Mahlzeit 3.2 und PVR350

  • Hallo!


    Ich brauche etwas hilfe, bitte:


    Was muss ich noch alles tun um eine Hauppauge PVR350 mit dem aktuellen Mahlzeit ISO 3.2 zum laufen zu bringen?


    Hardware is ein ASUS Board mit PIII 1000 MHz und 256MB RAM


    hier noch mein aktuelles LOG:


    Dec 12 10:07:55 linvdr user.warn kernel: saa7146: register extension 'budget_av'.
    Dec 12 10:07:55 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    Dec 12 10:07:55 linvdr user.warn kernel: lirc_dev: IR Remote Control driver registered, at major 61
    Dec 12 10:07:55 linvdr user.warn kernel: lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
    Dec 12 10:07:56 linvdr user.info kernel: lirc_serial: auto-detected active low receiver
    Dec 12 10:07:56 linvdr user.warn kernel: lirc_dev: lirc_register_plugin: sample_rate: 0
    Dec 12 10:07:57 linvdr user.info vdr: [1357] VDR version 1.4.4-2-Toxic-Ed. started
    Dec 12 10:07:57 linvdr user.info vdr: [1357] Bigpatch 17.09.2006 is active!
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading plugin: /usr/lib/vdr/plugins/libvdr-osdout.so.1.4.5
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading plugin: /usr/lib/vdr/plugins/libvdr-osdserver.so.1.4.5
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading plugin: /usr/lib/vdr/plugins/libvdr-pvr350.so.1.4.5
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/setup.conf
    Dec 12 10:07:57 linvdr user.err vdr: [1357] ERROR: unknown config parameter: RecordDolbyDigital = 1
    Dec 12 10:07:57 linvdr user.err vdr: [1357] ERROR: unknown config parameter: ShowProgressBar = 0
    Dec 12 10:07:57 linvdr user.err vdr: [1357] ERROR: unknown config parameter: SortTimers = 1
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/sources.conf
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/diseqc.conf
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/channels.conf
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/commands.conf
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/reccmds.conf
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/svdrphosts.conf
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/remote.conf
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/keymacros.conf
    Dec 12 10:07:57 linvdr user.debug vdr: [1372] video directory scanner thread started (pid=1372, tid=1372)
    Dec 12 10:07:57 linvdr user.debug vdr: [1373] video directory scanner thread started (pid=1373, tid=1373)
    Dec 12 10:07:57 linvdr user.debug vdr: [1357] reading EPG data from /video0/epg.data
    Dec 12 10:07:57 linvdr user.debug vdr: [1357] probing /dev/dvb/adapter0/frontend0
    Dec 12 10:07:57 linvdr user.info vdr: [1357] no DVB device found
    Dec 12 10:07:57 linvdr user.info vdr: [1357] initializing plugin: osdout (0.0.1): Osd Output over FB
    Dec 12 10:07:57 linvdr user.info vdr: [1357] initializing plugin: osdserver (0.0.1): Server for remote OSD clients
    Dec 12 10:07:57 linvdr user.info vdr: [1357] initializing plugin: pvr350 (0.0.6-pre1-dr.seltsam): An output device for the PVR350
    Dec 12 10:07:57 linvdr user.debug vdr: [1372] video directory scanner thread ended (pid=1372, tid=1372)
    Dec 12 10:07:57 linvdr user.debug vdr: [1373] video directory scanner thread ended (pid=1373, tid=1373)
    Dec 12 10:07:57 linvdr user.info vdr: [1357] setting primary device to 1
    Dec 12 10:07:57 linvdr user.info vdr: [1357] SVDRP listening on port 2001
    Dec 12 10:07:57 linvdr user.info vdr: [1357] setting current skin to "classic"
    Dec 12 10:07:57 linvdr user.info vdr: [1357] loading /etc/vdr/themes/classic-default.theme
    Dec 12 10:07:57 linvdr user.info vdr: [1357] starting plugin: osdout
    Dec 12 10:07:57 linvdr user.info vdr: [1357] starting plugin: osdserver
    Dec 12 10:07:57 linvdr user.info vdr: [1357] starting plugin: pvr350
    Dec 12 10:07:57 linvdr user.debug vdr: [1357] remote control LIRC - keys known
    Dec 12 10:07:57 linvdr user.debug vdr: [1357] remote control KBD - keys known
    Dec 12 10:07:57 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:07:57 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:07:57 linvdr user.err kernel: IRQ handler type mismatch for IRQ 4
    Dec 12 10:07:57 linvdr user.warn kernel: setup_irq+0x198/0x1a4
    Dec 12 10:07:57 linvdr user.warn kernel: irq_handler+0x0/0x48e [lirc_serial]
    Dec 12 10:07:57 linvdr user.warn kernel: request_irq+0x79/0x96
    Dec 12 10:07:57 linvdr user.warn kernel: set_use_inc+0xa7/0x1ba [lirc_serial]
    Dec 12 10:07:57 linvdr user.warn kernel: irq_handler+0x0/0x48e [lirc_serial]
    Dec 12 10:07:57 linvdr user.warn kernel: irctl_open+0x168/0x218 [lirc_dev]
    Dec 12 10:07:57 linvdr user.warn kernel: chrdev_open+0x163/0x17f
    Dec 12 10:07:57 linvdr user.warn kernel: chrdev_open+0x0/0x17f
    Dec 12 10:07:57 linvdr user.warn kernel: __dentry_open+0xe2/0x1dd
    Dec 12 10:07:57 linvdr user.warn kernel: do_filp_open+0x2e/0x36
    Dec 12 10:07:57 linvdr user.warn kernel: get_unused_fd+0x4a/0xb8
    Dec 12 10:07:57 linvdr user.warn kernel: do_sys_open+0x3d/0xb5
    Dec 12 10:07:57 linvdr user.warn kernel: sys_open+0x13/0x17
    Dec 12 10:07:57 linvdr user.warn kernel: syscall_call+0x7/0xb
    Dec 12 10:07:57 linvdr user.err kernel: lirc_serial: IRQ 4 busy
    Dec 12 10:07:57 linvdr user.debug vdr: [1376] osdserver thread started (pid=1376, tid=1376)
    Dec 12 10:07:57 linvdr user.debug vdr: [1377] LIRC remote control thread started (pid=1377, tid=1377)
    Dec 12 10:07:57 linvdr user.err vdr: [1377] ERROR: lircd connection broken, trying to reconnect every 3.0 seconds
    Dec 12 10:07:57 linvdr user.debug vdr: [1378] KBD remote control thread started (pid=1378, tid=1378)
