lircd2uinput 100% CPU load
-
-
-
Please provide more information (syslog, dmesg). I do not see any lirc device in your hardware signature. I have seen something similar to this here: Erfahrungsbericht Zotac H77-ITX WiFi C Series (H77ITX-C-E), Mini-ITX, GT620 onboard - unfortunately there has been no reply if and how the problem has been solved.
-
ct 28 19:31:32 vs lircd2uinput: uinput.KEY_0
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_1
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_102ND
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_10CHANNELSDOWN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_10CHANNELSUP
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_2
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_3
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_4
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_5
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_6
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_7
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_8
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_9
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_A
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_AB
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_ADDRESSBOOK
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_AGAIN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_ALTERASE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_ANGLE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_APOSTROPHE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_ARCHIVE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_AUDIO
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_AUX
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_B
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BACK
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BACKSLASH
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BACKSPACE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BASSBOOST
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BATTERY
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BLUE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BLUETOOTH
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BOOKMARKS
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BREAK
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRIGHTNESSDOWN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRIGHTNESSUP
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRIGHTNESS_CYCLE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRIGHTNESS_ZERO
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT1
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT10
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT2
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT3
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT4
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT5
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT6
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT7
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT8
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_BRL_DOT9
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_C
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CALC
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CALENDAR
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAMERA
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAMERA_DOWN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAMERA_FOCUS
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAMERA_LEFT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAMERA_RIGHT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAMERA_UP
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAMERA_ZOOMIN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAMERA_ZOOMOUT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CANCEL
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CAPSLOCK
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CHANNEL
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CHANNELDOWN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CHANNELUP
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CHAT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CLEAR
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CLOSE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CLOSECD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_COFFEE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_COMMA
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_COMPOSE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_COMPUTER
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CONFIG
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CONNECT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CONTEXT_MENU
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_COPY
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CUT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_CYCLEWINDOWS
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_D
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DASHBOARD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DATABASE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DELETE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DELETEFILE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DEL_EOL
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DEL_EOS
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DEL_LINE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DIGITS
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DIRECTION
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DIRECTORY
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DISPLAYTOGGLE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DISPLAY_OFF
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DOCUMENTS
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DOLLAR
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DOT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DOWN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_DVD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_E
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EDIT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EDITOR
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EJECTCD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EJECTCLOSECD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EMAIL
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_END
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_ENTER
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EPG
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EQUAL
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_ESC
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EURO
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_EXIT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F1
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F10
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F11
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F12
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F13
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F14
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F15
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F16
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F17
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F18
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F19
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F2
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F20
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F21
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F22
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F23
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F24
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F3
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F4
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F5
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F6
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F7
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F8
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_F9
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FASTFORWARD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FAVORITES
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FILE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FINANCE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FIND
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FIRST
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_1
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_2
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_B
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_D
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_E
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_ESC
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F1
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F10
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F11
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F12
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F2
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F3
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F4
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F5
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F6
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F7
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F8
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_F9
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FN_S
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FORWARD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FORWARDMAIL
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FRAMEBACK
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FRAMEFORWARD
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_FRONT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_G
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_GAMES
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_GOTO
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_GRAPHICSEDITOR
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_GRAVE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_GREEN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_H
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_HANGEUL
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_HANJA
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_HELP
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_HENKAN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_HIRAGANA
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_HOME
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_HOMEPAGE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_HP
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_I
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_IMAGES
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_INFO
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_INSERT
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_INS_LINE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_ISO
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_J
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_K
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_KATAKANA
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_KATAKANAHIRAGANA
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_KBDILLUMDOWN
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_KBDILLUMTOGGLE
Oct 28 19:31:32 vs lircd2uinput: uinput.KEY_KBDILLUMUP
Oct 28 19:31:32 vs rsyslogd-2177: imuxsock begins to drop messages from pid 22352 due to rate-limiting
Oct 28 19:31:32 vs lircd-0.9.0[22077]: removed client
Oct 28 19:31:40 vs lircd2uinput: Started lircd2uinput with these options:
Oct 28 19:31:40 vs lircd2uinput: wait_repeats = 2
Oct 28 19:31:40 vs lircd2uinput: max_gap = 300000
Oct 28 19:31:40 vs lircd2uinput: min_gap = 150000
Oct 28 19:31:40 vs lircd2uinput: acceleration = 0.25
Oct 28 19:31:40 vs lircd2uinput: lircd_socket = /var/run/lirc/lircd.22077
Oct 28 19:31:40 vs lircd-0.9.0[22077]: accepted new client on /var/run/lirc/lircd.22077
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_0
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_1
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_102ND
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_10CHANNELSDOWN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_10CHANNELSUP
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_2
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_3
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_4
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_5
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_6
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_7
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_8
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_9
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_A
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_AB
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_ADDRESSBOOK
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_AGAIN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_ALTERASE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_ANGLE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_APOSTROPHE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_ARCHIVE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_AUDIO
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_AUX
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_B
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BACK
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BACKSLASH
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BACKSPACE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BASSBOOST
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BATTERY
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BLUE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BLUETOOTH
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BOOKMARKS
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BREAK
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRIGHTNESSDOWN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRIGHTNESSUP
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRIGHTNESS_CYCLE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRIGHTNESS_ZERO
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT1
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT10
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT2
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT3
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT4
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT5
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT6
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT7
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT8
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_BRL_DOT9
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_C
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CALC
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CALENDAR
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAMERA
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAMERA_DOWN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAMERA_FOCUS
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAMERA_LEFT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAMERA_RIGHT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAMERA_UP
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAMERA_ZOOMIN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAMERA_ZOOMOUT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CANCEL
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CAPSLOCK
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CHANNEL
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CHANNELDOWN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CHANNELUP
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CHAT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CLEAR
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CLOSE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CLOSECD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_COFFEE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_COMMA
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_COMPOSE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_COMPUTER
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CONFIG
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CONNECT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CONTEXT_MENU
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_COPY
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CUT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_CYCLEWINDOWS
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_D
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DASHBOARD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DATABASE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DELETE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DELETEFILE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DEL_EOL
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DEL_EOS
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DEL_LINE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DIGITS
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DIRECTION
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DIRECTORY
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DISPLAYTOGGLE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DISPLAY_OFF
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DOCUMENTS
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DOLLAR
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DOT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DOWN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_DVD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_E
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EDIT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EDITOR
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EJECTCD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EJECTCLOSECD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EMAIL
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_END
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_ENTER
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EPG
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EQUAL
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_ESC
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EURO
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_EXIT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F1
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F10
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F11
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F12
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F13
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F14
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F15
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F16
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F17
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F18
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F19
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F2
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F20
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F21
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F22
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F23
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F24
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F3
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F4
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F5
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F6
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F7
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F8
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_F9
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FASTFORWARD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FAVORITES
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FILE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FINANCE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FIND
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FIRST
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_1
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_2
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_B
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_D
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_E
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_ESC
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F1
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F10
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F11
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F12
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F2
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F3
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F4
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F5
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F6
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F7
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F8
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_F9
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FN_S
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FORWARD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FORWARDMAIL
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FRAMEBACK
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FRAMEFORWARD
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_FRONT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_G
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_GAMES
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_GOTO
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_GRAPHICSEDITOR
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_GRAVE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_GREEN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_H
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_HANGEUL
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_HANJA
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_HELP
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_HENKAN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_HIRAGANA
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_HOME
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_HOMEPAGE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_HP
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_I
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_IMAGES
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_INFO
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_INSERT
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_INS_LINE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_ISO
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_J
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_K
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_KATAKANA
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_KATAKANAHIRAGANA
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_KBDILLUMDOWN
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_KBDILLUMTOGGLE
Oct 28 19:31:40 vs lircd2uinput: uinput.KEY_KBDILLUMUPOct 28 19:31:40 vs rsyslogd-2177: imuxsock begins to drop messages from pid 22354 due to rate-limiting -
If I wouldn't see all keys pressed in alphabetic order, I would believe you are sitting on your remote control.
Gerald
-
If I wouldn't see all keys pressed in alphabetic order, I would believe you are sitting on your remote control.
Gerald
Dann hätte er die aber schnell gedrückt. Oder sind das irgendwelche Mappings?
-
Oder sind das irgendwelche Mappings?
Das ist die Liste der Tasten, die das Programm drücken kann.I am wondering why the debug mode is active...
