ZitatAlles anzeigenSep 20 22:01:02 localhost /USR/SBIN/CROND[1373]: (root) CMD (run-parts /etc/cron.hourly)
Sep 20 22:02:46 localhost shutdown[1589]: shutting down for system reboot
Sep 20 22:02:46 localhost init: Switching to runlevel: 6
Sep 20 22:02:47 localhost syslog-ng[861]: Termination requested via signal, terminating;
Sep 20 22:02:47 localhost syslog-ng[861]: syslog-ng shutting down; version='3.2.4'
Sep 20 22:03:23 localhost syslog-ng[809]: syslog-ng starting up; version='3.2.4'
Sep 20 22:03:23 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset
Sep 20 22:03:23 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu
Sep 20 22:03:23 localhost kernel: [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011
Sep 20 22:03:23 localhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/f9c8c728-1b8d-4837-8d22-41844fb8d1fa ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-provided physical RAM map:
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cefc0000 (usable)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 00000000cefc0000 - 00000000cefc3000 (ACPI NVS)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 00000000cefc3000 - 00000000cefe0000 (ACPI data)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 00000000cefe0000 - 00000000cf000000 (reserved)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Sep 20 22:03:23 localhost kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 000000011fe00000 (usable)
Sep 20 22:03:23 localhost kernel: [ 0.000000] NX (Execute Disable) protection: active
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMI 2.4 present.
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. H67N-USB3-B3/H67N-USB3-B3, BIOS F5 03/31/2011
Sep 20 22:03:23 localhost kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Sep 20 22:03:23 localhost kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
Sep 20 22:03:23 localhost kernel: [ 0.000000] No AGP bridge found
Sep 20 22:03:23 localhost kernel: [ 0.000000] last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
Sep 20 22:03:23 localhost kernel: [ 0.000000] MTRR default type: uncachable
Sep 20 22:03:23 localhost kernel: [ 0.000000] MTRR fixed ranges enabled:
Sep 20 22:03:23 localhost kernel: [ 0.000000] 00000-9FFFF write-back
Sep 20 22:03:23 localhost kernel: [ 0.000000] A0000-BFFFF uncachable
Sep 20 22:03:23 localhost kernel: [ 0.000000] C0000-CCFFF write-protect
Sep 20 22:03:23 localhost kernel: [ 0.000000] CD000-EFFFF uncachable
Sep 20 22:03:23 localhost kernel: [ 0.000000] F0000-FFFFF write-through
Sep 20 22:03:23 localhost kernel: [ 0.000000] MTRR variable ranges enabled:
Sep 20 22:03:23 localhost kernel: [ 0.000000] 0 base 000000000 mask F00000000 write-back
Sep 20 22:03:23 localhost kernel: [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
Sep 20 22:03:23 localhost kernel: [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
Sep 20 22:03:23 localhost kernel: [ 0.000000] 3 base 0CF800000 mask FFF800000 uncachable
Sep 20 22:03:23 localhost kernel: [ 0.000000] 4 base 100000000 mask FE0000000 write-back
Sep 20 22:03:23 localhost kernel: [ 0.000000] 5 disabled
Sep 20 22:03:23 localhost kernel: [ 0.000000] 6 disabled
Sep 20 22:03:23 localhost kernel: [ 0.000000] 7 disabled
Sep 20 22:03:23 localhost kernel: [ 0.000000] 8 disabled
Sep 20 22:03:23 localhost kernel: [ 0.000000] 9 disabled
Sep 20 22:03:23 localhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Sep 20 22:03:23 localhost kernel: [ 0.000000] e820 update range: 00000000cf800000 - 0000000100000000 (usable) ==> (reserved)
Sep 20 22:03:23 localhost kernel: [ 0.000000] last_pfn = 0xcefc0 max_arch_pfn = 0x400000000
Sep 20 22:03:23 localhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000f5730] f5730
Sep 20 22:03:23 localhost kernel: [ 0.000000] initial memory mapped : 0 - 20000000
Sep 20 22:03:23 localhost kernel: [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
Sep 20 22:03:23 localhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000cefc0000
Sep 20 22:03:23 localhost kernel: [ 0.000000] 0000000000 - 00cee00000 page 2M
Sep 20 22:03:23 localhost kernel: [ 0.000000] 00cee00000 - 00cefc0000 page 4k
Sep 20 22:03:23 localhost kernel: [ 0.000000] kernel direct mapping tables up to cefc0000 @ cefba000-cefc0000
Sep 20 22:03:23 localhost kernel: [ 0.000000] init_memory_mapping: 0000000100000000-000000011fe00000
Sep 20 22:03:23 localhost kernel: [ 0.000000] 0100000000 - 011fe00000 page 2M
Sep 20 22:03:23 localhost kernel: [ 0.000000] kernel direct mapping tables up to 11fe00000 @ 11fdfa000-11fe00000
Sep 20 22:03:23 localhost kernel: [ 0.000000] RAMDISK: 7fde1000 - 7ffff000
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: RSDP 00000000000f6ea0 00014 (v00 GBT )
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: RSDT 00000000cefc3040 0004C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: FACP 00000000cefc3100 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: DSDT 00000000cefc31c0 0429B (v01 GBT GBTUACPI 00001000 MSFT 04000000)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: FACS 00000000cefc0000 00040
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: HPET 00000000cefc75c0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: MCFG 00000000cefc7640 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: ASPT 00000000cefc7700 00034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: SSPT 00000000cefc7740 02348 (v01 GBT SsptHead 312E3042 UTBG 01010101)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: EUDS 00000000cefc9a90 000C0 (v01 GBT 00000000 00000000)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: MATS 00000000cefc9b50 00034 (v01 GBT 00000000 00000000)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: TAMG 00000000cefc9bb0 005B2 (v01 GBT GBT B0 5455312E BG?? 53450101)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: APIC 00000000cefc74c0 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: SSDT 00000000cefca180 00CA0 (v01 INTEL PPM RCM 80000001 INTL 20061109)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Sep 20 22:03:23 localhost kernel: [ 0.000000] No NUMA configuration found
Sep 20 22:03:23 localhost kernel: [ 0.000000] Faking a node at 0000000000000000-000000011fe00000
Sep 20 22:03:23 localhost kernel: [ 0.000000] Initmem setup node 0 0000000000000000-000000011fe00000
Sep 20 22:03:23 localhost kernel: [ 0.000000] NODE_DATA [000000011fdfb000 - 000000011fdfffff]
Sep 20 22:03:23 localhost kernel: [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b800000-ffff88011edfffff] on node 0
Sep 20 22:03:23 localhost kernel: [ 0.000000] Zone PFN ranges:
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000
Sep 20 22:03:23 localhost kernel: [ 0.000000] Normal 0x00100000 -> 0x0011fe00
Sep 20 22:03:23 localhost kernel: [ 0.000000] Movable zone start PFN for each node
Sep 20 22:03:23 localhost kernel: [ 0.000000] early_node_map[3] active PFN ranges
Sep 20 22:03:23 localhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f
Sep 20 22:03:23 localhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000cefc0
Sep 20 22:03:23 localhost kernel: [ 0.000000] 0: 0x00100000 -> 0x0011fe00
Sep 20 22:03:23 localhost kernel: [ 0.000000] On node 0 totalpages: 978255
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMA zone: 56 pages used for memmap
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMA zone: 5 pages reserved
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMA zone: 3922 pages, LIFO batch:0
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMA32 zone: 14280 pages used for memmap
Sep 20 22:03:23 localhost kernel: [ 0.000000] DMA32 zone: 829432 pages, LIFO batch:31
Sep 20 22:03:23 localhost kernel: [ 0.000000] Normal zone: 1785 pages used for memmap
Sep 20 22:03:23 localhost kernel: [ 0.000000] Normal zone: 128775 pages, LIFO batch:31
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Sep 20 22:03:23 localhost kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: IRQ0 used by override.
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: IRQ2 used by override.
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: IRQ9 used by override.
Sep 20 22:03:23 localhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Sep 20 22:03:23 localhost kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Sep 20 22:03:23 localhost kernel: [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
Sep 20 22:03:23 localhost kernel: [ 0.000000] nr_irqs_gsi: 40
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000cefc0000 - 00000000cefc3000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000cefc3000 - 00000000cefe0000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000cefe0000 - 00000000cf000000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000cf000000 - 00000000f4000000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
Sep 20 22:03:23 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Sep 20 22:03:23 localhost kernel: [ 0.000000] Allocating PCI resources starting at cf000000 (gap: cf000000:25000000)
Sep 20 22:03:23 localhost kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware
Sep 20 22:03:23 localhost kernel: [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
Sep 20 22:03:23 localhost kernel: [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fa00000 s78464 r8192 d23936 u262144
Sep 20 22:03:23 localhost kernel: [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
Sep 20 22:03:23 localhost kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Sep 20 22:03:23 localhost kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 962129
Sep 20 22:03:23 localhost kernel: [ 0.000000] Policy zone: Normal
Sep 20 22:03:23 localhost kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/f9c8c728-1b8d-4837-8d22-41844fb8d1fa ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Sep 20 22:03:23 localhost kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Sep 20 22:03:23 localhost kernel: [ 0.000000] Checking aperture...
Sep 20 22:03:23 localhost kernel: [ 0.000000] No AGP bridge found
Sep 20 22:03:23 localhost kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
Sep 20 22:03:23 localhost kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Sep 20 22:03:23 localhost kernel: [ 0.000000] Memory: 3778928k/4716544k available (4065k kernel code, 803524k absent, 134092k reserved, 3303k data, 712k init)
Sep 20 22:03:23 localhost kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Sep 20 22:03:23 localhost kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
Sep 20 22:03:23 localhost kernel: [ 0.000000] Verbose stalled-CPUs detection is disabled.
Sep 20 22:03:23 localhost kernel: [ 0.000000] NR_IRQS:2304
Sep 20 22:03:23 localhost kernel: [ 0.000000] Console: colour VGA+ 80x25
Sep 20 22:03:23 localhost kernel: [ 0.000000] console [tty0] enabled
Sep 20 22:03:23 localhost kernel: [ 0.000000] allocated 31457280 bytes of page_cgroup
Sep 20 22:03:23 localhost kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Sep 20 22:03:23 localhost kernel: [ 0.000000] hpet clockevent registered
Sep 20 22:03:23 localhost kernel: [ 0.000000] Fast TSC calibration using PIT
Sep 20 22:03:23 localhost kernel: [ 0.003333] Detected 2195.039 MHz processor.
Sep 20 22:03:23 localhost kernel: [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.99 BogoMIPS (lpj=7316796)
Sep 20 22:03:23 localhost kernel: [ 0.000006] pid_max: default: 32768 minimum: 301
Sep 20 22:03:23 localhost kernel: [ 0.000120] Security Framework initialized
Sep 20 22:03:23 localhost kernel: [ 0.000125] AppArmor: AppArmor disabled by boot time parameter
Sep 20 22:03:23 localhost kernel: [ 0.000516] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.001808] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.002360] Mount-cache hash table entries: 256
Sep 20 22:03:23 localhost kernel: [ 0.002694] Initializing cgroup subsys cpuacct
Sep 20 22:03:23 localhost kernel: [ 0.002722] Initializing cgroup subsys memory
Sep 20 22:03:23 localhost kernel: [ 0.002737] Initializing cgroup subsys devices
Sep 20 22:03:23 localhost kernel: [ 0.002739] Initializing cgroup subsys freezer
Sep 20 22:03:23 localhost kernel: [ 0.002741] Initializing cgroup subsys net_cls
Sep 20 22:03:23 localhost kernel: [ 0.002742] Initializing cgroup subsys blkio
Sep 20 22:03:23 localhost kernel: [ 0.002790] CPU: Physical Processor ID: 0
Sep 20 22:03:23 localhost kernel: [ 0.002791] CPU: Processor Core ID: 0
Sep 20 22:03:23 localhost kernel: [ 0.002796] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Sep 20 22:03:23 localhost kernel: [ 0.002797] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
Sep 20 22:03:23 localhost kernel: [ 0.002800] mce: CPU supports 7 MCE banks
Sep 20 22:03:23 localhost kernel: [ 0.002812] CPU0: Thermal monitoring enabled (TM1)
Sep 20 22:03:23 localhost kernel: [ 0.002819] using mwait in idle threads.
