ZitatOriginal von HTPC2010
Wenn ich sage ich nutze das Terminal im VDR, dann meine ich das Terminal im VDR.
Und ich habe in meinem Beitrag gesagt, das es 2 Typen von Terminals im VDR gibt. Es gibt nicht DAS Terminal.
Gerald
ZitatOriginal von HTPC2010
Wenn ich sage ich nutze das Terminal im VDR, dann meine ich das Terminal im VDR.
Und ich habe in meinem Beitrag gesagt, das es 2 Typen von Terminals im VDR gibt. Es gibt nicht DAS Terminal.
Gerald
Kannst du mit bei meinem Problem behilflich sein, wär nett, wenn nicht ist es sicher nicht konstruktiv das wir nun über Dinge reden, die nicht mit dem Thema zu tun haben..
ZitatOriginal von HTPC2010
Kannst du mit bei meinem Problem behilflich sein, wär nett, wenn nicht ist es sicher nicht konstruktiv das wir nun über Dinge reden, die nicht mit dem Thema zu tun haben..
Was soll denn das jetzt? Du hast gefragt wie man zwischen Terminal und Firefox Text kopiert und ich habe dir erklärt wie man es macht, schon vergessen?
Gerald
ZitatOriginal von gda
Was soll denn das jetzt? Du hast gefragt wie man zwischen Terminal und Firefox Text kopiert und ich habe dir erklärt wie man es macht, schon vergessen?
Gerald
Ja, hast du Recht - aber ich hab ja nun darauf hingewiesen, dass ich nun ein Remote-Terminal nutze! Deswegen ist es nun nicht weiter von Belangen! Dennoch danke ich dir für deine Hilfe, bei diesem doch leicht abgeschweiftem Thema
Wenn ich jetzt noch ne Lösung für mein Problem hätte, wär´s noch besser!
ZitatOriginal von utiltiy
BTW, ist schon etwas verwirrend das Du quer in diesen Thread einsteigst mit Deinem Problem ohne nähere Infos und nach einer Lösung frägst.
http://www.vdr-portal.de/board/thread.php?threadid=99402
ZitatOriginal von steffen_b
Lass mal ich habe eben als erstes an eine Fehlfonktion von mir oder dem vdrportal gedacht. Schon witzig. Das doppelte Lottchen.
Am besten beide mal die Ausgabe von lsmod hier posten, oder im anderen Thread. Müssten mindestens 2 Module per Karte sein.
BTW. Dein Vorschlag werd ich gleich mal testen! Wär schön wenns funzt!
Hier nochmal einige Logs:
/var/log/messages
Sep 11 21:40:41 VDR kernel: [ 635.486693] parport_pc 00:04: disabled
Sep 11 21:40:41 VDR kernel: [ 635.507822] budget_ci dvb 0000:01:06.0: PCI INT A disabled
Sep 11 21:40:41 VDR kernel: [ 635.508560] forcedeth 0000:00:0a.0: PME# enabled
Sep 11 21:40:41 VDR kernel: [ 635.508565] forcedeth 0000:00:0a.0: wake-up capability enabled by ACPI
Sep 11 21:40:41 VDR kernel: [ 635.636061] PM: suspend of drv:ahci dev:0000:00:09.0 complete after 112.016 msecs
Sep 11 21:40:41 VDR kernel: [ 635.876061] HDA Intel 0000:00:07.0: PCI INT A disabled
Sep 11 21:40:41 VDR kernel: [ 635.892233] HDA Intel 0000:00:07.0: power state changed by ACPI to D3
Sep 11 21:40:41 VDR kernel: [ 635.892245] PM: suspend of drv:HDA Intel dev:0000:00:07.0 complete after 256.173 msecs
Sep 11 21:40:41 VDR kernel: [ 635.908067] ehci_hcd 0000:00:04.1: PCI INT B disabled
Sep 11 21:40:41 VDR kernel: [ 635.908079] ohci_hcd 0000:00:04.0: PCI INT A disabled
Sep 11 21:40:41 VDR kernel: [ 635.908089] ehci_hcd 0000:00:02.1: PCI INT B disabled
Sep 11 21:40:41 VDR kernel: [ 635.908098] ohci_hcd 0000:00:02.0: PCI INT A disabled
Sep 11 21:40:41 VDR kernel: [ 635.908222] PM: suspend of devices complete after 2334.487 msecs
Sep 11 21:40:41 VDR kernel: [ 635.908228] PM: suspend devices took 2.336 seconds
Sep 11 21:40:41 VDR kernel: [ 635.972304] PM: late suspend of devices complete after 64.065 msecs
Sep 11 21:40:41 VDR kernel: [ 635.973563] ACPI: Preparing to enter system sleep state S3
Sep 11 21:40:41 VDR kernel: [ 635.992042] Disabling non-boot CPUs ...
Sep 11 21:40:41 VDR kernel: [ 636.058519] CPU 1 is now offline
Sep 11 21:40:41 VDR kernel: [ 636.061758] CPU 2 is now offline
Sep 11 21:40:41 VDR kernel: [ 636.064895] CPU 3 is now offline
Sep 11 21:40:41 VDR kernel: [ 636.064899] SMP alternatives: switching to UP code
Sep 11 21:40:41 VDR kernel: [ 636.076028] Enabling non-boot CPUs ...
