Beiträge von Homer72

    Hallo
    Einen festen Sender habe ich eingestellt. Der Sender 25 ist fest eingestellt. Anderen Sender hatte ich auch schon probiert. Es hatte sich nichts geändert. Ja das Problem ist einfach wie du auch sagst das es ab und an passiert.
    Welche Karte benutzt du jetzt? Du hattest ja geschrieben das du bei deiner älteren cine auch das Problem hattest.



    Danke

    Hi
    Ich habe ja den extra Stromanschluss an der Cine S2 angeschlossen. Der soll ja das LMB wie verstanden habe mit Strom versorgen. Ich habe ja ein Multischalter dazwischen der selber ein Netzteil hat.
    Sollte ich dann lieber den Stromanschluss bei der Cine S2 abmachen?


    Danke

    Karte sind beide Kabel dran.


    Frontend :

    Zitat

    vdr-sxfe@vdr-plugin-xineliboutput
    This choice is using the xineliboutput plugin with frontend vdr-sxfe.


    Zitat

    Warum erscheint eine Meldung mit XBMC im syslog?

    weiß ich nicht.

    Hier noch das aktuelle syslog.


    Hallo


    Sorry aber ich bin leider ein totaler Anfänger. Ich will gerne etwas dazu lernen. Wie mein Kumpel sagen würde man muss ihm auch mal in den aller wertesten treten?

    Hallo


    Hier mal ein Auszug

    Zitat


    es sieht so aus, als ob dein at-Dämon ein "paar Leichen im Keller hat".


    Du solltest mal in
    /var/spool/cron/atjobs und /var/spool/cron/atspool
    bzw. mit atq nachsehen, welche jobs da anstehen und was die tun sollen.


    Mit atrm wirst du ungewünschte jobs auch wieder los.



    Kenn mich nicht so aus deshalb:


    Was ist arq?
    Was ist atrm?



    Danke

    Hallo


    Hier noch Aktueller Kernel Log mit der Cine S2.