Sep 20 22:03:23 localhost kernel: [ 0.003998] ACPI: Core revision 20110413
Sep 20 22:03:23 localhost kernel: [ 0.009175] ftrace: allocating 16145 entries in 64 pages
Sep 20 22:03:23 localhost kernel: [ 0.016121] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 20 22:03:23 localhost kernel: [ 0.049091] CPU0: Intel(R) Pentium(R) CPU G620T @ 2.20GHz stepping 07
Sep 20 22:03:23 localhost kernel: [ 0.154230] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
Sep 20 22:03:23 localhost kernel: [ 0.154236] ... version: 3
Sep 20 22:03:23 localhost kernel: [ 0.154238] ... bit width: 48
Sep 20 22:03:23 localhost kernel: [ 0.154239] ... generic registers: 8
Sep 20 22:03:23 localhost kernel: [ 0.154240] ... value mask: 0000ffffffffffff
Sep 20 22:03:23 localhost kernel: [ 0.154242] ... max period: 000000007fffffff
Sep 20 22:03:23 localhost kernel: [ 0.154243] ... fixed-purpose events: 3
Sep 20 22:03:23 localhost kernel: [ 0.154245] ... event mask: 00000007000000ff
Sep 20 22:03:23 localhost kernel: [ 0.174314] NMI watchdog enabled, takes one hw-pmu counter.
Sep 20 22:03:23 localhost kernel: [ 0.200857] Booting Node 0, Processors #1
Sep 20 22:03:23 localhost kernel: [ 0.200861] smpboot cpu 1: start_ip = 9a000
Sep 20 22:03:23 localhost kernel: [ 0.314170] NMI watchdog enabled, takes one hw-pmu counter.
Sep 20 22:03:23 localhost kernel: [ 0.320718] Brought up 2 CPUs
Sep 20 22:03:23 localhost kernel: [ 0.320721] Total of 2 processors activated (8783.95 BogoMIPS).
Sep 20 22:03:23 localhost kernel: [ 0.322168] devtmpfs: initialized
Sep 20 22:03:23 localhost kernel: [ 0.322961] PM: Registering ACPI NVS region at cefc0000 (12288 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.323720] print_constraints: dummy:
Sep 20 22:03:23 localhost kernel: [ 0.323788] NET: Registered protocol family 16
Sep 20 22:03:23 localhost kernel: [ 0.323880] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Sep 20 22:03:23 localhost kernel: [ 0.323882] ACPI: bus type pci registered
Sep 20 22:03:23 localhost kernel: [ 0.324010] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
Sep 20 22:03:23 localhost kernel: [ 0.324013] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
Sep 20 22:03:23 localhost kernel: [ 0.333509] PCI: Using configuration type 1 for base access
Sep 20 22:03:23 localhost kernel: [ 0.333922] bio: create slab <bio-0> at 0
Sep 20 22:03:23 localhost kernel: [ 0.334682] ACPI: EC: Look up EC in DSDT
Sep 20 22:03:23 localhost kernel: [ 0.343936] ACPI Warning: Incorrect checksum in table [TAMG] - 0x95, should be 0x94 (20110413/tbutils-314)
Sep 20 22:03:23 localhost kernel: [ 0.344247] ACPI: Interpreter enabled
Sep 20 22:03:23 localhost kernel: [ 0.344250] ACPI: (supports S0 S3 S4 S5)
Sep 20 22:03:23 localhost kernel: [ 0.344265] ACPI: Using IOAPIC for interrupt routing
Sep 20 22:03:23 localhost kernel: [ 0.346968] ACPI: No dock devices found.
Sep 20 22:03:23 localhost kernel: [ 0.346970] HEST: Table not found.
Sep 20 22:03:23 localhost kernel: [ 0.346972] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Sep 20 22:03:23 localhost kernel: [ 0.347014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
Sep 20 22:03:23 localhost kernel: [ 0.347098] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
Sep 20 22:03:23 localhost kernel: [ 0.347100] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
Sep 20 22:03:23 localhost kernel: [ 0.347103] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
Sep 20 22:03:23 localhost kernel: [ 0.347105] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
Sep 20 22:03:23 localhost kernel: [ 0.347107] pci_root PNP0A03:00: host bridge window [mem 0xdfa00000-0xfebfffff]
Sep 20 22:03:23 localhost kernel: [ 0.347118] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
Sep 20 22:03:23 localhost kernel: [ 0.347152] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
Sep 20 22:03:23 localhost kernel: [ 0.347163] pci 0000:00:02.0: reg 10: [mem 0xfb800000-0xfbbfffff 64bit]
Sep 20 22:03:23 localhost kernel: [ 0.347170] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
Sep 20 22:03:23 localhost kernel: [ 0.347175] pci 0000:00:02.0: reg 20: [io 0xff00-0xff3f]
Sep 20 22:03:23 localhost kernel: [ 0.347226] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
Sep 20 22:03:23 localhost kernel: [ 0.347250] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
Sep 20 22:03:23 localhost kernel: [ 0.347313] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Sep 20 22:03:23 localhost kernel: [ 0.347317] pci 0000:00:16.0: PME# disabled
Sep 20 22:03:23 localhost kernel: [ 0.347349] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
Sep 20 22:03:23 localhost kernel: [ 0.347370] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
Sep 20 22:03:23 localhost kernel: [ 0.347446] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Sep 20 22:03:23 localhost kernel: [ 0.347450] pci 0000:00:1a.0: PME# disabled
Sep 20 22:03:23 localhost kernel: [ 0.347477] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
Sep 20 22:03:23 localhost kernel: [ 0.347493] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit]
Sep 20 22:03:23 localhost kernel: [ 0.347549] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Sep 20 22:03:23 localhost kernel: [ 0.347552] pci 0000:00:1b.0: PME# disabled
Sep 20 22:03:23 localhost kernel: [ 0.347572] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
Sep 20 22:03:23 localhost kernel: [ 0.347637] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Sep 20 22:03:23 localhost kernel: [ 0.347640] pci 0000:00:1c.0: PME# disabled
Sep 20 22:03:23 localhost kernel: [ 0.347662] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
Sep 20 22:03:23 localhost kernel: [ 0.347726] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Sep 20 22:03:23 localhost kernel: [ 0.347730] pci 0000:00:1c.1: PME# disabled
Sep 20 22:03:23 localhost kernel: [ 0.347765] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
Sep 20 22:03:23 localhost kernel: [ 0.347786] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
Sep 20 22:03:23 localhost kernel: [ 0.347862] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Sep 20 22:03:23 localhost kernel: [ 0.347866] pci 0000:00:1d.0: PME# disabled
Sep 20 22:03:23 localhost kernel: [ 0.347885] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
Sep 20 22:03:23 localhost kernel: [ 0.347942] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601
Sep 20 22:03:23 localhost kernel: [ 0.348055] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
Sep 20 22:03:23 localhost kernel: [ 0.348071] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
Sep 20 22:03:23 localhost kernel: [ 0.348079] pci 0000:00:1f.2: reg 14: [io 0xfd00-0xfd03]
Sep 20 22:03:23 localhost kernel: [ 0.348087] pci 0000:00:1f.2: reg 18: [io 0xfc00-0xfc07]
Sep 20 22:03:23 localhost kernel: [ 0.348095] pci 0000:00:1f.2: reg 1c: [io 0xfb00-0xfb03]
Sep 20 22:03:23 localhost kernel: [ 0.348103] pci 0000:00:1f.2: reg 20: [io 0xfa00-0xfa0f]
Sep 20 22:03:23 localhost kernel: [ 0.348111] pci 0000:00:1f.2: reg 24: [io 0xf900-0xf90f]
Sep 20 22:03:23 localhost kernel: [ 0.348147] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
Sep 20 22:03:23 localhost kernel: [ 0.348163] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit]
Sep 20 22:03:23 localhost kernel: [ 0.348185] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
Sep 20 22:03:23 localhost kernel: [ 0.348217] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
Sep 20 22:03:23 localhost kernel: [ 0.348232] pci 0000:00:1f.5: reg 10: [io 0xf700-0xf707]
Sep 20 22:03:23 localhost kernel: [ 0.348240] pci 0000:00:1f.5: reg 14: [io 0xf600-0xf603]
Sep 20 22:03:23 localhost kernel: [ 0.348248] pci 0000:00:1f.5: reg 18: [io 0xf500-0xf507]
Sep 20 22:03:23 localhost kernel: [ 0.348256] pci 0000:00:1f.5: reg 1c: [io 0xf400-0xf403]
Sep 20 22:03:23 localhost kernel: [ 0.348264] pci 0000:00:1f.5: reg 20: [io 0xf300-0xf30f]
Sep 20 22:03:23 localhost kernel: [ 0.348272] pci 0000:00:1f.5: reg 24: [io 0xf200-0xf20f]
Sep 20 22:03:23 localhost kernel: [ 0.348369] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
Sep 20 22:03:23 localhost kernel: [ 0.348389] pci 0000:01:00.0: reg 10: [io 0xee00-0xeeff]
Sep 20 22:03:23 localhost kernel: [ 0.348424] pci 0000:01:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit pref]
Sep 20 22:03:23 localhost kernel: [ 0.348446] pci 0000:01:00.0: reg 20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
Sep 20 22:03:23 localhost kernel: [ 0.348508] pci 0000:01:00.0: supports D1 D2
Sep 20 22:03:23 localhost kernel: [ 0.348509] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Sep 20 22:03:23 localhost kernel: [ 0.348515] pci 0000:01:00.0: PME# disabled
Sep 20 22:03:23 localhost kernel: [ 0.348558] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
Sep 20 22:03:23 localhost kernel: [ 0.348562] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
Sep 20 22:03:23 localhost kernel: [ 0.348566] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
Sep 20 22:03:23 localhost kernel: [ 0.348572] pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
Sep 20 22:03:23 localhost kernel: [ 0.348642] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
Sep 20 22:03:23 localhost kernel: [ 0.348669] pci 0000:02:00.0: reg 10: [mem 0xfbdfe000-0xfbdfffff 64bit]
Sep 20 22:03:23 localhost kernel: [ 0.348778] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
Sep 20 22:03:23 localhost kernel: [ 0.348783] pci 0000:02:00.0: PME# disabled
Sep 20 22:03:23 localhost kernel: [ 0.348825] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
Sep 20 22:03:23 localhost kernel: [ 0.348829] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
Sep 20 22:03:23 localhost kernel: [ 0.348833] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
Sep 20 22:03:23 localhost kernel: [ 0.348839] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Sep 20 22:03:23 localhost kernel: [ 0.348902] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
Sep 20 22:03:23 localhost kernel: [ 0.348906] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
Sep 20 22:03:23 localhost kernel: [ 0.348910] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
Sep 20 22:03:23 localhost kernel: [ 0.348915] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
Sep 20 22:03:23 localhost kernel: [ 0.348918] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Sep 20 22:03:23 localhost kernel: [ 0.348920] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Sep 20 22:03:23 localhost kernel: [ 0.348922] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Sep 20 22:03:23 localhost kernel: [ 0.348925] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