Sep 11 21:40:41 VDR kernel: [ 636.076171] SMP alternatives: switching to SMP code
Sep 11 21:40:41 VDR kernel: [ 636.078807] Booting processor 1 APIC 0x1 ip 0x6000
Sep 11 21:40:41 VDR kernel: [ 636.058696] Initializing CPU#1
Sep 11 21:40:41 VDR kernel: [ 636.058696] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Sep 11 21:40:41 VDR kernel: [ 636.058696] CPU: L2 Cache: 512K (64 bytes/line)
Sep 11 21:40:41 VDR kernel: [ 636.058696] CPU: Physical Processor ID: 0
Sep 11 21:40:41 VDR kernel: [ 636.058696] CPU: Processor Core ID: 1
Sep 11 21:40:41 VDR kernel: [ 636.168067] CPU1: AMD Phenom(tm) II X4 945 Processor stepping 02
Sep 11 21:40:41 VDR kernel: [ 636.168080] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep 11 21:40:41 VDR kernel: [ 636.220037] CPU1 is up
Sep 11 21:40:41 VDR kernel: [ 636.220502] Booting processor 2 APIC 0x2 ip 0x6000
Sep 11 21:40:41 VDR kernel: [ 636.061870] Initializing CPU#2
Sep 11 21:40:41 VDR kernel: [ 636.061870] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Sep 11 21:40:41 VDR kernel: [ 636.061870] CPU: L2 Cache: 512K (64 bytes/line)
Sep 11 21:40:41 VDR kernel: [ 636.061870] CPU: Physical Processor ID: 0
Sep 11 21:40:41 VDR kernel: [ 636.061870] CPU: Processor Core ID: 2
Sep 11 21:40:41 VDR kernel: [ 636.308036] CPU2: AMD Phenom(tm) II X4 945 Processor stepping 02
Sep 11 21:40:41 VDR kernel: [ 636.308075] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Sep 11 21:40:41 VDR kernel: [ 636.393456] CPU2 is up
Sep 11 21:40:41 VDR kernel: [ 636.393833] Booting processor 3 APIC 0x3 ip 0x6000
Sep 11 21:40:41 VDR kernel: [ 636.072776] Initializing CPU#3
Sep 11 21:40:41 VDR kernel: [ 636.072776] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Sep 11 21:40:41 VDR kernel: [ 636.072776] CPU: L2 Cache: 512K (64 bytes/line)
Sep 11 21:40:41 VDR kernel: [ 636.072776] CPU: Physical Processor ID: 0
Sep 11 21:40:41 VDR kernel: [ 636.072776] CPU: Processor Core ID: 3
Sep 11 21:40:41 VDR kernel: [ 636.484546] CPU3: AMD Phenom(tm) II X4 945 Processor stepping 02
Sep 11 21:40:41 VDR kernel: [ 636.484586] checking TSC synchronization [CPU#1 -> CPU#3]: passed.
Sep 11 21:40:41 VDR kernel: [ 636.553084] CPU3 is up
Sep 11 21:40:41 VDR kernel: [ 636.556372] ACPI: Waking up from system sleep state S3
Sep 11 21:40:41 VDR kernel: [ 636.561612] pci 0000:00:08.0: Enabling HT MSI Mapping
Sep 11 21:40:41 VDR kernel: [ 636.561803] ahci 0000:00:09.0: Enabling HT MSI Mapping
Sep 11 21:40:41 VDR kernel: [ 636.562002] forcedeth 0000:00:0a.0: Enabling HT MSI Mapping
Sep 11 21:40:41 VDR kernel: [ 636.562188] pci 0000:00:0b.0: Enabling HT MSI Mapping
Sep 11 21:40:41 VDR kernel: [ 636.562909] PM: early resume of devices complete after 2.000 msecs
Sep 11 21:40:41 VDR kernel: [ 636.563103] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21
Sep 11 21:40:41 VDR kernel: [ 636.584079] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
Sep 11 21:40:41 VDR kernel: [ 636.584118] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 20 (level, low) -> IRQ 20
Sep 11 21:40:41 VDR kernel: [ 636.608075] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 22 (level, low) -> IRQ 22
Sep 11 21:40:41 VDR kernel: [ 636.612701] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
Sep 11 21:40:41 VDR kernel: [ 636.612810] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
Sep 11 21:40:41 VDR kernel: [ 636.612909] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
Sep 11 21:40:41 VDR kernel: [ 636.613005] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
Sep 11 21:40:41 VDR kernel: [ 636.613022] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
Sep 11 21:40:41 VDR kernel: [ 636.613212] forcedeth 0000:00:0a.0: wake-up capability disabled by ACPI
Sep 11 21:40:41 VDR kernel: [ 636.613220] forcedeth 0000:00:0a.0: PME# disabled
Sep 11 21:40:41 VDR kernel: [ 636.677739] eth0: no link during initialization.
Sep 11 21:40:41 VDR kernel: [ 636.677925] budget_ci dvb 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17
Sep 11 21:40:41 VDR kernel: [ 636.932066] ata5: SATA link down (SStatus 0 SControl 300)
Sep 11 21:40:41 VDR kernel: [ 636.932093] ata4: SATA link down (SStatus 0 SControl 300)
Sep 11 21:40:41 VDR kernel: [ 636.932110] ata2: SATA link down (SStatus 0 SControl 300)
Sep 11 21:40:41 VDR kernel: [ 636.932132] ata6: SATA link down (SStatus 0 SControl 300)
Sep 11 21:40:41 VDR kernel: [ 638.303146] eth0: link up.