    Dec 12 10:07:59 linvdr user.debug vdr: [1357] setting watchdog timer to 900 seconds
    Dec 12 10:07:59 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:07:59 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:08:00 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:02 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:08:03 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:05 linvdr user.debug vdr: [1357] max. latency time 6 seconds
    Dec 12 10:08:06 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:09 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:10 linvdr user.debug vdr: [1357] assuming manual start of VDR
    Dec 12 10:08:12 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:15 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:16 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:08:16 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:08:18 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:18 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:08:21 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:21 linvdr user.debug vdr: [1357] max. latency time 7 seconds
    Dec 12 10:08:24 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:26 linvdr cron.notice crond[1390]: crond 2.3.2 dillon, started, log level 8
    Dec 12 10:08:27 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:30 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:32 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:08:32 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:08:33 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:35 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:08:36 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:39 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:42 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:45 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:47 linvdr user.info vdr: [1357] connect from 127.0.0.1, port 2496 - accepted
    Dec 12 10:08:48 linvdr user.info vdr: [1357] closing SVDRP connection
    Dec 12 10:08:48 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:49 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:08:49 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:08:51 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:52 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:08:54 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:08:57 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:00 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:03 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:06 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:09:06 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:09:06 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:09 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:09:09 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:12 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:15 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:18 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:21 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:22 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:09:22 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:09:24 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:09:25 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:28 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:31 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:34 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:37 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:38 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:09:38 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:09:40 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:41 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:09:43 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:46 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:49 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:52 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:55 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:09:55 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:09:55 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:09:58 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:09:59 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:01 linvdr cron.notice crond[1390]: USER root pid 1476 cmd convert.pl -q -s
    Dec 12 10:10:02 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:05 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:08 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:11 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:11 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:10:11 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:10:14 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:10:14 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:17 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:20 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:23 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:26 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:28 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:10:28 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:10:29 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:31 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:10:32 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:35 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:38 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:41 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:44 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:44 