    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.38-15-generic (buildd@komainu) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #64-Ubuntu SMP Fri Jul 6 18:51:28 UTC 2012 (Ubuntu 2.6.38-15.64-generic 2.6.38.8)
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-15-generic root=/dev/mapper/vdr-root ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
    [ 0.000000] BIOS-e820: 000000003ffa0000 - 000000003ffb0000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffe0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./P5B-DE, BIOS P1.10 11/04/2009
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x3ffa0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-DFFFF write-protect
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] init_memory_mapping: 0000000000000000-000000003ffa0000
    [ 0.000000] 0000000000 - 003fe00000 page 2M
    [ 0.000000] 003fe00000 - 003ffa0000 page 4k
    [ 0.000000] kernel direct mapping tables up to 3ffa0000 @ 1fffd000-20000000
    [ 0.000000] RAMDISK: 36462000 - 37229000
    [ 0.000000] ACPI: RSDP 00000000000fa9d0 00014 (v00 ACPIAM)
    [ 0.000000] ACPI: RSDT 000000003ffa0000 00038 (v01 A M I OEMRSDT 11000904 MSFT 00000097)
    [ 0.000000] ACPI: FACP 000000003ffa0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 000000003ffa0440 05A31 (v01 AS268 AS268101 00000101 INTL 20051117)
    [ 0.000000] ACPI: FACS 000000003ffb0000 00040
    [ 0.000000] ACPI: APIC 000000003ffa0390 0006C (v01 A M I OEMAPIC 11000904 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 000000003ffa0400 0003C (v01 A M I OEMMCFG 11000904 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 000000003ffb0040 00061 (v01 A M I AMI_OEM 11000904 MSFT 00000097)
    [ 0.000000] ACPI: AAFT 000000003ffa5e80 00027 (v01 A M I OEMAAFT 11000904 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000003ffa0000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000003ffa0000
    [ 0.000000] NODE_DATA [000000003ff9b000 - 000000003ff9ffff]
    [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0003ffa0
    [ 0.000000] On node 0 totalpages: 261935
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 3527 pages used for memmap
    [ 0.000000] DMA32 zone: 254425 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bee00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s84416 r8192 d22080 u524288
    [ 0.000000] pcpu-alloc: s84416 r8192 d22080 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258346
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-15-generic root=/dev/mapper/vdr-root ro vmalloc=256m quiet splash vga=792 noresume nohz=off acpi_enforce_resources=lax vt.handoff=7
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 1005404k/1048192k available (5969k kernel code, 452k absent, 42336k reserved, 4989k data, 960k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] NR_IRQS:16640 nr_irqs:712 16
    [ 0.000000] vt handoff: transparent VT on vt#7
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 10485760 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1795.017 MHz processor.
    [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.03 BogoMIPS (lpj=17950170)
    [ 0.010010] pid_max: default: 32768 minimum: 301
    [ 0.010045] Security Framework initialized
    [ 0.010069] AppArmor: AppArmor initialized
    [ 0.010071] Yama: becoming mindful.
    [ 0.010270] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.010909] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.011221] Mount-cache hash table entries: 256
    [ 0.011410] Initializing cgroup subsys ns
    [ 0.011416] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.011419] Initializing cgroup subsys cpuacct
    [ 0.011425] Initializing cgroup subsys memory
    [ 0.011435] Initializing cgroup subsys devices
    [ 0.011438] Initializing cgroup subsys freezer
    [ 0.011441] Initializing cgroup subsys net_cls
    [ 0.011443] Initializing cgroup subsys blkio
    [ 0.011489] mce: CPU supports 6 MCE banks
    [ 0.011499] CPU0: Thermal monitoring enabled (TM2)
    [ 0.011504] using mwait in idle threads.
    [ 0.011538] SMP alternatives: switching to UP code
    [ 0.022498] ACPI: Core revision 20110112
    [ 0.030023] ftrace: allocating 24407 entries in 96 pages
    [ 0.040078] Setting APIC routing to flat
    [ 0.040388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.140788] CPU0: Intel(R) Celeron(R) CPU 430 @ 1.80GHz stepping 01
    [ 0.150000] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
    [ 0.150000] ... version: 2
    [ 0.150000] ... bit width: 40
    [ 0.150000] ... generic registers: 2
    [ 0.150000] ... value mask: 000000ffffffffff
    [ 0.150000] ... max period: 000000007fffffff
    [ 0.150000] ... fixed-purpose events: 3
    [ 0.150000] ... event mask: 0000000700000003
    [ 0.150000] Brought up 1 CPUs
    [ 0.150000] Total of 1 processors activated (3590.03 BogoMIPS).
    [ 0.150000] devtmpfs: initialized
    [ 0.150000] print_constraints: dummy:
    [ 0.150000] Time: 7:55:18 Date: 12/26/12
    [ 0.150000] NET: Registered protocol family 16
    [ 0.150000] ACPI: bus type pci registered
    [ 0.150000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.150000] PCI: not using MMCONFIG
    [ 0.150000] PCI: Using configuration type 1 for base access
    [ 0.150000] bio: create slab <bio-0> at 0
    [ 0.150000] ACPI: EC: Look up EC in DSDT
    [ 0.150000] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.150000] ACPI: Interpreter enabled
    [ 0.150000] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.150000] ACPI: Using IOAPIC for interrupt routing
    [ 0.150000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [ 0.150908] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
    [ 0.167435] ACPI: No dock devices found.
    [ 0.167439] HEST: Table not found.
    [ 0.167443] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.167646] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.167840] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.167844] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.167847] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.167849] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.167852] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xffffffff]
    [ 0.167868] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
    [ 0.167921] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
    [ 0.167957] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.167961] pci 0000:00:01.0: PME# disabled
    [ 0.168000] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.168042] pci 0000:00:1a.0: reg 20: [io 0xc880-0xc89f]
    [ 0.168074] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.168115] pci 0000:00:1a.1: reg 20: [io 0xcc00-0xcc1f]
    [ 0.168156] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.168176] pci 0000:00:1a.7: reg 10: [mem 0xfceffc00-0xfcefffff]
    [ 0.168248] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.168253] pci 0000:00:1a.7: PME# disabled