Sep 20 22:03:23 localhost kernel: [ 0.348927] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfebfffff] (subtractive decode)
Sep 20 22:03:23 localhost kernel: [ 0.348944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Sep 20 22:03:23 localhost kernel: [ 0.349053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Sep 20 22:03:23 localhost kernel: [ 0.349077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
Sep 20 22:03:23 localhost kernel: [ 0.349126] pci0000:00: Requesting ACPI _OSC control (0x1d)
Sep 20 22:03:23 localhost kernel: [ 0.349129] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
Sep 20 22:03:23 localhost kernel: [ 0.349131] ACPI _OSC control for PCIe not granted, disabling ASPM
Sep 20 22:03:23 localhost kernel: [ 0.353783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Sep 20 22:03:23 localhost kernel: [ 0.353820] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
Sep 20 22:03:23 localhost kernel: [ 0.353856] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
Sep 20 22:03:23 localhost kernel: [ 0.353891] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Sep 20 22:03:23 localhost kernel: [ 0.353926] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep 20 22:03:23 localhost kernel: [ 0.353962] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Sep 20 22:03:23 localhost kernel: [ 0.353997] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
Sep 20 22:03:23 localhost kernel: [ 0.354032] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
Sep 20 22:03:23 localhost kernel: [ 0.354105] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Sep 20 22:03:23 localhost kernel: [ 0.354111] vgaarb: loaded
Sep 20 22:03:23 localhost kernel: [ 0.354112] vgaarb: bridge control possible 0000:00:02.0
Sep 20 22:03:23 localhost kernel: [ 0.354179] PCI: Using ACPI for IRQ routing
Sep 20 22:03:23 localhost kernel: [ 0.355801] PCI: pci_cache_line_size set to 64 bytes
Sep 20 22:03:23 localhost kernel: [ 0.355851] reserve RAM buffer: 000000000009f800 - 000000000009ffff
Sep 20 22:03:23 localhost kernel: [ 0.355853] reserve RAM buffer: 00000000cefc0000 - 00000000cfffffff
Sep 20 22:03:23 localhost kernel: [ 0.355856] reserve RAM buffer: 000000011fe00000 - 000000011fffffff
Sep 20 22:03:23 localhost kernel: [ 0.355957] NetLabel: Initializing
Sep 20 22:03:23 localhost kernel: [ 0.355959] NetLabel: domain hash size = 128
Sep 20 22:03:23 localhost kernel: [ 0.355960] NetLabel: protocols = UNLABELED CIPSOv4
Sep 20 22:03:23 localhost kernel: [ 0.355972] NetLabel: unlabeled traffic allowed by default
Sep 20 22:03:23 localhost kernel: [ 0.355986] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Sep 20 22:03:23 localhost kernel: [ 0.355991] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Sep 20 22:03:23 localhost kernel: [ 0.358004] Switching to clocksource hpet
Sep 20 22:03:23 localhost kernel: [ 0.360685] Switched to NOHz mode on CPU #0
Sep 20 22:03:23 localhost kernel: [ 0.360784] Switched to NOHz mode on CPU #1
Sep 20 22:03:23 localhost kernel: [ 0.362963] pnp: PnP ACPI init
Sep 20 22:03:23 localhost kernel: [ 0.362976] ACPI: bus type pnp registered
Sep 20 22:03:23 localhost kernel: [ 0.363048] pnp 00:00: [bus 00-3f]
Sep 20 22:03:23 localhost kernel: [ 0.363051] pnp 00:00: [io 0x0cf8-0x0cff]
Sep 20 22:03:23 localhost kernel: [ 0.363053] pnp 00:00: [io 0x0000-0x0cf7 window]
Sep 20 22:03:23 localhost kernel: [ 0.363055] pnp 00:00: [io 0x0d00-0xffff window]
Sep 20 22:03:23 localhost kernel: [ 0.363056] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Sep 20 22:03:23 localhost kernel: [ 0.363058] pnp 00:00: [mem 0x000c0000-0x000dffff window]
Sep 20 22:03:23 localhost kernel: [ 0.363060] pnp 00:00: [mem 0xdfa00000-0xfebfffff window]
Sep 20 22:03:23 localhost kernel: [ 0.363108] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363172] pnp 00:01: [io 0x0010-0x001f]
Sep 20 22:03:23 localhost kernel: [ 0.363174] pnp 00:01: [io 0x0022-0x003f]
Sep 20 22:03:23 localhost kernel: [ 0.363176] pnp 00:01: [io 0x0044-0x005f]
Sep 20 22:03:23 localhost kernel: [ 0.363177] pnp 00:01: [io 0x0062-0x0063]
Sep 20 22:03:23 localhost kernel: [ 0.363179] pnp 00:01: [io 0x0065-0x006f]
Sep 20 22:03:23 localhost kernel: [ 0.363180] pnp 00:01: [io 0x0074-0x007f]
Sep 20 22:03:23 localhost kernel: [ 0.363182] pnp 00:01: [io 0x0091-0x0093]
Sep 20 22:03:23 localhost kernel: [ 0.363183] pnp 00:01: [io 0x00a2-0x00bf]
Sep 20 22:03:23 localhost kernel: [ 0.363185] pnp 00:01: [io 0x00e0-0x00ef]
Sep 20 22:03:23 localhost kernel: [ 0.363186] pnp 00:01: [io 0x04d0-0x04d1]
Sep 20 22:03:23 localhost kernel: [ 0.363188] pnp 00:01: [io 0x0290-0x029f]
Sep 20 22:03:23 localhost kernel: [ 0.363190] pnp 00:01: [io 0x0800-0x087f]
Sep 20 22:03:23 localhost kernel: [ 0.363191] pnp 00:01: [io 0x0290-0x0294]
Sep 20 22:03:23 localhost kernel: [ 0.363193] pnp 00:01: [io 0x0880-0x088f]
Sep 20 22:03:23 localhost kernel: [ 0.363235] system 00:01: [io 0x04d0-0x04d1] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363237] system 00:01: [io 0x0290-0x029f] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363239] system 00:01: [io 0x0800-0x087f] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363241] system 00:01: [io 0x0290-0x0294] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363243] system 00:01: [io 0x0880-0x088f] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363246] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363256] pnp 00:02: [dma 4]
Sep 20 22:03:23 localhost kernel: [ 0.363257] pnp 00:02: [io 0x0000-0x000f]
Sep 20 22:03:23 localhost kernel: [ 0.363259] pnp 00:02: [io 0x0080-0x0090]
Sep 20 22:03:23 localhost kernel: [ 0.363261] pnp 00:02: [io 0x0094-0x009f]
Sep 20 22:03:23 localhost kernel: [ 0.363262] pnp 00:02: [io 0x00c0-0x00df]
Sep 20 22:03:23 localhost kernel: [ 0.363282] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363321] pnp 00:03: [irq 0 disabled]
Sep 20 22:03:23 localhost kernel: [ 0.363330] pnp 00:03: [irq 8]
Sep 20 22:03:23 localhost kernel: [ 0.363332] pnp 00:03: [mem 0xfed00000-0xfed003ff]
Sep 20 22:03:23 localhost kernel: [ 0.363356] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363376] pnp 00:04: [io 0x0070-0x0073]
Sep 20 22:03:23 localhost kernel: [ 0.363397] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363403] pnp 00:05: [io 0x0061]
Sep 20 22:03:23 localhost kernel: [ 0.363423] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363430] pnp 00:06: [io 0x00f0-0x00ff]
Sep 20 22:03:23 localhost kernel: [ 0.363434] pnp 00:06: [irq 13]
Sep 20 22:03:23 localhost kernel: [ 0.363457] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363550] pnp 00:07: [io 0x0400-0x04cf]
Sep 20 22:03:23 localhost kernel: [ 0.363551] pnp 00:07: [io 0x04d2-0x04ff]
Sep 20 22:03:23 localhost kernel: [ 0.363582] system 00:07: [io 0x0400-0x04cf] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363584] system 00:07: [io 0x04d2-0x04ff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363587] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363596] pnp 00:08: [io 0x1000-0x107f]
Sep 20 22:03:23 localhost kernel: [ 0.363598] pnp 00:08: [io 0x1080-0x10ff]
Sep 20 22:03:23 localhost kernel: [ 0.363599] pnp 00:08: [io 0x1100-0x117f]
Sep 20 22:03:23 localhost kernel: [ 0.363601] pnp 00:08: [io 0x1180-0x11ff]
Sep 20 22:03:23 localhost kernel: [ 0.363632] system 00:08: [io 0x1000-0x107f] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363635] system 00:08: [io 0x1080-0x10ff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363637] system 00:08: [io 0x1100-0x117f] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363639] system 00:08: [io 0x1180-0x11ff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363642] system 00:08: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363777] pnp 00:09: [io 0x0454-0x0457]
Sep 20 22:03:23 localhost kernel: [ 0.363818] system 00:09: [io 0x0454-0x0457] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363820] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Sep 20 22:03:23 localhost kernel: [ 0.363834] pnp 00:0a: [mem 0xf4000000-0xf7ffffff]
Sep 20 22:03:23 localhost kernel: [ 0.363871] system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.363874] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Sep 20 22:03:23 localhost kernel: [ 0.364007] pnp 00:0b: [mem 0x000cda00-0x000cffff]
Sep 20 22:03:23 localhost kernel: [ 0.364009] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
Sep 20 22:03:23 localhost kernel: [ 0.364011] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
Sep 20 22:03:23 localhost kernel: [ 0.364012] pnp 00:0b: [mem 0x000fc000-0x000fffff]
Sep 20 22:03:23 localhost kernel: [ 0.364014] pnp 00:0b: [mem 0xcefc0000-0xcefcffff]
Sep 20 22:03:23 localhost kernel: [ 0.364016] pnp 00:0b: [mem 0x00000000-0x0009ffff]
Sep 20 22:03:23 localhost kernel: [ 0.364017] pnp 00:0b: [mem 0x00100000-0xcefbffff]
Sep 20 22:03:23 localhost kernel: [ 0.364019] pnp 00:0b: [mem 0xcefd0000-0xcefeffff]
Sep 20 22:03:23 localhost kernel: [ 0.364021] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
Sep 20 22:03:23 localhost kernel: [ 0.364022] pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
Sep 20 22:03:23 localhost kernel: [ 0.364024] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
Sep 20 22:03:23 localhost kernel: [ 0.364026] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
Sep 20 22:03:23 localhost kernel: [ 0.364027] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
Sep 20 22:03:23 localhost kernel: [ 0.364029] pnp 00:0b: [mem 0xfff00000-0xffffffff]
Sep 20 22:03:23 localhost kernel: [ 0.364031] pnp 00:0b: [mem 0x000e0000-0x000effff]
Sep 20 22:03:23 localhost kernel: [ 0.364033] pnp 00:0b: [mem 0x20000000-0x201fffff]
Sep 20 22:03:23 localhost kernel: [ 0.364034] pnp 00:0b: [mem 0x40000000-0x400fffff]
Sep 20 22:03:23 localhost kernel: [ 0.364036] pnp 00:0b: [mem 0xcf000000-0xdf9fffff]
Sep 20 22:03:23 localhost kernel: [ 0.364079] system 00:0b: [mem 0x000cda00-0x000cffff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.364081] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364083] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364086] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364088] system 00:0b: [mem 0xcefc0000-0xcefcffff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364090] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364093] system 00:0b: [mem 0x00100000-0xcefbffff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364095] system 00:0b: [mem 0xcefd0000-0xcefeffff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364097] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364100] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.364102] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.364104] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.364108] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.364111] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.364113] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