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:10:44 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:10:47 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:10:48 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:51 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:54 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:10:57 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:00 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:01 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:11:01 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:11:03 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:04 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:11:06 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:09 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:09 linvdr user.info vdr: [1357] connect from 127.0.0.1, port 2497 - accepted
    Dec 12 10:11:09 linvdr user.info vdr: [1357] closing SVDRP connection
    Dec 12 10:11:10 linvdr user.info vdr: [1357] connect from 127.0.0.1, port 2498 - accepted
    Dec 12 10:11:10 linvdr user.info vdr: [1357] closing SVDRP connection
    Dec 12 10:11:11 linvdr user.info vdr: [1357] connect from 127.0.0.1, port 2499 - accepted
    Dec 12 10:11:11 linvdr user.info vdr: [1357] closing SVDRP connection
    Dec 12 10:11:12 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:15 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:18 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:18 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:11:18 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:11:21 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:11:22 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:25 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:28 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:31 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:34 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:34 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:11:34 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:11:37 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:11:37 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:40 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:43 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:46 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:49 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:51 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:11:51 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:11:52 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:54 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:11:55 linvdr auth.info sshd[1494]: Could not reverse map address 192.168.10.12.
    Dec 12 10:11:55 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:11:57 linvdr auth.info sshd[1494]: Accepted password for root from 192.168.10.12 port 2684 ssh2
    Dec 12 10:11:57 linvdr auth.info sshd[1494]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
    Dec 12 10:11:57 linvdr auth.info PAM_unix[1494]: (ssh) session opened for user root by (uid=0)
    Dec 12 10:11:57 linvdr auth.err PAM-env[1494]: Unable to open config file: No such file or directory
    Dec 12 10:11:57 linvdr auth.err PAM-env[1495]: Unable to open config file: No such file or directory
    Dec 12 10:11:58 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:01 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:04 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:07 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:12:07 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:12:07 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:09 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:12:10 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:13 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:16 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:19 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:22 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:23 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:12:23 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:12:25 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:26 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:12:28 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:31 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:34 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:37 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:40 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:12:40 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:12:41 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:43 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:12:44 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:47 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:50 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:53 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:56 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:12:56 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:12:56 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    Dec 12 10:12:59 linvdr user.err vdr: [1357] ERROR: Kanal nicht verfügbar!
    Dec 12 10:12:59 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:13:02 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:13:05 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:13:08 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:13:11 linvdr user.err vdr: [1377] ERROR: /dev/lircd: Connection refused
    Dec 12 10:13:13 linvdr user.info vdr: [1357] switching to channel 1
    Dec 12 10:13:13 linvdr user.info vdr: [1357] info: Kanal nicht verfügbar!
    linvdr:~#

