heißt offline .. connected u TVoff ?
Braucht ihr die DRM ausgabe von meinem nuc10 u 11 auch od reichen die syslogs
ohne ein TV angeschlossen
heißt offline .. connected u TVoff ?
Braucht ihr die DRM ausgabe von meinem nuc10 u 11 auch od reichen die syslogs
ohne ein TV angeschlossen
1 Um die warnings in de Boot-Phase bim NUC11 weg zu bekommen muss in die grub command-line wie beim NUC10
HDMI-A-1 GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=enable splash quiet loglevel=3 snd_hda_intel.dmic_detect=0 video=HDMI-A-1:1920x1080@50D drm.edid_firmware=HDMI-A-1:edid/edid.bin nohz=off nolapic-timer vt.handoff=7"
2 Ohne "-C DP-3" in der softhddrm bekomme ich kein Bild: Siehe
syslog_nuc11_connected_TVon_hdmi1_softhdrm_noC
drm_nuc11_connected_TVon_hdmi1_softhdrm_noC
#-C DP-3
-f
-d :0.0
-a hdmi:CARD=PCH,DEV=0
-p hdmi:CARD=PCH,DEV=0
-c PCM
-g 1920x1080+0+0
-r 50
3 Mit "-C DP-3" hat man ein Bild, aber wenn TVoff vdr restarts (10x) und damit ein Problem bei Aufnahmen: siehe
syslog_nuc11_connected_TVoff_hdmi1_softhdrm_DP-3.txt
drm_nuc11_connected_TVoff_hdmi1_softhdrm_DP-3.txt
Nov 29 22:33:22 BM2LTS64nMC vdr[1740]: FindDevice: open /dev/dri/card0: i915
Nov 29 22:33:22 BM2LTS64nMC vdr: [FindDevice] DRM have 5 connectors, 4 crtcs, 20 encoders
Nov 29 22:33:22 BM2LTS64nMC vdr: Requested Connector not found or not connected
Nov 29 22:33:22 BM2LTS64nMC vdr: VideoInit: FindDevice() failed
Nov 29 22:33:22 BM2LTS64nMC vdr[1740]: Magick: abort due to signal 6 (SIGABRT) "Abort"...
Nov 29 22:33:22 BM2LTS64nMC kernel: [ 15.564913] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "HDMI-A-1"
Wenn du den vdr auf der console manuell startest dann druckt er aus welche Connectoren er findet und welchen Status dafür geliefert wird.
Und der Connector aus dem -C Paramter muss auf dem Status connected stehen damit er ihn akzeptiert. Das sollte auch connected sein wenn der TV ausgeschaltet ist weil das EDID auch im ausgeschalteten Zustand erreichbar ist. Wenn du allerdings ein lokales EDID mitgibst dann könnte das anders sein.
poste bitte einmal die Ausgabe von: ./ausgabe_drm mit DP-4 im Kernel.
Am besten einmal ein route66 damit auch die edit.bin sauber neu erstellt wird (TV Gerät muß eingeschaltet sein)
!!!!!!!!!!!!!! jojo61 cinfo erstmal herzlichen Dank, dass ihr uns weiter unterstützt !!!!!!!!!!!!!!!!!!!!!
cinfo, das mit DP-4 mach ich ca.1730
- ad Vorschlag vdr v. Console: Wie lautet bitte die Befehlszeile zum Start des vdr v. console
-ich hab mir mal per die Unterschiede der logs angesehen:
NUC10: (im grub steht immer HDMI-A-1)
Wenn der TV abgesteckt ist (*** Output DRM-Card *** DP-1: disconnected DP-2: disconnected HDMI-A-1: connected)
ifehlen die Kernel events, die offens. den HDMI Schaltkreis (der ja vom NUC auch bei ausgeschaltenem TV gepseist wird) erkennen.
Nov 29 19:20:57 BM2LTS64nMC kernel: [ 9.384499] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "HDMI-A-1"
Nov 29 19:20:57 BM2LTS64nMC vdr: Requested Connector not found or not connected
Wenn der TV angesteckt (egal ob TVon/off) ist (DP-1: connected DP-2: disconnected HDMI-A-1: connected)
kommen diese Events:
Nov 29 19:29:28 BM2LTS64nMC kernel: [ 10.130940] evbug: Event. Dev: input7, Type: 5, Code: 6, Value: 0
HDMI connected TVoff: vdr OK
Nov 29 19:29:27 BM2LTS64nMC vdr: [FindDevice] DRM have 3 connectors, 3 crtcs, 8 encoders
Nov 29 19:29:28 BM2LTS64nMC systemd[1]: dmesg.service: Deactivated successfully.
