Ubuntu 11.10, Kernel 3.0, xorg-server 2:1.10.4-1ubuntu4.2
Karte: TeVii S480, doppel DVB-S2, ein IR-Stecker hinten, aber 2(!) event-devices dafür
Hallo,
bin mir nicht sicher ob dies schon gelöst wurde - für mich jedenfalls noch nicht. Alles was ich diesbzgl über "doppelte" codes gelesen habe hatte immer etwas mit "zuviel" codes der Fernbedienung (FB) zutun, also nur eine zu hohe repeat- bzw die Aufnahme-Rate.
Das Problem hier:
Die TeVii S480 hat einen IR-port hinten, wo ich den mitgelieferten Empfänger eingesteckt habe. Die mitgelieferte FB funktioniert damit wunderbar. Das kann man zB testen, wenn man LIRC auf das kernel-event-dev konfiguriert und dann mit irw testet.
LIRC habe ich aber wieder abgeschaltet, sonst hätte ich unter X 3(!) Eingaben derselben Fernbedienung.
evtest:
No device specified, trying to scan all of /dev/input/event*
Available devices:
/dev/input/event0: Power Button
/dev/input/event1: Power Button
/dev/input/event2: AT Translated Set 2 keyboard
/dev/input/event3: Logitech Logitech USB Optical Mouse
/dev/input/event4: IR-receiver inside an USB DVB receiver
/dev/input/event5: IR-receiver inside an USB DVB receiver
Jetzt ist's so, dass beim Drücken auf die FB die IR-codes einfach an beide(!) event-devices (event4 und event5) gesendet werden.
X erkennt wegen udev und hotplugging diese 2 Eingabegeräte und nimmt somit immer doppelte Eingaben an.
Wie kann man X dazu bringen, dass zB /dev/input/event5 einfach ignoriert wird?
dmesg-Auszug:
[ 12.254518] IR NEC protocol handler initialized
[ 12.300676] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 12.318280] IR RC5(x) protocol handler initialized
[ 12.333277] IR RC6 protocol handler initialized
[ 12.382549] IR JVC protocol handler initialized
[ 12.399129] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 12.399137] dw2102: start downloading DW210X firmware
[ 12.400635] IR Sony protocol handler initialized
[ 12.419094] lirc_dev: IR Remote Control driver registered, major 250
[ 12.420998] IR LIRC bridge handler initialized
[ 12.552069] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 12.552211] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 12.552630] DVB: registering new adapter (TeVii S660 USB)
[ 12.562190] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 12.562204] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 12.562734] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 12.562765] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 12.562774] hda_intel: Disabling MSI
[ 12.562860] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 12.662215] nvidia: module license 'NVIDIA' taints kernel.
[ 12.662223] Disabling lock debugging due to kernel taint
[ 12.850407] dvb-usb: MAC address: 00:18:bd:5a:d6:fe
[ 16.245568] DS3000 chip version: 0.192 attached.
[ 16.245953] dw2102: Attached ds3000+ds2020!
[ 16.245956]
[ 16.245965] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 16.248800] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/usb2/2-1/input/input4
[ 16.249415] dvb-usb: schedule remote query interval to 150 msecs.
[ 16.249432] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 16.249500] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 16.255781] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 16.255793] dw2102: start downloading DW210X firmware
[ 16.412062] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 16.412228] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 16.412842] DVB: registering new adapter (TeVii S660 USB)
[ 16.619527] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
[ 16.619576] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 20 (level, low) -> IRQ 20
[ 16.620473] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23
[ 16.620494] nvidia 0000:01:00.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23
[ 16.620519] nvidia 0000:01:00.0: setting latency timer to 64
[ 16.620533] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.621584] NVRM: loading NVIDIA UNIX x86 Kernel Module 280.13 Wed Jul 27 16:55:43 PDT 2011
[ 16.656429] type=1400 audit(1337251980.841:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=738 comm="apparmor_parser"
[ 16.657862] type=1400 audit(1337251980.841:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=738 comm="apparmor_parser"
[ 16.658783] type=1400 audit(1337251980.841:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=738 comm="apparmor_parser"
[ 16.660776] type=1400 audit(1337251980.845:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=770 comm="apparmor_parser"
[ 16.660802] type=1400 audit(1337251980.845:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=748 comm="apparmor_parser"
[ 16.662338] type=1400 audit(1337251980.845:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=748 comm="apparmor_parser"
[ 16.662365] type=1400 audit(1337251980.845:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=770 comm="apparmor_parser"
[ 16.663322] type=1400 audit(1337251980.845:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=748 comm="apparmor_parser"
[ 16.663348] type=1400 audit(1337251980.845:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=770 comm="apparmor_parser"
[ 16.710791] dvb-usb: MAC address: 00:18:bd:5a:d6:ff
[ 16.717695] DS3000 chip version: 0.192 attached.