  • ivtv und ivtv_fb müssen geladen werden, entweder mit modprobe in der rcStart oder im Abschnitt MODULES der runvdr


    pvrinput-Plugin aktivieren


    passende channels.conf anlegen (ggf. über w_pvrscan)

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

  • Vielen Dank!


    Funktioniert aber leider noch nicht so ganz...


    habe mal einen Scan mit w_pvrscan durchgeführt und es wurden auch Kanäle gefunden, aber leider wurden diese nicht in der channels.conf gespecihert. Muss ich noch einen Parameter verwenden???


    Ausserdem sehe ich im Log immer "no DVB device found" ist das normal bei einer analogen Karte??



    Grüße


    drichie

  • Zitat

    Original von drichie
    Hallo!


    Ich brauche etwas hilfe, bitte:


    Was muss ich noch alles tun um eine Hauppauge PVR350 mit dem aktuellen Mahlzeit ISO 3.2 zum laufen zu bringen?


    Servus,


    als erstes mal den LinVDRUpdater installieren (Mahlzeit-3.2 Thread 1. Post) und ausführen, dann gibts ein Update für die PVR350 Module und Plugins (und ein paar weitere Fixes).


    cu
    Markus

  • Zitat

    Original von drichie
    VAusserdem sehe ich im Log immer "no DVB device found" ist das normal bei einer analogen Karte??


    Eine analoge Karte ist keine dvb Karte, deswegen: ja.

  • OK!


    Hab ich auch gemacht aber irgendwie funktoniert das nich so ganz. Es kommt immer Kanal nicht verfügbar. Es werden auch die gefunden Channels nicht gespeichert.


    Hier noch mal ein aktuelles LOG:


    login as: root
    root@192.168.2.150's password:
    linvdr:~# logread
    Dec 12 17:30:26 linvdr syslog.info syslogd started: BusyBox v1.00 (2004.11.01-04 :47+0000)
    Dec 12 17:30:27 linvdr user.info kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
    Dec 12 17:30:27 linvdr user.info kernel: e100: Copyright(c) 1999-2005 Intel Corp oration
    Dec 12 17:30:27 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
    Dec 12 17:30:27 linvdr user.info kernel: GSI 9 (level, low) -> IRQ 9
    Dec 12 17:30:27 linvdr user.info kernel: e100: eth0: e100_probe: addr 0xeb000000 , irq 9, MAC addr 00:02:B3:CB:12:76
    Dec 12 17:30:27 linvdr user.info kernel: e100: eth0: e100_watchdog: link up, 100 Mbps, full-duplex
    Dec 12 17:30:27 linvdr auth.info sshd[1248]: Server listening on 0.0.0.0 port 22 .
    Dec 12 17:30:27 linvdr user.info kernel: Linux video capture interface: v2.00
    Dec 12 17:30:28 linvdr user.info kernel: ivtv: ==================== START INIT IVTV ====================
    Dec 12 17:30:28 linvdr user.info kernel: ivtv: version 0.8.1 (v4l-dvb + ivtv vi rtual merge) Revision: 3596 loading
    Dec 12 17:30:28 linvdr user.info kernel: ivtv: Linux version: 2.6.18 preempt mo d_unload 386 gcc-4.0
    Dec 12 17:30:28 linvdr user.info kernel: ivtv: In case of problems please inclu de the debug info between
    Dec 12 17:30:28 linvdr user.info kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with
    Dec 12 17:30:28 linvdr user.info kernel: ivtv: any module options, when mailing the ivtv-users mailinglist.
    Dec 12 17:30:28 linvdr user.info kernel: ivtv0: Autodetected Hauppauge card (cx2 3415 based)
    Dec 12 17:30:28 linvdr user.warn kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
    Dec 12 17:30:28 linvdr user.debug kernel: PCI: setting IRQ 5 as level-triggered
    Dec 12 17:30:28 linvdr user.info kernel: ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
    Dec 12 17:30:28 linvdr user.info kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
    Dec 12 17:30:28 linvdr daemon.info init: ^MStarting pid 1269, console /dev/tty1: '/sbin/getty'
    Dec 12 17:30:28 linvdr daemon.info init: ^MStarting pid 1270, console /dev/tty2: '/sbin/getty'
    Dec 12 17:30:28 linvdr daemon.info init: ^MStarting pid 1271, console /dev/tty3: '/sbin/getty'
    Dec 12 17:30:28 linvdr daemon.info init: ^MStarting pid 1272, console /dev/tty4: '/sbin/getty'
    Dec 12 17:30:28 linvdr user.info kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmwa re (262144 bytes)
    Dec 12 17:30:28 linvdr user.info kernel: ivtv0: loaded v4l-cx2341x-dec.fw firmwa re (262144 bytes)
    Dec 12 17:30:29 linvdr user.info kernel: tveeprom 0-0050: Hauppauge model 48139, rev K257, serial# 8260538
    Dec 12 17:30:29 linvdr user.info kernel: tveeprom 0-0050: tuner model is Philips FM1216 ME MK3 (idx 57, type 38)
    Dec 12 17:30:29 linvdr user.info kernel: tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
    Dec 12 17:30:29 linvdr user.info kernel: tveeprom 0-0050: audio processor is MSP 4418 (idx 25)
    Dec 12 17:30:29 linvdr user.info kernel: tveeprom 0-0050: decoder processor is S AA7115 (idx 19)
    Dec 12 17:30:29 linvdr user.info kernel: tveeprom 0-0050: has radio, has IR rece iver, has no IR transmitter
    Dec 12 17:30:29 linvdr user.info kernel: ivtv0: Autodetected Hauppauge WinTV PVR -350
    Dec 12 17:30:29 linvdr user.info kernel: tuner 0-0043: chip found @ 0x86 (ivtv i 2c driver #0)
    Dec 12 17:30:29 linvdr user.info kernel: tda9887 0-0043: tda988[5/6/7] found @ 0 x43 (tuner)
    Dec 12 17:30:29 linvdr user.info kernel: tuner 0-0061: chip found @ 0xc2 (ivtv i 2c driver #0)
    Dec 12 17:30:29 linvdr user.info kernel: saa7115 0-0021: saa7115 found (1f7115d0 e100000) @ 0x42 (ivtv i2c driver #0)
    Dec 12 17:30:29 linvdr user.info kernel: saa7127 0-0044: saa7129 found @ 0x88 (i vtv i2c driver #0)
    Dec 12 17:30:29 linvdr user.info kernel: msp3400 0-0040: MSP4418G-B3 found @ 0x8 0 (ivtv i2c driver #0)
    Dec 12 17:30:29 linvdr user.info kernel:
    Dec 12 17:30:37 linvdr user.info kernel: ivtv0 warning: 1000 ms time out waiting for firmware
    Dec 12 17:30:37 linvdr user.info kernel: ivtv0 warning: Failed api call 0x000000 00 with result 0xfffffff0