Nov 29 19:29:28 BM2LTS64nMC kernel: [ 10.130940] evbug: Event. Dev: input7, Type: 5, Code: 6, Value: 0
Nov 29 19:29:28 BM2LTS64nMC kernel: [ 10.130946] evbug: Event. Dev: input7, Type: 5, Code: 8, Value: 0
Nov 29 19:29:28 BM2LTS64nMC kernel: [ 10.130948] evbug: Event. Dev: input7, Type: 0, Code: 0, Value: 0
Nov 29 19:29:28 BM2LTS64nMC acpid: received input layer event "jack/lineout LINEOUT unplug"
Nov 29 19:29:28 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 19:29:28 BM2LTS64nMC acpid: completed input layer event "jack/lineout LINEOUT unplug"
Nov 29 19:29:28 BM2LTS64nMC acpid: received input layer event "jack/videoout VIDEOOUT unplug"
Nov 29 19:29:28 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 19:29:28 BM2LTS64nMC acpid: completed input layer event "jack/videoout VIDEOOUT unplug"
Nov 29 19:29:28 BM2LTS64nMC acpid: received input layer event "jack/lineout LINEOUT plug"
Nov 29 19:29:28 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 19:29:28 BM2LTS64nMC acpid: completed input layer event "jack/lineout LINEOUT plug"
Nov 29 19:29:28 BM2LTS64nMC acpid: received input layer event "jack/videoout VIDEOOUT plug"
Nov 29 19:29:28 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 19:29:28 BM2LTS64nMC acpid: completed input layer event "jack/videoout VIDEOOUT plug"
Nov 29 19:29:28 BM2LTS64nMC kernel: [ 10.253212] evbug: Event. Dev: input7, Type: 5, Code: 6, Value: 1
Nov 29 19:29:28 BM2LTS64nMC kernel: [ 10.253224] evbug: Event. Dev: input7, Type: 5, Code: 8, Value: 1
Nov 29 19:29:28 BM2LTS64nMC kernel: [ 10.253229] evbug: Event. Dev: input7, Type: 0, Code: 0, Value: 0
Nov 29 19:29:28 BM2LTS64nMC vdr: Trying to create Desktop OpenGL context
Nov 29 19:29:28 BM2LTS64nMC vdr: Use 460 GLVersion
Alles anzeigen
HDMI disconnected:
Nov 29 19:20:57 BM2LTS64nMC vdr: [FindDevice] DRM have 3 connectors, 3 crtcs, 8 encoders
Nov 29 19:20:57 BM2LTS64nMC kernel: [ 9.384499] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "HDMI-A-1"
Nov 29 19:20:57 BM2LTS64nMC vdr: Requested Connector not found or not connected
Nov 29 19:20:57 BM2LTS64nMC vdr: VideoInit: FindDevice() failed
Nov 29 19:20:57 BM2LTS64nMC vdr[1526]: Magick: abort due to signal 6 (SIGABRT) "Abort"...
Nov 29 19:20:58 BM2LTS64nMC systemd[1]: vdr.service: Main process exited, code=killed, status=6/ABRT
Nov 29 19:20:58 BM2LTS64nMC systemd[1]: vdr.service: Failed with result 'signal'.
Nov 29 19:20:58 BM2LTS64nMC systemd[1]: Failed to start Video Disk Recorder.
NUC11:
Es ist egal ob der TV abgesteckt oder angesteckt und OFF ist.
( HMDI-A-1 im grub DP-1: disconnected DP-2: disconnected DP-3: disconnected DP-4: disconnected HDMI-A-1: connected)
(DP-3 im grub: DP-1: disconnected DP-2: disconnected DP-3: connected DP-4: disconnected HDMI-A-1: disconnected
Es fehlen in beiden Fällen die Kernel events, die offens. den HDMI Schaltkreis (der ja vom NUC auch bei ausgeschltenem TV gepseist wird) erkennen.