Sep 11 21:40:41 VDR kernel: [ 641.240051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 11 21:40:41 VDR kernel: [ 641.254496] ata1.00: configured for UDMA/133
Sep 11 21:40:41 VDR kernel: [ 644.948050] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 11 21:40:41 VDR kernel: [ 644.981267] ata3.00: configured for UDMA/133
Sep 11 21:40:41 VDR kernel: [ 645.334159] PM: resume of drv:nvidia dev:0000:02:00.0 complete after 8656.215 msecs
Sep 11 21:40:41 VDR kernel: [ 645.336649] parport_pc 00:04: activated
Sep 11 21:40:41 VDR kernel: [ 645.341061] serial 00:0b: activated
Sep 11 21:40:41 VDR kernel: [ 645.654119] sd 0:0:0:0: [sda] Starting disk
Sep 11 21:40:41 VDR kernel: [ 645.979634] PM: resume of drv:sd dev:0:0:0:0 complete after 325.514 msecs
Sep 11 21:40:41 VDR kernel: [ 645.979650] sd 2:0:0:0: [sdb] Starting disk
Sep 11 21:40:41 VDR kernel: [ 646.041200] PM: resume of devices complete after 9478.225 msecs
Sep 11 21:40:41 VDR kernel: [ 646.041488] PM: resume devices took 9.480 seconds
Sep 11 21:40:41 VDR kernel: [ 646.041557] Restarting tasks ... done.
Sep 11 21:40:44 VDR kernel: [ 649.632095] tda10023: lock tuner fails
Sep 11 21:40:44 VDR kernel: [ 649.692135] tda10023: unlock tuner fails
Sep 11 21:40:44 VDR kernel: [ 649.744732] lirc_imon: IR port opened
Sep 11 21:40:51 VDR kernel: [ 656.364055] dvb_ca adaptor 0: PC card did not respond :(
Sep 11 21:40:51 VDR kernel: [ 656.612075] tda10023: lock tuner fails
Sep 11 21:40:51 VDR kernel: [ 656.732086] tda10023: unlock tuner fails
Sep 11 21:40:51 VDR kernel: [ 656.792092] tda10023: unlock tuner fails
Sep 11 21:40:53 VDR kernel: [ 657.956103] tda10023: lock tuner fails
Sep 11 21:40:53 VDR kernel: [ 658.076092] tda10023: unlock tuner fails
Sep 11 21:40:53 VDR kernel: [ 658.136074] tda10023: unlock tuner fails
Sep 11 21:40:54 VDR kernel: [ 659.300072] tda10023: lock tuner fails
Sep 11 21:40:54 VDR kernel: [ 659.420071] tda10023: unlock tuner fails
Sep 11 21:40:54 VDR kernel: [ 659.480073] tda10023: unlock tuner fails
Alles anzeigen
/var/log/user.log
Sep 11 21:40:41 VDR vdr: [2430] video directory scanner thread ended (pid=2345, tid=2430)
Sep 11 21:40:41 VDR vdr: [2345] registered source parameters for 'A - ATSC'
Sep 11 21:40:41 VDR vdr: [2345] registered source parameters for 'C - DVB-C'
Sep 11 21:40:41 VDR vdr: [2345] registered source parameters for 'S - DVB-S'
Sep 11 21:40:41 VDR vdr: [2345] registered source parameters for 'T - DVB-T'
Sep 11 21:40:41 VDR vdr: [2345] probing /dev/dvb/adapter0/frontend0
Sep 11 21:40:41 VDR vdr: [2345] creating cDvbDevice
Sep 11 21:40:41 VDR vdr: [2345] new device number 1
Sep 11 21:40:41 VDR vdr: [2345] LNB-sharing: setting device 0 to use LNB 1
Sep 11 21:40:41 VDR vdr: [2439] CI adapter on device 0 thread started (pid=2345, tid=2439)
Sep 11 21:40:41 VDR vdr: [2439] CAM 1: module present
Sep 11 21:40:44 VDR vdr: [2345] frontend 0/0 provides DVB-C with QPSK,QAM16,QAM32,QAM64,QAM128,QAM256 ("Philips TDA10023 DVB-C")
Sep 11 21:40:44 VDR vdr: [2467] section handler thread started (pid=2345, tid=2467)
Sep 11 21:40:44 VDR vdr: [2345] found 1 DVB device
Sep 11 21:40:44 VDR vdr: [2466] tuner on frontend 0/0 thread started (pid=2345, tid=2466)
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: xine (0.9.3): Software-basierte Wiedergabe mittels xine
Sep 11 21:40:44 VDR vdr: [2468] XineRemote control thread started (pid=2345, tid=2468)
Sep 11 21:40:44 VDR vdr: [2345] new device number 9
Sep 11 21:40:44 VDR vdr: [2468] Entering cXineRemote thread
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: channellists (0.0.4): Verwalte deine Kanallisten
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: avolctl (0.3b): Alsa Volume Control
Sep 11 21:40:44 VDR vdr: [2345] plugin 'avolctl' called obsolete function RegisterI18n()
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: wirbelscan (0.0.5-pre12a): DVB and pvrinput channel scan for VDR
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: extrecmenu (1.3-beta1): Erweitertes Aufzeichnungs-Menü
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: femon (1.7.7): DVB Signal Informationsanzeige (OSD)
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: conflictcheckonly (0.0.1): Direkter Zugriff auf epgsearch's Konflikt-Prüfungs-Menü
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: live (0.2.0): Live Interactive VDR Environment
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: text2skin (1.3.1): Lader für textbasierte Skins
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: streamdev-server (0.5.0-pre): VDR Streaming Server
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: quickepgsearch (0.0.1): Schnelle Suche nach Sendungen
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: epgsearch (0.9.25.beta17): Suche im EPG nach Wiederholungen und anderem