    [ 0.168275] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.168291] pci 0000:00:1b.0: reg 10: [mem 0xfcef8000-0xfcefbfff 64bit]
    [ 0.168348] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.168352] pci 0000:00:1b.0: PME# disabled
    [ 0.168372] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.168429] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.168433] pci 0000:00:1c.0: PME# disabled
    [ 0.168456] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
    [ 0.168513] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.168517] pci 0000:00:1c.2: PME# disabled
    [ 0.168541] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.168583] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f]
    [ 0.168616] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.168658] pci 0000:00:1d.1: reg 20: [io 0xc480-0xc49f]
    [ 0.168689] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.168731] pci 0000:00:1d.2: reg 20: [io 0xc800-0xc81f]
    [ 0.168772] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.168792] pci 0000:00:1d.7: reg 10: [mem 0xfceff800-0xfceffbff]
    [ 0.168863] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.168868] pci 0000:00:1d.7: PME# disabled
    [ 0.168887] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.168945] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
    [ 0.169029] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
    [ 0.169066] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
    [ 0.169081] pci 0000:00:1f.2: reg 10: [io 0xb080-0xb087]
    [ 0.169090] pci 0000:00:1f.2: reg 14: [io 0xb000-0xb003]
    [ 0.169099] pci 0000:00:1f.2: reg 18: [io 0xac00-0xac07]
    [ 0.169107] pci 0000:00:1f.2: reg 1c: [io 0xa880-0xa883]
    [ 0.169116] pci 0000:00:1f.2: reg 20: [io 0xa800-0xa80f]
    [ 0.169125] pci 0000:00:1f.2: reg 24: [io 0xa480-0xa48f]
    [ 0.169148] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.169152] pci 0000:00:1f.2: PME# disabled
    [ 0.169166] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [ 0.169178] pci 0000:00:1f.3: reg 10: [mem 0xfceff400-0xfceff4ff]
    [ 0.169207] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
    [ 0.169240] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
    [ 0.169255] pci 0000:00:1f.5: reg 10: [io 0xc080-0xc087]
    [ 0.169264] pci 0000:00:1f.5: reg 14: [io 0xc000-0xc003]
    [ 0.169273] pci 0000:00:1f.5: reg 18: [io 0xbc00-0xbc07]
    [ 0.169281] pci 0000:00:1f.5: reg 1c: [io 0xb880-0xb883]
    [ 0.169290] pci 0000:00:1f.5: reg 20: [io 0xb800-0xb80f]
    [ 0.169299] pci 0000:00:1f.5: reg 24: [io 0xb480-0xb48f]
    [ 0.169322] pci 0000:00:1f.5: PME# supported from D3hot
    [ 0.169326] pci 0000:00:1f.5: PME# disabled
    [ 0.169377] pci 0000:04:00.0: [10de:0a65] type 0 class 0x000300
    [ 0.169388] pci 0000:04:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
    [ 0.169400] pci 0000:04:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.169412] pci 0000:04:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
    [ 0.169421] pci 0000:04:00.0: reg 24: [io 0xec00-0xec7f]
    [ 0.169429] pci 0000:04:00.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
    [ 0.169475] pci 0000:04:00.1: [10de:0be3] type 0 class 0x000403
    [ 0.169486] pci 0000:04:00.1: reg 10: [mem 0xfebfc000-0xfebfffff]
    [ 0.169574] pci 0000:00:01.0: PCI bridge to [bus 04-04]
    [ 0.169578] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.169582] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
    [ 0.169587] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
    [ 0.169648] pci 0000:02:00.0: [dd01:0003] type 0 class 0x000480
    [ 0.169675] pci 0000:02:00.0: reg 10: [mem 0xfcff0000-0xfcffffff 64bit]
    [ 0.180019] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.180024] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.180028] pci 0000:00:1c.0: bridge window [mem 0xfcf00000-0xfcffffff]
    [ 0.180035] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.180099] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
    [ 0.180117] pci 0000:01:00.0: reg 10: [io 0xd800-0xd8ff]
    [ 0.180147] pci 0000:01:00.0: reg 18: [mem 0xddfff000-0xddffffff 64bit pref]
    [ 0.180166] pci 0000:01:00.0: reg 20: [mem 0xddff8000-0xddffbfff 64bit pref]
    [ 0.180218] pci 0000:01:00.0: supports D1 D2
    [ 0.180220] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.180226] pci 0000:01:00.0: PME# disabled
    [ 0.200015] pci 0000:00:1c.2: PCI bridge to [bus 01-01]
    [ 0.200020] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.200024] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.200031] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xddffffff 64bit pref]
    [ 0.200095] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.200100] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.200104] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.200111] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.200114] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.200117] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.200120] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.200123] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.200126] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
    [ 0.200149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.200271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.200312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.200435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [ 0.200478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
    [ 0.200629] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.200810] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.209186] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.209248] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.209305] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.209361] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.209417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.209473] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.209528] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.209584] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
    [ 0.209737] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.209742] vgaarb: loaded
    [ 0.209971] SCSI subsystem initialized
    [ 0.210066] libata version 3.00 loaded.
    [ 0.210120] usbcore: registered new interface driver usbfs
    [ 0.210133] usbcore: registered new interface driver hub
    [ 0.210173] usbcore: registered new device driver usb
    [ 0.210316] wmi: Mapper loaded
    [ 0.210318] PCI: Using ACPI for IRQ routing
    [ 0.210322] PCI: pci_cache_line_size set to 64 bytes
    [ 0.210404] reserve RAM buffer: 000000000009f800 - 000000000009ffff
    [ 0.210407] reserve RAM buffer: 000000003ffa0000 - 000000003fffffff
    [ 0.210528] NetLabel: Initializing
    [ 0.210530] NetLabel: domain hash size = 128