[ 16.718030] dw2102: Attached ds3000+ds2020!
[ 16.718034]
[ 16.718046] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
[ 16.719595] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0c.0/0000:02:00.3/usb3/3-1/input/input5
[ 16.720170] dvb-usb: schedule remote query interval to 150 msecs.
[ 16.720186] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 16.720378] usbcore: registered new interface driver dw2102
Alles anzeigen
Xorg.0.log:
[ 18.842]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 18.842] X Protocol Version 11, Revision 0
[ 18.842] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[ 18.843] Current Operating System: Linux xbmc 3.0.0-19-generic #33-Ubuntu SMP Thu Apr 19 19:05:57 UTC 2012 i686
[ 18.843] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-19-generic root=UUID=c524f9db-051d-4dcc-b071-1ea4262623e6 ro quiet splash vt.handoff=7
[ 18.843] Build Date: 19 October 2011 05:09:41AM
[ 18.843] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
[ 18.843] Current version of pixman: 0.22.2
[ 18.843] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.843] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.843] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 17 12:53:03 2012
[ 18.849] (==) Using config file: "/etc/X11/xorg.conf"
[ 18.849] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.859] (==) ServerLayout "Layout0"
[ 18.859] (**) |-->Screen "Screen0" (0)
[ 18.859] (**) | |-->Monitor "Monitor0"
[ 18.859] (**) | |-->Device "Device0"
[ 18.859] (**) |-->Input Device "Keyboard0"
[ 18.859] (**) |-->Input Device "Mouse0"
[ 18.860] (==) Automatically adding devices
[ 18.860] (==) Automatically enabling devices
[ 18.870] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 18.870] Entry deleted from font path.
[ 18.870] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 18.870] Entry deleted from font path.
[ 18.870] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 18.870] Entry deleted from font path.
[ 18.871] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 18.871] Entry deleted from font path.
[ 18.871] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 18.871] Entry deleted from font path.
[ 18.878] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 18.878] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 18.878] (**) Extension "Composite" is disabled
[ 18.879] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 18.879] (WW) Disabling Keyboard0
[ 18.879] (WW) Disabling Mouse0
[ 18.879] (II) Loader magic: 0x823ada0
[ 18.879] (II) Module ABI versions:
[ 18.879] X.Org ANSI C Emulation: 0.4
[ 18.879] X.Org Video Driver: 10.0
[ 18.879] X.Org XInput driver : 12.3
[ 18.879] X.Org Server Extension : 5.0
[ 18.881] (--) PCI:*(0:1:0:0) 10de:087d:1849:087d rev 177, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[ 18.882] (II) Open ACPI successful (/var/run/acpid.socket)
[ 18.882] (II) LoadModule: "extmod"
[ 18.888] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 18.892] (II) Module extmod: vendor="X.Org Foundation"
[ 18.892] compiled for 1.10.4, module version = 1.0.0
[ 18.892] Module class: X.Org Server Extension
[ 18.892] ABI class: X.Org Server Extension, version 5.0
[ 18.892] (II) Loading extension MIT-SCREEN-SAVER
[ 18.892] (II) Loading extension XFree86-VidModeExtension
[ 18.892] (II) Loading extension XFree86-DGA
[ 18.893] (II) Loading extension DPMS
[ 18.893] (II) Loading extension XVideo
[ 18.893] (II) Loading extension XVideo-MotionCompensation
[ 18.893] (II) Loading extension X-Resource
[ 18.893] (II) LoadModule: "dbe"
[ 18.894] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 18.896] (II) Module dbe: vendor="X.Org Foundation"
[ 18.896] compiled for 1.10.4, module version = 1.0.0
[ 18.896] Module class: X.Org Server Extension
[ 18.896] ABI class: X.Org Server Extension, version 5.0
[ 18.896] (II) Loading extension DOUBLE-BUFFER