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: iptv (0.4.2): Erlebe IPTV
Sep 11 21:40:44 VDR vdr: [2345] registered source parameters for 'I - IPTV'
Sep 11 21:40:44 VDR vdr: [2345] new device number 10
Sep 11 21:40:44 VDR vdr: [2345] creating IPTV device 0 (CardIndex=9)
Sep 11 21:40:44 VDR vdr: [2469] section handler thread started (pid=2345, tid=2469)
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: epgsearchonly (0.0.1): Direkter Zugriff auf epgsearch's Suchenmenu
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: vnsiserver (0.0.1): VDR-Network-Streaming-Interface (VNSI) Server
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: menuorg (0.4.4): Reorganisiert das Haupmenü
Sep 11 21:40:44 VDR vdr: [2345] loading menuorg config file from /var/lib/vdr/plugins/menuorg.xml
Sep 11 21:40:44 VDR vdr: [2345] initializing plugin: externalplayer (0.1.0): launch external players
Sep 11 21:40:44 VDR vdr: [2345] setting primary device to 2
Sep 11 21:40:44 VDR vdr: [2345] assuming manual start of VDR
Sep 11 21:40:44 VDR vdr: [2345] SVDRP listening on port 6419
Sep 11 21:40:44 VDR vdr: [2345] skin "PearlHD" not available - using "classic" instead
Sep 11 21:40:44 VDR vdr: [2345] loading /var/lib/vdr/themes/classic-default.theme
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: xine
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: channellists
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: avolctl
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: wirbelscan
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: extrecmenu
Sep 11 21:40:44 VDR vdr: [2472] extrecmenu worker thread thread started (pid=2345, tid=2472)
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: femon
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: conflictcheckonly
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: live
Sep 11 21:40:44 VDR vdr: [2345] LIVE: initial file cache has 82 entries and needs 307010 bytes of data!
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: text2skin
Sep 11 21:40:44 VDR vdr: [2345] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.colors
Sep 11 21:40:44 VDR vdr: [2345] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_FS/anthra_1920_FS.skin
Sep 11 21:40:44 VDR vdr: [2473] ERROR: Unable to load cert/key (/var/lib/vdr/plugins/live/live.pem//var/lib/vdr/plugins/live/live-key.pem): No such file or directory
Sep 11 21:40:44 VDR vdr: [2345] text2skin: loading /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.colors
Sep 11 21:40:44 VDR vdr: [2345] parsing /var/lib/vdr/plugins/text2skin/PearlHD/PearlHD.skin
Sep 11 21:40:44 VDR vdr: [2345] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.colors
Sep 11 21:40:44 VDR vdr: [2345] parsing /var/lib/vdr/plugins/text2skin/anthra_1920_OS/anthra_1920_OS.skin
Sep 11 21:40:44 VDR vdr: [2345] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.colors
Sep 11 21:40:44 VDR vdr: [2345] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_OS/anthra_1280_OS.skin
Sep 11 21:40:44 VDR vdr: [2345] text2skin: loading /var/lib/vdr/plugins/text2skin/anthra_1280_FS/anthra_1280_FS.colors
Sep 11 21:40:44 VDR vdr: [2345] parsing /var/lib/vdr/plugins/text2skin/anthra_1280_FS/anthra_1280_FS.skin
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: streamdev-server
Sep 11 21:40:44 VDR vdr: [2345] loading /var/lib/vdr/plugins/streamdev/streamdevhosts.conf
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: quickepgsearch
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: epgsearch
Sep 11 21:40:44 VDR vdr: [2345] loading /var/lib/vdr/plugins/epgsearch/epgsearchcats.conf
Sep 11 21:40:44 VDR vdr: [2345] loading /var/lib/vdr/plugins/epgsearch/epgsearchmenu.conf
Sep 11 21:40:44 VDR vdr: [2481] streamdev server thread started (pid=2345, tid=2481)
Sep 11 21:40:44 VDR vdr: [2481] Streamdev: Listening (VTP) on port 2004
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: iptv
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: epgsearchonly
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: vnsiserver
Sep 11 21:40:44 VDR vdr: [2345] VNSI: VNSI Server started
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: menuorg
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: externalplayer
Sep 11 21:40:44 VDR vdr: [2345] plugin 'externalplayer' called obsolete function RegisterI18n()
Sep 11 21:40:44 VDR vdr: [2481] Streamdev: Listening (HTTP) on port 3000
Sep 11 21:40:44 VDR vdr: [2345] setting current skin to "PearlHD"
Sep 11 21:40:44 VDR vdr: [2345] loading /var/lib/vdr/themes/PearlHD-default.theme
Sep 11 21:40:44 VDR vdr: [2482] EPGSearch: conflictcheck thread started (pid=2345, tid=2482)
Sep 11 21:40:44 VDR vdr: [2345] ERROR: remote control XineRemote not ready!