    [ 0.210532] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.210545] NetLabel: unlabeled traffic allowed by default
    [ 0.218576] AppArmor: AppArmor Filesystem Enabled
    [ 0.218611] pnp: PnP ACPI init
    [ 0.218631] ACPI: bus type pnp registered
    [ 0.218749] pnp 00:00: [bus 00-ff]
    [ 0.218752] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.218761] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.218764] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.218766] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.218769] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.218772] pnp 00:00: [mem 0x40000000-0xffffffff window]
    [ 0.218837] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.218851] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.218917] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.218922] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.218974] pnp 00:02: [dma 4]
    [ 0.218977] pnp 00:02: [io 0x0000-0x000f]
    [ 0.218979] pnp 00:02: [io 0x0081-0x0083]
    [ 0.218981] pnp 00:02: [io 0x0087]
    [ 0.218983] pnp 00:02: [io 0x0089-0x008b]
    [ 0.218985] pnp 00:02: [io 0x008f]
    [ 0.218987] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.219020] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.219034] pnp 00:03: [io 0x0070-0x0071]
    [ 0.219047] pnp 00:03: [irq 8]
    [ 0.219082] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.219098] pnp 00:04: [io 0x0061]
    [ 0.219130] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.219141] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.219148] pnp 00:05: [irq 13]
    [ 0.219183] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.219857] pnp 00:06: [io 0x0378-0x037f]
    [ 0.219860] pnp 00:06: [io 0x0778-0x077f]
    [ 0.219868] pnp 00:06: [irq 7]
    [ 0.219870] pnp 00:06: [dma 3]
    [ 0.220081] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.220197] pnp 00:07: [io 0x0010-0x001f]
    [ 0.220200] pnp 00:07: [io 0x0022-0x003f]
    [ 0.220202] pnp 00:07: [io 0x0044-0x005f]
    [ 0.220205] pnp 00:07: [io 0x0062-0x0063]
    [ 0.220210] pnp 00:07: [io 0x0065-0x006f]
    [ 0.220212] pnp 00:07: [io 0x0072-0x007f]
    [ 0.220215] pnp 00:07: [io 0x0080]
    [ 0.220217] pnp 00:07: [io 0x0084-0x0086]
    [ 0.220219] pnp 00:07: [io 0x0088]
    [ 0.220221] pnp 00:07: [io 0x008c-0x008e]
    [ 0.220223] pnp 00:07: [io 0x0090-0x009f]
    [ 0.220225] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.220227] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.220229] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.220231] pnp 00:07: [io 0x0800-0x087f]
    [ 0.220233] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.220236] pnp 00:07: [io 0x0480-0x04bf]
    [ 0.220238] pnp 00:07: [io 0x0900-0x090f]
    [ 0.220240] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
    [ 0.220243] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
    [ 0.220331] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.220335] system 00:07: [io 0x0800-0x087f] has been reserved
    [ 0.220338] system 00:07: [io 0x0480-0x04bf] has been reserved
    [ 0.220341] system 00:07: [io 0x0900-0x090f] has been reserved
    [ 0.220345] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.220348] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.220352] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.220459] pnp 00:08: [mem 0xffb80000-0xffbfffff]
    [ 0.220462] pnp 00:08: [mem 0xfff80000-0xffffffff]
    [ 0.220500] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.220556] pnp 00:09: [mem 0xffc00000-0xfff7ffff]
    [ 0.220619] system 00:09: [mem 0xffc00000-0xfff7ffff] has been reserved
    [ 0.220624] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.220691] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
    [ 0.220693] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
    [ 0.220753] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.220757] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.220761] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.220806] pnp 00:0b: [io 0x0060]
    [ 0.220809] pnp 00:0b: [io 0x0064]
    [ 0.220818] pnp 00:0b: [irq 1]
    [ 0.220863] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.221172] pnp 00:0c: [io 0x03f8-0x03ff]
    [ 0.221181] pnp 00:0c: [irq 4]
    [ 0.221183] pnp 00:0c: [dma 0 disabled]
    [ 0.221267] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.221380] pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.221383] pnp 00:0d: [io 0x0280-0x028f]
    [ 0.221386] pnp 00:0d: [io 0x0290-0x029f]
    [ 0.221456] system 00:0d: [io 0x0280-0x028f] has been reserved
    [ 0.221459] system 00:0d: [io 0x0290-0x029f] has been reserved
    [ 0.221463] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.221520] pnp 00:0e: [mem 0xf0000000-0xf3ffffff]
    [ 0.221582] system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.221587] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.221812] pnp 00:0f: [mem 0x00000000-0x0009ffff]
    [ 0.221820] pnp 00:0f: [mem 0x000c0000-0x000cffff]
    [ 0.221823] pnp 00:0f: [mem 0x000e0000-0x000fffff]
    [ 0.221825] pnp 00:0f: [mem 0x00100000-0x3fffffff]
    [ 0.221828] pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.221906] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.221910] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
    [ 0.221913] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.221917] system 00:0f: [mem 0x00100000-0x3fffffff] could not be reserved
    [ 0.221921] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.222091] pnp: PnP ACPI: found 16 devices
    [ 0.222094] ACPI: ACPI bus type pnp unregistered
    [ 0.228771] Switching to clocksource acpi_pm
    [ 0.228842] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
    [ 0.228847] pci 0000:00:1c.2: BAR 14: assigned [mem 0x40200000-0x405fffff]
    [ 0.228851] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.228855] pci 0000:00:01.0: PCI bridge to [bus 04-04]
    [ 0.228858] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.228863] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfebfffff]
    [ 0.228867] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
    [ 0.228872] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 0.228875] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.228881] pci 0000:00:1c.0: bridge window [mem 0xfcf00000-0xfcffffff]
    [ 0.228885] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
    [ 0.228892] pci 0000:00:1c.2: PCI bridge to [bus 01-01]
    [ 0.228895] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.228900] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x405fffff]
    [ 0.228905] pci 0000:00:1c.2: bridge window [mem 0xddf00000-0xddffffff 64bit pref]
