kein bild ;( need help

Hallo,
bin neuling habe zum ersten mal vdr sys installiert habe aber paar probleme,
ich habe easyvdr 0.5rc2
wenn ich vdr starte steht da immer

arg: /etc/vdr/plugins/dvdswitch/dvdlink
sources: filesource /media has no include set
sources: filesource /media/dvd has no include set
sources: filesource /media/usb has no include set
sources: filesource /media/filme1 has no include set
sources: filesource /media/filme2 has no include set
sources: filesource /media/convert/dvd has no include set
sources: filesource /media/convert/mpg has no include set
sources: filesource /media/convert/divx has no include set
sources: filesource /media/convert/svcd has no include set
sources: filesource /media/convert/dvd has no include set
sources: filesource /etc/vdr/plugins/DVD-VCD has no include set
music: ID=2
Music: CHANNEL=2
music: BARS=32
usw

ich weiss nicht was das zu bedeuten hat vllt kann mir eienr helfen... dazu kommt das ich kein bild am tv bekomme obwohl ichs an der ff tv karte angeschlossen habe ;/

kann sein das vllt treiber für die tv karte fehlt ?

System:
MB: Gigabyte GA-MA69GM-S2H (athlon x2 4400)
Grafik onboard
2 gb ram
dvd brenner sata
500 gb sata hdd

Technotrend Premium S-2300 "modded" 2.3 rev.
Technotrend Budget S-1500

sei es easy vdr oder andere vdrs ich krieg nix zum laufen :<

vielen dank

danke erstmal,

hab /usr/bin/easyvdr/easyvdr-config-ff.sh
ausgeführt wie im andern thread beschrieben nun steht da aber es wurde keine ff karte gefunden und daher auch keine änderungen übernommen

karte steckt aber im steckplatzt fest !

nun steht aber immer noch der gleiche text wie oben un darunter

vdr: no primary device found -using first device !

und der text wechselt sich imemr ab

die rc1 version krieg ich erst garnicht zu laufen, rebootet immer bei der installation

rc2 erkennt er einfach keine ff karte, liegts vllt daran das es eine neuere tt 2300 ist ?? (rev 2.3)

vdr: no primary device found -using first device !

hmm komisch jetzt findet er die ff karte immer noch nicht :<

hu, erstmal danke

hab nun den befehl /usr/bin/easyvdr/easyvdr-config-ff.sh --force eingegeben aber bild kommt trotzdem keins, weil wenn ich ohne --force eingebe steht da immer noch keine ff gefunden.. :<