Sep 20 22:03:23 localhost kernel: [ 0.364115] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364117] system 00:0b: [mem 0x40000000-0x400fffff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364120] system 00:0b: [mem 0xcf000000-0xdf9fffff] could not be reserved
Sep 20 22:03:23 localhost kernel: [ 0.364122] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
Sep 20 22:03:23 localhost kernel: [ 0.364136] pnp 00:0c: [mem 0xffb80000-0xffbfffff]
Sep 20 22:03:23 localhost kernel: [ 0.364164] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
Sep 20 22:03:23 localhost kernel: [ 0.364169] pnp: PnP ACPI: found 13 devices
Sep 20 22:03:23 localhost kernel: [ 0.364170] ACPI: ACPI bus type pnp unregistered
Sep 20 22:03:23 localhost kernel: [ 0.369924] PCI: max bus depth: 1 pci_try_num: 2
Sep 20 22:03:23 localhost kernel: [ 0.369950] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
Sep 20 22:03:23 localhost kernel: [ 0.369954] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
Sep 20 22:03:23 localhost kernel: [ 0.369958] pci 0000:00:1c.0: bridge window [mem disabled]
Sep 20 22:03:23 localhost kernel: [ 0.369963] pci 0000:00:1c.0: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
Sep 20 22:03:23 localhost kernel: [ 0.369969] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
Sep 20 22:03:23 localhost kernel: [ 0.369971] pci 0000:00:1c.1: bridge window [io disabled]
Sep 20 22:03:23 localhost kernel: [ 0.369976] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
Sep 20 22:03:23 localhost kernel: [ 0.369980] pci 0000:00:1c.1: bridge window [mem pref disabled]
Sep 20 22:03:23 localhost kernel: [ 0.369986] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
Sep 20 22:03:23 localhost kernel: [ 0.369987] pci 0000:00:1e.0: bridge window [io disabled]
Sep 20 22:03:23 localhost kernel: [ 0.369992] pci 0000:00:1e.0: bridge window [mem disabled]
Sep 20 22:03:23 localhost kernel: [ 0.369995] pci 0000:00:1e.0: bridge window [mem pref disabled]
Sep 20 22:03:23 localhost kernel: [ 0.370010] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 20 22:03:23 localhost kernel: [ 0.370014] pci 0000:00:1c.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 0.370022] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Sep 20 22:03:23 localhost kernel: [ 0.370026] pci 0000:00:1c.1: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 0.370033] pci 0000:00:1e.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 0.370037] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Sep 20 22:03:23 localhost kernel: [ 0.370039] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Sep 20 22:03:23 localhost kernel: [ 0.370041] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Sep 20 22:03:23 localhost kernel: [ 0.370043] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
Sep 20 22:03:23 localhost kernel: [ 0.370045] pci_bus 0000:00: resource 8 [mem 0xdfa00000-0xfebfffff]
Sep 20 22:03:23 localhost kernel: [ 0.370047] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
Sep 20 22:03:23 localhost kernel: [ 0.370049] pci_bus 0000:01: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
Sep 20 22:03:23 localhost kernel: [ 0.370051] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
Sep 20 22:03:23 localhost kernel: [ 0.370054] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
Sep 20 22:03:23 localhost kernel: [ 0.370055] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
Sep 20 22:03:23 localhost kernel: [ 0.370057] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
Sep 20 22:03:23 localhost kernel: [ 0.370059] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
Sep 20 22:03:23 localhost kernel: [ 0.370061] pci_bus 0000:03: resource 8 [mem 0xdfa00000-0xfebfffff]
Sep 20 22:03:23 localhost kernel: [ 0.370126] NET: Registered protocol family 2
Sep 20 22:03:23 localhost kernel: [ 0.370300] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.371262] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.373429] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.373699] TCP: Hash tables configured (established 524288 bind 65536)
Sep 20 22:03:23 localhost kernel: [ 0.373701] TCP reno registered
Sep 20 22:03:23 localhost kernel: [ 0.373710] UDP hash table entries: 2048 (order: 4, 65536 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.373737] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.373969] NET: Registered protocol family 1
Sep 20 22:03:23 localhost kernel: [ 0.373983] pci 0000:00:02.0: Boot video device
Sep 20 22:03:23 localhost kernel: [ 0.398047] PCI: CLS 4 bytes, default 64
Sep 20 22:03:23 localhost kernel: [ 0.398088] Unpacking initramfs...
Sep 20 22:03:23 localhost kernel: [ 0.426689] Freeing initrd memory: 2168k freed
Sep 20 22:03:23 localhost kernel: [ 0.426970] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Sep 20 22:03:23 localhost kernel: [ 0.426973] Placing 64MB software IO TLB between ffff8800cafba000 - ffff8800cefba000
Sep 20 22:03:23 localhost kernel: [ 0.426975] software IO TLB at phys 0xcafba000 - 0xcefba000
Sep 20 22:03:23 localhost kernel: [ 0.427316] audit: initializing netlink socket (disabled)
Sep 20 22:03:23 localhost kernel: [ 0.427326] type=2000 audit(1316548996.299:1): initialized
Sep 20 22:03:23 localhost kernel: [ 0.434509] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Sep 20 22:03:23 localhost kernel: [ 0.449490] VFS: Disk quotas dquot_6.5.2
Sep 20 22:03:23 localhost kernel: [ 0.449608] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Sep 20 22:03:23 localhost kernel: [ 0.449752] msgmni has been set to 7384
Sep 20 22:03:23 localhost kernel: [ 0.449933] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Sep 20 22:03:23 localhost kernel: [ 0.449962] io scheduler noop registered
Sep 20 22:03:23 localhost kernel: [ 0.449963] io scheduler deadline registered
Sep 20 22:03:23 localhost kernel: [ 0.450004] io scheduler cfq registered (default)
Sep 20 22:03:23 localhost kernel: [ 0.450245] intel_idle: MWAIT substates: 0x1120
Sep 20 22:03:23 localhost kernel: [ 0.450247] intel_idle: v0.4 model 0x2A
Sep 20 22:03:23 localhost kernel: [ 0.450248] intel_idle: lapic_timer_reliable_states 0xffffffff
Sep 20 22:03:23 localhost kernel: [ 0.450273] ERST: Table is not found!
Sep 20 22:03:23 localhost kernel: [ 0.450329] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Sep 20 22:03:23 localhost kernel: [ 0.558022] Linux agpgart interface v0.103
Sep 20 22:03:23 localhost kernel: [ 0.558079] i8042: PNP: No PS/2 controller found. Probing ports directly.
Sep 20 22:03:23 localhost kernel: [ 0.590667] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
Sep 20 22:03:23 localhost kernel: [ 0.590668] i8042: If AUX port is really absent please use the 'i8042.noaux' option
Sep 20 22:03:23 localhost kernel: [ 0.837609] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 20 22:03:23 localhost kernel: [ 0.837680] mousedev: PS/2 mouse device common for all mice
Sep 20 22:03:23 localhost kernel: [ 0.837730] rtc_cmos 00:04: RTC can wake from S4
Sep 20 22:03:23 localhost kernel: [ 0.837818] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Sep 20 22:03:23 localhost kernel: [ 0.837845] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
Sep 20 22:03:23 localhost kernel: [ 0.837893] cpuidle: using governor ladder
Sep 20 22:03:23 localhost kernel: [ 0.837961] cpuidle: using governor menu
Sep 20 22:03:23 localhost kernel: [ 0.838115] TCP cubic registered
Sep 20 22:03:23 localhost kernel: [ 0.838117] NET: Registered protocol family 17
Sep 20 22:03:23 localhost kernel: [ 0.838123] Registering the dns_resolver key type
Sep 20 22:03:23 localhost kernel: [ 0.838190] PM: Hibernation image not present or could not be loaded.
Sep 20 22:03:23 localhost kernel: [ 0.838194] registered taskstats version 1
Sep 20 22:03:23 localhost kernel: [ 0.845299] rtc_cmos 00:04: setting system clock to 2011-09-20 20:03:17 UTC (1316548997)
Sep 20 22:03:23 localhost kernel: [ 0.845335] Initializing network drop monitor service
Sep 20 22:03:23 localhost kernel: [ 0.846647] Freeing unused kernel memory: 712k freed
Sep 20 22:03:23 localhost kernel: [ 0.846728] Write protecting the kernel read-only data: 6144k
Sep 20 22:03:23 localhost kernel: [ 0.846951] Freeing unused kernel memory: 12k freed
Sep 20 22:03:23 localhost kernel: [ 0.849311] Freeing unused kernel memory: 776k freed
Sep 20 22:03:23 localhost [ 0.864698] udevd[68]: starting version 173
Sep 20 22:03:23 localhost kernel: [ 0.909430] SCSI subsystem initialized
Sep 20 22:03:23 localhost kernel: [ 0.911819] usbcore: registered new interface driver usbfs
Sep 20 22:03:23 localhost kernel: [ 0.911854] usbcore: registered new interface driver hub
Sep 20 22:03:23 localhost kernel: [ 0.914159] usbcore: registered new device driver usb
Sep 20 22:03:23 localhost kernel: [ 0.916238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sep 20 22:03:23 localhost kernel: [ 0.916267] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep 20 22:03:23 localhost kernel: [ 0.916292] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 0.916295] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Sep 20 22:03:23 localhost kernel: [ 0.916331] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Sep 20 22:03:23 localhost kernel: [ 0.916359] ehci_hcd 0000:00:1a.0: debug port 2
Sep 20 22:03:23 localhost kernel: [ 0.921431] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
Sep 20 22:03:23 localhost kernel: [ 0.921450] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
Sep 20 22:03:23 localhost kernel: [ 0.927320] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Sep 20 22:03:23 localhost kernel: [ 0.927347] xhci_hcd 0000:02:00.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 0.927351] xhci_hcd 0000:02:00.0: xHCI Host Controller
Sep 20 22:03:23 localhost kernel: [ 0.927361] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
Sep 20 22:03:23 localhost kernel: [ 0.927613] xhci_hcd 0000:02:00.0: irq 17, io mem 0xfbdfe000
Sep 20 22:03:23 localhost kernel: [ 0.927679] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
Sep 20 22:03:23 localhost kernel: [ 0.927682] xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
Sep 20 22:03:23 localhost kernel: [ 0.927685] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
Sep 20 22:03:23 localhost kernel: [ 0.928539] libata version 3.00 loaded.