    [ 0.228911] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [ 0.228913] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.228918] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.228922] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.228949] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.228954] pci 0000:00:01.0: setting latency timer to 64
    [ 0.228961] pci 0000:00:1c.0: enabling device (0106 -> 0107)
    [ 0.228969] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.228973] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.228983] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.228987] pci 0000:00:1c.2: setting latency timer to 64
    [ 0.228994] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.228998] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.229001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.229004] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.229007] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.229009] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffffffff]
    [ 0.229012] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
    [ 0.229015] pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfebfffff]
    [ 0.229017] pci_bus 0000:04: resource 2 [mem 0xde000000-0xefffffff 64bit pref]
    [ 0.229020] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    [ 0.229023] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
    [ 0.229026] pci_bus 0000:02: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
    [ 0.229029] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.229031] pci_bus 0000:01: resource 1 [mem 0x40200000-0x405fffff]
    [ 0.229034] pci_bus 0000:01: resource 2 [mem 0xddf00000-0xddffffff 64bit pref]
    [ 0.229037] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.229039] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.229042] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.229045] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.229047] pci_bus 0000:03: resource 8 [mem 0x40000000-0xffffffff]
    [ 0.229097] NET: Registered protocol family 2
    [ 0.229194] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.229769] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    [ 0.229769] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.229769] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.229769] TCP reno registered
    [ 0.229769] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.229769] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.229769] NET: Registered protocol family 1
    [ 0.229769] pci 0000:04:00.0: Boot video device
    [ 0.229769] PCI: CLS 32 bytes, default 64
    [ 0.229769] audit: initializing netlink socket (disabled)
    [ 0.229769] type=2000 audit(1356508518.220:1): initialized
    [ 0.239982] Trying to unpack rootfs image as initramfs...
    [ 0.260396] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.262428] VFS: Disk quotas dquot_6.5.2
    [ 0.262501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.263283] fuse init (API version 7.16)
    [ 0.263415] msgmni has been set to 1963
    [ 0.270408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.270454] io scheduler noop registered
    [ 0.270456] io scheduler deadline registered
    [ 0.270513] io scheduler cfq registered (default)
    [ 0.270640] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.270678] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.270761] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.270800] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.270902] pcieport 0000:00:1c.2: setting latency timer to 64
    [ 0.270942] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.271072] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
    [ 0.271076] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
    [ 0.271079] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
    [ 0.271083] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
    [ 0.271101] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.271104] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.271108] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.271130] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
    [ 0.271132] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
    [ 0.271137] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
    [ 0.271157] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.271208] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 1849 ss_did 283f
    [ 0.271230] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
    [ 0.271246] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 1849 ss_did 2843
    [ 0.271266] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
    [ 0.271274] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.271324] intel_idle: MWAIT substates: 0x220
    [ 0.271327] intel_idle: does not run on family 6 model 22
    [ 0.271434] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [ 0.271440] ACPI: Power Button [PWRB]
    [ 0.271500] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 0.271504] ACPI: Power Button [PWRF]
    [ 0.271688] ACPI: acpi_idle registered with cpuidle
    [ 0.273858] ERST: Table is not found!
    [ 0.273957] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [ 0.294504] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.342021] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.360613] Linux agpgart interface v0.103
    [ 0.362098] brd: module loaded
    [ 0.362769] loop: module loaded
    [ 0.362908] i2c-core: driver [adp5520] using legacy suspend method
    [ 0.362910] i2c-core: driver [adp5520] using legacy resume method
    [ 0.363046] ata_piix 0000:00:1f.2: version 2.13
    [ 0.363074] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.363080] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [ 0.520148] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 0.530174] scsi0 : ata_piix
    [ 0.530348] scsi1 : ata_piix
    [ 0.531769] ata1: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 19
    [ 0.531775] ata2: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 19
    [ 0.531852] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.531858] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    [ 0.531903] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 0.532194] scsi2 : ata_piix
    [ 0.532315] scsi3 : ata_piix
    [ 0.533573] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19
    [ 0.533578] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19
    [ 0.533972] Fixed MDIO Bus: probed
    [ 0.534015] PPP generic driver version 2.4.2
    [ 0.534088] tun: Universal TUN/TAP device driver, 1.6
    [ 0.534090] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 0.534222] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.534248] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.534268] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 0.534272] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 0.534328] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 0.534367] ehci_hcd 0000:00:1a.7: debug port 1