-
I use MCE remote + Harmony. This problem took place after installing media-build-experimental-dims
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-55-generic (buildd@batsu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 (Ubuntu 3.2.0-55.85-generic 3.2.51)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-55-generic root=UUID=d07dc680-eb16-4a38-b630-02bede841da8 ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000deb90000 (usable)
[ 0.000000] BIOS-e820: 00000000deb90000 - 00000000df140000 (reserved)
[ 0.000000] BIOS-e820: 00000000df140000 - 00000000df385000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000df385000 - 00000000df393000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000df393000 - 00000000df3c0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000df3c0000 - 00000000df3c5000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000df3c5000 - 00000000df408000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000df408000 - 00000000df800000 (usable)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000041f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO GEN3, BIOS 3603 11/09/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 400000000 mask FF0000000 write-back
[ 0.000000] 2 base 410000000 mask FF8000000 write-back
[ 0.000000] 3 base 418000000 mask FFC000000 write-back
[ 0.000000] 4 base 41C000000 mask FFE000000 write-back
[ 0.000000] 5 base 41E000000 mask FFF000000 write-back
[ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 16GB, type WB
[ 0.000000] reg 1, base: 16GB, range: 256MB, type WB
[ 0.000000] reg 2, base: 16640MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 16768MB, range: 64MB, type WB
[ 0.000000] reg 4, base: 16832MB, range: 32MB, type WB
[ 0.000000] reg 5, base: 16864MB, range: 16MB, type WB
[ 0.000000] reg 6, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 16368M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 32M num_reg: 7 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 8GB, type WB
[ 0.000000] reg 5, base: 16GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 16880MB, range: 16MB, type UC
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fce30] fce30
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000df800000
[ 0.000000] 0000000000 - 00df800000 page 2M
[ 0.000000] kernel direct mapping tables up to df800000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000041f000000
[ 0.000000] 0100000000 - 041f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 41f000000 @ df7f2000-df800000
[ 0.000000] RAMDISK: 36336000 - 37193000
[ 0.000000] ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000df385078 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000df390c70 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000df385170 0BAFE (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000df3bef80 00040
[ 0.000000] ACPI: APIC 00000000df390d68 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000df390e00 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000df390e40 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000df390e78 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000df3911e8 00860 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000df391a48 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000df3924e0 00078 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000041f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000041f000000
[ 0.000000] NODE_DATA [000000041effb000 - 000000041effffff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040e600000-ffff88041e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0041f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x000deb90
[ 0.000000] 0: 0x000df408 -> 0x000df800
[ 0.000000] 0: 0x00100000 -> 0x0041f000
[ 0.000000] On node 0 totalpages: 4185875
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 892872 pages, LIFO batch:31
[ 0.000000] Normal zone: 51136 pages used for memmap
[ 0.000000] Normal zone: 3221568 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000deb90000 - 00000000df140000
[ 0.000000] PM: Registered nosave memory: 00000000df140000 - 00000000df385000
[ 0.000000] PM: Registered nosave memory: 00000000df385000 - 00000000df393000
[ 0.000000] PM: Registered nosave memory: 00000000df393000 - 00000000df3c0000
[ 0.000000] PM: Registered nosave memory: 00000000df3c0000 - 00000000df3c5000
[ 0.000000] PM: Registered nosave memory: 00000000df3c5000 - 00000000df408000
[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at df800000 (gap: df800000:18800000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88041ec00000 s83136 r8192 d23360 u262144
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4118350
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-55-generic root=UUID=d07dc680-eb16-4a38-b630-02bede841da8 ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16383808k/17285120k available (6585k kernel code, 541620k absent, 359692k reserved, 6620k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 134217728 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2508.113 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5016.22 BogoMIPS (lpj=10032452)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000025] Security Framework initialized
[ 0.000036] AppArmor: AppArmor initialized
[ 0.000037] Yama: becoming mindful.
[ 0.000959] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004781] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006466] Mount-cache hash table entries: 256
[ 0.006555] Initializing cgroup subsys cpuacct
[ 0.006559] Initializing cgroup subsys memory
[ 0.006565] Initializing cgroup subsys devices
[ 0.006567] Initializing cgroup subsys freezer
[ 0.006568] Initializing cgroup subsys blkio
[ 0.006572] Initializing cgroup subsys perf_event
[ 0.006596] CPU: Physical Processor ID: 0
[ 0.006597] CPU: Processor Core ID: 0
[ 0.006601] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.006602] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.006953] mce: CPU supports 9 MCE banks
[ 0.006965] CPU0: Thermal monitoring enabled (TM1)
[ 0.006972] using mwait in idle threads.
[ 0.008848] ACPI: Core revision 20110623
[ 0.228232] ftrace: allocating 26595 entries in 105 pages
[ 0.236171] DMAR: Host address width 36
[ 0.236173] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.236180] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f010da
[ 0.236182] DMAR: RMRR base: 0x000000df0c2000 end: 0x000000df0d3fff
[ 0.236263] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.236264] HPET id 0 under DRHD base 0xfed90000
[ 0.236336] Enabled IRQ remapping in x2apic mode
[ 0.236337] Enabling x2apic
[ 0.236338] Enabled x2apic
[ 0.236343] Switched APIC routing to cluster x2apic.
[ 0.236768] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.276425] CPU0: Intel(R) Core(TM) i7-3770T CPU @ 2.50GHz stepping 09
[ 0.384115] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.384120] ... version: 3
[ 0.384121] ... bit width: 48
[ 0.384122] ... generic registers: 4
[ 0.384123] ... value mask: 0000ffffffffffff
[ 0.384124] ... max period: 000000007fffffff
[ 0.384125] ... fixed-purpose events: 3
[ 0.384126] ... event mask: 000000070000000f
[ 0.384249] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.384314] Booting Node 0, Processors #1
[ 0.384315] smpboot cpu 1: start_ip = 96000
[ 0.492510] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.492580] #2
[ 0.492581] smpboot cpu 2: start_ip = 96000
[ 0.600470] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.600535] #3
[ 0.600536] smpboot cpu 3: start_ip = 96000
[ 0.708427] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.708491] #4
[ 0.708492] smpboot cpu 4: start_ip = 96000
[ 0.816284] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.816362] #5
[ 0.816363] smpboot cpu 5: start_ip = 96000
[ 0.924256] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.924324] #6
[ 0.924325] smpboot cpu 6: start_ip = 96000
[ 1.032117] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.032184] #7 Ok.
[ 1.032185] smpboot cpu 7: start_ip = 96000
[ 1.140076] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.140102] Brought up 8 CPUs
[ 1.140104] Total of 8 processors activated (40129.94 BogoMIPS).
[ 1.149036] devtmpfs: initialized
[ 1.150009] EVM: security.selinux
[ 1.150011] EVM: security.SMACK64
[ 1.150012] EVM: security.capability
[ 1.150031] PM: Registering ACPI NVS region at df140000 (2379776 bytes)
[ 1.150060] PM: Registering ACPI NVS region at df393000 (184320 bytes)
[ 1.150063] PM: Registering ACPI NVS region at df3c5000 (274432 bytes)
[ 1.150731] print_constraints: dummy:
[ 1.150760] RTC time: 15:56:30, date: 10/28/13
[ 1.150785] NET: Registered protocol family 16
[ 1.150866] Trying to unpack rootfs image as initramfs...
[ 1.150868] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.150871] ACPI: bus type pci registered
[ 1.150924] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 1.150926] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 1.162409] PCI: Using configuration type 1 for base access
[ 1.163237] bio: create slab <bio-0> at 0
[ 1.163294] ACPI: Added _OSI(Module Device)
[ 1.163296] ACPI: Added _OSI(Processor Device)
[ 1.163297] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.163299] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.164658] ACPI: EC: Look up EC in DSDT
[ 1.165961] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.203911] ACPI: SSDT 00000000df0ed018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.204257] ACPI: Dynamic OEM Table Load:
[ 1.204260] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 1.235728] ACPI: SSDT 00000000df0eea98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.236096] ACPI: Dynamic OEM Table Load:
[ 1.236098] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 1.267594] ACPI: SSDT 00000000df0efc18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.267932] ACPI: Dynamic OEM Table Load:
[ 1.267934] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.292479] ACPI: Interpreter enabled
[ 1.292483] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.292504] ACPI: Using IOAPIC for interrupt routing
[ 1.297233] ACPI: Power Resource [FN00] (off)
[ 1.297293] ACPI: Power Resource [FN01] (off)
[ 1.297353] ACPI: Power Resource [FN02] (off)
[ 1.297410] ACPI: Power Resource [FN03] (off)
[ 1.297469] ACPI: Power Resource [FN04] (off)
[ 1.297722] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.297906] ACPI: No dock devices found.
[ 1.297907] HEST: Table not found.
[ 1.297910] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.298156] \_SB_.PCI0:_OSC invalid UUID
[ 1.298157] _OSC request data:1 8 0
[ 1.298160] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.298541] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.298544] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.298545] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.298547] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.298549] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.298551] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.298552] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.298554] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.298556] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
[ 1.298566] pci 0000:00:00.0: [8086:0150] type 0 class 0x000600
[ 1.298599] pci 0000:00:01.0: [8086:0151] type 1 class 0x000604
[ 1.298627] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.298630] pci 0000:00:01.0: PME# disabled
[ 1.298672] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.298696] pci 0000:00:16.0: reg 10: [mem 0xf7728000-0xf772800f 64bit]
[ 1.298772] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.298776] pci 0000:00:16.0: PME# disabled
[ 1.298804] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
[ 1.298821] pci 0000:00:19.0: reg 10: [mem 0xf7700000-0xf771ffff]
[ 1.298830] pci 0000:00:19.0: reg 14: [mem 0xf7725000-0xf7725fff]
[ 1.298838] pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
[ 1.298901] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.298905] pci 0000:00:19.0: PME# disabled
[ 1.298928] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.298950] pci 0000:00:1a.0: reg 10: [mem 0xf7724000-0xf77243ff]
[ 1.299040] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.299044] pci 0000:00:1a.0: PME# disabled
[ 1.299066] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.299146] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.299149] pci 0000:00:1c.0: PME# disabled
[ 1.299172] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 1.299251] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.299255] pci 0000:00:1c.1: PME# disabled
[ 1.299279] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 1.299358] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.299361] pci 0000:00:1c.2: PME# disabled
[ 1.299383] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 1.299462] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.299466] pci 0000:00:1c.3: PME# disabled
[ 1.299489] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 1.299573] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.299577] pci 0000:00:1c.4: PME# disabled
[ 1.299601] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604
[ 1.299680] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 1.299684] pci 0000:00:1c.6: PME# disabled
[ 1.299707] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[ 1.299786] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 1.299790] pci 0000:00:1c.7: PME# disabled
[ 1.299817] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.299838] pci 0000:00:1d.0: reg 10: [mem 0xf7723000-0xf77233ff]
[ 1.299929] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.299933] pci 0000:00:1d.0: PME# disabled
[ 1.299958] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
[ 1.300083] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[ 1.300102] pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
[ 1.300109] pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
[ 1.300117] pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
[ 1.300125] pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
[ 1.300133] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 1.300141] pci 0000:00:1f.2: reg 24: [mem 0xf7722000-0xf77227ff]
[ 1.300185] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.300189] pci 0000:00:1f.2: PME# disabled
[ 1.300206] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.300221] pci 0000:00:1f.3: reg 10: [mem 0xf7721000-0xf77210ff 64bit]
[ 1.300243] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 1.300296] pci 0000:01:00.0: [10de:0de1] type 0 class 0x000300
[ 1.300304] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 1.300313] pci 0000:01:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 1.300321] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 1.300327] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 1.300333] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 1.300378] pci 0000:01:00.1: [10de:0bea] type 0 class 0x000403
[ 1.300386] pci 0000:01:00.1: reg 10: [mem 0xf7080000-0xf7083fff]
[ 1.307499] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.307501] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.307504] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.307507] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 1.307577] pci 0000:02:00.0: [dd01:0003] type 0 class 0x000480
[ 1.307608] pci 0000:02:00.0: reg 10: [mem 0xf7600000-0xf760ffff 64bit]
[ 1.315497] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.315503] pci 0000:00:1c.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 1.315580] pci 0000:03:00.0: [1b21:1042] type 0 class 0x000c03
[ 1.315609] pci 0000:03:00.0: reg 10: [mem 0xf7500000-0xf7507fff 64bit]
[ 1.315759] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 1.315764] pci 0000:03:00.0: PME# disabled
[ 1.323491] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.323498] pci 0000:00:1c.1: bridge window [mem 0xf7500000-0xf75fffff]
[ 1.323578] pci 0000:04:00.0: [8086:10d3] type 0 class 0x000200
[ 1.323605] pci 0000:04:00.0: reg 10: [mem 0xf74c0000-0xf74dffff]
[ 1.323625] pci 0000:04:00.0: reg 14: [mem 0xf7400000-0xf747ffff]
[ 1.323645] pci 0000:04:00.0: reg 18: [io 0xd000-0xd01f]
[ 1.323664] pci 0000:04:00.0: reg 1c: [mem 0xf74e0000-0xf74e3fff]
[ 1.323720] pci 0000:04:00.0: reg 30: [mem 0xf7480000-0xf74bffff pref]
[ 1.323827] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 1.323834] pci 0000:04:00.0: PME# disabled
[ 1.331488] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.331493] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.331497] pci 0000:00:1c.2: bridge window [mem 0xf7400000-0xf74fffff]
[ 1.331567] pci 0000:05:00.0: [197b:2362] type 0 class 0x000101
[ 1.331602] pci 0000:05:00.0: reg 10: [io 0xc040-0xc047]
[ 1.331618] pci 0000:05:00.0: reg 14: [io 0xc030-0xc033]
[ 1.331635] pci 0000:05:00.0: reg 18: [io 0xc020-0xc027]
[ 1.331651] pci 0000:05:00.0: reg 1c: [io 0xc010-0xc013]
[ 1.331667] pci 0000:05:00.0: reg 20: [io 0xc000-0xc00f]
[ 1.331684] pci 0000:05:00.0: reg 24: [mem 0xf7310000-0xf73101ff]
[ 1.331700] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 1.331763] pci 0000:05:00.0: PME# supported from D3hot
[ 1.331769] pci 0000:05:00.0: PME# disabled
[ 1.339481] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 1.339485] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.339489] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
[ 1.339566] pci 0000:06:00.0: [1b21:1042] type 0 class 0x000c03
[ 1.339595] pci 0000:06:00.0: reg 10: [mem 0xf7200000-0xf7207fff 64bit]
[ 1.339745] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 1.339750] pci 0000:06:00.0: PME# disabled
[ 1.347474] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[ 1.347480] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
[ 1.347545] pci 0000:07:00.0: [1b21:1080] type 1 class 0x000604
[ 1.347667] pci 0000:00:1c.6: PCI bridge to [bus 07-08] (subtractive decode)
[ 1.347678] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.347680] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.347681] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.347683] pci 0000:00:1c.6: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.347685] pci 0000:00:1c.6: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.347687] pci 0000:00:1c.6: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 1.347689] pci 0000:00:1c.6: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.347692] pci 0000:00:1c.6: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 1.347694] pci 0000:00:1c.6: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 1.347810] pci 0000:07:00.0: PCI bridge to [bus 08-08] (subtractive decode)
[ 1.347832] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.347834] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.347835] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.347837] pci 0000:07:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 1.347839] pci 0000:07:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.347841] pci 0000:07:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.347843] pci 0000:07:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.347844] pci 0000:07:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.347846] pci 0000:07:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.347848] pci 0000:07:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 1.347850] pci 0000:07:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.347851] pci 0000:07:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 1.347853] pci 0000:07:00.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 1.347929] pci 0000:09:00.0: [1b4b:9172] type 0 class 0x000106
[ 1.347946] pci 0000:09:00.0: reg 10: [io 0xb040-0xb047]
[ 1.347959] pci 0000:09:00.0: reg 14: [io 0xb030-0xb033]
[ 1.347972] pci 0000:09:00.0: reg 18: [io 0xb020-0xb027]
[ 1.347985] pci 0000:09:00.0: reg 1c: [io 0xb010-0xb013]
[ 1.347998] pci 0000:09:00.0: reg 20: [io 0xb000-0xb00f]
[ 1.348011] pci 0000:09:00.0: reg 24: [mem 0xf7110000-0xf71101ff]
[ 1.348024] pci 0000:09:00.0: reg 30: [mem 0xf7100000-0xf710ffff pref]
[ 1.348083] pci 0000:09:00.0: PME# supported from D3hot
[ 1.348088] pci 0000:09:00.0: PME# disabled
[ 1.355468] pci 0000:00:1c.7: PCI bridge to [bus 09-09]
[ 1.355472] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 1.355476] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 1.355516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.355623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.355650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.355676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.355701] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.355732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 1.355759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP08._PRT]
[ 1.355785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 1.355816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
[ 1.355839] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07.PXSX._PRT]
[ 1.355932] \_SB_.PCI0:_OSC invalid UUID
[ 1.355934] _OSC request data:1 1f 0
[ 1.355937] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.355972] \_SB_.PCI0:_OSC invalid UUID
[ 1.355973] _OSC request data:1 0 1d
[ 1.355976] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.355977] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.359991] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.360030] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.360066] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.360102] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.360137] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 1.360172] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.360208] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.360245] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.360332] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.360335] vgaarb: loaded
[ 1.360336] vgaarb: bridge control possible 0000:01:00.0
[ 1.360404] i2c-core: driver [aat2870] using legacy suspend method
[ 1.360405] i2c-core: driver [aat2870] using legacy resume method
[ 1.360450] SCSI subsystem initialized
[ 1.360486] libata version 3.00 loaded.
[ 1.360517] usbcore: registered new interface driver usbfs
[ 1.360525] usbcore: registered new interface driver hub
[ 1.360540] usbcore: registered new device driver usb
[ 1.360599] PCI: Using ACPI for IRQ routing
[ 1.362018] PCI: pci_cache_line_size set to 64 bytes
[ 1.362124] reserve RAM buffer: 000000000009b400 - 000000000009ffff
[ 1.362126] reserve RAM buffer: 00000000deb90000 - 00000000dfffffff
[ 1.362128] reserve RAM buffer: 00000000df800000 - 00000000dfffffff
[ 1.362129] reserve RAM buffer: 000000041f000000 - 000000041fffffff
[ 1.362201] NetLabel: Initializing
[ 1.362203] NetLabel: domain hash size = 128
[ 1.362204] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.362211] NetLabel: unlabeled traffic allowed by default
[ 1.362247] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.362252] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.364268] Switching to clocksource hpet
[ 1.368755] AppArmor: AppArmor Filesystem Enabled
[ 1.368769] pnp: PnP ACPI init
[ 1.368778] ACPI: bus type pnp registered
[ 1.368986] pnp 00:00: [bus 00-3e]
[ 1.368988] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.368990] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.368991] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.368993] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.368994] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.368997] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.368999] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.369000] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.369001] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.369003] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.369004] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.369006] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.369007] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.369009] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.369010] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.369012] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.369013] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.369015] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[ 1.369016] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.369068] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.369087] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 1.369117] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.369119] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.369128] pnp 00:02: [io 0x0000-0x001f]
[ 1.369129] pnp 00:02: [io 0x0081-0x0091]
[ 1.369131] pnp 00:02: [io 0x0093-0x009f]
[ 1.369132] pnp 00:02: [io 0x00c0-0x00df]
[ 1.369133] pnp 00:02: [dma 4]
[ 1.369149] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.369155] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.369170] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.369232] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.369247] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.369255] pnp 00:05: [io 0x002e-0x002f]
[ 1.369257] pnp 00:05: [io 0x004e-0x004f]
[ 1.369258] pnp 00:05: [io 0x0061]
[ 1.369259] pnp 00:05: [io 0x0063]
[ 1.369260] pnp 00:05: [io 0x0065]
[ 1.369261] pnp 00:05: [io 0x0067]
[ 1.369263] pnp 00:05: [io 0x0070]
[ 1.369264] pnp 00:05: [io 0x0080]
[ 1.369265] pnp 00:05: [io 0x0092]
[ 1.369266] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.369267] pnp 00:05: [io 0x0680-0x069f]
[ 1.369269] pnp 00:05: [io 0x0200-0x020f]
[ 1.369270] pnp 00:05: [io 0xffff]
[ 1.369271] pnp 00:05: [io 0xffff]
[ 1.369272] pnp 00:05: [io 0x0400-0x0453]
[ 1.369273] pnp 00:05: [io 0x0458-0x047f]
[ 1.369275] pnp 00:05: [io 0x0500-0x057f]
[ 1.369276] pnp 00:05: [io 0x164e-0x164f]
[ 1.369313] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.369315] system 00:05: [io 0x0200-0x020f] has been reserved
[ 1.369317] system 00:05: [io 0xffff] has been reserved
[ 1.369318] system 00:05: [io 0xffff] has been reserved
[ 1.369320] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.369322] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.369324] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.369325] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.369328] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.369334] pnp 00:06: [io 0x0070-0x0077]
[ 1.369344] pnp 00:06: [irq 8]
[ 1.369360] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.369382] pnp 00:07: [io 0x0454-0x0457]
[ 1.369412] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.369414] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.369464] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 1.369466] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 1.369467] pnp 00:08: [io 0x0290-0x029f]
[ 1.369469] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 1.369497] system 00:08: [io 0x0290-0x029f] has been reserved
[ 1.369499] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.369519] pnp 00:09: [io 0x0010-0x001f]
[ 1.369520] pnp 00:09: [io 0x0022-0x003f]
[ 1.369521] pnp 00:09: [io 0x0044-0x005f]
[ 1.369522] pnp 00:09: [io 0x0062-0x0063]
[ 1.369524] pnp 00:09: [io 0x0065-0x006f]
[ 1.369525] pnp 00:09: [io 0x0072-0x007f]
[ 1.369526] pnp 00:09: [io 0x0080]
[ 1.369527] pnp 00:09: [io 0x0084-0x0086]
[ 1.369529] pnp 00:09: [io 0x0088]
[ 1.369530] pnp 00:09: [io 0x008c-0x008e]
[ 1.369531] pnp 00:09: [io 0x0090-0x009f]
[ 1.369532] pnp 00:09: [io 0x00a2-0x00bf]
[ 1.369533] pnp 00:09: [io 0x00e0-0x00ef]
[ 1.369535] pnp 00:09: [io 0x04d0-0x04d1]
[ 1.369568] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 1.369571] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.369577] pnp 00:0a: [io 0x00f0-0x00ff]
[ 1.369583] pnp 00:0a: [irq 13]
[ 1.369600] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.369806] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 1.369807] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 1.369809] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 1.369810] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 1.369811] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[ 1.369813] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 1.369814] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 1.369816] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 1.369817] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 1.369818] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 1.369820] pnp 00:0b: [mem 0xe0000000-0xe0000fff]
[ 1.369873] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.369875] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.369876] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.369878] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.369880] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.369882] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.369884] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.369886] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.369888] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 1.369890] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.369891] system 00:0b: [mem 0xe0000000-0xe0000fff] has been reserved
[ 1.369894] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.369998] pnp: PnP ACPI: found 12 devices
[ 1.369999] ACPI: ACPI bus type pnp unregistered
[ 1.373923] Freeing initrd memory: 14708k freed
[ 1.375881] PCI: max bus depth: 2 pci_try_num: 3
[ 1.375954] pci 0000:00:1c.3: BAR 15: assigned [mem 0xe0100000-0xe01fffff pref]
[ 1.375956] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.375958] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.375961] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.375964] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 1.375967] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.375972] pci 0000:00:1c.0: bridge window [mem 0xf7600000-0xf76fffff]
[ 1.375980] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.375985] pci 0000:00:1c.1: bridge window [mem 0xf7500000-0xf75fffff]
[ 1.375993] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.375996] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 1.376001] pci 0000:00:1c.2: bridge window [mem 0xf7400000-0xf74fffff]
[ 1.376009] pci 0000:05:00.0: BAR 6: assigned [mem 0xe0100000-0xe010ffff pref]
[ 1.376011] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 1.376014] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 1.376019] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
[ 1.376023] pci 0000:00:1c.3: bridge window [mem 0xe0100000-0xe01fffff pref]
[ 1.376029] pci 0000:00:1c.4: PCI bridge to [bus 06-06]
[ 1.376034] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
[ 1.376042] pci 0000:07:00.0: PCI bridge to [bus 08-08]
[ 1.376061] pci 0000:00:1c.6: PCI bridge to [bus 07-08]
[ 1.376073] pci 0000:00:1c.7: PCI bridge to [bus 09-09]
[ 1.376075] pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
[ 1.376080] pci 0000:00:1c.7: bridge window [mem 0xf7100000-0xf71fffff]
[ 1.376100] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.376102] pci 0000:00:01.0: setting latency timer to 64
[ 1.376108] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.376112] pci 0000:00:1c.0: setting latency timer to 64
[ 1.376123] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.376127] pci 0000:00:1c.1: setting latency timer to 64
[ 1.376136] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.376140] pci 0000:00:1c.2: setting latency timer to 64
[ 1.376150] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.376154] pci 0000:00:1c.3: setting latency timer to 64
[ 1.376160] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.376164] pci 0000:00:1c.4: setting latency timer to 64
[ 1.376170] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.376174] pci 0000:00:1c.6: setting latency timer to 64
[ 1.376182] pci 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.376188] pci 0000:07:00.0: setting latency timer to 64
[ 1.376195] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.376199] pci 0000:00:1c.7: setting latency timer to 64
[ 1.376202] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.376203] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.376205] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.376207] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 1.376208] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 1.376210] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 1.376211] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[ 1.376213] pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
[ 1.376240] pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff]
[ 1.376242] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.376243] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.376245] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 1.376247] pci_bus 0000:02: resource 1 [mem 0xf7600000-0xf76fffff]
[ 1.376249] pci_bus 0000:03: resource 1 [mem 0xf7500000-0xf75fffff]
[ 1.376250] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 1.376252] pci_bus 0000:04: resource 1 [mem 0xf7400000-0xf74fffff]
[ 1.376253] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 1.376255] pci_bus 0000:05: resource 1 [mem 0xf7300000-0xf73fffff]
[ 1.376257] pci_bus 0000:05: resource 2 [mem 0xe0100000-0xe01fffff pref]
[ 1.376258] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[ 1.376260] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 1.376262] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 1.376263] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.376265] pci_bus 0000:07: resource 7 [mem 0x000d4000-0x000d7fff]
[ 1.376266] pci_bus 0000:07: resource 8 [mem 0x000d8000-0x000dbfff]
[ 1.376268] pci_bus 0000:07: resource 9 [mem 0x000dc000-0x000dffff]
[ 1.376270] pci_bus 0000:07: resource 10 [mem 0x000e0000-0x000e3fff]
[ 1.376271] pci_bus 0000:07: resource 11 [mem 0x000e4000-0x000e7fff]
[ 1.376273] pci_bus 0000:07: resource 12 [mem 0xe0000000-0xfeafffff]
[ 1.376275] pci_bus 0000:08: resource 8 [io 0x0000-0x0cf7]
[ 1.376276] pci_bus 0000:08: resource 9 [io 0x0d00-0xffff]
[ 1.376278] pci_bus 0000:08: resource 10 [mem 0x000a0000-0x000bffff]
[ 1.376279] pci_bus 0000:08: resource 11 [mem 0x000d4000-0x000d7fff]
[ 1.376281] pci_bus 0000:08: resource 12 [mem 0x000d8000-0x000dbfff]
[ 1.376283] pci_bus 0000:08: resource 13 [mem 0x000dc000-0x000dffff]
[ 1.376284] pci_bus 0000:08: resource 14 [mem 0x000e0000-0x000e3fff]
[ 1.376286] pci_bus 0000:08: resource 15 [mem 0x000e4000-0x000e7fff]
[ 1.376287] pci_bus 0000:08: resource 16 [mem 0xe0000000-0xfeafffff]
[ 1.376289] pci_bus 0000:09: resource 0 [io 0xb000-0xbfff]
[ 1.376291] pci_bus 0000:09: resource 1 [mem 0xf7100000-0xf71fffff]
[ 1.376313] NET: Registered protocol family 2
[ 1.376557] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 1.377264] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.378259] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.378379] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.378381] TCP reno registered
[ 1.378397] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.378447] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.378532] NET: Registered protocol family 1
[ 1.378553] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.396252] pci 0000:00:1a.0: PCI INT A disabled
[ 1.396282] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.416235] pci 0000:00:1d.0: PCI INT A disabled
[ 1.416254] pci 0000:01:00.0: Boot video device
[ 1.416273] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.416317] pci 0000:03:00.0: PCI INT A disabled
[ 1.416335] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.416376] pci 0000:06:00.0: PCI INT A disabled
[ 1.416386] PCI: CLS 64 bytes, default 64
[ 1.416390] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.416392] Placing 64MB software IO TLB between ffff8800dab90000 - ffff8800deb90000
[ 1.416394] software IO TLB at phys 0xdab90000 - 0xdeb90000
[ 1.416870] audit: initializing netlink socket (disabled)
[ 1.416876] type=2000 audit(1382975789.988:1): initialized
[ 1.436506] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.438389] VFS: Disk quotas dquot_6.5.2
[ 1.438425] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.438766] fuse init (API version 7.17)
[ 1.438826] msgmni has been set to 32028
[ 1.439062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.439081] io scheduler noop registered
[ 1.439083] io scheduler deadline registered
[ 1.439104] io scheduler cfq registered (default)
[ 1.439171] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.439193] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 1.439481] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.439493] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.439531] intel_idle: MWAIT substates: 0x1120
[ 1.439533] intel_idle: v0.4 model 0x3A
[ 1.439534] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.439616] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.439621] ACPI: Power Button [PWRB]
[ 1.439652] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.439654] ACPI: Power Button [PWRF]
[ 1.439711] ACPI: Fan [FAN0] (off)
[ 1.439734] ACPI: Fan [FAN1] (off)
[ 1.439756] ACPI: Fan [FAN2] (off)
[ 1.439777] ACPI: Fan [FAN3] (off)
[ 1.439798] ACPI: Fan [FAN4] (off)
[ 1.468380] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.468382] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.468526] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.468527] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.468560] ERST: Table is not found!
[ 1.468561] GHES: HEST is not enabled!
[ 1.468607] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.131977] Linux agpgart interface v0.103
[ 2.132972] brd: module loaded
[ 2.133454] loop: module loaded
[ 2.133537] ahci 0000:00:1f.2: version 3.0
[ 2.133544] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.133589] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 2.147778] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3e impl SATA mode
[ 2.147780] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 2.147784] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.180043] scsi0 : ahci
[ 2.180100] scsi1 : ahci
[ 2.180144] scsi2 : ahci
[ 2.180186] scsi3 : ahci
[ 2.180230] scsi4 : ahci
[ 2.180272] scsi5 : ahci
[ 2.180473] ata1: DUMMY
[ 2.180475] ata2: SATA max UDMA/133 abar m2048@0xf7722000 port 0xf7722180 irq 42
[ 2.180478] ata3: SATA max UDMA/133 abar m2048@0xf7722000 port 0xf7722200 irq 42
[ 2.180481] ata4: SATA max UDMA/133 abar m2048@0xf7722000 port 0xf7722280 irq 42
[ 2.180483] ata5: SATA max UDMA/133 abar m2048@0xf7722000 port 0xf7722300 irq 42
[ 2.180486] ata6: SATA max UDMA/133 abar m2048@0xf7722000 port 0xf7722380 irq 42
[ 2.180506] ahci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.180610] ahci 0000:05:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.180612] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.180619] ahci 0000:05:00.0: setting latency timer to 64
[ 2.180798] scsi6 : ahci
[ 2.180841] scsi7 : ahci
[ 2.180892] ata7: SATA max UDMA/133 abar m512@0xf7310000 port 0xf7310100 irq 19
[ 2.180896] ata8: SATA max UDMA/133 abar m512@0xf7310000 port 0xf7310180 irq 19
[ 2.180910] ahci 0000:09:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.180984] ahci 0000:09:00.0: irq 43 for MSI/MSI-X
[ 2.181037] ahci 0000:09:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 2.181040] ahci 0000:09:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 2.181045] ahci 0000:09:00.0: setting latency timer to 64
[ 2.181217] scsi8 : ahci
[ 2.181260] scsi9 : ahci
[ 2.181290] ata9: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110100 irq 43
[ 2.181294] ata10: SATA max UDMA/133 abar m512@0xf7110000 port 0xf7110180 irq 43
[ 2.181521] Fixed MDIO Bus: probed
[ 2.181534] tun: Universal TUN/TAP device driver, 1.6
[ 2.181536] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.181567] PPP generic driver version 2.4.2
[ 2.181631] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.181642] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.181654] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.181658] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.181689] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.181713] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.185591] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.185602] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7724000
[ 2.199712] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.199820] hub 1-0:1.0: USB hub found
[ 2.199823] hub 1-0:1.0: 2 ports detected
[ 2.199868] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.199880] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.199883] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.199913] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.199932] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.203800] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.203809] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7723000
[ 2.219709] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.219792] hub 2-0:1.0: USB hub found
[ 2.219794] hub 2-0:1.0: 2 ports detected
[ 2.219837] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.219845] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.219871] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.219891] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 2.219895] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.219923] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 2.281079] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 2.281084] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2.281089] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
[ 2.281093] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
[ 2.281098] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
[ 2.281102] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
[ 2.281107] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
[ 2.281111] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X
[ 2.281276] xHCI xhci_add_endpoint called for root hub
[ 2.281277] xHCI xhci_check_bandwidth called for root hub
[ 2.281295] hub 3-0:1.0: USB hub found
[ 2.281302] hub 3-0:1.0: 2 ports detected
[ 2.281344] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.281375] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 2.281442] xHCI xhci_add_endpoint called for root hub
[ 2.281443] xHCI xhci_check_bandwidth called for root hub
[ 2.281460] hub 4-0:1.0: USB hub found
[ 2.281466] hub 4-0:1.0: 2 ports detected
[ 2.299669] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.299689] xhci_hcd 0000:06:00.0: setting latency timer to 64
[ 2.299693] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.299722] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[ 2.360854] xhci_hcd 0000:06:00.0: irq 52 for MSI/MSI-X
[ 2.360859] xhci_hcd 0000:06:00.0: irq 53 for MSI/MSI-X
[ 2.360864] xhci_hcd 0000:06:00.0: irq 54 for MSI/MSI-X
[ 2.360868] xhci_hcd 0000:06:00.0: irq 55 for MSI/MSI-X
[ 2.360872] xhci_hcd 0000:06:00.0: irq 56 for MSI/MSI-X
[ 2.360876] xhci_hcd 0000:06:00.0: irq 57 for MSI/MSI-X
[ 2.360879] xhci_hcd 0000:06:00.0: irq 58 for MSI/MSI-X
[ 2.360883] xhci_hcd 0000:06:00.0: irq 59 for MSI/MSI-X
[ 2.361039] xHCI xhci_add_endpoint called for root hub
[ 2.361041] xHCI xhci_check_bandwidth called for root hub
[ 2.361060] hub 5-0:1.0: USB hub found
[ 2.361066] hub 5-0:1.0: 2 ports detected
[ 2.361107] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.361133] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[ 2.361206] xHCI xhci_add_endpoint called for root hub
[ 2.361207] xHCI xhci_check_bandwidth called for root hub
[ 2.361225] hub 6-0:1.0: USB hub found
[ 2.361231] hub 6-0:1.0: 2 ports detected
[ 2.379654] usbcore: registered new interface driver libusual
[ 2.379681] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.382040] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.382044] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.382127] mousedev: PS/2 mouse device common for all mice
[ 2.382219] rtc_cmos 00:06: RTC can wake from S4
[ 2.382308] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.382333] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.382384] device-mapper: uevent: version 1.0.3
[ 2.382428] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.382554] cpuidle: using governor ladder
[ 2.382755] cpuidle: using governor menu
[ 2.382757] EFI Variables Facility v0.08 2004-May-17
[ 2.382899] TCP cubic registered
[ 2.382968] NET: Registered protocol family 10
[ 2.383262] NET: Registered protocol family 17
[ 2.383265] Registering the dns_resolver key type
[ 2.383359] registered taskstats version 1
[ 2.390273] Magic number: 1:611:943
[ 2.390297] tty tty0: hash matches
[ 2.390299] tty console: hash matches
[ 2.390372] rtc_cmos 00:06: setting system clock to 2013-10-28 15:56:32 UTC (1382975792)
[ 2.391423] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.391425] EDD information not available.
[ 2.415574] Refined TSC clocksource calibration: 2508.177 MHz.
[ 2.415577] Switching to clocksource tsc
[ 2.499537] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.499540] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.499543] ata10: SATA link down (SStatus 0 SControl 300)
[ 2.499596] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.499599] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.499622] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.499638] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.499654] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.499873] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.499878] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88040447a5a0), AE_NOT_FOUND (20110623/psparse-536)
[ 2.499955] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.499959] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88040447a708), AE_NOT_FOUND (20110623/psparse-536)
[ 2.499969] ata2.00: ATA-9: M4-CT064M4SSD2, 0309, max UDMA/100
[ 2.499972] ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.500012] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.500016] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040447a618), AE_NOT_FOUND (20110623/psparse-536)
[ 2.500067] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.500073] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040447a690), AE_NOT_FOUND (20110623/psparse-536)
[ 2.500084] ata5.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 2.500086] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.500105] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.500109] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88040447a780), AE_NOT_FOUND (20110623/psparse-536)
[ 2.500162] ata3.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 2.500165] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.500181] ata4.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 2.500183] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.500219] ata6.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 2.500225] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.500272] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.500277] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88040447a5a0), AE_NOT_FOUND (20110623/psparse-536)
[ 2.500353] ata2.00: configured for UDMA/100
[ 2.500422] scsi 1:0:0:0: Direct-Access ATA M4-CT064M4SSD2 0309 PQ: 0 ANSI: 5
[ 2.500501] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.500505] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88040447a708), AE_NOT_FOUND (20110623/psparse-536)
[ 2.500527] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.500531] sd 1:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.500600] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.500605] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff88040447a618), AE_NOT_FOUND (20110623/psparse-536)
[ 2.500626] sd 1:0:0:0: [sda] Write Protect is off
[ 2.500628] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.500633] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.500638] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88040447a690), AE_NOT_FOUND (20110623/psparse-536)
[ 2.500651] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.500666] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359)
[ 2.500671] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88040447a780), AE_NOT_FOUND (20110623/psparse-536)
[ 2.500725] ata3.00: configured for UDMA/133
[ 2.500746] ata4.00: configured for UDMA/133
[ 2.500780] ata6.00: configured for UDMA/133
[ 2.500793] scsi 2:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
[ 2.500879] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.500881] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 2.500893] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.500912] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.500914] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.500927] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.500961] scsi 3:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
[ 2.501050] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.501053] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 2.501056] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.501100] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.501103] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.501122] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.501132] sda: sda1 sda2 < sda5 >
[ 2.501358] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.501590] ata5.00: configured for UDMA/133
[ 2.501629] scsi 4:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
[ 2.501702] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.501705] sd 4:0:0:0: [sdd] 4096-byte physical blocks
[ 2.501718] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.501749] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.501751] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.501770] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.501799] scsi 5:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
[ 2.501881] sd 5:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.501883] sd 5:0:0:0: [sde] 4096-byte physical blocks
[ 2.501903] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 2.501915] sd 5:0:0:0: [sde] Write Protect is off
[ 2.501917] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 2.501931] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.505528] sdd: sdd1
[ 2.505684] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 2.506320] sde: sde1
[ 2.506447] sd 5:0:0:0: [sde] Attached SCSI disk
[ 2.508830] sdc: sdc1
[ 2.508970] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.510788] sdb: sdb1
[ 2.510913] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.511490] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.643875] hub 1-1:1.0: USB hub found
[ 2.643976] hub 1-1:1.0: 6 ports detected
[ 2.755331] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.887714] hub 2-1:1.0: USB hub found
[ 2.887817] hub 2-1:1.0: 8 ports detected
[ 2.895248] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.896575] ata9.00: ATAPI: PIONEER DVD-RW DVR-215D, 1.13, max UDMA/66
[ 2.898301] ata9.00: configured for UDMA/66
[ 2.922043] scsi 8:0:0:0: CD-ROM PIONEER DVD-RW DVR-215D 1.13 PQ: 0 ANSI: 5
[ 2.940170] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 2.940172] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.940247] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 2.940288] sr 8:0:0:0: Attached scsi generic sg5 type 5
[ 2.941854] Freeing unused kernel memory: 924k freed
[ 2.941941] Write protecting the kernel read-only data: 12288k
[ 2.947172] Freeing unused kernel memory: 1588k freed
[ 2.951164] Freeing unused kernel memory: 1188k freed
[ 2.962732] udevd[132]: starting version 175
[ 2.967816] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 2.967818] vesafb: scrolling: redraw
[ 2.967821] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.973761] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90006600000, using 3072k, total 3072k
[ 2.973860] Console: switching to colour frame buffer device 128x48
[ 2.975735] fb0: VESA VGA frame buffer device
[ 2.978248] md: linear personality registered for level -1
[ 2.979543] md: multipath personality registered for level -4
[ 2.980724] md: raid0 personality registered for level 0
[ 2.982521] md: raid1 personality registered for level 1
[ 2.983968] async_tx: api initialized (async)
[ 2.993187] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.993190] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.993225] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.993235] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.993342] e1000e 0000:00:19.0: irq 60 for MSI/MSI-X
[ 3.051148] raid6: int64x1 2738 MB/s
[ 3.055149] usb 5-2: new full-speed USB device number 2 using xhci_hcd
[ 3.056851] md: bind<sde1>
[ 3.067232] md: bind<sdd1>
[ 3.071747] md: bind<sdc1>
[ 3.073115] usb 5-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 3.073410] md: bind<sdb1>
[ 3.076411] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-2/5-2:1.0/input/input2
[ 3.076471] generic-usb 0003:24AE:1001.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-0000:06:00.0-2/input0
[ 3.077788] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/pci0000:00/0000:00:1c.4/0000:06:00.0/usb5/5-2/5-2:1.1/input/input3
[ 3.077912] generic-usb 0003:24AE:1001.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-0000:06:00.0-2/input1
[ 3.077926] usbcore: registered new interface driver usbhid
[ 3.077927] usbhid: USB HID core driver
[ 3.119104] raid6: int64x2 2579 MB/s
[ 3.143156] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 3.187058] raid6: int64x4 2495 MB/s
[ 3.238123] Initializing USB Mass Storage driver...
[ 3.238204] scsi10 : usb-storage 1-1.1:1.0
[ 3.238265] usbcore: registered new interface driver usb-storage
[ 3.238266] USB Mass Storage support registered.
[ 3.255009] raid6: int64x8 2031 MB/s
[ 3.293852] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) c8:60:00:13:97:19
[ 3.293855] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 3.293890] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 3.293902] e1000e 0000:04:00.0: Disabling ASPM L0s L1
[ 3.293917] e1000e 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.293937] e1000e 0000:04:00.0: setting latency timer to 64
[ 3.294155] e1000e 0000:04:00.0: irq 61 for MSI/MSI-X
[ 3.294160] e1000e 0000:04:00.0: irq 62 for MSI/MSI-X
[ 3.294166] e1000e 0000:04:00.0: irq 63 for MSI/MSI-X
[ 3.307050] usb 2-1.1: new full-speed USB device number 3 using ehci_hcd
[ 3.322961] raid6: sse2x1 6008 MB/s
[ 3.390915] raid6: sse2x2 7990 MB/s
[ 3.400069] e1000e 0000:04:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:1b:21:d2:a0:6c
[ 3.400071] e1000e 0000:04:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 3.400086] e1000e 0000:04:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-006
[ 3.458869] raid6: sse2x4 8944 MB/s
[ 3.458871] raid6: using algorithm sse2x4 (8944 MB/s)
[ 3.459180] xor: automatically using best checksumming function: generic_sse
[ 3.470943] usb 2-1.2: new low-speed USB device number 4 using ehci_hcd
[ 3.478867] generic_sse: 11522.000 MB/sec
[ 3.478869] xor: using function: generic_sse (11522.000 MB/sec)
[ 3.479465] md: raid6 personality registered for level 6
[ 3.479467] md: raid5 personality registered for level 5
[ 3.479468] md: raid4 personality registered for level 4
[ 3.483170] md: raid10 personality registered for level 10
[ 3.575021] bio: create slab <bio-1> at 1
[ 3.575032] md/raid:md0: device sdb1 operational as raid disk 0
[ 3.575034] md/raid:md0: device sdc1 operational as raid disk 1
[ 3.575036] md/raid:md0: device sdd1 operational as raid disk 2
[ 3.575038] md/raid:md0: device sde1 operational as raid disk 3
[ 3.575315] md/raid:md0: allocated 4280kB
[ 3.575334] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 3.575335] RAID conf printout:
[ 3.575336] --- level:5 rd:4 wd:4
[ 3.575338] disk 0, o:1, dev:sdb1
[ 3.575340] disk 1, o:1, dev:sdc1
[ 3.575341] disk 2, o:1, dev:sdd1
[ 3.575342] disk 3, o:1, dev:sde1
[ 3.575365] md0: detected capacity change from 0 to 6000789159936
[ 3.578078] md0: unknown partition table
[ 3.585853] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input4
[ 3.585924] generic-usb 0003:04D9:1203.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 04d9:1203] on usb-0000:00:1d.0-1.2/input0
[ 3.603022] input: HID 04d9:1203 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input5
[ 3.603096] generic-usb 0003:04D9:1203.0004: input,hidraw3: USB HID v1.11 Device [HID 04d9:1203] on usb-0000:00:1d.0-1.2/input1
[ 3.898591] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.225397] Adding 7833596k swap on /dev/sda5. Priority:-1 extents:1 across:7833596k SS
[ 4.249533] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.249538] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 4.252899] udevd[442]: starting version 175
[ 4.264187] lp: driver loaded but no devices found
[ 4.269731] w83627ehf: Found NCT6776F chip at 0x290
[ 4.277217] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.288816] wmi: Mapper loaded
[ 4.290358] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 4.290637] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.290644] mei 0000:00:16.0: setting latency timer to 64
[ 4.290703] mei 0000:00:16.0: irq 64 for MSI/MSI-X
[ 4.311519] WARNING: You are using an experimental version of the media stack.
[ 4.311520] As the driver is backported to an older kernel, it doesn't offer
[ 4.311521] enough quality for its usage in production.
[ 4.311522] Use it with care.
[ 4.311523] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 4.311523] dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
[ 4.311525] 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
[ 4.311526] 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
[ 4.311527] experimental: 4f70550f5de950677b8254be73ec04f7c9cd66ba experimental: Do not patch out-of-tree drivers.
[ 4.311528] ngene-octopus-test: 406ffecccbec6e22da954a07b7398292330bc767 ddbridge: Add ID of Digital Devices Octopus V3.
[ 4.311529] v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
[ 4.315778] Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH
[ 4.315817] DDBridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.315825] DDBridge driver detected: Digital Devices Cine S2 V6.5 DVB adapter
[ 4.315859] HW 0001000d REG 00010004
[ 4.315925] DDBridge 0000:02:00.0: irq 65 for MSI/MSI-X
[ 4.316798] Port 0 (TAB 1): DUAL DVB-S2
[ 4.318949] Port 1 (TAB 2): NO MODULE
[ 4.319564] Port 2 (TAB 3): NO MODULE
[ 4.320678] Port 3 (TAB 4): DUAL DVB-S2
[ 4.321040] DVB: registering new adapter (DDBridge)
[ 4.321042] DVB: registering new adapter (DDBridge)
[ 4.321044] DVB: registering new adapter (DDBridge)
[ 4.321045] DVB: registering new adapter (DDBridge)
[ 4.335574] WARNING: You are using an experimental version of the media stack.
[ 4.335575] As the driver is backported to an older kernel, it doesn't offer
[ 4.335576] enough quality for its usage in production.
[ 4.335577] Use it with care.
[ 4.335577] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 4.335578] dfb9f94e8e5e7f73c8e2bcb7d4fb1de57e7c333d [media] stk1160: Build as a module if SND is m and audio support is selected
[ 4.335580] 9f1595245574a2dc1fb375df665e4d9fe336a9c4 [media] cx23885-video: fix two warnings
[ 4.335580] 5bc08e1921e46101457d3be09835697490177fdd [media] cx23885[v4]: Fix interrupt storm when enabling IR receiver
[ 4.335582] experimental: 4f70550f5de950677b8254be73ec04f7c9cd66ba experimental: Do not patch out-of-tree drivers.
[ 4.335583] ngene-octopus-test: 406ffecccbec6e22da954a07b7398292330bc767 ddbridge: Add ID of Digital Devices Octopus V3.
[ 4.335584] v4l-dvb-saa716x: 0dab24906ff057b72537b01605bdf06c4dbb1c62 saa716x: i2c_del_adapter() fix
[ 4.352486] nvidia: module license 'NVIDIA' taints kernel.
[ 4.352489] Disabling lock debugging due to kernel taint
[ 4.360836] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.360840] hda_intel: Disabling MSI
[ 4.360888] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 4.362293] Registered IR keymap rc-rc6-mce
[ 4.363160] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/rc/rc0/input6
[ 4.363816] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/rc/rc0
[ 4.366434] IR NEC protocol handler initialized
[ 4.367955] IR RC5(x) protocol handler initialized
[ 4.369064] IR RC6 protocol handler initialized
[ 4.370264] IR Sony protocol handler initialized
[ 4.372290] IR MCE Keyboard/mouse protocol handler initialized
[ 4.372483] IR JVC protocol handler initialized
[ 4.373217] lirc_dev: IR Remote Control driver registered, major 248
[ 4.373611] IR LIRC bridge handler initialized
[ 4.373699] IR SANYO protocol handler initialized
[ 4.374741] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input7
[ 4.374852] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 4.398992] asus_wmi: ASUS WMI generic driver loaded
[ 4.399774] asus_wmi: Initialization: 0x0
[ 4.399800] asus_wmi: BIOS WMI version: 0.9
[ 4.399845] asus_wmi: SFUN value: 0x0
[ 4.400109] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
[ 4.503812] LNBx2x attached on addr=a
[ 4.505001] stv6110x_attach: Attaching STV6110x
[ 4.505004] attach tuner input 0 adr 60
[ 4.505008] DDBridge 0000:02:00.0: DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[ 4.512464] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: acl
[ 4.522351] e1000e 0000:00:19.0: irq 60 for MSI/MSI-X
[ 4.525553] RPC: Registered named UNIX socket transport module.
[ 4.525555] RPC: Registered udp transport module.
[ 4.525557] RPC: Registered tcp transport module.
[ 4.525558] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.528518] init: irexec main process (971) terminated with status 1
[ 4.528539] init: irexec main process ended, respawning
[ 4.529010] FS-Cache: Loaded
[ 4.531902] scsi 10:0:0:0: Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 4
[ 4.532563] sd 10:0:0:0: Attached scsi generic sg6 type 0
[ 4.533006] sd 10:0:0:0: [sdf] 31334400 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 4.533789] sd 10:0:0:0: [sdf] Write Protect is off
[ 4.533792] sd 10:0:0:0: [sdf] Mode Sense: 43 00 00 00
[ 4.534378] sd 10:0:0:0: [sdf] No Caching mode page present
[ 4.534381] sd 10:0:0:0: [sdf] Assuming drive cache: write through
[ 4.536857] FS-Cache: Netfs 'nfs' registered for caching
[ 4.537251] sd 10:0:0:0: [sdf] No Caching mode page present
[ 4.537254] sd 10:0:0:0: [sdf] Assuming drive cache: write through
[ 4.538132] sdf: sdf1
[ 4.538400] LNBx2x attached on addr=8
[ 4.538407] stv6110x_attach: Attaching STV6110x
[ 4.538408] attach tuner input 1 adr 63
[ 4.538411] DDBridge 0000:02:00.0: DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
[ 4.540872] sd 10:0:0:0: [sdf] No Caching mode page present
[ 4.540875] sd 10:0:0:0: [sdf] Assuming drive cache: write through
[ 4.540878] sd 10:0:0:0: [sdf] Attached SCSI removable disk
[ 4.547427] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.567448] Bluetooth: Core ver 2.16
[ 4.567463] NET: Registered protocol family 31
[ 4.567464] Bluetooth: HCI device and connection manager initialized
[ 4.567466] Bluetooth: HCI socket layer initialized
[ 4.567467] Bluetooth: L2CAP socket layer initialized
[ 4.567475] Bluetooth: SCO socket layer initialized
[ 4.569305] Bluetooth: RFCOMM TTY layer initialized
[ 4.569308] Bluetooth: RFCOMM socket layer initialized
[ 4.569310] Bluetooth: RFCOMM ver 1.11
[ 4.572067] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.572069] Bluetooth: BNEP filters: protocol multicast
[ 4.578216] e1000e 0000:00:19.0: irq 60 for MSI/MSI-X
[ 4.579175] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.582267] mceusb 2-1.1:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
[ 4.582271] mceusb 2-1.1:1.0: 2 tx ports (0x3 cabled) and 2 rx sensors (0x1 active)
[ 4.582299] usbcore: registered new interface driver mceusb
[ 4.601300] [drm] Initialized drm 1.1.0 20060810
[ 4.607967] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
[ 4.694309] LNBx2x attached on addr=b
[ 4.694319] stv6110x_attach: Attaching STV6110x
[ 4.694321] attach tuner input 6 adr 60
[ 4.694325] DDBridge 0000:02:00.0: DVB: registering adapter 2 frontend 0 (STV090x Multistandard)...
[ 4.720610] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 4.720615] IP: [< (null)>] (null)
[ 4.720618] PGD 404285067 PUD 404347067 PMD 0
[ 4.720621] Oops: 0010 [#1] SMP
[ 4.720624] CPU 7
[ 4.720625] Modules linked in: drm_kms_helper drm i2c_algo_bit bnep rfcomm bluetooth nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc stv6110x(O) lnbp21(O) nvidia(P+) eeepc_wmi asus_wmi sparse_keymap mxm_wmi ir_sanyo_decoder(O) ir_lirc_codec(O) lirc_dev(O) ir_jvc_decoder(O) ir_mce_kbd_decoder(O) ir_sony_decoder(O) ir_rc6_decoder(O) ir_rc5_decoder(O) ir_nec_decoder(O) snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm psmouse serio_raw snd_seq_midi rc_rc6_mce(O) stv090x(O) snd_rawmidi mceusb(O) rc_core(O) snd_seq_midi_event snd_seq snd_timer snd_seq_device joydev ddbridge(O+) dvb_core(O) snd cxd2099(O) soundcore snd_page_alloc video mei(C) mac_hid wmi w83627ehf hwmon_vid coretemp lp parport raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov usb_storage usbhid hid e1000e raid6_pq async_tx raid1 raid0 multipath linear vesafb
[ 4.720673]
[ 4.720676] Pid: 1167, comm: lircd Tainted: P C O 3.2.0-55-generic #85-Ubuntu System manufacturer System Product Name/P8Z68-V PRO GEN3
[ 4.720680] RIP: 0010:[<0000000000000000>] [< (null)>] (null)
[ 4.720683] RSP: 0018:ffff8803f7579ba0 EFLAGS: 00010246
[ 4.720684] RAX: 0000000000000000 RBX: ffff8803ffb1f400 RCX: 000000000f800000
[ 4.720686] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8803ffb1f400
[ 4.720688] RBP: ffff8803f7579bc8 R08: 0000000000000000 R09: 0000000000000000
[ 4.720690] R10: ffff88040dc71f00 R11: 0000000000000005 R12: ffff8803ffb1f6c8
[ 4.720692] R13: 0000000000000000 R14: ffff8803f77b6c00 R15: ffffffffa0df2040
[ 4.720694] FS: 00007f8f6834b740(0000) GS:ffff88041edc0000(0000) knlGS:0000000000000000
[ 4.720696] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4.720698] CR2: 0000000000000000 CR3: 00000003f9733000 CR4: 00000000001406e0
[ 4.720700] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4.720701] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 4.720704] Process lircd (pid: 1167, threadinfo ffff8803f7578000, task ffff880401ea9700)
[ 4.720705] Stack:
[ 4.720706] ffffffffa01ab129 ffff8803f7579bc8 00000000fffffff0 ffff88040429b700
[ 4.720710] ffff880403986f18 ffff8803f7579c28 ffffffffa0de636f ffff8803f7579c64
[ 4.720714] ffffffff8117e060 0000000000000000 000000000f800000 ffff8804030ca001
[ 4.720718] Call Trace:
[ 4.720724] [<ffffffffa01ab129>] ? rc_open+0x69/0x90 [rc_core]
[ 4.720729] [<ffffffffa0de636f>] lirc_dev_fop_open+0xbf/0x240 [lirc_dev]
[ 4.720734] [<ffffffff8117e060>] ? mount_fs+0x1b0/0x1b0
[ 4.720737] [<ffffffff8117eaa9>] chrdev_open+0xd9/0x250
[ 4.720741] [<ffffffff811781c0>] __dentry_open+0x2b0/0x380
[ 4.720744] [<ffffffff8117e9d0>] ? cdev_put+0x30/0x30
[ 4.720748] [<ffffffff8129fe4c>] ? security_inode_permission+0x1c/0x30
[ 4.720751] [<ffffffff81185f7a>] ? inode_permission+0x4a/0x110
[ 4.720754] [<ffffffff8117883d>] vfs_open+0x3d/0x40
[ 4.720757] [<ffffffff81179740>] nameidata_to_filp+0x40/0x50
[ 4.720759] [<ffffffff811887b8>] do_last+0x3f8/0x730
[ 4.720762] [<ffffffff81189e91>] path_openat+0xd1/0x3f0
[ 4.720765] [<ffffffff811857d5>] ? putname+0x35/0x50
[ 4.720768] [<ffffffff8118a233>] ? user_path_at_empty+0x63/0xa0
[ 4.720771] [<ffffffff8118a2d2>] do_filp_open+0x42/0xa0
[ 4.720775] [<ffffffff8131c751>] ? strncpy_from_user+0x31/0x40
[ 4.720778] [<ffffffff8118561a>] ? do_getname+0x10a/0x180
[ 4.720782] [<ffffffff816611ce>] ? _raw_spin_lock+0xe/0x20
[ 4.720785] [<ffffffff811975f7>] ? alloc_fd+0xf7/0x150
[ 4.720788] [<ffffffff81179848>] do_sys_open+0xf8/0x240
[ 4.720791] [<ffffffff811799b0>] sys_open+0x20/0x30
[ 4.720794] [<ffffffff81669802>] system_call_fastpath+0x16/0x1b
[ 4.720796] Code: Bad RIP value.
[ 4.720800] RIP [< (null)>] (null)
[ 4.720802] RSP <ffff8803f7579ba0>
[ 4.720804] CR2: 0000000000000000
[ 4.720806] ---[ end trace fb31bde34b36a1c1 ]---
[ 4.726855] input: lircd as /devices/virtual/input/input9
[ 4.730279] LNBx2x attached on addr=9
[ 4.730287] stv6110x_attach: Attaching STV6110x
[ 4.730288] attach tuner input 7 adr 63
[ 4.730292] DDBridge 0000:02:00.0: DVB: registering adapter 3 frontend 0 (STV090x Multistandard)...
[ 5.173757] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.197741] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.221725] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.245710] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 5.245774] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input10
[ 5.245848] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input11
[ 5.245910] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input12
[ 5.245972] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input13
[ 5.246312] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.246322] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.246326] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.246432] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
[ 6.043408] NVRM: Your system is not currently configured to drive a VGA console
[ 6.043411] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 6.043413] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 6.043415] NVRM: drivers including, but not limited to, vesafb, may result in
[ 6.043417] NVRM: corruption and stability problems, and is not supported.
[ 6.108826] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 6.113150] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=0
[ 6.130409] HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[ 6.137132] HDMI status: Codec=3 Pin=5 Presence_Detect=1 ELD_Valid=1
[ 6.904635] HDMI: detected monitor LG TV
[ 6.904636] at connection type HDMI
[ 6.904639] HDMI: available speakers: FL/FR LFE FC RL/RR RC RLC/RRC
[ 6.904644] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 6.904648] HDMI: supports coding type LPCM: channels = 8, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[ 6.904651] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[ 6.904655] HDMI: supports coding type DTS: channels = 7, rates = 32000 44100 48000 88200 96000, max bitrate = 1536000
[ 6.904657] HDMI: supports coding type DSD (One Bit Audio): channels = 6, rates = 44100
[ 6.904660] HDMI: supports coding type E-AC-3/DD+ (Dolby Digital Plus): channels = 8, rates = 44100 48000
[ 6.904663] HDMI: supports coding type MLP (Dolby TrueHD): channels = 8, rates = 48000 96000 192000
[ 6.904666] HDMI: supports coding type DTS-HD: channels = 8, rates = 48000 96000 192000
[ 7.445994] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 7.447101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.667041] init: wait-for-job-state (vdr-frontendvdr) main process (1194) killed by TERM signal
[ 17.501760] eth0: no IPv6 routers present
[ 32.104626] init: failsafe main process (1026) killed by TERM signal -
It might be caused by the kernel oops at [ 4.720621] but I have no idea why udev detects a lirc-device and tries to start lirc and lircd2uinput via /lib/udev/lircd_helper - if you don't use any lirc-devices you can simply delete this file.
Do you really need media-build-experimental-dkms? The TT-1600 cards should work using the kernel-drivers, too. -
-
I have the same failure but with another dvb card (TT S2-6400, Sundtek USB DVB-S2). I use YaVDR with different cards and mainboards but only my Zotac H77-ITX WiFi with Imon Pad with LCD Display and MCE USB remote control has this failure.
To solve this for me, I remove lircd2uinput in /etc/rc.local
Code
Alles anzeigenif [ -f /usr/bin/lircd2uinput ] ; then if [ ! -f /usr/bin/lircd2uinput.bak ] ; then mv /usr/bin/lircd2uinput /usr/bin/lircd2uinput.bak else cp -f /usr/bin/lircd2uinput /usr/bin/lircd2uinput.bak rm -f /usr/bin/lircd2uinput fi killall -9 lircd2uinput fi
Without lircd2uinput I have not kernel failure.
-
-
In welchem Paket steckt lircd_helper drinnen?
Im Paket für eventlircd. Aufgerufen wird der lircd_helper über die udev-Regel /lib/udev/rules.d/98-lircd.rules (https://github.com/yavdr/yavdr…aster/udev/98-lircd.rules)Wenn ich das richtig sehe springt die Regel bei jedem add bzw. remove Event an, das das Subsystem lirc oder usb hat.
Kannst du eventuell mal den Empfänger im laufen Betrieb anstecken und schauen, was dabei von udev geliefert wird?
-
Muss ich mal schauen, der Fehler tritt bei mir mit den Imon Displays auf der USB Stecker ist da im Gehäuse.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!