Sep 20 22:03:23 localhost kernel: [ 0.929903] xHCI xhci_add_endpoint called for root hub
Sep 20 22:03:23 localhost kernel: [ 0.929905] xHCI xhci_check_bandwidth called for root hub
Sep 20 22:03:23 localhost kernel: [ 0.929933] hub 2-0:1.0: USB hub found
Sep 20 22:03:23 localhost kernel: [ 0.929940] hub 2-0:1.0: 2 ports detected
Sep 20 22:03:23 localhost kernel: [ 0.930015] xhci_hcd 0000:02:00.0: xHCI Host Controller
Sep 20 22:03:23 localhost kernel: [ 0.930022] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
Sep 20 22:03:23 localhost kernel: [ 0.931051] xHCI xhci_add_endpoint called for root hub
Sep 20 22:03:23 localhost kernel: [ 0.931052] xHCI xhci_check_bandwidth called for root hub
Sep 20 22:03:23 localhost kernel: [ 0.931088] hub 3-0:1.0: USB hub found
Sep 20 22:03:23 localhost kernel: [ 0.931096] hub 3-0:1.0: 2 ports detected
Sep 20 22:03:23 localhost kernel: [ 0.937409] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Sep 20 22:03:23 localhost kernel: [ 0.937531] hub 1-0:1.0: USB hub found
Sep 20 22:03:23 localhost kernel: [ 0.937534] hub 1-0:1.0: 2 ports detected
Sep 20 22:03:23 localhost kernel: [ 0.937598] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Sep 20 22:03:23 localhost kernel: [ 0.937648] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 0.937651] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Sep 20 22:03:23 localhost kernel: [ 0.937658] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
Sep 20 22:03:23 localhost kernel: [ 0.937682] ehci_hcd 0000:00:1d.0: debug port 2
Sep 20 22:03:23 localhost kernel: [ 0.941560] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
Sep 20 22:03:23 localhost kernel: [ 0.941575] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
Sep 20 22:03:23 localhost kernel: [ 0.954063] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Sep 20 22:03:23 localhost kernel: [ 0.954189] hub 4-0:1.0: USB hub found
Sep 20 22:03:23 localhost kernel: [ 0.954193] hub 4-0:1.0: 2 ports detected
Sep 20 22:03:23 localhost kernel: [ 0.954246] ata_piix 0000:00:1f.2: version 2.13
Sep 20 22:03:23 localhost kernel: [ 0.954260] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Sep 20 22:03:23 localhost kernel: [ 0.954265] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Sep 20 22:03:23 localhost kernel: [ 0.954301] ata_piix 0000:00:1f.2: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 0.954603] scsi0 : ata_piix
Sep 20 22:03:23 localhost kernel: [ 0.954871] scsi1 : ata_piix
Sep 20 22:03:23 localhost kernel: [ 0.955226] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19
Sep 20 22:03:23 localhost kernel: [ 0.955231] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19
Sep 20 22:03:23 localhost kernel: [ 0.955248] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Sep 20 22:03:23 localhost kernel: [ 0.955252] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Sep 20 22:03:23 localhost kernel: [ 0.955277] ata_piix 0000:00:1f.5: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 0.955539] scsi2 : ata_piix
Sep 20 22:03:23 localhost kernel: [ 0.956233] scsi3 : ata_piix
Sep 20 22:03:23 localhost kernel: [ 0.956532] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
Sep 20 22:03:23 localhost kernel: [ 0.956536] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
Sep 20 22:03:23 localhost kernel: [ 1.233774] usb 2-1: new high speed USB device number 2 using xhci_hcd
Sep 20 22:03:23 localhost kernel: [ 1.278583] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
Sep 20 22:03:23 localhost kernel: [ 1.284606] ata4: SATA link down (SStatus 0 SControl 300)
Sep 20 22:03:23 localhost kernel: [ 1.295514] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
Sep 20 22:03:23 localhost kernel: [ 1.295535] ata3: SATA link down (SStatus 0 SControl 300)
Sep 20 22:03:23 localhost kernel: [ 1.310671] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
Sep 20 22:03:23 localhost kernel: [ 1.416898] usb 1-1: new high speed USB device number 2 using ehci_hcd
Sep 20 22:03:23 localhost kernel: [ 1.426888] Refined TSC clocksource calibration: 2195.014 MHz.
Sep 20 22:03:23 localhost kernel: [ 1.426895] Switching to clocksource tsc
Sep 20 22:03:23 localhost kernel: [ 1.540857] hub 1-1:1.0: USB hub found
Sep 20 22:03:23 localhost kernel: [ 1.541031] hub 1-1:1.0: 6 ports detected
Sep 20 22:03:23 localhost kernel: [ 1.614241] ata1.00: SATA link down (SStatus 0 SControl 300)
Sep 20 22:03:23 localhost kernel: [ 1.614256] ata1.01: SATA link down (SStatus 0 SControl 300)
Sep 20 22:03:23 localhost kernel: [ 1.646640] usb 4-1: new high speed USB device number 2 using ehci_hcd
Sep 20 22:03:23 localhost kernel: [ 1.746592] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Sep 20 22:03:23 localhost kernel: [ 1.746604] ata2.01: SATA link down (SStatus 0 SControl 300)
Sep 20 22:03:23 localhost kernel: [ 1.753503] ata2.00: ATA-7: ST3300831AS, 3.01, max UDMA/133
Sep 20 22:03:23 localhost kernel: [ 1.753521] ata2.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
Sep 20 22:03:23 localhost kernel: [ 1.766822] ata2.00: configured for UDMA/133
Sep 20 22:03:23 localhost kernel: [ 1.767075] scsi 1:0:0:0: Direct-Access ATA ST3300831AS 3.01 PQ: 0 ANSI: 5
Sep 20 22:03:23 localhost kernel: [ 1.770273] hub 4-1:1.0: USB hub found
Sep 20 22:03:23 localhost kernel: [ 1.770386] hub 4-1:1.0: 8 ports detected
Sep 20 22:03:23 localhost kernel: [ 1.771254] sd 1:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
Sep 20 22:03:23 localhost kernel: [ 1.771291] sd 1:0:0:0: [sda] Write Protect is off
Sep 20 22:03:23 localhost kernel: [ 1.771293] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Sep 20 22:03:23 localhost kernel: [ 1.771309] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 20 22:03:23 localhost kernel: [ 1.799906] sda: sda1 sda2 sda3 sda4
Sep 20 22:03:23 localhost kernel: [ 1.800196] sd 1:0:0:0: [sda] Attached SCSI disk
Sep 20 22:03:23 localhost kernel: [ 1.836588] usb 1-1.1: new full speed USB device number 3 using ehci_hcd
Sep 20 22:03:23 localhost kernel: [ 1.922236] hub 1-1.1:1.0: USB hub found
Sep 20 22:03:23 localhost kernel: [ 1.922453] hub 1-1.1:1.0: 5 ports detected
Sep 20 22:03:23 localhost kernel: [ 1.922579] hub 1-1.1:1.0: insufficient power available to use all downstream ports
Sep 20 22:03:23 localhost kernel: [ 1.989636] usb 1-1.2: new full speed USB device number 4 using ehci_hcd
Sep 20 22:03:23 localhost kernel: [ 2.312414] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
Sep 20 22:03:23 localhost kernel: [ 2.369378] usb 1-1.4: new low speed USB device number 5 using ehci_hcd
Sep 20 22:03:23 localhost kernel: [ 2.535792] usb 1-1.1.1: new low speed USB device number 6 using ehci_hcd
Sep 20 22:03:23 localhost kernel: [ 2.725602] usb 1-1.1.3: new full speed USB device number 7 using ehci_hcd
Sep 20 22:03:23 localhost kernel: [ 2.902162] usb 1-1.1.5: new full speed USB device number 8 using ehci_hcd
Sep 20 22:03:23 localhost [ 3.191556] udevd[260]: starting version 173
Sep 20 22:03:23 localhost kernel: [ 3.373380] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
Sep 20 22:03:23 localhost kernel: [ 3.373387] ACPI: Power Button [PWRB]
Sep 20 22:03:23 localhost kernel: [ 3.373447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
Sep 20 22:03:23 localhost kernel: [ 3.373451] ACPI: Power Button [PWRF]
Sep 20 22:03:23 localhost kernel: [ 3.388553] iTCO_vendor_support: vendor-support=0
Sep 20 22:03:23 localhost kernel: [ 3.405120] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
Sep 20 22:03:23 localhost kernel: [ 3.405207] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Sep 20 22:03:23 localhost kernel: [ 3.437882] input: PC Speaker as /devices/platform/pcspkr/input/input2
Sep 20 22:03:23 localhost kernel: [ 3.438268] sd 1:0:0:0: Attached scsi generic sg0 type 0
Sep 20 22:03:23 localhost kernel: [ 3.461890] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Sep 20 22:03:23 localhost kernel: [ 3.470953] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
Sep 20 22:03:23 localhost kernel: [ 3.471053] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
Sep 20 22:03:23 localhost kernel: [ 3.471863] agpgart-intel 0000:00:00.0: detected 262144K stolen memory
Sep 20 22:03:23 localhost kernel: [ 3.471971] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
Sep 20 22:03:23 localhost kernel: [ 3.493746] [drm] Initialized drm 1.1.0 20060810
Sep 20 22:03:23 localhost kernel: [ 3.511832] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 20 22:03:23 localhost kernel: [ 3.511836] i915 0000:00:02.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 3.556613] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
Sep 20 22:03:23 localhost kernel: [ 3.556616] [drm] MTRR allocation failed. Graphics performance may suffer.
Sep 20 22:03:23 localhost kernel: [ 3.556859] i915 0000:00:02.0: irq 43 for MSI/MSI-X
Sep 20 22:03:23 localhost kernel: [ 3.556864] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Sep 20 22:03:23 localhost kernel: [ 3.556865] [drm] Driver supports precise vblank timestamp query.
Sep 20 22:03:23 localhost kernel: [ 3.556897] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
Sep 20 22:03:23 localhost kernel: [ 3.583923] Bluetooth: Core ver 2.16
Sep 20 22:03:23 localhost kernel: [ 3.584062] NET: Registered protocol family 31
Sep 20 22:03:23 localhost kernel: [ 3.584064] Bluetooth: HCI device and connection manager initialized
Sep 20 22:03:23 localhost kernel: [ 3.584066] Bluetooth: HCI socket layer initialized
Sep 20 22:03:23 localhost kernel: [ 3.584067] Bluetooth: L2CAP socket layer initialized
Sep 20 22:03:23 localhost kernel: [ 3.584162] Bluetooth: SCO socket layer initialized
Sep 20 22:03:23 localhost kernel: [ 3.592131] Bluetooth: Generic Bluetooth USB driver ver 0.6
Sep 20 22:03:23 localhost kernel: [ 3.592440] usbcore: registered new interface driver btusb
Sep 20 22:03:23 localhost kernel: [ 3.598843] Initializing USB Mass Storage driver...
Sep 20 22:03:23 localhost kernel: [ 3.598915] scsi4 : usb-storage 2-1:1.0
Sep 20 22:03:23 localhost kernel: [ 3.599011] usbcore: registered new interface driver usb-storage
Sep 20 22:03:23 localhost kernel: [ 3.599013] USB Mass Storage support registered.
Sep 20 22:03:23 localhost kernel: [ 3.613860] ACPI: acpi_idle yielding to intel_idle
Sep 20 22:03:23 localhost kernel: [ 3.622653] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input3
Sep 20 22:03:23 localhost kernel: [ 3.622811] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.4/input0
Sep 20 22:03:23 localhost kernel: [ 3.632355] usbcore: registered new interface driver uas
Sep 20 22:03:23 localhost kernel: [ 3.649446] input: Chicony IR Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input4
Sep 20 22:03:23 localhost kernel: [ 3.649575] generic-usb 0003:1631:0006.0002: input,hiddev0,hidraw1: USB HID v1.10 Keyboard [Chicony IR Receiver] on usb-0000:00:1a.0-1.1.1/input0
Sep 20 22:03:23 localhost kernel: [ 3.650928] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.5/1-1.1.5:1.0/input/input5
Sep 20 22:03:23 localhost kernel: [ 3.650988] generic-usb 0003:1631:0510.0003: input,hidraw2: USB HID v1.10 Keyboard [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-1.1.5/input0
Sep 20 22:03:23 localhost kernel: [ 3.653482] input: Chicony USB HUB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.5/1-1.1.5:1.1/input/input6
Sep 20 22:03:23 localhost kernel: [ 3.653648] generic-usb 0003:1631:0510.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Chicony USB HUB Keyboard ] on usb-0000:00:1a.0-1.1.5/input1
Sep 20 22:03:23 localhost kernel: [ 3.653779] usbcore: registered new interface driver usbhid
Sep 20 22:03:23 localhost kernel: [ 3.653781] usbhid: USB HID core driver
Sep 20 22:03:23 localhost kernel: [ 3.660698] mei: module is from the staging directory, the quality is unknown, you have been warned.