[ 18.896] (II) LoadModule: "glx"
[ 18.896] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/libglx.so
[ 20.361] (II) Module glx: vendor="NVIDIA Corporation"
[ 20.375] compiled for 4.0.2, module version = 1.0.0
[ 20.375] Module class: X.Org Server Extension
[ 20.375] (II) NVIDIA GLX Module 280.13 Wed Jul 27 17:14:51 PDT 2011
[ 20.375] (II) Loading extension GLX
[ 20.375] (II) LoadModule: "record"
[ 20.376] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.920] (II) Module record: vendor="X.Org Foundation"
[ 20.920] compiled for 1.10.4, module version = 1.13.0
[ 20.920] Module class: X.Org Server Extension
[ 20.920] ABI class: X.Org Server Extension, version 5.0
[ 20.920] (II) Loading extension RECORD
[ 20.920] (II) LoadModule: "dri"
[ 20.921] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.939] (II) Module dri: vendor="X.Org Foundation"
[ 20.939] compiled for 1.10.4, module version = 1.0.0
[ 20.939] ABI class: X.Org Server Extension, version 5.0
[ 20.939] (II) Loading extension XFree86-DRI
[ 20.939] (II) LoadModule: "dri2"
[ 20.940] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.944] (II) Module dri2: vendor="X.Org Foundation"
[ 20.944] compiled for 1.10.4, module version = 1.2.0
[ 20.944] ABI class: X.Org Server Extension, version 5.0
[ 20.944] (II) Loading extension DRI2
[ 20.944] (II) LoadModule: "nvidia"
[ 20.944] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/nvidia_drv.so
[ 20.973] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 20.973] compiled for 4.0.2, module version = 1.0.0
[ 20.973] Module class: X.Org Video Driver
[ 20.990] (II) NVIDIA dlloader X Driver 280.13 Wed Jul 27 16:57:12 PDT 2011
[ 20.994] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 20.998] (++) using VT number 7
[ 21.003] (II) Loading sub module "fb"
[ 21.003] (II) LoadModule: "fb"
[ 21.008] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.013] (II) Module fb: vendor="X.Org Foundation"
[ 21.013] compiled for 1.10.4, module version = 1.0.0
[ 21.013] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.013] (II) Loading sub module "wfb"
[ 21.014] (II) LoadModule: "wfb"
[ 21.014] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 21.021] (II) Module wfb: vendor="X.Org Foundation"
[ 21.021] compiled for 1.10.4, module version = 1.0.0
[ 21.021] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.021] (II) Loading sub module "ramdac"
[ 21.021] (II) LoadModule: "ramdac"
[ 21.021] (II) Module "ramdac" already built-in
[ 21.034] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/nvidia_drv.so
[ 21.034] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 21.034] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.045] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 21.045] (==) NVIDIA(0): RGB weight 888
[ 21.045] (==) NVIDIA(0): Default visual is TrueColor
[ 21.045] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 21.045] (**) NVIDIA(0): Option "NoLogo" "True"
[ 21.045] (**) NVIDIA(0): Option "HWcursor" "Off"
[ 21.046] (**) NVIDIA(0): Option "FlatPanelProperties" "Scaling = Native"
[ 21.046] (**) NVIDIA(0): Option "DynamicTwinView" "False"
[ 24.309] (II) NVIDIA(GPU-0): Display (ONK TX-SR507 (DFP-1)) does not support NVIDIA 3D
[ 24.711] (II) NVIDIA(GPU-0): Vision stereo.
[ 25.226] (II) NVIDIA(0): NVIDIA GPU ION (C79) at PCI:1:0:0 (GPU-0)
[ 25.226] (--) NVIDIA(0): Memory: 524288 kBytes
[ 25.227] (--) NVIDIA(0): VideoBIOS: 62.79.78.00.00
[ 25.227] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 25.227] (--) NVIDIA(0): Connected display device(s) on ION at PCI:1:0:0
[ 25.227] (--) NVIDIA(0): ONK TX-SR507 (DFP-1)
[ 25.227] (--) NVIDIA(0): ONK TX-SR507 (DFP-1): 165.0 MHz maximum pixel clock
[ 25.227] (--) NVIDIA(0): ONK TX-SR507 (DFP-1): Internal Single Link TMDS
[ 25.231] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
[ 25.231] (**) NVIDIA(0): enabled on all display devices.