START_X="no" hab ich auch nur 1 mal in der datei stehen

hier die dmesg ausgabe: vllt hilfts ja

[ 0.000000] Linux version 2.6.22.15 (root@easyVDR) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #16 SMP PREEMPT Mon Mar 3 10:23:58 CET 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006fee0000 (usable)
[ 0.000000] BIOS-e820: 000000006fee0000 - 000000006fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006fee3000 - 000000006fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 894MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5050
[ 0.000000] Entering add_active_range(0, 0, 458464) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 458464
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 458464
[ 0.000000] On node 0 totalpages: 458464
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1789 pages used for memmap
[ 0.000000] HighMem zone: 227299 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000F6A10, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 6FEE3000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: FACP 6FEE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: DSDT 6FEE30C0, 48EF (r1 GBT GBTUACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 6FEE0000, 0040
[ 0.000000] ACPI: SSDT 6FEE7A80, 0248 (r1 PTLTD POWERNOW 1 LTP 1)
[ 0.000000] ACPI: HPET 6FEE7D00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98)
[ 0.000000] ACPI: MCFG 6FEE7D40, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ACPI: APIC 6FEE79C0, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101)
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:11 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 70000000 (gap: 6ff00000:70100000)
[ 0.000000] Built 1 zonelists. Total pages: 454883
[ 0.000000] Kernel command line: root=/dev/sda3 ro pci=routeirq vga=788
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2305.317 MHz processor.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1809412k/1833856k available (5331k kernel code, 23204k reserved, 1691k data, 388k init, 916352k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.000000] .init : 0xc07e3000 - 0xc0844000 ( 388 kB)
[ 0.000000] .data : 0xc0634fe1 - 0xc07dbe9c (1691 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0634fe1 (5331 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 0.000000] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 0.061000] Calibrating delay using timer specific routine.. 4686.91 BogoMIPS (lpj=2343456)
[ 0.061000] Mount-cache hash table entries: 512
[ 0.061000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
[ 0.061000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.061000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.061000] CPU 0(2) -> Core 0
[ 0.061000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
[ 0.061000] Intel machine check architecture supported.
[ 0.061000] Intel machine check reporting enabled on CPU#0.
[ 0.061000] Compat vDSO mapped to ffffe000.
[ 0.061000] Checking 'hlt' instruction... OK.
[ 0.065000] SMP alternatives: switching to UP code
[ 0.065000] ACPI: Core revision 20070126
[ 0.068000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
[ 0.068000] SMP alternatives: switching to SMP code
[ 0.068000] Booting processor 1/1 eip 3000
[ 0.079000] Initializing CPU#1
[ 0.140000] Calibrating delay using timer specific routine.. 4610.44 BogoMIPS (lpj=2305224)
[ 0.140000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f
[ 0.140000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.140000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.140000] CPU 1(2) -> Core 1
[ 0.140000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f
[ 0.140000] Intel machine check architecture supported.
[ 0.140000] Intel machine check reporting enabled on CPU#1.
[ 0.140000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
[ 0.140000] Total of 2 processors activated (9297.36 BogoMIPS).
[ 0.140000] ENABLING IO-APIC IRQs
[ 0.140000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.150000] Brought up 2 CPUs
[ 0.172000] migration_cost=1000
[ 0.172000] Booting paravirtualized kernel on bare hardware
[ 0.172000] NET: Registered protocol family 16
[ 0.172000] No dock devices found.
[ 0.172000] ACPI: bus type pci registered
[ 0.172000] PCI: Using MMCONFIG
[ 0.172000] PCI: No mmconfig possible on device 00:18
[ 0.173000] Setting up standard PCI resources
[ 0.179000] ACPI: Interpreter enabled
[ 0.179000] ACPI: (supports S0 S1 S4 S5)
[ 0.179000] ACPI: Using IOAPIC for interrupt routing
[ 0.183000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.183000] PCI: Probing PCI hardware (bus 00)
[ 0.184000] PCI: Transparent bridge - 0000:00:14.4
[ 0.184000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.184000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.184000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.198000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.198000] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.198000] pnp: PnP ACPI init
[ 0.198000] ACPI: bus type pnp registered
[ 0.201000] pnp: PnP ACPI: found 14 devices
[ 0.201000] ACPI: ACPI bus type pnp unregistered
[ 0.201000] SCSI subsystem initialized
[ 0.201000] libata version 2.21 loaded.
[ 0.201000] usbcore: registered new interface driver usbfs
[ 0.201000] usbcore: registered new interface driver hub
[ 0.201000] usbcore: registered new device driver usb
[ 0.201000] PCI: Using ACPI for IRQ routing
[ 0.201000] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[ 0.201000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16
