Folge den Links, Luke:
Alle drei von mir ursprünglich genannten Ansätze gehen genau in die richtige Richtung, und hier sollten einige auf diese Entwicklungen aufsetzen können, um die unter http://vdr-portal.de/board/thr…?postid=807919#post807919 genannten Fertiglösungen vielleicht für ein Zehntel des Preises zu realisieren:
http://home.comcast.net/~foxharp/avrlirc/
ZitatI've been playing with Atmel AVR microcontrollers recently, and at some point I realized that I had the solution to my remote-control problems in hand. I did some googling, and sure enough, I found some code (written by Karl Bongers) that would convert an IR receiver's timings into plain RS232 data, which could simply be read normally via a serial port. From there the data could be fed (somehow... I hadn't figured that part out, yet) to lircd, all without requiring a kernel driver. The restrictions on having a local physical serial port went away, as well, since the data is just a serial stream of bytes.
http://www.huitsing.com/irftdi/
ZitatThis page documents my hobby project of building a home-brew IR receiver/transmitter based on the FTDI chipset.
During the past couple of years I've been using several IR receivers and transmitters that where based on RS232 connections. Unfortunately my newest boxes don't have any legacy RS232 connections anymore. Googling around for a cheap USB based solution didn't give me the results I hoped for.
So I came up with the idea to build one myself.
[...( wir reden von "so einfach": ) ... ]
[Blockierte Grafik: http://www.huitsing.nl/irftdi/hw_ftdi.geschaald.jpg] [Blockierte Grafik: http://www.huitsing.nl/irftdi/receiver_with_mm232r.png]
...und diese Bausteine wurden sogar auch schon hier von einigen Forengöttern bebastelt! http://vdrportal.de/board/thread.php?threadid=46794&page=11#post450005
Mehr Informationen zu den MM232R-Mustern gibt es unter http://p5676.typo3server.info/ftdi-r.0.html, und evtl. sollten sie sich nach ein paar Testkäufen in der Bucht sogar noch günstiger aus geeigneten USB-Handydatenkabeln gewinnen lassen.
ZitatBestimmte Puls und Space Bereiche zu erkennen Funktioniert jetzt.
Als nächstes sollten wir die RAW Daten aus einer lirc.conf verarbeiten.