Nov 29 22:51:54 BM2LTS64nMC kernel: [ 11.744560] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "HDMI-A-1"
Nov 29 22:41:27 BM2LTS64nMC vdr: [FindDevice] DRM have 5 connectors, 4 crtcs, 20 encoders
Nov 29 22:41:27 BM2LTS64nMC vdr: Requested Connector not found or not connected
Nov 29 22:41:27 BM2LTS64nMC vdr[1399]: Magick: abort due to signal 6 (SIGABRT) "Abort"...
Nur wenn der TV ON ist, HDMI-A-1 im grub und softhddrm -C DP-3 wird der HDMI erkannt und es kommen diese Events:
Nov 29 22:51:54 BM2LTS64nMC acpid: received input layer event "jack/lineout LINEOUT unplug"
Nov 29 22:51:54 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 22:51:54 BM2LTS64nMC acpid: completed input layer event "jack/lineout LINEOUT unplug"
HDMI connected TVon: vdr und Bild nur OK, wenn HDMI-A-1 im grub und softhddrm -C DP-3
(HDMI-A-1 im grub: DP-1: disconnected DP-2: disconnected DP-3: connected DP-4: disconnected HDMI-A-1: connected)
(dp-3 im grub: Warnings während boot: DP-1: disconnected DP-2: disconnected DP-3: connected DP-4: disconnected HDMI-A-1: disconnected
Nov 29 22:51:54 BM2LTS64nMC kernel: [ 11.744560] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "HDMI-A-1"
Nov 29 22:51:54 BM2LTS64nMC acpid: received input layer event "jack/lineout LINEOUT unplug"
Nov 29 22:51:54 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 22:51:54 BM2LTS64nMC acpid: completed input layer event "jack/lineout LINEOUT unplug"
Nov 29 22:51:54 BM2LTS64nMC acpid: received input layer event "jack/videoout VIDEOOUT unplug"
Nov 29 22:51:54 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 22:51:54 BM2LTS64nMC acpid: completed input layer event "jack/videoout VIDEOOUT unplug"
Nov 29 22:51:54 BM2LTS64nMC kernel: [ 11.908762] evbug: Event. Dev: input7, Type: 5, Code: 6, Value: 0
Nov 29 22:51:54 BM2LTS64nMC kernel: [ 11.908769] evbug: Event. Dev: input7, Type: 5, Code: 8, Value: 0
Nov 29 22:51:54 BM2LTS64nMC kernel: [ 11.908771] evbug: Event. Dev: input7, Type: 0, Code: 0, Value: 0
Nov 29 22:51:54 BM2LTS64nMC kernel: [ 11.931338] evbug: Event. Dev: input7, Type: 5, Code: 6, Value: 1
Nov 29 22:51:54 BM2LTS64nMC kernel: [ 11.931347] evbug: Event. Dev: input7, Type: 5, Code: 8, Value: 1
Nov 29 22:51:54 BM2LTS64nMC kernel: [ 11.931351] evbug: Event. Dev: input7, Type: 0, Code: 0, Value: 0
Nov 29 22:51:54 BM2LTS64nMC acpid: received input layer event "jack/lineout LINEOUT plug"
Nov 29 22:51:54 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 22:51:54 BM2LTS64nMC acpid: completed input layer event "jack/lineout LINEOUT plug"
Nov 29 22:51:54 BM2LTS64nMC acpid: received input layer event "jack/videoout VIDEOOUT plug"
Nov 29 22:51:54 BM2LTS64nMC acpid: 0 total rules matched
Nov 29 22:51:54 BM2LTS64nMC acpid: completed input layer event "jack/videoout VIDEOOUT plug"
Nov 29 22:51:54 BM2LTS64nMC vdr: Trying to create Desktop OpenGL context
Nov 29 22:51:54 BM2LTS64nMC vdr: Use 460 GLVersion
Alles anzeigen
HDMI disconnected oder TVoff oder im grub nicht HDMI-A-1:
Nov 29 22:41:27 BM2LTS64nMC vdr[1399]: FindDevice: open /dev/dri/card0: i915
Nov 29 22:41:27 BM2LTS64nMC vdr: [FindDevice] DRM have 5 connectors, 4 crtcs, 20 encoders
Nov 29 22:41:27 BM2LTS64nMC vdr: Requested Connector not found or not connected
Nov 29 22:41:27 BM2LTS64nMC vdr[1399]: Magick: abort due to signal 6 (SIGABRT) "Abort"...