    [ 0.538236] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
    [ 0.538259] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfceffc00
    [ 0.570108] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 0.570295] hub 1-0:1.0: USB hub found
    [ 0.570302] hub 1-0:1.0: 4 ports detected
    [ 0.570401] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.570423] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 0.570427] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 0.570500] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 0.570539] ehci_hcd 0000:00:1d.7: debug port 1
    [ 0.574431] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
    [ 0.574453] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfceff800
    [ 0.590280] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 0.590487] hub 2-0:1.0: USB hub found
    [ 0.590493] hub 2-0:1.0: 6 ports detected
    [ 0.590584] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.590600] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.590692] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.590702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 0.590706] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 0.590782] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 0.590828] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
    [ 0.590994] hub 3-0:1.0: USB hub found
    [ 0.591000] hub 3-0:1.0: 2 ports detected
    [ 0.591084] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 0.591093] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 0.591097] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 0.591158] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 0.591199] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000cc00
    [ 0.591353] hub 4-0:1.0: USB hub found
    [ 0.591358] hub 4-0:1.0: 2 ports detected
    [ 0.591433] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 0.591441] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 0.591445] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 0.591500] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 0.591528] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
    [ 0.591680] hub 5-0:1.0: USB hub found
    [ 0.591686] hub 5-0:1.0: 2 ports detected
    [ 0.591764] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 0.591772] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 0.591776] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 0.591840] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 0.591869] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
    [ 0.592022] hub 6-0:1.0: USB hub found
    [ 0.592027] hub 6-0:1.0: 2 ports detected
    [ 0.592101] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.592110] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 0.592113] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 0.592168] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 0.592199] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
    [ 0.592358] hub 7-0:1.0: USB hub found
    [ 0.592364] hub 7-0:1.0: 2 ports detected
    [ 0.592503] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.592506] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.593009] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.593164] mousedev: PS/2 mouse device common for all mice
    [ 0.600367] rtc_cmos 00:03: RTC can wake from S4
    [ 0.600440] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.600469] rtc0: alarms up to one month, y3k, 114 bytes nvram
    [ 0.600615] device-mapper: uevent: version 1.0.3
    [ 0.600722] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
    [ 0.600811] device-mapper: multipath: version 1.2.0 loaded
    [ 0.600814] device-mapper: multipath round-robin: version 1.0.0 loaded
    [ 0.600965] cpuidle: using governor ladder
    [ 0.600968] cpuidle: using governor menu
    [ 0.601222] TCP cubic registered
    [ 0.601378] NET: Registered protocol family 10
    [ 0.601929] NET: Registered protocol family 17
    [ 0.601957] Registering the dns_resolver key type
    [ 0.602165] registered taskstats version 1
    [ 0.602455] Magic number: 8:622:926
    [ 0.602568] rtc_cmos 00:03: setting system clock to 2012-12-26 07:55:19 UTC (1356508519)
    [ 0.602572] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 0.602574] EDD information not available.
    [ 0.658685] Freeing initrd memory: 14108k freed
    [ 0.900830] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.050048] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.070974] ata3.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
    [ 1.070977] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.090988] ata3.00: configured for UDMA/133
    [ 1.140018] usb 6-1: new low speed USB device using uhci_hcd and address 2
    [ 1.230149] Refined TSC clocksource calibration: 1795.030 MHz.
    [ 1.230155] Switching to clocksource tsc
    [ 1.390057] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.390068] ata1.01: SATA link down (SStatus 4 SControl 300)
    [ 1.390183] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.390196] ata2.01: SATA link down (SStatus 4 SControl 300)
    [ 1.390207] ata2.01: link offline, clearing class 3 to NONE
    [ 1.410278] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX01, max UDMA/100
    [ 1.410983] ata1.00: ATA-8: WDC WD10EARS-00MVWB0, 51.0AB51, max UDMA/133
    [ 1.410986] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 1.430996] ata1.00: configured for UDMA/133
    [ 1.431128] scsi 0:0:0:0: Direct-Access ATA WDC WD10EARS-00M 51.0 PQ: 0 ANSI: 5
    [ 1.431321] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 1.431450] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.431453] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.431525] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.431529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.431560] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.450133] ata2.00: configured for UDMA/100
    [ 1.457661] sda: sda1 sda2 < sda5 >
    [ 1.458026] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.458556] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS70 EX01 PQ: 0 ANSI: 5
    [ 1.467086] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.467090] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.467222] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.467312] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 1.467466] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
    [ 1.467638] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [ 1.467740] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 1.467744] sd 2:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.467813] sd 2:0:0:0: [sdb] Write Protect is off
    [ 1.467817] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.467846] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.485543] sdb: sdb1
    [ 1.485843] sd 2:0:0:0: [sdb] Attached SCSI disk