Sep 20 22:03:23 localhost kernel: [ 3.718285] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Sep 20 22:03:23 localhost kernel: [ 3.718304] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 20 22:03:23 localhost kernel: [ 3.718360] r8169 0000:01:00.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 3.718367] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
Sep 20 22:03:23 localhost kernel: [ 3.718443] r8169 0000:01:00.0: irq 44 for MSI/MSI-X
Sep 20 22:03:23 localhost kernel: [ 3.718637] r8169 0000:01:00.0: eth0: RTL8168b/8111b at 0xffffc90000658000, 1c:6f:65:c3:ce:db, XID 0c900800 IRQ 44
Sep 20 22:03:23 localhost kernel: [ 3.813118] fbcon: inteldrmfb (fb0) is primary device
Sep 20 22:03:23 localhost kernel: [ 3.979984] Console: switching to colour frame buffer device 160x64
Sep 20 22:03:23 localhost kernel: [ 3.983168] fb0: inteldrmfb frame buffer device
Sep 20 22:03:23 localhost kernel: [ 3.983169] drm: registered panic notifier
Sep 20 22:03:23 localhost kernel: [ 3.983231] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep 20 22:03:23 localhost kernel: [ 3.983377] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Sep 20 22:03:23 localhost kernel: [ 3.983384] mei 0000:00:16.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 3.989172] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Sep 20 22:03:23 localhost kernel: [ 3.989224] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
Sep 20 22:03:23 localhost kernel: [ 3.989245] HDA Intel 0000:00:1b.0: setting latency timer to 64
Sep 20 22:03:23 localhost kernel: [ 4.546823] hda_codec: ALC889: BIOS auto-probing.
Sep 20 22:03:23 localhost kernel: [ 4.550541] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
Sep 20 22:03:23 localhost kernel: [ 4.550994] HDMI status: Pin=7 Presence_Detect=0 ELD_Valid=0
Sep 20 22:03:23 localhost kernel: [ 4.554427] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
Sep 20 22:03:23 localhost kernel: [ 4.554477] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Sep 20 22:03:23 localhost kernel: [ 4.554522] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Sep 20 22:03:23 localhost kernel: [ 4.598564] scsi 4:0:0:0: CD-ROM BENQ DVD DD DW1640 BSJB PQ: 0 ANSI: 0
Sep 20 22:03:23 localhost kernel: [ 4.598692] scsi 4:0:0:0: Attached scsi generic sg1 type 5
Sep 20 22:03:23 localhost kernel: [ 4.637889] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
Sep 20 22:03:23 localhost kernel: [ 4.638495] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Sep 20 22:03:23 localhost kernel: [ 4.638499] cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 20 22:03:23 localhost kernel: [ 4.638634] sr 4:0:0:0: Attached scsi CD-ROM sr0
Sep 20 22:03:23 localhost kernel: [ 4.775609] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
Sep 20 22:03:23 localhost kernel: [ 4.778484] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
Sep 20 22:03:23 localhost kernel: [ 4.781568] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
Sep 20 22:03:23 localhost kernel: [ 4.803401] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
Sep 20 22:03:23 localhost kernel: [ 4.806492] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
Sep 20 22:03:23 localhost kernel: [ 5.448849] EXT4-fs (sda3): re-mounted. Opts: (null)
Sep 20 22:03:23 localhost kernel: [ 5.813570] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Sep 20 22:03:23 localhost kernel: [ 5.937456] Adding 1028156k swap on /dev/sda2. Priority:-1 extents:1 across:1028156k
Sep 20 22:03:23 localhost kernel: [ 7.261121] r8169 0000:01:00.0: eth0: link down
Sep 20 22:03:23 localhost kernel: [ 7.261129] r8169 0000:01:00.0: eth0: link down
Sep 20 22:03:23 localhost dhcpcd[833]: version 5.2.12 starting
Sep 20 22:03:23 localhost dhcpcd[833]: eth0: waiting for carrier
Sep 20 22:03:26 localhost dhcpcd[833]: eth0: carrier acquired
Sep 20 22:03:26 localhost kernel: [ 9.860297] r8169 0000:01:00.0: eth0: link up
Sep 20 22:03:26 localhost dhcpcd[833]: eth0: rebinding lease of 192.168.99.105
Sep 20 22:03:31 localhost dhcpcd[833]: eth0: acknowledged 192.168.99.105 from 192.168.99.1
Sep 20 22:03:31 localhost dhcpcd[833]: eth0: checking for 192.168.99.105
Sep 20 22:03:36 localhost dhcpcd[833]: eth0: leased 192.168.99.105 for 345600 seconds
Sep 20 22:03:36 localhost dhcpcd[833]: forked to background, child pid 861
Sep 20 22:03:36 localhost /usr/sbin/crond[910]: (CRON) STARTUP (1.4.8)
Sep 20 22:03:36 localhost /usr/sbin/crond[910]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
Sep 20 22:03:36 localhost /usr/sbin/crond[910]: (CRON) INFO (running with inotify support)
Sep 20 22:03:37 localhost kernel: [ 20.421529] NET: Registered protocol family 10
Sep 20 22:03:38 localhost kernel: [ 21.326289] Linux media interface: v0.10
Sep 20 22:03:38 localhost kernel: [ 21.332187] Linux video capture interface: v2.00
Sep 20 22:03:38 localhost kernel: [ 21.364756] saa7146: register extension 'av7110'.
Sep 20 22:03:38 localhost vdr: [1074] VDR version 1.7.21 started
Sep 20 22:03:38 localhost vdr: [1074] switched to user 'vdr'
Sep 20 22:03:38 localhost vdr: [1074] codeset is 'UTF-8' - known
Sep 20 22:03:38 localhost vdr: [1074] found 0 locales in /usr/share/locale
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'deu,ger'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'slv,slo'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'ita'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'dut,nla,nld'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'prt'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'fra,fre'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'nor'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'fin,suo'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'pol'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'esl,spa'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'ell,gre'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'sve,swe'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'rom,rum'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'hun'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'cat,cln'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'rus'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'srb,srp,scr,scc'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'hrv'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'est'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'dan'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'cze,ces'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'tur'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'ukr'
Sep 20 22:03:38 localhost vdr: [1074] no locale for language code 'ara'
Sep 20 22:03:38 localhost vdr: [1074] loading plugin: /usr/lib/vdr/plugins/libvdr-streamdev-client.so.1.7.21
Sep 20 22:03:38 localhost vdr: [1074] loading plugin: /usr/lib/vdr/plugins/libvdr-signal.so.1.7.21
Sep 20 22:03:38 localhost vdr: [1074] loading plugin: /usr/lib/vdr/plugins/libvdr-streamdev-server.so.1.7.21
Sep 20 22:03:38 localhost vdr: [1074] loading plugin: /usr/lib/vdr/plugins/libvdr-dvbsddevice.so.1.7.21
Sep 20 22:03:38 localhost vdr: [1074] loading plugin: /usr/lib/vdr/plugins/libvdr-text2skin.so.1.7.21
Sep 20 22:03:38 localhost vdr: [1074] loading plugin: /usr/lib/vdr/plugins/libvdr-xine.so.1.7.21
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/setup.conf
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ChannelBlocker = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ChannelBlockerList =
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ChannelBlockerMode = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: CustomMainMenuTitle = Video Disk Recorder
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: CutterAutoDelete = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: CutTime = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: CutTimePatchEnabled = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: DolbyTransferFix = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: DvdDisplayMode = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: DvdDisplayZeros = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: DvdSpeedLimit = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: DvdTrayMode = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ExtendBuffer = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: InRAM = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: KeepPaused = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: LiveBuffer = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: LiveBufferSize = 100
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: LRChannelGroups = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: LRForwardRewind = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: LRVolumeControl = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: MainMenuTitle = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: MemBufSize = 5
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: MenuCmdPosition = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: nVidPrefer = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: RecordDolbyDigital = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: RecordingsSortDirsFirst = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: RecordingsSortMode = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ShowProgressBar = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ShowRecDate = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ShowRecLength = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ShowRecTime = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ShowTimerStop = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: ShowValidInput = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: SoftOsdFadeinSteps = 6
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: SoftOsdFadeoutSteps = 16
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: SoftOsdPaletteOnly = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: SoftOsdRate = 50
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: SupportTeletext = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: UseDolbyInRecordings = 1
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: UseFriendlyFNames = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: UseSoftOsd = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: UseSyncEarlyPatch = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: UseVidPrefer = 0
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: VidPreferPrio0 = 50
Sep 20 22:03:38 localhost vdr: [1074] ERROR: unknown config parameter: VidPreferSize0 = 800
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/sources.conf
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/diseqc.conf
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/channels.conf
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/commands.conf
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/reccmds.conf
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/svdrphosts.conf
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/remote.conf
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/keymacros.conf
Sep 20 22:03:38 localhost vdr: [1074] reading EPG data from /var/cache/vdr/epg.data
Sep 20 22:03:38 localhost vdr: [1074] registered source parameters for 'A - ATSC'
Sep 20 22:03:38 localhost vdr: [1074] registered source parameters for 'C - DVB-C'
Sep 20 22:03:38 localhost vdr: [1074] registered source parameters for 'S - DVB-S'
Sep 20 22:03:38 localhost vdr: [1074] registered source parameters for 'T - DVB-T'
Sep 20 22:03:38 localhost vdr: [1074] no DVB device found
Sep 20 22:03:38 localhost vdr: [1074] initializing plugin: streamdev-client (0.5.1-git): VTP Streaming Client
Sep 20 22:03:38 localhost vdr: [1074] initializing plugin: signal (0.0.1): Enter description for 'signal' plugin
Sep 20 22:03:38 localhost vdr: [1074] initializing plugin: streamdev-server (0.5.1-git): VDR Streaming Server
Sep 20 22:03:38 localhost vdr: [1074] initializing plugin: dvbsddevice (0.0.5): SD Full Featured DVB device
Sep 20 22:03:38 localhost vdr: [1074] initializing plugin: text2skin (1.3.1): Loader for text-based skins
Sep 20 22:03:38 localhost vdr: [1074] initializing plugin: xine (0.9.4): Software based playback using xine
Sep 20 22:03:38 localhost vdr: [1074] new device number 9
Sep 20 22:03:38 localhost vdr: [1077] XineRemote control thread started (pid=1074, tid=1077)
Sep 20 22:03:38 localhost vdr: [1077] Entering cXineRemote thread
Sep 20 22:03:38 localhost vdr: [1076] video directory scanner thread started (pid=1074, tid=1076)
Sep 20 22:03:38 localhost vdr: [1075] video directory scanner thread started (pid=1074, tid=1075)
Sep 20 22:03:38 localhost vdr: [1074] ERROR: invalid primary device number: 2
Sep 20 22:03:38 localhost vdr: [1074] trying device number 1 instead
Sep 20 22:03:38 localhost vdr: [1074] setting primary device to 1
Sep 20 22:03:38 localhost vdr: [1074] assuming manual start of VDR
Sep 20 22:03:38 localhost vdr: [1074] SVDRP listening on port 2001
Sep 20 22:03:38 localhost vdr: [1074] skin "spockele" not available - using "classic" instead
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/themes/classic-default.theme
Sep 20 22:03:38 localhost vdr: [1074] starting plugin: streamdev-client
Sep 20 22:03:38 localhost vdr: [1074] starting plugin: signal
Sep 20 22:03:38 localhost vdr: [1074] starting plugin: streamdev-server
Sep 20 22:03:38 localhost vdr: [1074] loading /var/lib/vdr/plugins/streamdev-server/streamdevhosts.conf
Sep 20 22:03:38 localhost vdr: [1074] starting plugin: dvbsddevice
Sep 20 22:03:38 localhost vdr: [1074] starting plugin: text2skin
Sep 20 22:03:38 localhost vdr: [1078] streamdev server thread started (pid=1074, tid=1078)
Sep 20 22:03:38 localhost vdr: [1078] Streamdev: Listening (VTP) on port 2004
Sep 20 22:03:38 localhost vdr: [1078] Streamdev: Listening (HTTP) on port 3000
Sep 20 22:03:38 localhost vdr: [1078] cTimeMs: using monotonic clock (resolution is 1 ns)
Sep 20 22:03:38 localhost vdr: [1076] video directory scanner thread ended (pid=1074, tid=1076)
Sep 20 22:03:38 localhost vdr: [1075] video directory scanner thread ended (pid=1074, tid=1075)
Sep 20 22:03:38 localhost vdr: [1074] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_FS/anthra_1280_FS.colors
Sep 20 22:03:38 localhost vdr: [1074] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_FS/anthra_1280_FS.skin
Sep 20 22:03:39 localhost vdr: [1074] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_FSt/anthra_1920_FSt.colors
Sep 20 22:03:39 localhost vdr: [1074] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_FSt/anthra_1920_FSt.skin
Sep 20 22:03:39 localhost vdr: [1074] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.colors
Sep 20 22:03:39 localhost vdr: [1074] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.skin
Sep 20 22:03:39 localhost vdr: [1074] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors
Sep 20 22:03:39 localhost vdr: [1074] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin
Sep 20 22:03:39 localhost vdr: [1074] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_SD/anthra_SD.colors
Sep 20 22:03:39 localhost vdr: [1074] parsing /var/lib/vdr/plugins/text2skin/anthra_SD/anthra_SD.skin
Sep 20 22:03:39 localhost vdr: [1074] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_OSt/anthra_1920_OSt.colors
Sep 20 22:03:39 localhost vdr: [1074] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_OSt/anthra_1920_OSt.skin
Sep 20 22:03:39 localhost vdr: [1074] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.colors
Sep 20 22:03:39 localhost vdr: [1074] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.skin
Sep 20 22:03:39 localhost vdr: [1074] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.colors
Sep 20 22:03:39 localhost vdr: [1074] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.skin
Sep 20 22:03:39 localhost vdr: [1074] starting plugin: xine
Sep 20 22:03:39 localhost vdr: [1074] stopping plugin: text2skin
Sep 20 22:03:39 localhost vdr: [1074] stopping plugin: dvbsddevice
Sep 20 22:03:39 localhost vdr: [1074] stopping plugin: streamdev-server
Sep 20 22:03:39 localhost vdr: [1078] streamdev server thread ended (pid=1074, tid=1078)
Sep 20 22:03:39 localhost vdr: [1074] stopping plugin: signal
Sep 20 22:03:39 localhost vdr: [1074] stopping plugin: streamdev-client
Sep 20 22:03:39 localhost vdr: [1077] Leaving cXineRemote thread
Sep 20 22:03:39 localhost vdr: [1077] XineRemote control thread ended (pid=1074, tid=1077)
Sep 20 22:03:39 localhost vdr: [1074] deleting plugin: xine
Sep 20 22:03:39 localhost vdr: [1074] deleting plugin: text2skin
Sep 20 22:03:39 localhost vdr: [1074] deleting plugin: dvbsddevice
Sep 20 22:03:39 localhost vdr: [1074] deleting plugin: streamdev-server
Sep 20 22:03:39 localhost vdr: [1074] deleting plugin: signal
Sep 20 22:03:39 localhost vdr: [1074] deleting plugin: streamdev-client
Sep 20 22:03:39 localhost vdr: [1074] max. latency time 0 seconds
Sep 20 22:03:39 localhost vdr: [1074] exiting, exit code 2
Sep 20 22:03:39 localhost runvdr: stopping after fatal fail (-------------------------
MakePrimaryDevice: 1
=========================
SetVideoFormat: 1
SetVolumeDevice: 255
bind failed.: Address family not supported by protocol)
Sep 20 22:03:48 localhost kernel: [ 31.413923] eth0: no IPv6 routers present
[temporär gelöst/hingefrickelt] ;-) [ARCH-VDR] vdr startet nicht
- Moorviper
- Geschlossen
-
-
Bekomme folgenden log
Btw. gibt ne maximal länge von logs die man per "code" posten kann ???