Got external EDID base block and 1 extension from "edid/edid.bin" for connector "HDMI-A-1
Das sieht nach einem gefakten EDID aus. Warum mach ihr das ?
Ich kenne eure Umgebung nicht, aber der vdr auf der console sollte einfach mit "vdr" startbar sein. Vorher evtl. noch ein "killall vdr" um den laufenden vdr abzubrechen. Alles als root natürlich.
Das sieht nach einem gefakten EDID aus. Warum mach ihr das ?
Nein wird nicht genutzt. EDID wir immer aktuell neu erstellt, bei der Einrichtung von BM2LTS (route66)
Hi,
Vdr von Konsole dürfte auch bei BM2LTS via runvdr gehen, vermute ich.
MfG Stefan
Hi,
Vdr von Konsole dürfte auch bei BM2LTS via runvdr gehen, vermute ich.
MfG Stefan
richtig oder einfach service vdr start
Wenn es als service gestartet wird dann sieht man aber die Debug prints nicht. Es sollte schon direkt auf der Konsole laufen.
Nein wird nicht genutzt. EDID wir immer aktuell neu erstellt, bei der Einrichtung von BM2LTS (route66)
Dann kann man es doch weglassen. Das EDID wird doch immer aktuell gelesen wenn ich das softhddrm starte. Damit wird dann auch gleich geschaut ob der TV angeklemmt ist.
cinfo (DP-4 = DP1,2 bringt nichts)
Ich habe die grub commandline mal ganz ohne video= und edid Vorgaben versucht.
Zusätzlich habe ich in der softhddrm.conf das -C weg gelassen und -p und -a hdmi:CARD=PCH,DEV=0.
NUC11 TV angeschlossen und EIN: Bild+Ton OK
DP-1: disconnected DP-2: disconnected DP-3: connected DP-4: disconnected HDMI-A-1: disconnected
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.475336] i915 0000:00:02.0: vgaarb: deactivate vga console
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.475421] i915 0000:00:02.0: [drm] Using Transparent Hugepages
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.477002] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.477931] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.595387] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.804778] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.810086] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.812148] acpi device:48: registered as cooling_device7
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.813104] acpi device:49: registered as cooling_device8
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.813357] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.838817] fbcon: i915drmfb (fb0) is primary device
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.934475] Console: switching to colour frame buffer device 240x67
Nov 30 17:23:00 BM2LTS64nMC kernel: [ 2.954630] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
Alles anzeigen
Nov 30 17:23:07 BM2LTS64nMC vdr[1445]: FindDevice: open /dev/dri/card0: i915
Nov 30 17:23:07 BM2LTS64nMC vdr: [FindDevice] DRM have 5 connectors, 4 crtcs, 20 encoders
Nov 30 17:23:07 BM2LTS64nMC vdr: Trying to create Desktop OpenGL context
Nov 30 17:23:07 BM2LTS64nMC vdr: Use 460 GLVersion
[ 1.808090] ACPI: bus type drm_connector registered
[ 2.474653] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 2.475421] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 2.477931] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[ 2.595387] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[ 2.804778] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.838817] fbcon: i915drmfb (fb0) is primary device
[ 2.954630] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 4.084877] systemd[1]: Starting Load Kernel Module drm...
[ 4.099850] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 4.099998] systemd[1]: Finished Load Kernel Module drm.
Alles anzeigen
NUC11 TV angeschlossen und AUS: vdr crash
DP-1: disconnected DP-2: disconnected DP-3: disconnected DP-4: disconnected HDMI-A-1: disconnected
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.420313] i915 0000:00:02.0: vgaarb: deactivate vga console
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.420351] i915 0000:00:02.0: [drm] Using Transparent Hugepages
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.421945] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.422848] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.534454] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.535255] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.537091] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.537731] acpi device:48: registered as cooling_device7
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.538060] acpi device:49: registered as cooling_device8
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.538152] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.539330] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
Nov 30 17:31:26 BM2LTS64nMC kernel: [ 2.539915] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
Alles anzeigen
Nov 30 17:31:34 BM2LTS64nMC vdr[1732]: FindDevice: open /dev/dri/card0: i915
Nov 30 17:31:34 BM2LTS64nMC vdr: [FindDevice] DRM have 5 connectors, 4 crtcs, 20 encoders
Nov 30 17:31:34 BM2LTS64nMC vdr: Requested Connector not found or not connected
Nov 30 17:31:34 BM2LTS64nMC vdr: VideoInit: FindDevice() failed
Nov 30 17:31:34 BM2LTS64nMC vdr[1732]: Magick: abort due to signal 6 (SIGABRT) "Abort"...