    [ 1.487992] Freeing unused kernel memory: 960k freed
    [ 1.488453] Write protecting the kernel read-only data: 10240k
    [ 1.489276] Freeing unused kernel memory: 156k freed
    [ 1.495569] Freeing unused kernel memory: 1432k freed
    [ 1.524005] <30>udev[67]: starting version 167
    [ 1.568372] vesafb: framebuffer at 0xdf000000, mapped to 0xffffc90004580000, using 3072k, total 3072k
    [ 1.568377] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 1.568379] vesafb: scrolling: redraw
    [ 1.568382] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 1.568521] Console: switching to colour frame buffer device 128x48
    [ 1.568545] fb0: VESA VGA frame buffer device
    [ 1.773371] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.773398] r8169 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 1.773437] r8169 0000:01:00.0: setting latency timer to 64
    [ 1.773496] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
    [ 1.773990] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc90000190000, bc:5f:f4:0c:76:ed, XID 081000c0 IRQ 43
    [ 1.960475] input: 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input2
    [ 1.960746] generic-usb 0003:04D9:2519.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Wireless Touchpad Keyboard] on usb-0000:00:1d.1-1/input0
    [ 2.030668] input: 2.4G Wireless Touchpad Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input3
    [ 2.031049] generic-usb 0003:04D9:2519.0002: input,hidraw1: USB HID v1.10 Mouse [2.4G Wireless Touchpad Keyboard] on usb-0000:00:1d.1-1/input1
    [ 2.031344] usbcore: registered new interface driver usbhid
    [ 2.031348] usbhid: USB HID core driver
    [ 2.246641] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
    [ 12.650201] <30>udev[297]: starting version 167
    [ 12.722839] lp: driver loaded but no devices found
    [ 12.811103] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
    [ 13.258780] EXT3-fs: barriers not enabled
    [ 13.550799] parport_pc 00:06: reported by Plug and Play ACPI
    [ 13.550853] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [ 13.680139] kjournald starting. Commit interval 5 seconds
    [ 13.680648] EXT3-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
    [ 13.681634] EXT3-fs (sdb1): using internal journal
    [ 13.681641] EXT3-fs (sdb1): mounted filesystem with ordered data mode
    [ 13.785503] nvidia: module license 'NVIDIA' taints kernel.
    [ 13.785509] Disabling lock debugging due to kernel taint
    [ 13.917795] lp0: using parport0 (interrupt-driven).
    [ 13.982561] lirc_dev: IR Remote Control driver registered, major 250
    [ 13.995458] RPC: Registered udp transport module.
    [ 13.995462] RPC: Registered tcp transport module.
    [ 13.995464] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 14.288917] lirc_serial: module is from the staging directory, the quality is unknown, you have been warned.
    [ 14.340541] FS-Cache: Loaded
    [ 14.401183] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 14.401196] nvidia 0000:04:00.0: setting latency timer to 64
    [ 14.401202] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 14.403396] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012
    [ 14.423183] FS-Cache: Netfs 'nfs' registered for caching
    [ 14.467619] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [ 14.471978] WARNING: You are using an experimental version of the media stack.
    [ 14.471980] As the driver is backported to an older kernel, it doesn't offer
    [ 14.471981] enough quality for its usage in production.
    [ 14.471983] Use it with care.
    [ 14.471983] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org:(
    [ 14.471985] 875e2e3edf48a206c64195666cf408dd3d119137 [media] omap3isp: Mark next captured frame as faulty when an SBL overflow occurs
    [ 14.471986] c3cd257402fdcd650816ec25b83480a24912430a [media] omap3isp: video: Don't WARN() on unknown pixel formats
    [ 14.471988] 22db44cb9cd67d56b02b2b5dceb10d3d1361b28b [media] as3645a: Add driver for LED flash controller
    [ 14.699489] Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH
    [ 14.701527] DDBridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 14.701547] DDBridge driver detected: Digital Devices Cine S2 V6 DVB adapter
    [ 14.701576] HW 0001000b REG 00010004
    [ 14.701635] DDBridge 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 14.737827] Port 0 (TAB 1): DUAL DVB-S2
    [ 14.743778] Port 1 (TAB 2): NO MODULE
    [ 14.764171] Port 2 (TAB 3): NO MODULE
    [ 14.765295] DVB: registering new adapter (DDBridge)
    [ 14.765298] DVB: registering new adapter (DDBridge)
    [ 15.089293] r8169 0000:01:00.0: eth0: link down
    [ 15.089301] r8169 0000:01:00.0: eth0: link down
    [ 15.099708] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 15.184270] ppdev: user-space parallel port driver
    [ 15.306681] Adding 1044476k swap on /dev/mapper/vdr-swap_1. Priority:-1 extents:1 across:1044476k
    [ 15.330088] lirc_serial: auto-detected active low receiver
    [ 15.330196] lirc_serial lirc_serial.0: lirc_dev: driver lirc_serial registered at minor = 0
    [ 15.336388] input: lircd as /devices/virtual/input/input4
    [ 15.373200] input: eventlircd as /devices/virtual/input/input5
    [ 15.522274] LNBx2x attached on addr=a
    [ 15.569404] stv6110x_attach: Attaching STV6110x
    [ 15.569410] attach tuner input 0 adr 60
    [ 15.569414] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
    [ 15.904352] LNBx2x attached on addr=8
    [ 15.904458] stv6110x_attach: Attaching STV6110x
    [ 15.904461] attach tuner input 1 adr 63
    [ 15.904465] DVB: registering adapter 1 frontend 0 (STV090x Multistandard)...
    [ 16.302238] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 16.302295] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 16.302323] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 16.471663] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 16.471668] hda_intel: Disable MSI for Nvidia chipset
    [ 16.471717] HDA Intel 0000:04:00.1: setting latency timer to 64
    [ 17.021411] svc: failed to register lockdv1 RPC service (errno 97).
    [ 17.030415] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
    [ 17.030688] NFSD: starting 90-second grace period
    [ 17.153942] r8169 0000:01:00.0: eth0: link up
    [ 17.154084] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 18.664085] NVRM: Your system is not currently configured to drive a VGA console
    [ 18.664090] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    [ 18.664093] NVRM: requires the use of a text-mode VGA console. Use of other console
    [ 18.664096] NVRM: drivers including, but not limited to, vesafb, may result in
    [ 18.664098] NVRM: corruption and stability problems, and is not supported.
    [ 26.740457] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
    [ 28.040020] eth0: no IPv6 routers present