Sep 11 21:40:44 VDR vdr: [2345] remote control LIRC - keys known
Sep 11 21:40:44 VDR vdr: [2483] VDR VNSI Server thread started (pid=2345, tid=2483)
Sep 11 21:40:44 VDR vdr: [2484] LIRC remote control thread started (pid=2345, tid=2484)
Sep 11 21:40:51 VDR vdr: [2345] switching to channel 11
Sep 11 21:40:51 VDR vdr: [2506] receiver on device 1 thread started (pid=2345, tid=2506)
Sep 11 21:40:51 VDR vdr: [2345] setting watchdog timer to 60 seconds
Sep 11 21:40:51 VDR vdr: [2507] TS buffer on device 1 thread started (pid=2345, tid=2507)
Sep 11 21:40:51 VDR vdr: [2345] OSD size changed to 1920x1080 @ 0.75
Sep 11 21:40:51 VDR vdr: [2508] Text2Skin: channelInfo display update thread started (pid=2345, tid=2508)
Sep 11 21:40:51 VDR vdr: [2482] EPGSearch: timer conflict check started
Sep 11 21:40:51 VDR vdr: [2482] EPGSearch: timer conflict check finished
Sep 11 21:40:51 VDR vdr: [2439] CAM 1: no module present
Alles anzeigen
/var/log/syslog
Sep 11 21:40:44 VDR vdr: [2345] starting plugin: externalplayer
Sep 11 21:40:44 VDR vdr: [2345] plugin 'externalplayer' called obsolete function RegisterI18n()
Sep 11 21:40:44 VDR vdr: [2481] Streamdev: Listening (HTTP) on port 3000
Sep 11 21:40:44 VDR vdr: [2345] setting current skin to "PearlHD"
Sep 11 21:40:44 VDR vdr: [2345] loading /var/lib/vdr/themes/PearlHD-default.theme
Sep 11 21:40:44 VDR lircd-0.8.6[791]: accepted new client on /var/run/lirc/lircd
Sep 11 21:40:44 VDR vdr: [2482] EPGSearch: conflictcheck thread started (pid=2345, tid=2482)
Sep 11 21:40:44 VDR vdr: [2345] ERROR: remote control XineRemote not ready!
Sep 11 21:40:44 VDR vdr: [2345] remote control LIRC - keys known
Sep 11 21:40:44 VDR vdr: [2483] VDR VNSI Server thread started (pid=2345, tid=2483)
Sep 11 21:40:44 VDR vdr: [2484] LIRC remote control thread started (pid=2345, tid=2484)
Sep 11 21:40:44 VDR kernel: [ 649.744732] lirc_imon: IR port opened
Sep 11 21:40:44 VDR kernel: [ 649.760093] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:45 VDR dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
Sep 11 21:40:45 VDR dhclient: DHCPOFFER of 192.168.1.55 from 192.168.1.1
Sep 11 21:40:45 VDR dhclient: DHCPREQUEST of 192.168.1.55 on eth0 to 255.255.255.255 port 67
Sep 11 21:40:45 VDR acpid: client 815[0:0] has disconnected
Sep 11 21:40:45 VDR acpid: client 815[0:0] has disconnected
Sep 11 21:40:45 VDR acpid: client connected from 815[0:0]
Sep 11 21:40:45 VDR acpid: 1 client rule loaded
Sep 11 21:40:45 VDR acpid: client connected from 815[0:0]
Sep 11 21:40:45 VDR acpid: 1 client rule loaded
Sep 11 21:40:45 VDR kernel: [ 650.828144] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:47 VDR kernel: [ 651.896107] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:47 VDR acpid: client 815[0:0] has disconnected
Sep 11 21:40:47 VDR acpid: client 815[0:0] has disconnected
Sep 11 21:40:47 VDR acpid: client connected from 815[0:0]
Sep 11 21:40:47 VDR acpid: 1 client rule loaded
Sep 11 21:40:47 VDR acpid: client connected from 815[0:0]
Sep 11 21:40:47 VDR acpid: 1 client rule loaded
Sep 11 21:40:48 VDR lircd-0.8.6[791]: accepted new client on /var/run/lirc/lircd
Sep 11 21:40:48 VDR lircd-0.8.6[791]: removed client
Sep 11 21:40:48 VDR kernel: [ 652.965238] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:49 VDR kernel: [ 654.032088] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:50 VDR kernel: [ 655.100088] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:51 VDR kernel: [ 656.168097] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:51 VDR kernel: [ 656.364055] dvb_ca adaptor 0: PC card did not respond :(
Sep 11 21:40:51 VDR vdr: [2345] switching to channel 11
Sep 11 21:40:51 VDR vdr: [2506] receiver on device 1 thread started (pid=2345, tid=2506)
Sep 11 21:40:51 VDR vdr: [2345] setting watchdog timer to 60 seconds
Sep 11 21:40:51 VDR vdr: [2507] TS buffer on device 1 thread started (pid=2345, tid=2507)
Sep 11 21:40:51 VDR vdr: [2345] OSD size changed to 1920x1080 @ 0.75
Sep 11 21:40:51 VDR vdr: [2508] Text2Skin: channelInfo display update thread started (pid=2345, tid=2508)
Sep 11 21:40:51 VDR kernel: [ 656.528580] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:51 VDR kernel: [ 656.612075] tda10023: lock tuner fails
Sep 11 21:40:51 VDR kernel: [ 656.732086] tda10023: unlock tuner fails
Sep 11 21:40:51 VDR kernel: [ 656.732096] tda827xa_set_params: could not write to tuner at addr: 0xc2
Sep 11 21:40:51 VDR vdr: [2482] EPGSearch: timer conflict check started
Sep 11 21:40:51 VDR vdr: [2482] EPGSearch: timer conflict check finished
Sep 11 21:40:51 VDR kernel: [ 656.792092] tda10023: unlock tuner fails
Sep 11 21:40:51 VDR vdr: [2439] CAM 1: no module present
Sep 11 21:40:51 VDR kernel: [ 656.852099] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x03, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 656.912096] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x03, val == 0x00, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 656.972075] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x0a, val == 0xed, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.032079] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x0b, val == 0x1b, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.092074] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x0c, val == 0x1e, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.152074] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x0d, val == 0x88, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.212074] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x3d, val == 0x00, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.272077] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x05, val == 0x26, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.332091] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x08, val == 0x23, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.392092] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x09, val == 0x6c, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.452093] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0xb4, val == 0x5c, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.512081] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0xb6, val == 0x3c, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.572075] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x04, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.632076] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x04, val == 0x40, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.692073] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x00, val == 0x32, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.752077] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x00, val == 0x33, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.812113] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:52 VDR kernel: [ 657.872074] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:53 VDR dhclient: DHCPREQUEST of 192.168.1.55 on eth0 to 255.255.255.255 port 67
Sep 11 21:40:53 VDR dhclient: DHCPACK of 192.168.1.55 from 192.168.1.1
Sep 11 21:40:53 VDR kernel: [ 657.956103] tda10023: lock tuner fails
Sep 11 21:40:53 VDR dhclient: bound to 192.168.1.55 -- renewal in 251472 seconds.