[ 1.802662] ACPI: bus type drm_connector registered
[ 2.420283] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 2.420351] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 2.422848] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[ 2.534454] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[ 2.535255] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.539330] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 2.539915] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 4.563440] systemd[1]: Starting Load Kernel Module drm...
[ 4.586993] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 4.587143] systemd[1]: Finished Load Kernel Module drm.
Alles anzeigen
Resümee:
- Ohne dass der TV ein ist findet der NUC11 kernel keinen Connector
- Ohne Connector crashed der vdr
Gebe ich im grub DP-3 vor video=DP-3:1920x1080@50D
kernel: [ 2.179554] i915 0000:00:02.0: drm_WARN_ON(aux_powered)
kernel: [ 2.179565] WARNING: CPU: 3 PID: 9 at drivers/gpu/drm/i915/display/intel_tc.c:636 intel_tc_port_update_mode+0x238/0x2c0 [i915]
kernel: [ 2.179671] CPU: 3 PID: 9 Comm: kworker/u8:0 Not tainted 6.0.6-060006-generic #202210290932
kernel: [ 2.179673] Hardware name: Intel(R) Client Systems NUC11PAHi3/NUC11PABi3, BIOS PATGL357.0041.2021.0811.1505 08/11/2021
kernel: [ 2.179674] Workqueue: events_unbound async_run_entry_fn
kernel: [ 2.179678] RIP: 0010:intel_tc_port_update_mode+0x238/0x2c0 [i915]
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.169201] [drm] forcing DP-3 connector on
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.174069] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.174886] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.176592] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.177202] acpi device:48: registered as cooling_device7
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.177488] acpi device:49: registered as cooling_device8
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.177567] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.179553] ------------[ cut here ]------------
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.179554] i915 0000:00:02.0: drm_WARN_ON(aux_powered)
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.179565] WARNING: CPU: 3 PID: 9 at drivers/gpu/drm/i915/display/intel_tc.c:636 intel_tc_port_update_mode+0x238/0x2c0 [i915]
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.179653] Modules linked in: i915 i2c_algo_bit drm_buddy ttm drm_display_helper cec rc_core crct10dif_pclmul drm_kms_helper crc32_pclmul nvme intel_lpss_pci polyval_clmulni syscopyarea polyval_generic ghash_clmulni_intel aesni_intel crypto_simd xhci_pci sysfillrect intel_lpss sysimgblt fb_sys_fops i2c_i801 nvme_core ahci spi_intel_pci cryptd igc drm i2c_smbus spi_intel libahci idma64 xhci_pci_renesas nvme_common wmi video pinctrl_tigerlake
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.179671] CPU: 3 PID: 9 Comm: kworker/u8:0 Not tainted 6.0.6-060006-generic #202210290932
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.179673] Hardware name: Intel(R) Client Systems NUC11PAHi3/NUC11PABi3, BIOS PATGL357.0041.2021.0811.1505 08/11/2021
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.179674] Workqueue: events_unbound async_run_entry_fn
Nov 30 18:13:43 BM2LTS64nMC kernel: [ 2.179678] RIP: 0010:intel_tc_port_update_mode+0x238/0x2c0 [i915]
Alles anzeigen
gibt doch mal den NUC 11 das aktuelle BIOS -- Deins ist ja schon mehr als ein Jahr alt (BIOS PATGL357.0041.2021.0811.1505 08/11/2021)
Dann mach doch bitte einmal ein route66 damit der Grub (DP_4) und edid.bin neu geschrieben werden (mit angeschlossenem TV Gerät)
Poste dann mal die Ausgabe von ./ausgabe_drm
Die Meldung gibt es hier überhaupt nicht
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 1.848384] i915 0000:00:02.0: [drm] VT-d active for gfx access
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 1.848455] i915 0000:00:02.0: vgaarb: deactivate vga console
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 1.848503] i915 0000:00:02.0: [drm] Using Transparent Hugepages
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 1.849573] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 1.850090] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 1.980179] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 2.118385] fbcon: i915drmfb (fb0) is primary device
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 2.118385] fbcon: i915drmfb (fb0) is primary device
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 2.118387] fbcon: Deferring console take-over
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 2.118389] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 4.051267] mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_o>
Nov 29 20:03:18 BM2LTS64nDD kernel: [ 4.051506] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops>
Nov 29 20:03:30 BM2LTS64nDD vdr[1489]: FindDevice: open /dev/dri/card0: i915
Nov 29 20:03:30 BM2LTS64nDD vdr: [FindDevice] DRM have 7 connectors, 4 crtcs, 16 encoders
...