-
also das
ZitatSep 20 22:03:38 localhost vdr: [1074] no DVB device found
schaut mir irgendwie verdächtig aus! gibts denn ne "vdr-err" datei im tempverzeichnis??
-
Morgen,
CodeSep 20 22:03:39 localhost runvdr: stopping after fatal fail (------------------------- MakePrimaryDevice: 1
Der VDR hat also keine DVB Karte gefunden aber er kann theoretisch den streamdev clienten als EIngabedevice benutzen. Wenn "streamdev = device 1" ist könnte das der Grund sein. Ich gehe mal davon aus, dass du den VDR mit DVB Karte installiert hast. Überprüfe mal die DVB Treiber bzw. sag uns mal welche Karte du einsetzt.
Gruß
AtechPS: An wen muss man sich wenden, wenn man ein neues Unterforum aufmachen möchte? Ich denke es wird so langsam mal Zeit für ein Archvdr Unterforum.
-
Zitat
Ich denke es wird so langsam mal Zeit für ein Archvdr Unterforum.
das wär btw. wird wohl einer der mods machen!??
-
Danke schon mal für die antworten
Es ist keine DVB-Karte verbaut wollte/will den netceiver einbinden.
Hatte schon mal installiert und da bekam ich einen ähnlichen standHab deswegen den streamdev-server -> damit der vdr ein eingabe-gerät hat
das iptv-plugin lief beim 1.7.21er nicht durchhab das dvbsd-device plugin entfernt da es ja nicht benötigt wird
Code[archvdr@myhost tmp]$ sudo cat vdr-err.hFVVTv Password: ------------------------- MakePrimaryDevice: 1 ========================= SetVideoFormat: 1 SetVolumeDevice: 255 bind failed.: Address family not supported by protocol
gruß
daniel -
Hi,
das hat mich schon immer gestört, dass der VDR ohne ein gültiges EIngabeplugin nicht startet. Ich finde das gehört entkoppelt.
Es gibt auch noch das Dummydevice Plugin. Das ist genau für sowas gedacht. Selber habe ich es aber noch nie getestet. Ansnsten sieht es so aus als wolle der streamdev client sich verbinden und das schlägt fehl. Ich habe bisher nur den streamdev Server verwendet - gibt es evtl. eine config für den Klienten?
Gruß
Atech -
die xineconfig hab ich von hier übernommen
http://www.vdr-wiki.de/wiki/in…PI_-_xine_Plugin_-_configund die config da hin gepackt
/var/lib/vdr/.xine/config
oder welche config meinst du genau
das dummydevice war für die ausgabe
-
Ach mist, gabs da nicht auch was für die Eingabe? Naja damit musste ich mich nie Beschäftigen. Ich meine eine Konfigurationsdatei für den Streamdev Klienten., Das sieht doch schwe danach aus als würde sich das Plugin verbinden wollen:
bind failed.: Address family not supported by protocol
-
-
was mir ein bisschen sorgen macht ist das
Zitat
Sep 21 15:42:20 netvdr kernel: [ 4.732301] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Sep 21 15:42:20 netvdr kernel: [ 5.315596] EXT4-fs (sda3): re-mounted. Opts: (null)
Sep 21 15:42:20 netvdr kernel: [ 5.688634] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Sep 21 15:42:20 netvdr kernel: [ 5.804130] Adding 1028156k swap on /dev/sda2. Priority:-1 extents:1 across:1028156k
Sep 21 15:42:20 netvdr kernel: [ 7.077903] r8169 0000:01:00.0: eth0: link down
Sep 21 15:42:20 netvdr kernel: [ 7.077911] r8169 0000:01:00.0: eth0: link down
Sep 21 15:42:22 netvdr kernel: [ 8.339950] NET: Registered protocol family 10
Sep 21 15:42:22 netvdr kernel: [ 8.340445] ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 21 15:42:22 netvdr kernel: [ 8.878659] Linux media interface: v0.10
Sep 21 15:42:22 netvdr kernel: [ 8.884502] Linux video capture interface: v2.00
Sep 21 15:42:22 netvdr kernel: [ 8.909628] saa7146: register extension 'av7110'.
Sep 21 15:42:23 netvdr kernel: [ 9.885113] r8169 0000:01:00.0: eth0: link up
Sep 21 15:42:23 netvdr kernel: [ 9.885421] ADDRCONF(NETDEV_CHANGE): eth0: link becomes readyes ist keine karte drin
[Blockierte Grafik: http://vdrportal.magdlos.com/downloads/210920111057.jpg]
[Blockierte Grafik: http://vdrportal.magdlos.com/downloads/210920111059.jpg]
[Blockierte Grafik: http://vdrportal.magdlos.com/downloads/210920111060.jpg] -
Das log oben ist aber noch ohne das netceiver Plugin? Ich kann leider nicht an meinen VDR um mal zu schauen ob saa auch im log auftaucht...
-
ja wollte erst mal sehen ob der rechner so läuft weil ich ja sonst keine fehler bezüglich des netceiver plugins finden kann
hatte es aber auch schon mal übersetzt und geladen -> es war das gleiche
-
Das ist ja auch Sinnvoll. Sorry da bin ich erstmal am Ende mit meinem Latein. Hast du die Möglichkeit einen Server aufzusetzen der von einer DVB Karte Streamen kann? Es wäre wirklich schön zu Wissen welches Protokoll in welchem Zusammenhang gemeint ist
bind failed.: Address family not supported by protocol
-
nur mit xineliboutput (xine verursacht wohl den alten fehler) und mcli bekomm ich
Code
Alles anzeigenSep 21 19:52:37 netvdr kernel: [ 6.973183] r8169 0000:01:00.0: eth0: link down Sep 21 19:52:37 netvdr /usr/sbin/crond[859]: (CRON) STARTUP (1.4.8) Sep 21 19:52:37 netvdr /usr/sbin/crond[859]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory Sep 21 19:52:37 netvdr /usr/sbin/crond[859]: (CRON) INFO (running with inotify support) Sep 21 19:52:38 netvdr kernel: [ 7.760462] NET: Registered protocol family 10 Sep 21 19:52:38 netvdr kernel: [ 7.760879] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 21 19:52:39 netvdr kernel: [ 8.715196] Linux media interface: v0.10 Sep 21 19:52:39 netvdr kernel: [ 8.721054] Linux video capture interface: v2.00 Sep 21 19:52:39 netvdr kernel: [ 8.746263] saa7146: register extension 'av7110'. Sep 21 19:52:39 netvdr vdr: [1025] VDR version 1.7.21 started Sep 21 19:52:39 netvdr vdr: [1025] switched to user 'vdr' Sep 21 19:52:39 netvdr vdr: [1025] codeset is 'UTF-8' - known Sep 21 19:52:39 netvdr vdr: [1025] found 0 locales in /usr/share/locale Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'deu,ger' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'slv,slo' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'ita' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'dut,nla,nld' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'prt' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'fra,fre' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'nor' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'fin,suo' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'pol' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'esl,spa' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'ell,gre' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'sve,swe' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'rom,rum' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'hun' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'cat,cln' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'rus' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'srb,srp,scr,scc' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'hrv' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'est' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'dan' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'cze,ces' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'tur' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'ukr' Sep 21 19:52:39 netvdr vdr: [1025] no locale for language code 'ara' Sep 21 19:52:39 netvdr vdr: [1025] loading plugin: /usr/lib/vdr/plugins/libvdr-mcli.so.1.7.21 Sep 21 19:52:39 netvdr vdr: [1025] loading plugin: /usr/lib/vdr/plugins/libvdr-xineliboutput.so.1.7.21 Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/setup.conf Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ChannelBlocker = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ChannelBlockerList = Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ChannelBlockerMode = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: CustomMainMenuTitle = Video Disk Recorder Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: CutterAutoDelete = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: CutTime = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: CutTimePatchEnabled = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: DolbyTransferFix = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: DvdDisplayMode = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: DvdDisplayZeros = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: DvdSpeedLimit = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: DvdTrayMode = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ExtendBuffer = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: InRAM = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: KeepPaused = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: LiveBuffer = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: LiveBufferSize = 100 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: LRChannelGroups = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: LRForwardRewind = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: LRVolumeControl = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: MainMenuTitle = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: MemBufSize = 5 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: MenuCmdPosition = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: nVidPrefer = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: RecordDolbyDigital = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: RecordingsSortDirsFirst = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: RecordingsSortMode = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ShowProgressBar = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ShowRecDate = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ShowRecLength = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ShowRecTime = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ShowTimerStop = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: ShowValidInput = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: SoftOsdFadeinSteps = 6 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: SoftOsdFadeoutSteps = 16 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: SoftOsdPaletteOnly = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: SoftOsdRate = 50 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: SupportTeletext = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: UseDolbyInRecordings = 1 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: UseFriendlyFNames = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: UseSoftOsd = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: UseSyncEarlyPatch = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: UseVidPrefer = 0 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: VidPreferPrio0 = 50 Sep 21 19:52:39 netvdr vdr: [1025] ERROR: unknown config parameter: VidPreferSize0 = 800 Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/sources.conf Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/diseqc.conf Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/channels.conf Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/commands.conf Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/reccmds.conf Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/svdrphosts.conf Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/remote.conf Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/keymacros.conf Sep 21 19:52:39 netvdr vdr: [1025] reading EPG data from /var/cache/vdr/epg.data Sep 21 19:52:39 netvdr vdr: [1025] registered source parameters for 'A - ATSC' Sep 21 19:52:39 netvdr vdr: [1025] registered source parameters for 'C - DVB-C' Sep 21 19:52:39 netvdr vdr: [1025] registered source parameters for 'S - DVB-S' Sep 21 19:52:39 netvdr vdr: [1025] registered source parameters for 'T - DVB-T' Sep 21 19:52:39 netvdr vdr: [1025] no DVB device found Sep 21 19:52:39 netvdr vdr: [1025] initializing plugin: mcli (0.9.1): NetCeiver Client Application Sep 21 19:52:39 netvdr vdr: [1027] video directory scanner thread started (pid=1025, tid=1027) Sep 21 19:52:39 netvdr vdr: [1026] video directory scanner thread started (pid=1025, tid=1026) Sep 21 19:52:39 netvdr vdr: [1027] video directory scanner thread ended (pid=1025, tid=1027) Sep 21 19:52:39 netvdr vdr: [1026] video directory scanner thread ended (pid=1025, tid=1026) Sep 21 19:52:39 netvdr vdr: [1025] initializing plugin: xineliboutput (1.0.90-cvs): X11/xine-lib output plugin Sep 21 19:52:39 netvdr vdr: [1025] new device number 9 Sep 21 19:52:39 netvdr vdr: [1025] [xine..put] cTimePts: clock_gettime(CLOCK_MONOTONIC): clock resolution 0 us Sep 21 19:52:39 netvdr vdr: [1025] [xine..put] cTimePts: using monotonic clock Sep 21 19:52:39 netvdr vdr: [1025] [xine..put] RTP SSRC: 0x3c4aa6e9 Sep 21 19:52:39 netvdr vdr: [1025] setting primary device to 1 Sep 21 19:52:39 netvdr vdr: [1025] assuming manual start of VDR Sep 21 19:52:39 netvdr vdr: [1025] SVDRP listening on port 2001 Sep 21 19:52:39 netvdr vdr: [1029] [xine..put] Have CAP_SYS_NICE capability Sep 21 19:52:39 netvdr vdr: [1025] skin "spockele" not available - using "classic" instead Sep 21 19:52:39 netvdr vdr: [1025] loading /var/lib/vdr/themes/classic-default.theme Sep 21 19:52:39 netvdr vdr: [1025] starting plugin: mcli Sep 21 19:52:39 netvdr vdr: [1025] mcli v0.9.1 started Sep 21 19:52:39 netvdr vdr: [1025] starting plugin: xineliboutput Sep 21 19:52:39 netvdr vdr: [1031] Remote decoder/display server (cXinelibServer) thread started (pid=1025, tid=1031) Sep 21 19:52:39 netvdr vdr: [1031] [xine..put] Have CAP_SYS_NICE capability Sep 21 19:52:39 netvdr vdr: [1031] [xine..put] cXinelibServer priority set successful SCHED_RR 2 [1,99] Sep 21 19:52:39 netvdr vdr: [1031] [xine..put] Listening on port 37890 Sep 21 19:52:40 netvdr vdr: [1025] [xine..put] cXinelibDevice::StartDevice(): Device started Sep 21 19:52:40 netvdr vdr: [1025] skin "spockele" not available - using "classic" instead Sep 21 19:52:40 netvdr vdr: [1025] loading /var/lib/vdr/themes/classic-default.theme Sep 21 19:52:40 netvdr vdr: [1025] remote control LIRC - keys known Sep 21 19:52:40 netvdr vdr: [1025] switching to channel 1 Sep 21 19:52:40 netvdr vdr: [1025] info: Channel not available! Sep 21 19:52:40 netvdr vdr: [1032] LIRC remote control thread started (pid=1025, tid=1032) Sep 21 19:52:40 netvdr vdr: [1032] cTimeMs: using monotonic clock (resolution is 1 ns) Sep 21 19:52:40 netvdr kernel: [ 9.555515] r8169 0000:01:00.0: eth0: link up Sep 21 19:52:40 netvdr kernel: [ 9.555820] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sep 21 19:52:42 netvdr vdr: [1025] setting watchdog timer to 60 seconds Sep 21 19:52:42 netvdr vdr: [1025] switching to channel 1 Sep 21 19:52:42 netvdr vdr: [1025] info: Channel not available! Sep 21 19:52:44 netvdr vdr: [1025] OSD size changed to 1920x1080 @ 1 Sep 21 19:52:44 netvdr vdr: [1025] max. latency time 2 seconds Sep 21 19:52:44 netvdr vdr: [1025] connect from 127.0.0.1, port 42236 - accepted Sep 21 19:52:44 netvdr vdr: [1025] closing SVDRP connection Sep 21 19:52:50 netvdr kernel: [ 19.951580] eth0: no IPv6 routers present Sep 21 19:52:52 netvdr vdr: [1025] connect from 127.0.0.1, port 42242 - accepted Sep 21 19:52:52 netvdr vdr: [1025] closing SVDRP connection Sep 21 19:52:53 netvdr vdr: [1025] switching to channel 1 Sep 21 19:52:53 netvdr vdr: [1025] info: Channel not available! Sep 21 19:52:55 netvdr vdr: [1025] max. latency time 3 seconds Sep 21 19:52:58 netvdr vdr: [1025] connect from 127.0.0.1, port 42262 - accepted Sep 21 19:52:58 netvdr vdr: [1025] closing SVDRP connection Sep 21 19:53:04 netvdr vdr: [1025] switching to channel 1 Sep 21 19:53:04 netvdr vdr: [1025] info: Channel not available! Sep 21 19:53:04 netvdr vdr: [1025] connect from 127.0.0.1, port 42268 - accepted Sep 21 19:53:04 netvdr vdr: [1025] closing SVDRP connection Sep 21 19:53:10 netvdr vdr: [1025] connect from 127.0.0.1, port 42288 - accepted Sep 21 19:53:10 netvdr vdr: [1025] closing SVDRP connection Sep 21 19:53:15 netvdr vdr: [1025] switching to channel 1 Sep 21 19:53:15 netvdr vdr: [1025] info: Channel not available! Sep 21 19:53:16 netvdr vdr: [1025] connect from 127.0.0.1, port 42294 - accepted Sep 21 19:53:16 netvdr vdr: [1025] closing SVDRP connection Sep 21 19:53:22 netvdr vdr: [1025] connect from 127.0.0.1, port 42314 - accepted Sep 21 19:53:22 netvdr vdr: [1025] closing SVDRP connection Sep 21 19:53:26 netvdr vdr: [1025] switching to channel 1 Sep 21 19:53:26 netvdr vdr: [1025] info: Channel not available! Sep 21 19:53:28 netvdr vdr: [1025] connect from 127.0.0.1, port 42320 - accepted Sep 21 19:53:28 netvdr vdr: [1025] closing SVDRP connection Sep 21 19:53:34 netvdr vdr: [1025] connect from 127.0.0.1, port 42340 - accepted Sep 21 19:53:34 netvdr vdr: [1025] closing SVDRP connection
Code[root@netvdr ~]# cat /tmp/vdr-err.46NQIC Cannot find any usable network interface Cannot get a packet socket setsockopt(IPV6_ADD_MEMBERSHIP): No such device Cannot join multicast group ! socket error ! [root@netvdr ~]#
ich denke mal ganz allgemein ist das netzwerk zu spät da
der vdr startet jetzt mit vdr-sxfe ohne vaapi
:edit oder es liegt am multicast
CodeCannot find any usable network interface Cannot get a packet socket setsockopt(IPV6_ADD_MEMBERSHIP): No such device Cannot join multicast group ! socket error !
https://svn.baycom.de/repos/vd…ast/client/mld_reporter.c
Code
Alles anzeigenint mld_client_init (char *intf) { if(intf) { strcpy(iface, intf); } else { iface[0]=0; } if (!strlen (iface)) { struct intnode *intn = int_find_first (); if (intn) { strcpy (iface, intn->name); } else { warn ("Cannot find any usable network interface\n"); return -1; } } #if ! (defined WIN32 || defined APPLE) g_conf->rawsocket = socket (PF_PACKET, SOCK_DGRAM, htons (ETH_P_ALL)); #endif #ifdef WIN32 g_conf->rawsocket = socket (PF_INET6, SOCK_RAW, IPPROTO_ICMPV6); #endif #ifdef APPLE g_conf->rawsocket = socket (PF_INET6, SOCK_RAW, IPPROTO_HOPOPTS); #endif if (g_conf->rawsocket < 0) { warn ("Cannot get a packet socket\n"); return -1; } #ifdef WIN32 #define IPV6_HDRINCL 2 DWORD n=1; if (setsockopt (g_conf->rawsocket, IPPROTO_IPV6, IPV6_HDRINCL, (char *)&n, sizeof (n)) < 0) { err ("setsockopt IPV6_HDRINCL"); } int idx; if ((idx = if_nametoindex (iface))>0) { int ret=setsockopt (g_conf->rawsocket, IPPROTO_IPV6, IPV6_MULTICAST_IF, (_SOTYPE)&idx, sizeof (idx)); if(ret<0) { warn("setsockopt for IPV6_MULTICAST_IF failed with %d error %s (%d)\n",ret,strerror (errno), errno); } } #endif pthread_create (&mld_send_reports_thread, NULL, mld_send_reports, &receivers); return 0; } //----------------------------------------------------------------------
-
so Rückmeldung
hab es hinbekommen mit dem mcli
das wird ein gefrickel mit dem PKGBUILD -
Code
[archvdr@myhost tmp]$ sudo cat vdr-err.hFVVTv Password: ------------------------- MakePrimaryDevice: 1 ========================= SetVideoFormat: 1 SetVolumeDevice: 255 bind failed.: Address family not supported by protocol
als Ursache dieses Fehlers konnte ich das xine plugin ausloten
muss nur noch herrausfinden wo der fehler ist
-
hab aufgegeben
der fehler scheint nicht vom xine-plugin zu kommen.
es müsste aber der auslöser sein da der vdr mit xineliboutput ohne probleme läuft -
Hallo,
habe den selben Fehler auch bei meiner Installation. Der VDR stürzt beim starten ab, habe ebenfalls das xine-plugin im Verdacht. Gibt es eine Möglichkeit diesen Fehler zu beheben?
-
Ich habs erst mal aufgegeben da ich zur zeit zu wenig zeit zur fehlersuche habe
32Watt bei 1080i waren halt schon sehr geil und konnte auch so manchen film endlich ruckelfrei sehen den vdpau,vda nicht schafftenhatte im zumindest in der xineLib.c den quellcode erweitert damit eine andere fehlermeldung ausgegeben wird
diese änderte sich aber nichtps xineliboutput geht ja / halt nicht über die /etc/default/frontend irgendwas
hatte mir nen manuellen aufruf in die /etc/rc.local geschrieben
xineliboutput finde ich halt nicht so toll (das osd sah schei** aus, und naja find das xine plugin besser basta)
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!