    Dec 12 17:30:37 linvdr user.info kernel: ivtv0 warning: Decoder firmware dead!
    Dec 12 17:30:37 linvdr user.err kernel: ivtv0: Error initializing firmware
    Dec 12 17:30:37 linvdr user.err kernel: ivtv0: Error -19 on initialization
    Dec 12 17:30:37 linvdr user.info kernel: ivtv: ==================== END INIT I VTV ====================
    Dec 12 17:30:37 linvdr user.err kernel: ivtv-osd: ivtv_fb_card_id parameter is out of range (valid range: 0--1)
    Dec 12 17:30:37 linvdr user.warn kernel: saa7146: register extension 'dvb'.
    Dec 12 17:30:38 linvdr user.warn kernel: saa7146: register extension 'budget dvb '.
    Dec 12 17:30:38 linvdr user.warn kernel: saa7146: register extension 'budget_ci dvb'.
    Dec 12 17:30:38 linvdr user.warn kernel: saa7146: register extension 'budget_av' .
    Dec 12 17:30:38 linvdr user.info kernel: b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
    Dec 12 17:30:38 linvdr user.info vdr: [1402] VDR version 1.4.4-2-Toxic-Ed. start ed
    Dec 12 17:30:38 linvdr user.info vdr: [1402] Bigpatch 17.09.2006 is active!
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading plugin: /usr/lib/vdr/plugin s/libvdr-osdout.so.1.4.5
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading plugin: /usr/lib/vdr/plugin s/libvdr-osdserver.so.1.4.5
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading plugin: /usr/lib/vdr/plugin s/libvdr-pvrinput.so.1.4.5
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading plugin: /usr/lib/vdr/plugin s/libvdr-remote.so.1.4.5
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/setup.conf
    Dec 12 17:30:38 linvdr user.err vdr: [1402] ERROR: unknown config parameter: Rec ordDolbyDigital = 1
    Dec 12 17:30:38 linvdr user.err vdr: [1402] ERROR: unknown config parameter: Sho wProgressBar = 0
    Dec 12 17:30:38 linvdr user.err vdr: [1402] ERROR: unknown config parameter: Sor tTimers = 1
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/sources.conf
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/diseqc.conf
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/channels.conf
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/commands.conf
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/reccmds.conf
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/svdrphosts.conf
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/remote.conf
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/keymacros.conf
    Dec 12 17:30:38 linvdr user.debug vdr: [1417] video directory scanner thread sta rted (pid=1417, tid=1417)
    Dec 12 17:30:38 linvdr user.debug vdr: [1418] video directory scanner thread sta rted (pid=1418, tid=1418)
    Dec 12 17:30:38 linvdr user.debug vdr: [1402] reading EPG data from /video0/epg. data
    Dec 12 17:30:38 linvdr user.debug vdr: [1402] probing /dev/dvb/adapter0/frontend 0
    Dec 12 17:30:38 linvdr user.info vdr: [1402] no DVB device found
    Dec 12 17:30:38 linvdr user.info vdr: [1402] initializing plugin: osdout (0.0.1) : Osd Output over FB
    Dec 12 17:30:38 linvdr user.info vdr: [1402] initializing plugin: osdserver (0.0 .1): Server for remote OSD clients
    Dec 12 17:30:38 linvdr user.info vdr: [1402] initializing plugin: pvrinput (0.1. 1): use Hauppauge PVR as input device
    Dec 12 17:30:38 linvdr user.info vdr: [1402] initializing plugin: remote (0.3.9) : Remote control
    Dec 12 17:30:38 linvdr user.info vdr: [1402] setting primary device to 1
    Dec 12 17:30:38 linvdr user.info vdr: [1402] SVDRP listening on port 2001
    Dec 12 17:30:38 linvdr user.debug vdr: [1417] video directory scanner thread end ed (pid=1417, tid=1417)
    Dec 12 17:30:38 linvdr user.debug vdr: [1418] video directory scanner thread end ed (pid=1418, tid=1418)
    Dec 12 17:30:38 linvdr user.info vdr: [1402] setting current skin to "classic"
    Dec 12 17:30:38 linvdr user.info vdr: [1402] loading /etc/vdr/themes/classic-def ault.theme
    Dec 12 17:30:38 linvdr user.info vdr: [1402] starting plugin: osdout
    Dec 12 17:30:38 linvdr user.info vdr: [1402] starting plugin: osdserver
    Dec 12 17:30:38 linvdr user.info vdr: [1402] starting plugin: pvrinput