    Danke

    Hallo
    Mhh mit dem syslog weiss ich nicht genau bescheid.
    Habe das gefunden es ist aus yaVDR . Es sieht aus als ob er mich damit zumüllt.


    Dec 26 11:00:39 vdr atd[20681]: File a00b1101555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20685]: File a00b1001555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20686]: File a00b0b01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20687]: File a00b1201555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20680]: File a00b0601555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20690]: File a00b0c01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20691]: File a00b030155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20692]: File a00b0501555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20689]: File a00b0d01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20688]: File a00b0801555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20693]: File a00b1301555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20694]: File a00b040155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20695]: File a00b0a01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20697]: File a00b0601555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20696]: File a00b0e01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20698]: File a00b1101555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20700]: File a00b0701555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20699]: File a00b0f01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20704]: File a00b1201555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20705]: File a00b0801555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20703]: File a00b0b01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20706]: File a00b0d01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20702]: File a00b1001555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20707]: File a00b0c01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20708]: File a00b030155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20701]: File a00b0901555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20709]: File a00b0501555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20710]: File a00b1301555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20715]: File a00b1101555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20714]: File a00b0601555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20713]: File a00b0e01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20716]: File a00b0f01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20712]: File a00b0a01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20717]: File a00b0701555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20718]: File a00b0901555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20711]: File a00b040155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20719]: File a00b1001555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20720]: File a00b0b01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20721]: File a00b1201555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20722]: File a00b0801555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20724]: File a00b0c01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20723]: File a00b0d01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20725]: File a00b030155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20726]: File a00b0501555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20727]: File a00b1301555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20728]: File a00b040155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20729]: File a00b0a01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20733]: File a00b0f01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20732]: File a00b1101555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20731]: File a00b0601555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20730]: File a00b0e01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20737]: File a00b1001555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20738]: File a00b0b01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20735]: File a00b0701555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20736]: File a00b0901555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20742]: File a00b0c01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20741]: File a00b0d01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20740]: File a00b0801555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20743]: File a00b030155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20739]: File a00b1201555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20744]: File a00b0501555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20745]: File a00b1301555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20747]: File a00b0a01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20746]: File a00b040155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20748]: File a00b0e01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20749]: File a00b0601555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20750]: File a00b1101555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20751]: File a00b0f01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20757]: File a00b1201555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20756]: File a00b0b01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20758]: File a00b0801555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20755]: File a00b1001555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20759]: File a00b0d01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20754]: File a00b0901555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20760]: File a00b0c01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20761]: File a00b030155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20762]: File a00b0501555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20753]: File a00b0701555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20763]: File a00b1301555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20764]: File a00b040155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20765]: File a00b0a01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20766]: File a00b0e01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20768]: File a00b1101555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20769]: File a00b0f01555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20767]: File a00b0601555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20770]: File a00b0701555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20771]: File a00b0901555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20772]: File a00b1001555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20773]: File a00b0b01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20774]: File a00b1201555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20775]: File a00b0801555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20777]: File a00b0c01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20776]: File a00b0d01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20778]: File a00b030155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20779]: File a00b0501555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20782]: File a00b0a01555c29 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20781]: File a00b040155588e is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20780]: File a00b1301555c71 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20784]: File a00b0601555c28 is in wrong format - aborting
    Dec 26 11:00:39 vdr atd[20783]: File a00b0e01555c71 is in wrong format - aborting


    Aus dem WinSCP bekomme ich kein Log raus die sind alle zu groß. Editor kann die grösse nicht öffnen und mit Proton bekomme ich es auch nicht auf.
    Wenn wer eine Idee hat bin gern bereit es zu versuchen.


    Danke

    Hallo
    So die Signatur mal erledigt. Wenn noch was fehlen sollte suche ich gerne raus.
    RAM sollte nicht das Problem sein. Grafikkarte wollte erst die 560 nehmen aber waren mir zuviele Probleme im Forum beschrieben.

    Wenn ich das mit den Hd Karten nicht hinbekomme welche Sd Karten würdet ihr empfehlen. Es sollen auf jeden fall Karten verbaut werden die sich nicht behindern. Das problem hatte ich vorher wa immer wieder zu start Problemen geführt hat.


    Danke

    Hallo
    Muss ich bei der Cine S2 DiSqc anschalten?
    Noch eine Frage muss ich den Stromstecker anschließen? Habe zwischen LMB und VDR einen multiswitch mit internem Netzteil?
    Dann war bis jetzt einmal Nosignal und der VDR hat dann nicht richtig funktioniert. Es war so als ob er es versucht und dann erst auf meine Eingaben reagiert.
    Werde jetzt aber erst paar Tage mal schauen wie er weiter läuft.