[ 25.382] (II) NVIDIA(0): Assigned Display Device: DFP-1
[ 25.382] (==) NVIDIA(0):
[ 25.382] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 25.382] (==) NVIDIA(0): will be used as the requested mode.
[ 25.382] (==) NVIDIA(0):
[ 25.382] (II) NVIDIA(0): Validated modes:
[ 25.382] (II) NVIDIA(0): "nvidia-auto-select"
[ 25.382] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 25.421] (--) NVIDIA(0): DPI set to (304, 304); computed from "UseEdidDpi" X config
[ 25.421] (--) NVIDIA(0): option
[ 25.421] (--) Depth 24 pixmap format is 32 bpp
[ 25.421] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 25.430] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 25.757] (II) Loading extension NV-GLX
[ 26.988] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 26.988] (==) NVIDIA(0): Backing store disabled
[ 26.988] (==) NVIDIA(0): Silken mouse enabled
[ 26.995] (**) NVIDIA(0): DPMS enabled
[ 26.995] (II) Loading extension NV-CONTROL
[ 26.996] (II) Loading extension XINERAMA
[ 26.996] (II) Loading sub module "dri2"
[ 26.996] (II) LoadModule: "dri2"
[ 26.997] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 26.997] (II) Module dri2: vendor="X.Org Foundation"
[ 26.997] compiled for 1.10.4, module version = 1.2.0
[ 26.997] ABI class: X.Org Server Extension, version 5.0
[ 26.997] (II) NVIDIA(0): [DRI2] Setup complete
[ 26.997] (==) RandR enabled
[ 26.997] (II) Initializing built-in extension Generic Event Extension
[ 26.997] (II) Initializing built-in extension SHAPE
[ 26.997] (II) Initializing built-in extension MIT-SHM
[ 26.997] (II) Initializing built-in extension XInputExtension
[ 26.997] (II) Initializing built-in extension XTEST
[ 26.997] (II) Initializing built-in extension BIG-REQUESTS
[ 26.997] (II) Initializing built-in extension SYNC
[ 26.997] (II) Initializing built-in extension XKEYBOARD
[ 26.997] (II) Initializing built-in extension XC-MISC
[ 26.997] (II) Initializing built-in extension SECURITY
[ 26.997] (II) Initializing built-in extension XINERAMA
[ 26.997] (II) Initializing built-in extension XFIXES
[ 26.998] (II) Initializing built-in extension RENDER
[ 26.998] (II) Initializing built-in extension RANDR
[ 26.998] (II) Initializing built-in extension COMPOSITE
[ 26.998] (II) Initializing built-in extension DAMAGE
[ 26.998] (II) Initializing built-in extension GESTURE
[ 27.007] (II) Initializing extension GLX
[ 27.154] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 27.184] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 27.184] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.184] (II) LoadModule: "evdev"
[ 27.185] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.223] (II) Module evdev: vendor="X.Org Foundation"
[ 27.223] compiled for 1.10.2, module version = 2.6.0
[ 27.223] Module class: X.Org XInput Driver
[ 27.223] ABI class: X.Org XInput driver, version 12.3
[ 27.223] (II) Using input driver 'evdev' for 'Power Button'
[ 27.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.223] (**) Power Button: always reports core events
[ 27.223] (**) Power Button: Device: "/dev/input/event1"
[ 27.224] (--) Power Button: Found keys
[ 27.224] (II) Power Button: Configuring as keyboard
[ 27.224] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 27.224] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 27.224] (**) Option "xkb_rules" "evdev"
[ 27.224] (**) Option "xkb_model" "pc105"
[ 27.224] (**) Option "xkb_layout" "de"
[ 27.233] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[ 27.254] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 27.254] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 27.254] (II) Using input driver 'evdev' for 'Power Button'
[ 27.254] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.254] (**) Power Button: always reports core events
[ 27.254] (**) Power Button: Device: "/dev/input/event0"
[ 27.254] (--) Power Button: Found keys
[ 27.254] (II) Power Button: Configuring as keyboard
[ 27.254] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 27.255] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 27.255] (**) Option "xkb_rules" "evdev"
[ 27.255] (**) Option "xkb_model" "pc105"
[ 27.255] (**) Option "xkb_layout" "de"
[ 27.268] (II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/event3)
[ 27.268] (**) Logitech Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 27.268] (II) Using input driver 'evdev' for 'Logitech Logitech USB Optical Mouse'
[ 27.268] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.268] (**) Logitech Logitech USB Optical Mouse: always reports core events