Alles anzeigen
Ja weil es ev. ein 11i3 und nicht 11i5 Prob ist, Bios auf 48 aktualisiert,
route66:
256-byte EDID successfully retrieved from i2c bus 13
Looks like i2c was successful. Have a good day.
Adding boot menu entry for UEFI Firmware Settings ...
done
[ 1.956090] drm_do_probe_ddc_edid+0xbe/0x140 [drm]
[ 1.956111] ? drm_edid_duplicate+0x30/0x30 [drm]
[ 1.956125] edid_block_read+0x3e/0xe0 [drm]
[ 1.956138] ? drm_edid_duplicate+0x30/0x30 [drm]
[ 1.956151] _drm_do_get_edid+0xbc/0x290 [drm]
[ 1.956163] ? drm_edid_duplicate+0x30/0x30 [drm]
[ 1.956176] drm_get_edid+0x46/0xa0 [drm]
[ 1.956188] intel_dp_set_edid+0x2a2/0x2c0 [i915]
[ 1.957244] drm_do_probe_ddc_edid+0xbe/0x140 [drm]
[ 1.957261] ? drm_edid_duplicate+0x30/0x30 [drm]
...
Alles anzeigen
grub schaut nach route66 wieder initial aus:
GRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=enable splash quiet loglevel=3 snd_hda_intel.dmic_detect=0 video=DP-4:1920x1080@50D drm.edid_firmware=DP-4:edid/edid.bin nohz=off nolapic-timer vt.handoff=7"
Intel Treiber Warnings unverändert:
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.941013] [drm] forcing DP-4 connector on
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.942763] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.943679] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.944785] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.945374] acpi device:48: registered as cooling_device7
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.945668] acpi device:49: registered as cooling_device8
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.945754] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.947259] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "DP-4"
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.947309] ------------[ cut here ]------------
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.947310] i915 0000:00:02.0: drm_WARN_ON(aux_powered)
Nov 30 19:54:53 BM2LTS64nMC kernel: [ 1.947324] WARNING: CPU: 1 PID: 44 at drivers/gpu/drm/i915/display/intel_tc.c:636 intel_tc_port_update_mode+0x238/0x2c0 [i915]
Alles anzeigen
DRM:
DP-1: disconnected
DP-2: disconnected
DP-3: disconnected
DP-4: connected
HDMI-A-1: disconnected
*************************
*** Output DRM-System ***
*************************
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.0.6-060006-generic root=UUID=a48865c1-45b7-4ba7-b12b-674e46d0738d ro net.ifnames=0 and biosdevname=0 intel_pstate=enable splash quiet loglevel=3 snd_hda_intel.dmic_detect=0 video=DP-4:1920x1080@50D drm.edid_firmware=DP-4:edid/edid.bin nohz=off nolapic-timer vt.handoff=7
[ 0.041842] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.6-060006-generic root=UUID=a48865c1-45b7-4ba7-b12b-674e46d0738d ro net.ifnames=0 and biosdevname=0 intel_pstate=enable splash quiet loglevel=3 snd_hda_intel.dmic_detect=0 video=DP-4:1920x1080@50D drm.edid_firmware=DP-4:edid/edid.bin nohz=off nolapic-timer vt.handoff=7
[ 1.319694] ACPI: bus type drm_connector registered
[ 1.939032] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 1.940156] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[ 1.941013] [drm] forcing DP-4 connector on
[ 1.942763] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[ 1.943679] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 1.947259] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "DP-4"