    Dec 12 17:30:38 linvdr user.info vdr: [1402] starting plugin: remote
    Dec 12 17:30:38 linvdr user.debug vdr: [1419] osdserver thread started (pid=1419 , tid=1419)
    Dec 12 17:30:38 linvdr user.debug vdr: [1402] device /dev/input/event0: AT Trans lated Set 2 keyboard
    Dec 12 17:30:38 linvdr user.debug vdr: [1402] device /dev/input/event1: ImPS/2 L ogitech Wheel Mouse
    Dec 12 17:30:38 linvdr user.debug vdr: [1402] remote: using '/dev/input/event0'
    Dec 12 17:30:38 linvdr user.debug vdr: [1402] remote-event0: autorepeat supporte d
    Dec 12 17:30:38 linvdr user.debug vdr: [1402] remote-event0: exclusive access gr anted
    Dec 12 17:30:38 linvdr user.err vdr: [1402] ERROR: /dev/lircd: Connection refuse d
    Dec 12 17:30:38 linvdr user.debug vdr: [1402] remote control remote-event0 - key s known
    Dec 12 17:30:38 linvdr user.err vdr: [1402] ERROR: remote control LIRC not ready !
    Dec 12 17:30:38 linvdr user.info vdr: [1402] switching to channel 1
    Dec 12 17:30:38 linvdr user.info vdr: [1402] info: Kanal nicht verfügbar!
    Dec 12 17:30:41 linvdr user.debug vdr: [1402] setting watchdog timer to 900 seco nds
    Dec 12 17:30:41 linvdr user.info vdr: [1402] switching to channel 1
    Dec 12 17:30:41 linvdr user.info vdr: [1402] info: Kanal nicht verfügbar!
    Dec 12 17:30:44 linvdr user.err vdr: [1402] ERROR: Kanal nicht verfügbar!
    Dec 12 17:30:47 linvdr user.debug vdr: [1402] max. latency time 6 seconds
    Dec 12 17:30:53 linvdr user.debug vdr: [1402] assuming manual start of VDR
    Dec 12 17:30:58 linvdr user.info vdr: [1402] switching to channel 1
    Dec 12 17:30:58 linvdr user.info vdr: [1402] info: Kanal nicht verfügbar!
    Dec 12 17:30:59 linvdr cron.notice crond[1432]: crond 2.3.2 dillon, started, log level 8
    Dec 12 17:31:00 linvdr user.err vdr: [1402] ERROR: Kanal nicht verfügbar!
    Dec 12 17:31:02 linvdr user.info vdr: [1402] connect from 127.0.0.1, port 2141 - accepted
    Dec 12 17:31:03 linvdr user.info vdr: [1402] closing SVDRP connection
    Dec 12 17:31:11 linvdr user.info vdr: [1402] connect from 127.0.0.1, port 2142 - accepted
    Dec 12 17:31:11 linvdr user.info vdr: [1402] closing SVDRP connection
    Dec 12 17:31:12 linvdr user.info vdr: [1402] connect from 127.0.0.1, port 2143 - accepted
    Dec 12 17:31:12 linvdr user.info vdr: [1402] closing SVDRP connection
    Dec 12 17:31:13 linvdr user.info vdr: [1402] connect from 127.0.0.1, port 2144 - accepted
    Dec 12 17:31:13 linvdr user.info vdr: [1402] closing SVDRP connection
    Dec 12 17:31:14 linvdr user.info vdr: [1402] switching to channel 1
    Dec 12 17:31:14 linvdr user.info vdr: [1402] info: Kanal nicht verfügbar!
    Dec 12 17:31:17 linvdr user.err vdr: [1402] ERROR: Kanal nicht verfügbar!
    Dec 12 17:31:20 linvdr user.debug vdr: [1402] max. latency time 7 seconds
    Dec 12 17:31:31 linvdr user.info vdr: [1402] switching to channel 1
    Dec 12 17:31:31 linvdr user.info vdr: [1402] info: Kanal nicht verfügbar!
    Dec 12 17:31:34 linvdr user.err vdr: [1402] ERROR: Kanal nicht verfügbar!
    Dec 12 17:31:47 linvdr user.info vdr: [1402] switching to channel 1
    Dec 12 17:31:47 linvdr user.info vdr: [1402] info: Kanal nicht verfügbar!
    Dec 12 17:31:49 linvdr user.err vdr: [1402] ERROR: Kanal nicht verfügbar!
    Dec 12 17:32:01 linvdr auth.info sshd[1523]: Could not reverse map address 192.1 68.10.12.
    Dec 12 17:32:03 linvdr user.info vdr: [1402] switching to channel 1
    Dec 12 17:32:03 linvdr user.info vdr: [1402] info: Kanal nicht verfügbar!
    Dec 12 17:32:06 linvdr user.err vdr: [1402] ERROR: Kanal nicht verfügbar!
    Dec 12 17:32:09 linvdr auth.info sshd[1523]: Accepted password for root from 192 .168.10.12 port 3280 ssh2
    Dec 12 17:32:09 linvdr auth.info sshd[1523]: lastlog_get_entry: Error reading fr om /var/log/lastlog: Bad file descriptor
    Dec 12 17:32:09 linvdr auth.info PAM_unix[1523]: (ssh) session opened for user r oot by (uid=0)
    Dec 12 17:32:09 linvdr auth.err PAM-env[1523]: Unable to open config file: No su ch file or directory
    Dec 12 17:32:09 linvdr auth.err PAM-env[1533]: Unable to open config file: No su ch file or directory
    linvdr:~#