[ 27.268] (**) Logitech Logitech USB Optical Mouse: Device: "/dev/input/event3"
[ 27.269] (--) Logitech Logitech USB Optical Mouse: Found 3 mouse buttons
[ 27.269] (--) Logitech Logitech USB Optical Mouse: Found scroll wheel(s)
[ 27.269] (--) Logitech Logitech USB Optical Mouse: Found relative axes
[ 27.269] (--) Logitech Logitech USB Optical Mouse: Found x and y relative axes
[ 27.269] (II) Logitech Logitech USB Optical Mouse: Configuring as mouse
[ 27.269] (II) Logitech Logitech USB Optical Mouse: Adding scrollwheel support
[ 27.269] (**) Logitech Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 27.269] (**) Logitech Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 27.269] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb6/6-3/6-3:1.0/input/input3/event3"
[ 27.269] (II) XINPUT: Adding extended input device "Logitech Logitech USB Optical Mouse" (type: MOUSE)
[ 27.269] (II) Logitech Logitech USB Optical Mouse: initialized for relative axes.
[ 27.269] (**) Logitech Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 27.269] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 27.269] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 27.269] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 27.270] (II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/mouse0)
[ 27.270] (II) No input driver/identifier specified (ignoring)
[ 27.283] (II) config/udev: Adding input device IR-receiver inside an USB DVB receiver (/dev/input/event4)
[ 27.283] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall"
[ 27.283] (II) Using input driver 'evdev' for 'IR-receiver inside an USB DVB receiver'
[ 27.283] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.283] (**) IR-receiver inside an USB DVB receiver: always reports core events
[ 27.284] (**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event4"
[ 27.284] (--) IR-receiver inside an USB DVB receiver: Found keys
[ 27.284] (II) IR-receiver inside an USB DVB receiver: Configuring as keyboard
[ 27.284] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0c.0/0000:02:00.1/usb2/2-1/input/input4/event4"
[ 27.284] (II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD)
[ 27.284] (**) Option "xkb_rules" "evdev"
[ 27.284] (**) Option "xkb_model" "pc105"
[ 27.284] (**) Option "xkb_layout" "de"
[ 27.289] (II) config/udev: Adding input device IR-receiver inside an USB DVB receiver (/dev/input/event5)
[ 27.290] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall"
[ 27.290] (II) Using input driver 'evdev' for 'IR-receiver inside an USB DVB receiver'
[ 27.290] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.290] (**) IR-receiver inside an USB DVB receiver: always reports core events
[ 27.290] (**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event5"
[ 27.290] (--) IR-receiver inside an USB DVB receiver: Found keys
[ 27.290] (II) IR-receiver inside an USB DVB receiver: Configuring as keyboard
[ 27.290] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0c.0/0000:02:00.3/usb3/3-1/input/input5/event5"
[ 27.290] (II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD)
[ 27.290] (**) Option "xkb_rules" "evdev"
[ 27.290] (**) Option "xkb_model" "pc105"
[ 27.290] (**) Option "xkb_layout" "de"
[ 27.298] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 27.299] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 27.299] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 27.299] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 27.299] (**) AT Translated Set 2 keyboard: always reports core events
[ 27.299] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 27.299] (--) AT Translated Set 2 keyboard: Found keys
[ 27.299] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 27.299] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 27.299] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 27.299] (**) Option "xkb_rules" "evdev"
[ 27.299] (**) Option "xkb_model" "pc105"
[ 27.299] (**) Option "xkb_layout" "de"
[ 424.124] (II) Open ACPI successful (/var/run/acpid.socket)
Alles anzeigen
xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 (buildmeister@swio-display-x86-rhel47-05.nvidia.com) Wed Jul 27 17:18:55 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Option "HWCursor" "Off"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "True"
Option "DynamicTwinView" "False"
Option "FlatPanelProperties" "Scaling = Native"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Alles anzeigen