[ 1.947310] i915 0000:00:02.0: drm_WARN_ON(aux_powered)
[ 1.947324] WARNING: CPU: 1 PID: 44 at drivers/gpu/drm/i915/display/intel_tc.c:636 intel_tc_port_update_mode+0x238/0x2c0 [i915]
[ 1.947456] Modules linked in: i915 i2c_algo_bit drm_buddy ttm drm_display_helper cec rc_core drm_kms_helper syscopyarea sysfillrect crct10dif_pclmul sysimgblt fb_sys_fops crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel aesni_intel crypto_simd nvme cryptd igc i2c_i801 spi_intel_pci drm spi_intel i2c_smbus ahci libahci nvme_core intel_lpss_pci intel_lpss xhci_pci idma64 xhci_pci_renesas nvme_common wmi video pinctrl_tigerlake
[ 1.947723] ? drm_connector_set_tile_property+0x163/0x170 [drm]
[ 1.947813] drm_dp_dpcd_access+0xad/0x140 [drm_display_helper]
[ 1.947821] drm_dp_dpcd_probe+0x41/0x100 [drm_display_helper]
[ 1.947826] drm_dp_dpcd_read+0xe7/0x130 [drm_display_helper]
[ 1.947935] drm_helper_probe_single_connector_modes+0x121/0x5f0 [drm_kms_helper]
[ 1.947946] drm_client_modeset_probe+0x203/0x5e0 [drm]
[ 1.947964] __drm_fb_helper_initial_config_and_unlock+0x36/0xe0 [drm_kms_helper]
[ 1.947970] drm_fb_helper_initial_config+0x45/0x60 [drm_kms_helper]
[ 2.617320] i915 0000:00:02.0: [drm] *ERROR* Failed to read DPCD register 0x92
[ 3.285268] i915 0000:00:02.0: [drm] User-defined mode not supported: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x60 0x5
[ 3.285912] fbcon: i915drmfb (fb0) is primary device
[ 3.285915] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 3.306424] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "DP-4"
[ 4.445293] i915 0000:00:02.0: [drm] *ERROR* Failed to read DPCD register 0x92
[ 5.113664] i915 0000:00:02.0: [drm] User-defined mode not supported: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x60 0x5
[ 7.793678] i915 0000:00:02.0: [drm] *ERROR* [ENCODER:344:DDI TC4/PHY TC4][DPRX] Failed to enable link training
[ 7.793992] i915 0000:00:02.0: [drm] *ERROR* Link Training Unsuccessful
[ 8.506508] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "DP-4"
[ 9.174188] i915 0000:00:02.0: [drm] *ERROR* Failed to read DPCD register 0x92
[ 9.841876] i915 0000:00:02.0: [drm] User-defined mode not supported: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x60 0x5
[ 10.359115] systemd[1]: Starting Load Kernel Module drm...
[ 10.386311] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 10.386490] systemd[1]: Finished Load Kernel Module drm.
[ 17.782339] [drm] Got external EDID base block and 1 extension from "edid/edid.bin" for connector "DP-4"
[ 18.450323] i915 0000:00:02.0: [drm] *ERROR* Failed to read DPCD register 0x92
[ 19.118240] i915 0000:00:02.0: [drm] User-defined mode not supported: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x60 0x5
[ 36.394329] i915 0000:00:02.0: [drm] *ERROR* [ENCODER:344:DDI TC4/PHY TC4][DPRX] Failed to enable link training
[ 36.394674] i915 0000:00:02.0: [drm] *ERROR* Link Training Unsuccessful
Alles anzeigen
Ich glaube vorerst einen Workaround gefunden zu haben ... ich habe mal im setup.conf den bei mir stets aktive vdr Notausstieg deaktiviert.
Aktuell ist es so, dass ohne RVon der vdr nicht mehr rebootet und man nachdem man den TV einschaltet halt per FBD den vdr neustarten muss um ein Bild zu bekommen.
