 port 2104 ssh2
    Dec 23 16:21:02 linvdr auth.info sshd[1228]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
    Dec 23 16:21:02 linvdr auth.info PAM_unix[1228]: (ssh) session opened for user root by (uid=0)
    Dec 23 16:21:02 linvdr auth.err PAM-env[1228]: Unable to open config file: No such file or directory
    Dec 23 16:21:02 linvdr auth.err PAM-env[1230]: Unable to open config file: No such file or directory
    Dec 23 16:21:03 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:21:04 linvdr cron.notice crond[1242]: crond 2.3.2 dillon, started, log level 8
    Dec 23 16:21:05 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    Dec 23 16:21:08 linvdr user.err vdr[1220]: dxr3: unable to open /dev/em8300_ma-0: Timer expired
    linvdr:~#


    Irgendwelche Ideen ?

    VDR-1.3.36 auf LinVDR0.7
    VDR-1.3.37 auf SuSE 10.0 mit Xine & 2 x Skystar2 2.6d

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden