Hallo
Ich habe mal mein Kernel log dazu kopiert. Vielleicht kann wer was erkennen.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-15-generic (buildd@komainu) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #64-Ubuntu SMP Fri Jul 6 18:51:28 UTC 2012 (Ubuntu 2.6.38-15.64-generic 2.6.38.8)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-15-generic root=/dev/mapper/vdr-root ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffa0000 - 000000003ffb0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P5B-DE, BIOS P1.10 11/04/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3ffa0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003ffa0000
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003ffa0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3ffa0000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 36462000 - 37229000
[ 0.000000] ACPI: RSDP 00000000000fa9d0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000003ffa0000 00038 (v01 A M I OEMRSDT 11000904 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000003ffa0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000003ffa0440 05A31 (v01 AS268 AS268101 00000101 INTL 20051117)
[ 0.000000] ACPI: FACS 000000003ffb0000 00040
[ 0.000000] ACPI: APIC 000000003ffa0390 0006C (v01 A M I OEMAPIC 11000904 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000003ffa0400 0003C (v01 A M I OEMMCFG 11000904 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000003ffb0040 00061 (v01 A M I AMI_OEM 11000904 MSFT 00000097)
[ 0.000000] ACPI: AAFT 000000003ffa5e80 00027 (v01 A M I OEMAAFT 11000904 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003ffa0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000003ffa0000
[ 0.000000] NODE_DATA [000000003ff9b000 - 000000003ff9ffff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffa0
[ 0.000000] On node 0 totalpages: 261935
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3527 pages used for memmap
[ 0.000000] DMA32 zone: 254425 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s84416 r8192 d22080 u524288
[ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258346
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-15-generic root=/dev/mapper/vdr-root ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1005404k/1048192k available (5969k kernel code, 452k absent, 42336k reserved, 4989k data, 960k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 10485760 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1794.809 MHz processor.
[ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3589.61 BogoMIPS (lpj=17948090)
[ 0.010010] pid_max: default: 32768 minimum: 301
[ 0.010045] Security Framework initialized
[ 0.010069] AppArmor: AppArmor initialized
[ 0.010071] Yama: becoming mindful.
[ 0.010270] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.010926] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.011239] Mount-cache hash table entries: 256
[ 0.011430] Initializing cgroup subsys ns
[ 0.011436] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.011439] Initializing cgroup subsys cpuacct
[ 0.011444] Initializing cgroup subsys memory
[ 0.011455] Initializing cgroup subsys devices
[ 0.011457] Initializing cgroup subsys freezer
[ 0.011460] Initializing cgroup subsys net_cls
[ 0.011462] Initializing cgroup subsys blkio
[ 0.011509] mce: CPU supports 6 MCE banks
[ 0.011519] CPU0: Thermal monitoring enabled (TM2)
[ 0.011524] using mwait in idle threads.
[ 0.011558] SMP alternatives: switching to UP code
[ 0.022516] ACPI: Core revision 20110112
[ 0.030022] ftrace: allocating 24407 entries in 96 pages
[ 0.040078] Setting APIC routing to flat
[ 0.040386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.140785] CPU0: Intel(R) Celeron(R) CPU 430 @ 1.80GHz stepping 01
[ 0.150000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.150000] ... version: 2
[ 0.150000] ... bit width: 40
[ 0.150000] ... generic registers: 2
[ 0.150000] ... value mask: 000000ffffffffff
[ 0.150000] ... max period: 000000007fffffff
[ 0.150000] ... fixed-purpose events: 3
[ 0.150000] ... event mask: 0000000700000003
[ 0.150000] Brought up 1 CPUs
[ 0.150000] Total of 1 processors activated (3589.61 BogoMIPS).
[ 0.150000] devtmpfs: initialized
[ 0.150000] print_constraints: dummy:
[ 0.150000] Time: 7:37:20 Date: 12/18/12
[ 0.150000] NET: Registered protocol family 16
[ 0.150000] ACPI: bus type pci registered
[ 0.150000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.150000] PCI: not using MMCONFIG
[ 0.150000] PCI: Using configuration type 1 for base access
[ 0.150000] bio: create slab <bio-0> at 0
[ 0.150000] ACPI: EC: Look up EC in DSDT
[ 0.150000] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.150000] ACPI: Interpreter enabled
[ 0.150000] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.150000] ACPI: Using IOAPIC for interrupt routing
[ 0.150000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.150907] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.167412] ACPI: No dock devices found.
[ 0.167416] HEST: Table not found.
[ 0.167420] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.167621] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.167816] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.167820] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.167823] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.167826] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.167828] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff]
[ 0.167845] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
[ 0.167897] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
[ 0.167933] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.167937] pci 0000:00:01.0: PME# disabled
[ 0.167976] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.168018] pci 0000:00:1a.0: reg 20: [io 0xc880-0xc89f]
[ 0.168049] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.168091] pci 0000:00:1a.1: reg 20: [io 0xcc00-0xcc1f]
[ 0.168133] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.168153] pci 0000:00:1a.7: reg 10: [mem 0xfceffc00-0xfcefffff]
[ 0.168224] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.168229] pci 0000:00:1a.7: PME# disabled
[ 0.168251] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.168267] pci 0000:00:1b.0: reg 10: [mem 0xfcef8000-0xfcefbfff 64bit]
[ 0.168324] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.168328] pci 0000:00:1b.0: PME# disabled
[ 0.168348] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.168405] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.168409] pci 0000:00:1c.0: PME# disabled
[ 0.168432] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
[ 0.168489] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.168493] pci 0000:00:1c.2: PME# disabled
[ 0.168517] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.168558] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f]
[ 0.168593] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.168634] pci 0000:00:1d.1: reg 20: [io 0xc480-0xc49f]
[ 0.168666] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.168707] pci 0000:00:1d.2: reg 20: [io 0xc800-0xc81f]
[ 0.168748] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.168768] pci 0000:00:1d.7: reg 10: [mem 0xfceff800-0xfceffbff]
[ 0.168839] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.168844] pci 0000:00:1d.7: PME# disabled
[ 0.168862] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.168921] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.169004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
[ 0.169042] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
[ 0.169057] pci 0000:00:1f.2: reg 10: [io 0xb080-0xb087]
[ 0.169066] pci 0000:00:1f.2: reg 14: [io 0xb000-0xb003]
[ 0.169075] pci 0000:00:1f.2: reg 18: [io 0xac00-0xac07]
[ 0.169083] pci 0000:00:1f.2: reg 1c: [io 0xa880-0xa883]
[ 0.169092] pci 0000:00:1f.2: reg 20: [io 0xa800-0xa80f]
[ 0.169101] pci 0000:00:1f.2: reg 24: [io 0xa480-0xa48f]
[ 0.169124] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.169128] pci 0000:00:1f.2: PME# disabled
[ 0.169142] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.169154] pci 0000:00:1f.3: reg 10: [mem 0xfceff400-0xfceff4ff]
[ 0.169183] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.169216] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
[ 0.169231] pci 0000:00:1f.5: reg 10: [io 0xc080-0xc087]
[ 0.169240] pci 0000:00:1f.5: reg 14: [io 0xc000-0xc003]
[ 0.169248] pci 0000:00:1f.5: reg 18: [io 0xbc00-0xbc07]
[ 0.169257] pci 0000:00:1f.5: reg 1c: [io 0xb880-0xb883]
[ 0.169266] pci 0000:00:1f.5: reg 20: [io 0xb800-0xb80f]
[ 0.169275] pci 0000:00:1f.5: reg 24: [io 0xb480-0xb48f]
[ 0.169298] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.169302] pci 0000:00:1f.5: PME# disabled
[ 0.169353] pci 0000:04:00.0: [10de:0a65] type 0 class 0x000300
[ 0.169364] pci 0000:04:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.169377] pci 0000:04:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.169388] pci 0000:04:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.169397] pci 0000:04:00.0: reg 24: [io 0xec00-0xec7f]
[ 0.169405] pci 0000:04:00.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.169451] pci 0000:04:00.1: [10de:0be3] type 0 class 0x000403
[ 0.169462] pci 0000:04:00.1: reg 10: [mem 0xfebfc000-0xfebfffff]
[ 0.169549] pci 0000:00:01.0: PCI bridge to [bus 04-04]
[ 0.169553] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.169557] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.169562] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
[ 0.169625] pci 0000:02:00.0: [9710:9990] type 0 class 0x000c03
[ 0.169646] pci 0000:02:00.0: reg 10: [mem 0xfcff8000-0xfcff8fff]
[ 0.169766] pci 0000:02:00.0: supports D1 D2
[ 0.169769] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169775] pci 0000:02:00.0: PME# disabled
[ 0.169817] pci 0000:02:00.1: [9710:9990] type 0 class 0x000c03
[ 0.169838] pci 0000:02:00.1: reg 10: [mem 0xfcff9000-0xfcff9fff]
[ 0.169958] pci 0000:02:00.1: supports D1 D2
[ 0.169961] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169967] pci 0000:02:00.1: PME# disabled
[ 0.170026] pci 0000:02:00.2: [9710:9990] type 0 class 0x000c03
[ 0.170047] pci 0000:02:00.2: reg 10: [mem 0xfcffa000-0xfcffafff]
[ 0.170167] pci 0000:02:00.2: supports D1 D2
[ 0.170169] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170175] pci 0000:02:00.2: PME# disabled
[ 0.170217] pci 0000:02:00.3: [9710:9990] type 0 class 0x000c03
[ 0.170238] pci 0000:02:00.3: reg 10: [mem 0xfcffb000-0xfcffbfff]
[ 0.170358] pci 0000:02:00.3: supports D1 D2
[ 0.170360] pci 0000:02:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170367] pci 0000:02:00.3: PME# disabled
[ 0.170408] pci 0000:02:00.4: [9710:9990] type 0 class 0x000c03
[ 0.170429] pci 0000:02:00.4: reg 10: [mem 0xfcffc000-0xfcffcfff]
[ 0.170549] pci 0000:02:00.4: supports D1 D2
[ 0.170551] pci 0000:02:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170557] pci 0000:02:00.4: PME# disabled
[ 0.170598] pci 0000:02:00.5: [9710:9990] type 0 class 0x000c03
[ 0.170618] pci 0000:02:00.5: reg 10: [mem 0xfcffd000-0xfcffdfff]
[ 0.170739] pci 0000:02:00.5: supports D1 D2
[ 0.170741] pci 0000:02:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170747] pci 0000:02:00.5: PME# disabled
[ 0.170792] pci 0000:02:00.6: [9710:9990] type 0 class 0x000c03
[ 0.170812] pci 0000:02:00.6: reg 10: [mem 0xfcffe000-0xfcffefff]
[ 0.170933] pci 0000:02:00.6: supports D1 D2
[ 0.170935] pci 0000:02:00.6: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170941] pci 0000:02:00.6: PME# disabled
[ 0.170982] pci 0000:02:00.7: [9710:9990] type 0 class 0x000c03
[ 0.171003] pci 0000:02:00.7: reg 10: [mem 0xfcfff000-0xfcffffff]
[ 0.171123] pci 0000:02:00.7: supports D1 D2
[ 0.171126] pci 0000:02:00.7: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.171132] pci 0000:02:00.7: PME# disabled
[ 0.190059] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.190064] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.190069] pci 0000:00:1c.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.190075] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.190141] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.190159] pci 0000:01:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.190188] pci 0000:01:00.0: reg 18: [mem 0xddfff000-0xddffffff 64bit pref]
[ 0.190207] pci 0000:01:00.0: reg 20: [mem 0xddff8000-0xddffbfff 64bit pref]
[ 0.190258] pci 0000:01:00.0: supports D1 D2
[ 0.190261] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.190266] pci 0000:01:00.0: PME# disabled
[ 0.210015] pci 0000:00:1c.2: PCI bridge to [bus 01-01]
[ 0.210020] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.210025] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.210031] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.210095] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.210100] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.210105] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.210111] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.210115] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.210118] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.210121] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.210124] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.210127] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[ 0.210150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.210274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.210314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.210438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.210481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.210633] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.210814] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.219391] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.219453] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.219509] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.219565] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.219622] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219679] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.219734] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.219790] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.219942] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.219950] vgaarb: loaded
[ 0.220191] SCSI subsystem initialized
[ 0.220267] libata version 3.00 loaded.
[ 0.220325] usbcore: registered new interface driver usbfs
[ 0.220338] usbcore: registered new interface driver hub
[ 0.220379] usbcore: registered new device driver usb
[ 0.220521] wmi: Mapper loaded
[ 0.220523] PCI: Using ACPI for IRQ routing
[ 0.220527] PCI: pci_cache_line_size set to 64 bytes
[ 0.220643] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.220646] reserve RAM buffer: 000000003ffa0000 - 000000003fffffff
[ 0.220767] NetLabel: Initializing
[ 0.220769] NetLabel: domain hash size = 128
[ 0.220771] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.220784] NetLabel: unlabeled traffic allowed by default
[ 0.228805] AppArmor: AppArmor Filesystem Enabled
[ 0.228842] pnp: PnP ACPI init
[ 0.228862] ACPI: bus type pnp registered
[ 0.228980] pnp 00:00: [bus 00-ff]
[ 0.228983] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.228991] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.228994] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.228996] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.228999] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.229002] pnp 00:00: [mem 0x40000000-0xffffffff window]
[ 0.229067] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.229080] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.229155] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.229160] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.229214] pnp 00:02: [dma 4]
[ 0.229216] pnp 00:02: [io 0x0000-0x000f]
[ 0.229219] pnp 00:02: [io 0x0081-0x0083]
[ 0.229221] pnp 00:02: [io 0x0087]
[ 0.229223] pnp 00:02: [io 0x0089-0x008b]
[ 0.229225] pnp 00:02: [io 0x008f]
[ 0.229227] pnp 00:02: [io 0x00c0-0x00df]
[ 0.229261] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.229275] pnp 00:03: [io 0x0070-0x0071]
[ 0.229288] pnp 00:03: [irq 8]
[ 0.229324] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.229340] pnp 00:04: [io 0x0061]
[ 0.229370] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.229382] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.229389] pnp 00:05: [irq 13]
[ 0.229426] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.230136] pnp 00:06: [io 0x0378-0x037f]
[ 0.230139] pnp 00:06: [io 0x0778-0x077f]
[ 0.230148] pnp 00:06: [irq 7]
[ 0.230150] pnp 00:06: [dma 3]
[ 0.230334] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.230443] pnp 00:07: [io 0x0010-0x001f]
[ 0.230447] pnp 00:07: [io 0x0022-0x003f]
[ 0.230449] pnp 00:07: [io 0x0044-0x005f]
[ 0.230451] pnp 00:07: [io 0x0062-0x0063]
[ 0.230457] pnp 00:07: [io 0x0065-0x006f]
[ 0.230459] pnp 00:07: [io 0x0072-0x007f]
[ 0.230461] pnp 00:07: [io 0x0080]
[ 0.230463] pnp 00:07: [io 0x0084-0x0086]
[ 0.230465] pnp 00:07: [io 0x0088]
[ 0.230467] pnp 00:07: [io 0x008c-0x008e]
[ 0.230469] pnp 00:07: [io 0x0090-0x009f]
[ 0.230471] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.230474] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.230476] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.230478] pnp 00:07: [io 0x0800-0x087f]
[ 0.230480] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.230483] pnp 00:07: [io 0x0480-0x04bf]
[ 0.230485] pnp 00:07: [io 0x0900-0x090f]
[ 0.230487] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.230489] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[ 0.230586] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.230589] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.230593] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.230596] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.230600] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.230603] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.230607] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230711] pnp 00:08: [mem 0xffb80000-0xffbfffff]
[ 0.230714] pnp 00:08: [mem 0xfff80000-0xffffffff]
[ 0.230753] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.230808] pnp 00:09: [mem 0xffc00000-0xfff7ffff]
[ 0.230877] system 00:09: [mem 0xffc00000-0xfff7ffff] has been reserved
[ 0.230882] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.230949] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.230952] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.231017] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.231021] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.231025] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231071] pnp 00:0b: [io 0x0060]
[ 0.231073] pnp 00:0b: [io 0x0064]
[ 0.231082] pnp 00:0b: [irq 1]
[ 0.231122] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.231436] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.231445] pnp 00:0c: [irq 4]
[ 0.231447] pnp 00:0c: [dma 0 disabled]
[ 0.231533] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.231644] pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
[ 0.231647] pnp 00:0d: [io 0x0280-0x028f]
[ 0.231649] pnp 00:0d: [io 0x0290-0x029f]
[ 0.231719] system 00:0d: [io 0x0280-0x028f] has been reserved
[ 0.231723] system 00:0d: [io 0x0290-0x029f] has been reserved
[ 0.231727] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231784] pnp 00:0e: [mem 0xf0000000-0xf3ffffff]
[ 0.231853] system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.231858] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232083] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.232091] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.232094] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.232096] pnp 00:0f: [mem 0x00100000-0x3fffffff]
[ 0.232099] pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.232184] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.232188] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.232192] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.232195] system 00:0f: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.232199] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.232369] pnp: PnP ACPI: found 16 devices
[ 0.232371] ACPI: ACPI bus type pnp unregistered
[ 0.239369] Switching to clocksource acpi_pm
[ 0.239448] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.239453] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40200000-0x405fffff]
[ 0.239457] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.239461] pci 0000:00:01.0: PCI bridge to [bus 04-04]
[ 0.239464] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.239469] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
[ 0.239473] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
[ 0.239479] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.239482] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.239487] pci 0000:00:1c.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.239492] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.239498] pci 0000:00:1c.2: PCI bridge to [bus 01-01]
[ 0.239501] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.239507] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x405fffff]
[ 0.239511] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.239518] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.239520] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.239525] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.239529] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.239557] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.239561] pci 0000:00:01.0: setting latency timer to 64
[ 0.239568] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.239575] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.239580] pci 0000:00:1c.0: setting latency timer to 64
[ 0.239590] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.239594] pci 0000:00:1c.2: setting latency timer to 64
[ 0.239601] pci 0000:00:1e.0: setting latency timer to 64
[ 0.239605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.239608] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.239611] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.239614] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.239616] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffffffff]
[ 0.239619] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.239621] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfebfffff]
[ 0.239624] pci_bus 0000:04: resource 2 [mem 0xde000000-0xefffffff 64bit pref]
[ 0.239627] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.239630] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.239632] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.239635] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.239638] pci_bus 0000:01: resource 1 [mem 0x40200000-0x405fffff]
[ 0.239641] pci_bus 0000:01: resource 2 [mem 0xddf00000-0xddffffff 64bit pref]
[ 0.239643] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.239646] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.239648] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.239651] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.239654] pci_bus 0000:03: resource 8 [mem 0x40000000-0xffffffff]
[ 0.239697] NET: Registered protocol family 2
[ 0.239794] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.239794] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.239794] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.239794] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.239794] TCP reno registered
[ 0.239794] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.239794] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.239794] NET: Registered protocol family 1
[ 0.239794] pci 0000:04:00.0: Boot video device
[ 0.239794] PCI: CLS 32 bytes, default 64
[ 0.239794] audit: initializing netlink socket (disabled)
[ 0.239794] type=2000 audit(1355816240.230:1): initialized
[ 0.250111] Trying to unpack rootfs image as initramfs...
[ 0.270542] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.272582] VFS: Disk quotas dquot_6.5.2
[ 0.272653] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.273420] fuse init (API version 7.16)
[ 0.273550] msgmni has been set to 1963
[ 0.280552] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.280596] io scheduler noop registered
[ 0.280598] io scheduler deadline registered
[ 0.280653] io scheduler cfq registered (default)
[ 0.280797] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.280834] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.280918] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.280958] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.281061] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.281100] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.281235] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.281239] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.281241] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
[ 0.281245] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.281268] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.281270] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.281273] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.281275] pci 0000:02:00.2: Signaling PME through PCIe PME interrupt
[ 0.281277] pci 0000:02:00.3: Signaling PME through PCIe PME interrupt
[ 0.281280] pci 0000:02:00.4: Signaling PME through PCIe PME interrupt
[ 0.281282] pci 0000:02:00.5: Signaling PME through PCIe PME interrupt
[ 0.281284] pci 0000:02:00.6: Signaling PME through PCIe PME interrupt
[ 0.281286] pci 0000:02:00.7: Signaling PME through PCIe PME interrupt
[ 0.281291] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.281310] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.281313] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.281317] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.281337] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.281384] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 1849 ss_did 283f
[ 0.281407] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.281419] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 1849 ss_did 2843
[ 0.281445] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.281453] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.281505] intel_idle: MWAIT substates: 0x220
[ 0.281507] intel_idle: does not run on family 6 model 22
[ 0.281613] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.281619] ACPI: Power Button [PWRB]
[ 0.281677] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.281681] ACPI: Power Button [PWRF]
[ 0.281865] ACPI: acpi_idle registered with cpuidle
[ 0.284027] ERST: Table is not found!
[ 0.284127] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.304668] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.351946] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.370490] Linux agpgart interface v0.103
[ 0.371962] brd: module loaded
[ 0.372629] loop: module loaded
[ 0.372765] i2c-core: driver [adp5520] using legacy suspend method
[ 0.372768] i2c-core: driver [adp5520] using legacy resume method
[ 0.372897] ata_piix 0000:00:1f.2: version 2.13
[ 0.372926] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.372932] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.530321] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.540227] scsi0 : ata_piix
[ 0.540403] scsi1 : ata_piix
[ 0.541817] ata1: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 19
[ 0.541823] ata2: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 19
[ 0.541903] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.541908] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.541954] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.542242] scsi2 : ata_piix
[ 0.542370] scsi3 : ata_piix
[ 0.543635] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19
[ 0.543641] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19
[ 0.544030] Fixed MDIO Bus: probed
[ 0.544069] PPP generic driver version 2.4.2
[ 0.544145] tun: Universal TUN/TAP device driver, 1.6
[ 0.544147] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.544276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.544304] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.544327] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.544331] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.544380] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.544419] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.548311] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.548333] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfceffc00
[ 0.580059] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.580237] hub 1-0:1.0: USB hub found
[ 0.580244] hub 1-0:1.0: 4 ports detected
[ 0.580343] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.580367] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.580371] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.580446] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.580486] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.584355] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.584378] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfceff800
[ 0.600160] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.600363] hub 2-0:1.0: USB hub found
[ 0.600369] hub 2-0:1.0: 6 ports detected
[ 0.600462] ehci_hcd 0000:02:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.600487] ehci_hcd 0000:02:00.1: setting latency timer to 64
[ 0.600492] ehci_hcd 0000:02:00.1: EHCI Host Controller
[ 0.600565] ehci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 3
[ 0.630248] ehci_hcd 0000:02:00.1: irq 16, io mem 0xfcff9000
[ 0.650165] ehci_hcd 0000:02:00.1: USB 2.0 started, EHCI 1.00
[ 0.650359] hub 3-0:1.0: USB hub found
[ 0.650365] hub 3-0:1.0: 1 port detected
[ 0.650450] ehci_hcd 0000:02:00.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.650476] ehci_hcd 0000:02:00.3: setting latency timer to 64
[ 0.650481] ehci_hcd 0000:02:00.3: EHCI Host Controller
[ 0.650541] ehci_hcd 0000:02:00.3: new USB bus registered, assigned bus number 4
[ 0.664909] Freeing initrd memory: 14108k freed
[ 0.680117] ehci_hcd 0000:02:00.3: irq 17, io mem 0xfcffb000
[ 0.700036] ehci_hcd 0000:02:00.3: USB 2.0 started, EHCI 1.00
[ 0.700232] hub 4-0:1.0: USB hub found
[ 0.700239] hub 4-0:1.0: 1 port detected
[ 0.700333] ehci_hcd 0000:02:00.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.700356] ehci_hcd 0000:02:00.5: setting latency timer to 64
[ 0.700361] ehci_hcd 0000:02:00.5: EHCI Host Controller
[ 0.700423] ehci_hcd 0000:02:00.5: new USB bus registered, assigned bus number 5
[ 0.730029] ehci_hcd 0000:02:00.5: irq 18, io mem 0xfcffd000
[ 0.750038] ehci_hcd 0000:02:00.5: USB 2.0 started, EHCI 1.00
[ 0.750180] hub 5-0:1.0: USB hub found
[ 0.750186] hub 5-0:1.0: 1 port detected
[ 0.750264] ehci_hcd 0000:02:00.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.750282] ehci_hcd 0000:02:00.7: setting latency timer to 64
[ 0.750286] ehci_hcd 0000:02:00.7: EHCI Host Controller
[ 0.750345] ehci_hcd 0000:02:00.7: new USB bus registered, assigned bus number 6
[ 0.780042] ehci_hcd 0000:02:00.7: irq 19, io mem 0xfcfff000
[ 0.800050] ehci_hcd 0000:02:00.7: USB 2.0 started, EHCI 1.00
[ 0.800192] hub 6-0:1.0: USB hub found
[ 0.800198] hub 6-0:1.0: 1 port detected
[ 0.800277] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.800300] ohci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.800319] ohci_hcd 0000:02:00.0: setting latency timer to 64
[ 0.800324] ohci_hcd 0000:02:00.0: OHCI Host Controller
[ 0.800382] ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 7
[ 0.800406] ohci_hcd 0000:02:00.0: irq 16, io mem 0xfcff8000
[ 0.864239] hub 7-0:1.0: USB hub found
[ 0.864248] hub 7-0:1.0: 1 port detected
[ 0.864329] ohci_hcd 0000:02:00.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.864348] ohci_hcd 0000:02:00.2: setting latency timer to 64
[ 0.864353] ohci_hcd 0000:02:00.2: OHCI Host Controller
[ 0.864417] ohci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 8
[ 0.864440] ohci_hcd 0000:02:00.2: irq 17, io mem 0xfcffa000
[ 0.910772] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.924194] hub 8-0:1.0: USB hub found
[ 0.924203] hub 8-0:1.0: 1 port detected
[ 0.924286] ohci_hcd 0000:02:00.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.924306] ohci_hcd 0000:02:00.4: setting latency timer to 64
[ 0.924311] ohci_hcd 0000:02:00.4: OHCI Host Controller
[ 0.924370] ohci_hcd 0000:02:00.4: new USB bus registered, assigned bus number 9
[ 0.924393] ohci_hcd 0000:02:00.4: irq 18, io mem 0xfcffc000
[ 0.984171] hub 9-0:1.0: USB hub found
[ 0.984180] hub 9-0:1.0: 1 port detected
[ 0.984260] ohci_hcd 0000:02:00.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.984280] ohci_hcd 0000:02:00.6: setting latency timer to 64
[ 0.984284] ohci_hcd 0000:02:00.6: OHCI Host Controller
[ 0.984347] ohci_hcd 0000:02:00.6: new USB bus registered, assigned bus number 10
[ 0.984370] ohci_hcd 0000:02:00.6: irq 19, io mem 0xfcffe000
[ 1.044196] hub 10-0:1.0: USB hub found
[ 1.044205] hub 10-0:1.0: 1 port detected
[ 1.044283] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.044373] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.044382] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.044386] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.044455] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 11
[ 1.044485] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
[ 1.044639] hub 11-0:1.0: USB hub found
[ 1.044645] hub 11-0:1.0: 2 ports detected
[ 1.044734] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.044743] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.044747] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.044822] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 12
[ 1.044862] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000cc00
[ 1.045014] hub 12-0:1.0: USB hub found
[ 1.045020] hub 12-0:1.0: 2 ports detected
[ 1.045097] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.045105] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.045109] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.045171] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 13
[ 1.045200] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 1.045348] hub 13-0:1.0: USB hub found
[ 1.045354] hub 13-0:1.0: 2 ports detected
[ 1.045430] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.045438] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.045441] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.045504] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 14
[ 1.045533] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[ 1.045687] hub 14-0:1.0: USB hub found
[ 1.045693] hub 14-0:1.0: 2 ports detected
[ 1.045767] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.045774] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.045778] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.045842] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 15
[ 1.045871] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[ 1.046025] hub 15-0:1.0: USB hub found
[ 1.046033] hub 15-0:1.0: 2 ports detected
[ 1.046179] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.046181] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.046684] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.046850] mousedev: PS/2 mouse device common for all mice
[ 1.047032] rtc_cmos 00:03: RTC can wake from S4
[ 1.047094] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.047120] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.047262] device-mapper: uevent: version 1.0.3
[ 1.047366] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.047452] device-mapper: multipath: version 1.2.0 loaded
[ 1.047455] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.047596] cpuidle: using governor ladder
[ 1.047599] cpuidle: using governor menu
[ 1.047846] TCP cubic registered
[ 1.048000] NET: Registered protocol family 10
[ 1.048544] NET: Registered protocol family 17
[ 1.048574] Registering the dns_resolver key type
[ 1.048773] registered taskstats version 1
[ 1.049217] Magic number: 8:710:622
[ 1.049340] rtc_cmos 00:03: setting system clock to 2012-12-18 07:37:21 UTC (1355816241)
[ 1.049344] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.049345] EDD information not available.
[ 1.070056] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.091410] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 1.091414] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.110428] ata3.00: configured for UDMA/133
[ 1.150022] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 1.250023] Refined TSC clocksource calibration: 1795.029 MHz.
[ 1.250029] Switching to clocksource tsc
[ 1.400060] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.400072] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 1.400189] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.400202] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 1.400212] ata2.01: link offline, clearing class 3 to NONE
[ 1.420274] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX01, max UDMA/100
[ 1.420413] ata1.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 1.420416] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.440433] ata1.00: configured for UDMA/133
[ 1.440567] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00M 51.0 PQ: 0 ANSI: 5
[ 1.440762] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.440887] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.440891] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.440961] sd 0:0:0:0: [sda] Write Protect is off
[ 1.440965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.440996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.460162] ata2.00: configured for UDMA/100
[ 1.466481] sda: sda1 sda2 < sda5 >
[ 1.466836] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.468631] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX01 PQ: 0 ANSI: 5
[ 1.477175] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.477179] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.477311] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.477404] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.477566] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 1.477735] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.477843] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.477846] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.477915] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.477919] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.477950] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.494388] sdb: sdb1
[ 1.494658] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.496810] Freeing unused kernel memory: 960k freed
[ 1.497271] Write protecting the kernel read-only data: 10240k
[ 1.498095] Freeing unused kernel memory: 156k freed
[ 1.504391] Freeing unused kernel memory: 1432k freed
[ 1.532951] <30>udev[67]: starting version 167
[ 1.578264] vesafb: framebuffer at 0xdf000000, mapped to 0xffffc90004580000, using 3072k, total 3072k
[ 1.578268] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 1.578270] vesafb: scrolling: redraw
[ 1.578273] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.578416] Console: switching to colour frame buffer device 128x48
[ 1.578439] fb0: VESA VGA frame buffer device
[ 1.580099] usb 4-1: new high speed USB device using ehci_hcd and address 2
[ 1.796245] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.796270] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.796312] r8169 0000:01:00.0: setting latency timer to 64
[ 1.796371] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 1.796865] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc900001a8000, bc:5f:f4:0c:76:ed, XID 081000c0 IRQ 43
[ 1.850039] usb 14-1: new low speed USB device using uhci_hcd and address 2
[ 2.183552] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 2.234999] input: 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb14/14-1/14-1:1.0/input/input2
[ 2.235124] generic-usb 0003:04D9:2519.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Wireless Touchpad Keyboard] on usb-0000:00:1d.1-1/input0
[ 2.305247] input: 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb14/14-1/14-1:1.1/input/input3
[ 2.305404] generic-usb 0003:04D9:2519.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Wireless Touchpad Keyboard] on usb-0000:00:1d.1-1/input1
[ 2.305427] usbcore: registered new interface driver usbhid
[ 2.305429] usbhid: USB HID core driver
[ 11.310351] <30>udev[304]: starting version 167
[ 11.390978] lp: driver loaded but no devices found
[ 11.442895] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 11.852206] EXT3-fs: barriers not enabled
[ 12.181642] parport_pc 00:06: reported by Plug and Play ACPI
[ 12.181697] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 12.262546] kjournald starting. Commit interval 5 seconds
[ 12.263065] EXT3-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[ 12.263657] EXT3-fs (sdb1): using internal journal
[ 12.263665] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 12.353080] lp0: using parport0 (interrupt-driven).
[ 12.417605] nvidia: module license 'NVIDIA' taints kernel.
[ 12.417611] Disabling lock debugging due to kernel taint
[ 12.524868] lirc_dev: IR Remote Control driver registered, major 250
[ 12.528104] RPC: Registered udp transport module.
[ 12.528108] RPC: Registered tcp transport module.
[ 12.528110] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.581824] lirc_serial: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.896349] FS-Cache: Loaded
[ 12.940947] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.940961] nvidia 0000:04:00.0: setting latency timer to 64
[ 12.940967] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.960049] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012
[ 13.167078] FS-Cache: Netfs 'nfs' registered for caching
[ 13.217410] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.276816] WARNING: You are using an experimental version of the media stack.
[ 13.276819] As the driver is backported to an older kernel, it doesn't offer
[ 13.276820] enough quality for its usage in production.
[ 13.276821] Use it with care.
[ 13.276822] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 13.276823] 875e2e3edf48a206c64195666cf408dd3d119137 [media] omap3isp: Mark next captured frame as faulty when an SBL overflow occurs
[ 13.276825] c3cd257402fdcd650816ec25b83480a24912430a [media] omap3isp: video: Don't WARN() on unknown pixel formats
[ 13.276827] 22db44cb9cd67d56b02b2b5dceb10d3d1361b28b [media] as3645a: Add driver for LED flash controller
[ 13.295189] IR NEC protocol handler initialized
[ 13.302176] IR RC5(x) protocol handler initialized
[ 13.321641] IR RC6 protocol handler initialized
[ 13.325647] IR JVC protocol handler initialized
[ 13.732977] IR Sony protocol handler initialized
[ 13.733324] WARNING: You are using an experimental version of the media stack.
[ 13.733327] As the driver is backported to an older kernel, it doesn't offer
[ 13.733328] enough quality for its usage in production.
[ 13.733329] Use it with care.
[ 13.733330] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org
[ 13.733331] 875e2e3edf48a206c64195666cf408dd3d119137 [media] omap3isp: Mark next captured frame as faulty when an SBL overflow occurs
[ 13.733333] c3cd257402fdcd650816ec25b83480a24912430a [media] omap3isp: video: Don't WARN() on unknown pixel formats
[ 13.733334] 22db44cb9cd67d56b02b2b5dceb10d3d1361b28b [media] as3645a: Add driver for LED flash controller
[ 13.745162] IR MCE Keyboard/mouse protocol handler initialized
[ 13.755214] IR LIRC bridge handler initialized
[ 13.850207] lirc_serial: auto-detected active low receiver
[ 13.856700] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
[ 13.863108] input: lircd as /devices/virtual/input/input4
[ 13.897296] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to load a firmware
[ 14.157630] r8169 0000:01:00.0: eth0: link down
[ 14.157639] r8169 0000:01:00.0: eth0: link down
[ 14.158062] input: eventlircd as /devices/virtual/input/input5
[ 14.159140] Adding 1044476k swap on /dev/mapper/vdr-swap_1. Priority:-1 extents:1 across:1044476k
[ 14.190062] ppdev: user-space parallel port driver
[ 14.225034] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.300165] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 14.300170] dw2102: start downloading DW210X firmware
[ 14.546348] usb 3-1: USB disconnect, address 2
[ 14.881055] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[ 14.881414] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 14.881443] DVB: registering new adapter (TeVii S480.1 USB)
[ 14.881675] dvb-usb: MAC address: 50:50:50:50:50:50
[ 14.972513] Invalid probe, probably not a DS3000
[ 14.972890] dvb-usb: no frontend was attached by 'TeVii S480.1 USB'
[ 14.978031] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/usb3/3-1/input/input6
[ 14.978710] dvb-usb: schedule remote query interval to 150 msecs.
[ 14.978717] dvb-usb: TeVii S480.1 USB successfully initialized and connected.
[ 14.979136] dvb-usb: TeVii S480.1 USB successfully deinitialized and disconnected.
[ 14.982812] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to load a firmware
[ 15.253182] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 15.253187] dw2102: start downloading DW210X firmware
[ 15.371651] usb 4-1: USB disconnect, address 2
[ 15.473231] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[ 15.473636] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 15.473665] DVB: registering new adapter (TeVii S480.2 USB)
[ 15.473897] dvb-usb: MAC address: 28:28:28:28:28:28
[ 15.481731] Invalid probe, probably not a DS3000
[ 15.482108] dvb-usb: no frontend was attached by 'TeVii S480.2 USB'
[ 15.485531] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.3/usb4/4-1/input/input7
[ 15.486024] dvb-usb: schedule remote query interval to 150 msecs.
[ 15.486032] dvb-usb: TeVii S480.2 USB successfully initialized and connected.
[ 15.486461] dvb-usb: TeVii S480.2 USB successfully deinitialized and disconnected.
[ 15.488958] usbcore: registered new interface driver dw2102
[ 15.775683] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.775741] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 15.775771] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.940435] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.940440] hda_intel: Disable MSI for Nvidia chipset
[ 15.940474] HDA Intel 0000:04:00.1: setting latency timer to 64
[ 16.143066] svc: failed to register lockdv1 RPC service (errno 97).
[ 16.145957] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 16.149644] NFSD: starting 90-second grace period
[ 16.340088] usb 3-1: new high speed USB device using ehci_hcd and address 3
[ 16.342485] r8169 0000:01:00.0: eth0: link up
[ 16.342627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.491307] usb 3-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[ 16.493488] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 16.503590] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 16.503593] dw2102: start downloading DW210X firmware
[ 16.660084] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 16.660169] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 16.660868] DVB: registering new adapter (TeVii S660 USB)
[ 17.038758] dvb-usb: MAC address: 00:18:bd:5a:d9:c8
[ 17.042386] DS3000 chip version: 0.192 attached.
[ 17.042758] dw2102: Attached ds3000+ds2020!
[ 17.042761]
[ 17.042767] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 17.043700] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/usb3/3-1/input/input8
[ 17.043785] dvb-usb: schedule remote query interval to 150 msecs.
[ 17.043790] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 17.320077] usb 4-1: new high speed USB device using ehci_hcd and address 3
[ 17.471212] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[ 17.473297] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 17.485486] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 17.485490] dw2102: start downloading DW210X firmware
[ 17.640091] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 17.640170] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 17.640885] DVB: registering new adapter (TeVii S660 USB)
[ 17.871063] dvb-usb: MAC address: 00:18:bd:5a:d9:c9
[ 17.875068] DS3000 chip version: 0.192 attached.
[ 17.875434] dw2102: Attached ds3000+ds2020!
[ 17.875437]
[ 17.875442] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
[ 17.876380] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1c.0/0000:02:00.3/usb4/4-1/input/input9
[ 17.876457] dvb-usb: schedule remote query interval to 150 msecs.
[ 17.876462] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 19.434690] NVRM: Your system is not currently configured to drive a VGA console
[ 19.434695] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 19.434698] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 19.434701] NVRM: drivers including, but not limited to, vesafb, may result in
[ 19.434703] NVRM: corruption and stability problems, and is not supported.
[ 19.699697] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=0
[ 19.736026] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1
[ 21.690061] HDMI: detected monitor SAMSUNG
[ 21.690064] at connection type HDMI
[ 21.690068] HDMI: available speakers: FL/FR
[ 21.690073] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
[ 23.630150] HDMI: detected monitor SAMSUNG
[ 23.630153] at connection type HDMI
[ 23.630156] HDMI: available speakers: FL/FR
[ 23.630161] HDMI: supports coding type LPCM: channels = 2, rates = 44100 48000 88200, bits = 16 20 24
[ 24.276339] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 24.314437] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[ 24.914010] ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
[ 24.918131] ds3000_firmware_ondemand: Waiting for firmware upload(2)...
[ 26.750021] eth0: no IPv6 routers present
[ 30.190691] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
Danke schon mal