  • Zitat

    Original von drichie
    Es kommt immer Kanal nicht verfügbar. Es werden auch die gefunden Channels nicht gespeichert.


    Was haste denn gemacht?

  • Mich würden folgende Zeilen stören:

    Code
    Dec 12 17:30:37 linvdr user.info kernel: ivtv0 warning: 1000 ms time out waiting for firmware
    Dec 12 17:30:37 linvdr user.info kernel: ivtv0 warning: Failed api call 0x000000 00 with result 0xfffffff0
    Dec 12 17:30:37 linvdr user.info kernel: ivtv0 warning: Decoder firmware dead!
    Dec 12 17:30:37 linvdr user.err kernel: ivtv0: Error initializing firmware
    Dec 12 17:30:37 linvdr user.err kernel: ivtv0: Error -19 on initialization


    Welche Firmware wird gebraucht und wo sollte die liegen? Evtl. fehlt die im ISO... Ich habe keine PVR350 und kann daher auch nicht testen... :/


    cu
    Markus

  • Hm, und wo krieg ich die Firmware her?


    Aber wenn ich es richtig sehe, lädt er doch eine Firmware:



    und so wie ich es bei google eben fand, sollte das auch die richtige für die PVR350 sein... !?

  • Zitat

    Original von drichie
    Hm, und wo krieg ich die Firmware her?


    Das war ja meine Frage ;) Ich weiß es auch nicht, ich bin wie geschrieben kein PVR350 Nutzer...
    Aber das Wiki ist ein guter Anfang, irgendwann landet man mal auf den ivtv-Seiten, dort ist ein Link zur Firmware: http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz


    Ich muss mir das tar zu Hause mal angucken... Evtl. gibts dann heute Abend schon nen Fix (oder auch nicht falls die Firmware schon dabei wäre)


    cu
    Markus

  • Zitat

    Original von drichie
    na den linvdrupdater installiert wie beschrieben und das script ausgeführt. Oder muss ich da noch was machen?


    Falls du w_pvrscan meinst, das ist kein script, sondern ein binary. Und das *wie* des Ausführens interessiert mich.

  • die Firmware ist Teil meines Kernelpaketes und somit bestimmt im iso drin.


    diese fw-timeouts treten bisweilen auf, einfach mal runterfahren, 10sek vom Strom trennen und neu booten!

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

  • wirbel
    ich meinte das linvdrupdater script nicht w_pvrscan


    Dr. Seltsam
    ja, das hab ich mittlerweile auch rausgefunden, nach einem Reboot gings dann komischerweise...


    Mal noch ne andere Frage: Ist es mit einer PVR350 möglich das Bild auf dem Monitor darzustellen so wie es bei einer DVB-s FF geht?

  • Zitat

    Mal noch ne andere Frage: Ist es mit einer PVR350 möglich das Bild auf dem Monitor darzustellen so wie es bei einer DVB-s FF geht?


    nein, das geht nicht. Die entsprechende Option (fbtv oder so ähnlich) darf im setup auch nicht aktiviert sein.

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    Einmal editiert, zuletzt von Dr. Seltsam ()

  • wie läuft es denn? OSD, Umschalten, Wiedergabe, etc. alles i.o.?

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

  • also bis jetzt bekomme ich noch kein Bild... bin aber mittlerweile etwas ratlos. Weiss nicht woran es noch liegen könnte. es wird alles korrekt geladen ich kann auch nach kanälen suchen und die kanalliste speichern. Es erscheint auch nicht mehr "Kanal nicht verfügbar" im log.

  • Du siehst das OSD?


    Du hast eine channels.conf angelegt?


    Poste mal bitte die erste Zeile der channels.conf, die Ausgabe von dmesg und das Log ab Booten bis zum ersten Kanalwechsel

    VDR1: ACT-620, Asus P8B75-M LX, Intel Core i3-3240, 4 GB DDR3 RAM 1600 MHz, passive Geforce GT1030 von MSI, Sandisk 2TB SSD, 2xWinTV DualHD, Atric-IR-Einschalter. SW: Xubuntu 20.04 auf 64GB Sandisk SSD.

    VDR2: Odroid N2+ mit CoreELEC und Ubuntu in chroot, WinTV DualHD

    VDR3: Tanix TX3 mit CoreELEC und Ubuntu in chroot, WinTV DualHD

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!