Ich werde nun mal einen Timeraufnahme probieren.
ok setze einmal in den Grub DP-3 ein poste bitte die Ausgabe zum DRM noch einmal. Wenn dann alles passt erstelle mal von Mainboard die Kennung damit ich es in der nächsten Version hinterlegen kann
root@BM2LTS64nDD:~# ausgabe_drm
***********************
*** Output DRM-Card ***
***********************
DP-1: disconnected
DP-2: disconnected
DP-3: disconnected
HDMI-A-1: connected
HDMI-A-2: disconnected
HDMI-A-3: disconnected
HDMI-A-4: disconnected
*************************
*** Output DRM-System ***
*************************
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.0.9-060009-generic root=UUID=a48865c1-45b7-4ba7-b12b-674e46d0738d ro net.ifnames=0 and biosdevname=0 intel_pstate=enable splash quiet loglevel=3 snd_hda_intel.dmic_detect=0 video=DP-4:1920x1080@50D drm.edid_firmware=DP-4:edid/edid.bin nohz=off nolapic-timer vt.handoff=7
[ 0.040791] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.0.9-060009-generic root=UUID=a48865c1-45b7-4ba7-b12b-674e46d0738d ro net.ifnames=0 and biosdevname=0 intel_pstate=enable splash quiet loglevel=3 snd_hda_intel.dmic_detect=0 video=DP-4:1920x1080@50D drm.edid_firmware=DP-4:edid/edid.bin nohz=off nolapic-timer vt.handoff=7
[ 1.318953] ACPI: bus type drm_connector registered
[ 1.825823] i915 0000:00:02.0: [drm] VT-d active for gfx access
[ 1.825944] i915 0000:00:02.0: [drm] Using Transparent Hugepages
[ 1.828137] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/tgl_dmc_ver2_12.bin (v2.12)
[ 1.947490] i915 0000:00:02.0: [drm] Protected Xe Path (PXP) protected content support initialized
[ 1.957949] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.054215] fbcon: i915drmfb (fb0) is primary device
[ 2.054219] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 3.701212] systemd[1]: Starting Load Kernel Module drm...
[ 3.712734] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 3.712842] systemd[1]: Finished Load Kernel Module drm.
Alles anzeigen
device-id-find
00:1f.3 Audio device [0403]: Intel Corporation Tiger Lake-LP Smart Sound Technology Audio Controller [8086:a0c8] (rev 30)
80869a14
System: Host: BM2LTS64nDD Kernel: 6.0.9-060009-generic x86_64 bits: 64 Console: tty 1
Distro: Ubuntu 22.04.1 LTS
CPU: Quad core 11th Gen Intel Core i5-1155G7 (-MT-MCP-) arch: N/A cache: 8192 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 19968
clock speeds: min/max: 400/4500 MHz 1: 2972 MHz 2: 4125 MHz 3: 3765 MHz 4: 4149 MHz 5: 1514 MHz
6: 2762 MHz 7: 3205 MHz 8: 2177 MHz
Graphics: Card: Intel TigerLake-LP GT2 [Iris Xe Graphics] bus-ID: 00:02.0 chip-ID: 8086:9a49
Display Server: tty (X.org 1.21.1.3 ) drivers: modesetting (unloaded: intel)
Alles anzeigen
i915 0000:00:02.0: drm_WARN_ON(aux_powered) Da bist Du nicht der Einzige
Vieeleicht sollte man den vdr detached hochfahren und erst wenn das TV eingeschaltet wird dann attachen.
cinfo: Mainboardkennung mach ich am Abend:
1 jojo61 wie könnten wir denn unser Deinterlacerprob weiter eingrenzen
Zitatcinfo schrieb: damit erhalte ich kein Bild aus softhddrm
jojo schrieb: Da würde mich mal das Log interessieren.
2 Könntest du einen aktulisierten Kernel z.V. stellen der ev. den Letztstand dieser Patches beinhaltet:
https://lore.kernel.org/all/?q=intel_tc.c
https://lore.kernel.org/all/?q=intel_tc_port_update_mode
https://lore.kernel.org/all/?q=drm_WARN_ON
Ich vermute das wäre 6.1-rc..... oder ein 6.2er falls überhaupt schon vorhanden
(3 Die Idee mit dem attach ist verm. komplex od. gibts da was, das ich testen beitragen kann ?)
wie könnten wir denn unser Deinterlacerprob weiter eingrenzen
Da warte ich noch auf das Log von der Version mit den "richtigen" avlibs.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!