Sep 11 21:40:53 VDR init: ssh main process (1885) terminated with status 255
Sep 11 21:40:53 VDR kernel: [ 658.076092] tda10023: unlock tuner fails
Sep 11 21:40:53 VDR kernel: [ 658.076101] tda827xa_set_params: could not write to tuner at addr: 0xc2
Sep 11 21:40:53 VDR kernel: [ 658.136074] tda10023: unlock tuner fails
Sep 11 21:40:53 VDR kernel: [ 658.196088] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x03, ret == -121)
Sep 11 21:40:53 VDR anacron[2604]: Anacron 2.3 started on 2010-09-11
Sep 11 21:40:53 VDR anacron[2604]: Normal exit (0 jobs run)
Sep 11 21:40:53 VDR kernel: [ 658.256119] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x03, val == 0x00, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.316093] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x0a, val == 0xed, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.376092] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x0b, val == 0x1b, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.436074] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x0c, val == 0x1e, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.496080] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x0d, val == 0x88, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.556075] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x3d, val == 0x00, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.616077] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x05, val == 0x26, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.676076] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x08, val == 0x23, ret == -121)
Sep 11 21:40:53 VDR ntpdate[2546]: adjust time server 91.189.94.4 offset 0.213078 sec
Sep 11 21:40:53 VDR kernel: [ 658.736096] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x09, val == 0x6c, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.796074] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0xb4, val == 0x5c, ret == -121)
Sep 11 21:40:53 VDR kernel: [ 658.856078] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0xb6, val == 0x3c, ret == -121)
Sep 11 21:40:54 VDR kernel: [ 658.916073] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x04, ret == -121)
Sep 11 21:40:54 VDR kernel: [ 658.952023] eth0: no IPv6 routers present
Sep 11 21:40:54 VDR kernel: [ 658.976076] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x04, val == 0x40, ret == -121)
Sep 11 21:40:54 VDR kernel: [ 659.036080] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x00, val == 0x32, ret == -121)
Sep 11 21:40:54 VDR kernel: [ 659.096075] DVB: TDA10023(0): tda10023_writereg, writereg error (reg == 0x00, val == 0x33, ret == -121)
Sep 11 21:40:54 VDR kernel: [ 659.156075] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:54 VDR kernel: [ 659.216076] DVB: TDA10023(0): tda10023_readreg: readreg error (reg == 0x11, ret == -121)
Sep 11 21:40:54 VDR kernel: [ 659.300072] tda10023: lock tuner fails
Alles anzeigen
Keiner mehr ne Idee? Hier sollte mein VDR-Vorhaben eigentlich nicht scheitern!
ZitatOriginal von HTPC2010
Keiner mehr ne Idee? Hier sollte mein VDR-Vorhaben eigentlich nicht scheitern!
Die Ideen sollten eigentlich von dir kommen, lass dir doch nicht alles vorkauen. Sieh doch mal im /var/log/pm-suspend.log nach ob der force-reload der Module überhaupt geklappt hat. Entferne mal alle Module wieder aus force-reload und probiere es per Hand nach dem Aufwachen aus S3. Also erst mal "stop vdr" und dann mit modprobe -r <module> die Module entfernen uns dann wieder mit modprobe <module> hinzufügen und mit start vdr ausprobieren. Versuche eine Kombination zu finden die funktioniert.
Gerald
Danke für den Tipp.
Ich hab nun mal in die pm-suspend.log rein geschaut und folgendes ist mir aufgefallen:
usb-wakeup start/running, process 1528
success.
/etc/pm/sleep.d/30force-reload suspend suspend:success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:disabled.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend:FATAL: Module nvidia not found. !!!!!!!!!!!!!! Fehler ?????????????
/usr/lib/pm-utils/functions: line 89: log: command not found
FATAL: Module tda10023 is in use. !!!!!!!!!!!!!! Fehler ?????????????
/usr/lib/pm-utils/functions: line 89: log: command not found
success.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend:not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:disabled.
/usr/lib/pm-utils/sleep.d/95anacron suspend suspend:success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend:disabled.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:disabled.
/usr/lib/pm-utils/sleep.d/99video suspend suspend:disabled.
/etc/pm/sleep.d/action_wpa suspend suspend:success.
Sun Sep 12 12:16:02 CEST 2010: performing suspend
Sun Sep 12 12:16:35 CEST 2010: Awake.
Sun Sep 12 12:16:35 CEST 2010: Running hooks for resume
/etc/pm/sleep.d/action_wpa resume suspend:success.
/usr/lib/pm-utils/sleep.d/99video resume suspend:disabled.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:disabled.
/usr/lib/pm-utils/sleep.d/95led resume suspend:disabled.
/usr/lib/pm-utils/sleep.d/95anacron resume suspend:success.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:disabled.
/usr/lib/pm-utils/sleep.d/90clock resume suspend:not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend:success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend:not applicable.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:disabled.
/etc/pm/sleep.d/30force-reload resume suspend:success.
/etc/pm/sleep.d/20vdr_sleep resume suspend:vdr gets started again
vdr start/running, process 1659
network-interface (lo) start/running
network-interface (eth0) start/running
success.
/etc/pm/sleep.d/10_grub-common resume suspend:success.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend:success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend:success.
/usr/lib/pm-utils/sleep.d/000kernel-change resume suspend:success.
Sun Sep 12 12:16:42 CEST 2010: Finished.
Alles anzeigen
Außerdem habe ich die force-reload gelöscht, aber vorher noch das hier gefunden - - Das erledigt sich allerdings nach dem ich die force-reload gelöscht habe!
/etc/pm/sleep.d/30force-reload resume suspend:ERROR: Module "tda827x" does not exist in /proc/modules
ERROR: Module "tda10023" does not exist in /proc/modules
ERROR: Module "saa7146" does not exist in /proc/modules
ERROR: Module "dvb_core" does not exist in /proc/modules
ERROR: Module "budget" does not exist in /proc/modules
ERROR: Module "budget_core" does not exist in /proc/modules
FATAL: Module "tda827x" not found.
FATAL: Module "tda10023" not found.
FATAL: Module "saa7146" not found.
FATAL: Module "dvb_core" not found.
FATAL: Module "budget" not found.
FATAL: Module "budget_core" not found.
success.
Alles anzeigen
Meine /proc/modules sieht so aus:
autofs4 22715 2 - Live 0xf812a000
snd_hda_codec_nvhdmi 3840 1 - Live 0xf8080000
snd_hda_codec_realtek 203310 1 - Live 0xf8673000
nfsd 238967 13 - Live 0xf85f2000
exportfs 3437 1 nfsd, Live 0xf804f000
nfs 264813 0 - Live 0xfa842000
lockd 64849 2 nfsd,nfs, Live 0xfa7cd000
nfs_acl 2245 2 nfsd,nfs, Live 0xfa7ad000
auth_rpcgss 33735 2 nfsd,nfs, Live 0xfa799000
tda827x 9240 1 - Live 0xf9d2c000
snd_hda_intel 21941 0 - Live 0xf9d12000
tda10023 5956 1 - Live 0xf9cfd000
sunrpc 193085 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss, Live 0xf9cb5000
snd_hda_codec 74201 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel, Live 0xf9c55000
ppdev 5259 0 - Live 0xf9bd1000
nvidia 9961216 28 - Live 0xf9007000 (P)
video 17375 0 - Live 0xf85a4000
output 1871 1 video, Live 0xf8593000
asus_atk0110 9017 0 - Live 0xf8587000
snd_hwdep 5412 1 snd_hda_codec, Live 0xf857a000
snd_pcm 70662 2 snd_hda_intel,snd_hda_codec, Live 0xf8558000
snd_timer 19098 1 snd_pcm, Live 0xf8532000
parport_pc 25962 1 - Live 0xf8519000
lp 7028 0 - Live 0xf8503000
agpgart 31724 1 nvidia, Live 0xf84e9000
budget_ci 19230 0 - Live 0xf84cf000
snd 54148 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer, Live 0xf84ad000
parport 32635 3 ppdev,parport_pc,lp, Live 0xf8487000
ir_common 46300 1 budget_ci, Live 0xf8462000
budget_core 7682 1 budget_ci, Live 0xf844a000
dvb_core 86042 2 budget_ci,budget_core, Live 0xf8424000
saa7146 14905 2 budget_ci,budget_core, Live 0xf83fa000
ttpci_eeprom 1767 1 budget_core, Live 0xf83eb000
ir_core 6142 2 budget_ci,ir_common, Live 0xf83e0000
lirc_imon 22905 0 - Live 0xf83c2000
lirc_dev 8884 1 lirc_imon, Live 0xf83ae000
soundcore 6620 1 snd, Live 0xf839f000
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm, Live 0xf8392000
shpchp 28820 0 - Live 0xf837e000
i2c_nforce2 5199 0 - Live 0xf8369000
usbhid 36110 0 - Live 0xf8107000
hid 67032 1 usbhid, Live 0xf80c3000
forcedeth 49556 0 - Live 0xf8094000
pata_amd 8766 0 - Live 0xf8025000
ahci 32200 2 - Live 0xf8045000
Alles anzeigen
und ein manuelles entladen der Module endet folgendermaßen:
***@VDR:~$ sudo stop vdr
vdr stop/waiting
***@VDR:~$ modprobe -r tda10023
FATAL: Module tda10023 is in use.
***@VDR:~$
Ist es irgendwie möglich die Module zu entladen wenn ich den VDR in den S3 schicke?
Die Idee war jetzt nicht, dass du hier wieder alles postest, sondern die Informationen selbst verwendest.
Zitat
Sieh mit lsmod nach ob das modul durch ein anderes benutzt wird und entferne es vorher.
Gerald
Bei allem Respekt - ich hab keine Peilung von Linux und ich will eigentlich auch gar nicht so viel mit der Konsole zu tun haben. Ich versuche yaVDR zu nutzen um TV zu sehen und Aufzunehmen - nichts weiter.
Ich versuche mit Hilfe des Forums das Ding produktiv zum laufen zu bekommen, und will es dann einfach in Ruhe laufen lassen - ich will nicht Monate lang mit dem konfigurieren verbringen und nicht vorher Linux studieren müssen.
So, dein Tipp war Hilfreich.
***@VDR:~$ sudo stop vdr
vdr stop/waiting
***@VDR:~$ sudo modprobe -r budget_ci
***@VDR:~$ sudo modprobe -r budget_core
***@VDR:~$ sudo modprobe -r dvb_core
***@VDR:~$ sudo modprobe -r tda10023
***@VDR:~$ lsmod
Module Size Used by
autofs4 22715 2
snd_hda_codec_nvhdmi 3840 1
snd_hda_codec_realtek 203310 1
nfsd 238967 13
exportfs 3437 1 nfsd
nfs 264813 0
lockd 64849 2 nfsd,nfs
nfs_acl 2245 2 nfsd,nfs
auth_rpcgss 33735 2 nfsd,nfs
tda827x 9240 0
snd_hda_intel 21941 0
sunrpc 193085 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
snd_hda_codec 74201 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel
ppdev 5259 0
nvidia 9961216 28
video 17375 0
output 1871 1 video
asus_atk0110 9017 0
snd_hwdep 5412 1 snd_hda_codec
snd_pcm 70662 2 snd_hda_intel,snd_hda_codec
snd_timer 19098 1 snd_pcm
parport_pc 25962 1
lp 7028 0
agpgart 31724 1 nvidia
snd 54148 6 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
parport 32635 3 ppdev,parport_pc,lp
lirc_imon 22905 0
lirc_dev 8884 1 lirc_imon
soundcore 6620 1 snd
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
shpchp 28820 0
i2c_nforce2 5199 0
usbhid 36110 0
hid 67032 1 usbhid
forcedeth 49556 0
pata_amd 8766 0
ahci 32200 2
***@VDR:~$ sudo modprobe tda10023
***@VDR:~$ sudo modprobe dvb_core
***@VDR:~$ sudo modprobe budget_core
***@VDR:~$ sudo modprobe budget_ci
***@VDR:~$ sudo start vdr
vdr start/running, process 2429
Alles anzeigen
So funktioniert alles erfolgreich! Wie kann ich das automatisieren?
ZitatOriginal von HTPC2010
Ich versuche mit Hilfe des Forums das Ding produktiv zum laufen zu bekommen, und will es dann einfach in Ruhe laufen lassen - ich will nicht Monate lang mit dem konfigurieren verbringen und nicht vorher Linux studieren müssen.
Monate wird es nur dauern, wenn du nach jeder Änderung hier postest und auf Antwort wartest, anstatt es selbst mal zu probieren. Die Meisten die Ahnung von dem Thema haben, haben häufig noch mehr zu tun als jeden Anfänger an die Hand zu nehmen. yaVDR wird von uns in unserer Freizeit entwickelt und supportet. Das solltest du nicht außer Acht lassen. Hast du dich mal gefragt wie spannend es für uns ist, immer wieder die selben Anfängerfragen zu beantworten? Deshalb versuche ich dir einen Weg aufzuzeigen, wie du es selbst lösen kannst, in der Hoffnung, dass der Eine oder Andere das liest und sein Problem ebenfalls selber in den Griff bekommt.
Gerald
ZitatOriginal von HTPC2010
So, dein Tipp war Hilfreich.Code***@VDR:~$ sudo stop vdr vdr stop/waiting ***@VDR:~$ sudo modprobe -r budget_ci ***@VDR:~$ sudo modprobe -r budget_core ***@VDR:~$ sudo modprobe -r dvb_core ***@VDR:~$ sudo modprobe -r tda10023
So funktioniert alles erfolgreich! Wie kann ich das automatisieren?
Na genau die Module in dieser Reihenfolge ins force-reload-File.
Gerald
ZitatOriginal von HTPC2010
Bei allem Respekt - ich hab keine Peilung von Linux und ich will eigentlich auch gar nicht so viel mit der Konsole zu tun haben.
Nachdem du es nun selbst geschafft hast, ohne dass ich es dir vorgekaut habe, kannst du nicht mehr behaupten keine Peilung von Linux zu haben. Außerdem musst du zugeben, dass es ein Lustgewinn ist ein Problem selbst gelöst zu haben.
Gerald
ZitatOriginal von gda
Nachdem du es nun selbst geschafft hast, ohne dass ich es dir vorgekaut habe, kannst du nicht mehr behaupten keine Peilung von Linux zu haben. Außerdem musst du zugeben, dass es ein Lustgewinn ist ein Problem selbst gelöst zu haben.
Gerald
Dank dir
Es funktioniert übrigens!
Das Problem was ich habe, ist das ich nicht mal die Dateistruktur & Zusammenhänge zwischen den Dateien kenne. Naja, wie auch immer - hoffentlich kommen nicht mehr so viele Probleme!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!