Moin,
eigentlich ein ganz einfacher Vorgang (dachte ich): Meine Netzwerkkarte unterstützte kein Wake On LAN. War außerdem nur Fast Ethernet, da ich mittlerweile einen Gigabit Switch habe, war das die Gelegenheit für ein Austausch.
Leider tut die Karte nicht unter yaVDR 0.2. Google brachte nur uralte Posts, also sollte die Karte prinzipiel tun. Ich hab mal ein Life Knoppix von der CD gebootet, alles wunder bar. Das war ein 2.6.19 Kernel. DHCP konfigurierte alles automatisch, Internet lief auf anhieb.
Jetzt wieder zu meiner yaVDR Installation:
ZitatDie Karte wird erkannt (lspci):
02:0a.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
Zitat
Als Treiber fühlt sich skge zuständig (dmesg)
[ 1.699838] skge 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.699902] skge 1.13 addr 0xfeafc000 irq 22 chip Yukon-Lite rev 9
[ 1.701400] skge eth0: addr 1c:af:f7:70:ee:87
ZitatAlles anzeigender Vollständigkeit halber auch noch das Ergebnis von lsmod:
Module Size Used by
nfsd 238935 13
exportfs 3437 1 nfsd
nfs 264702 0
lockd 64849 2 nfsd,nfs
nfs_acl 2245 2 nfsd,nfs
auth_rpcgss 33735 2 nfsd,nfs
snd_emu10k1 130493 0
snd_rawmidi 19077 1 snd_emu10k1
snd_ac97_codec 100600 1 snd_emu10k1
ac97_bus 1002 1 snd_ac97_codec
snd_pcm 71582 2 snd_emu10k1,snd_ac97_codec
snd_seq_device 5988 2 snd_emu10k1,snd_rawmidi
snd_timer 18646 2 snd_emu10k1,snd_pcm
mantis 36648 0
lnbp21 1834 1 mantis
mb86a16 19633 1 mantis
snd_page_alloc 7076 2 snd_emu10k1,snd_pcm
snd_util_mem 3106 1 snd_emu10k1
ir_common 46300 1 mantis
stb6100 6528 1 mantis
snd_hwdep 5604 1 snd_emu10k1
tda10021 5724 1 mantis
tda10023 5956 1 mantis
stb0899 33469 1 mantis
stv0299 8722 1 mantis
dell_wmi 1793 0
emu10k1_gp 1492 0
snd 56271 7 snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
dvb_core 86074 2 mantis,stv0299
ppdev 5259 0
psmouse 63245 0
sunrpc 193181 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
dcdbas 5422 0
joydev 8708 0
ir_core 6142 2 mantis,ir_common
soundcore 6620 1 snd
gameport 9089 2 emu10k1_gp
intel_agp 24177 1
serio_raw 3978 0
parport_pc 25962 1
nvidia 9932176 24
agpgart 31724 2 intel_agp,nvidia
shpchp 28820 0
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
skge 35683 0
floppy 53016 0
usbhid 36110 0
hid 67032 1 usbhid
ifconfig liefert nur was zum loop back IF, und ein Versuch eth0 von Hand zu starten schlägt fehl:
ZitatAlles anzeigen
Internet Systems Consortium DHCP Client V3.1.3
Copyright 2004-2009 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
eth0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
und ein failed to bring up eth0.
Hat jemand eine Idee?
Jan