[ 0.201000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 0.201000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 0.201000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 0.201000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18
[ 0.201000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19
[ 0.201000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20
[ 0.201000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
[ 0.201000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 0.201000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 0.201000] ACPI: PCI Interrupt 0000:01:05.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 0.201000] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 22 (level, low) -> IRQ 16
[ 0.201000] ACPI: PCI Interrupt 0000:02:0f.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 0.201000] pnp: 00:02: ioport range 0x4100-0x411f has been reserved
[ 0.201000] pnp: 00:02: ioport range 0x228-0x22f has been reserved
[ 0.201000] pnp: 00:02: ioport range 0x40b-0x40b has been reserved
[ 0.201000] pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 0.201000] pnp: 00:02: ioport range 0xc00-0xc01 has been reserved
[ 0.201000] pnp: 00:02: ioport range 0xc14-0xc14 has been reserved
[ 0.201000] pnp: 00:02: ioport range 0xc50-0xc52 has been reserved
[ 0.201000] pnp: 00:02: ioport range 0xc6c-0xc6d has been reserved
[ 0.201000] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.201000] pnp: 00:0d: iomem range 0xcd600-0xcffff has been reserved
[ 0.201000] pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.201000] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.201000] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.202000] Time: hpet clocksource has been installed.
[ 0.202000] Switched to high resolution mode on CPU 0
[ 0.202000] Switched to high resolution mode on CPU 1
[ 0.231000] PCI: Bridge: 0000:00:01.0
[ 0.231000] IO window: e000-efff
[ 0.231000] MEM window: fde00000-fdffffff
[ 0.231000] PREFETCH window: d0000000-dfffffff
[ 0.231000] PCI: Bridge: 0000:00:14.4
[ 0.231000] IO window: d000-dfff
[ 0.231000] MEM window: fdd00000-fddfffff
[ 0.231000] PREFETCH window: fdc00000-fdcfffff
[ 0.231000] NET: Registered protocol family 2
[ 0.242000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.242000] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.243000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.243000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.243000] TCP reno registered
[ 0.247000] microcode: CPU0 not a capable Intel processor
[ 0.247000] microcode: CPU1 not a capable Intel processor
[ 0.247000] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[ 0.247000] highmem bounce pool size: 64 pages
[ 0.247000] Total HugeTLB memory allocated, 0
[ 0.249000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.249000] NTFS driver 2.1.28 [Flags: R/W].
[ 0.249000] fuse init (API version 7.8)
[ 0.250000] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.251000] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 0.252000] SGI XFS Quota Management subsystem
[ 0.252000] io scheduler noop registered
[ 0.252000] io scheduler anticipatory registered
[ 0.252000] io scheduler deadline registered
[ 0.252000] io scheduler cfq registered (default)
[ 0.252000] PCI: MSI quirk detected. MSI deactivated.
[ 0.367000] Boot video device is 0000:01:05.0
[ 0.367000] vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 3750k, total 16384k
[ 0.367000] vesafb: mode is 800x600x16, linelength=1600, pages=16
[ 0.367000] vesafb: protected mode interface info at c000:a048
[ 0.367000] vesafb: pmi: set display start = c00ca0d2, set palette = c00ca190
[ 0.367000] vesafb: scrolling: redraw
[ 0.367000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.394000] Console: switching to colour frame buffer device 100x37
[ 0.418000] fb0: VESA VGA frame buffer device
[ 0.419000] input: Power Button (FF) as /class/input/input0
[ 0.419000] ACPI: Power Button (FF) [PWRF]
[ 0.419000] input: Power Button (CM) as /class/input/input1
[ 0.420000] ACPI: Power Button (CM) [PWRB]
[ 0.420000] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 0.432000] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 0.457000] isapnp: Scanning for PnP cards...
[ 0.782000] isapnp: No Plug & Play device found
[ 0.812000] Real Time Clock Driver v1.12ac
[ 0.823000] Non-volatile memory driver v1.2
[ 0.835000] nsc_gpio initializing
[ 0.835000] Floppy drive(s): fd0 is 1.44M
[ 0.861000] FDC 0 is a post-1991 82077
[ 0.874000] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 0.886000] loop: module loaded
[ 0.897000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 0.909000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 0.921000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1
[ 0.933000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
[ 0.946000] SB600_PATA: chipset revision 0
[ 0.958000] SB600_PATA: not 100% native mode: will probe irqs later
[ 0.971000] ide0: BM-DMA at 0xf900-0xf907, BIOS settings: hda:DMA, hdb:pio
[ 0.984000] Probing IDE interface ide0...
[ 1.656000] hda: TOSHIBA DVD-ROM SD-M1912, ATAPI CD/DVD-ROM drive
[ 1.975000] hda: selected mode 0x42
[ 1.975000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.988000] Probing IDE interface ide1...
[ 2.501000] hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 2.514000] Uniform CD-ROM driver Revision: 3.20
[ 2.528000] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[ 2.540000] Detecting Adaptec I2O RAID controllers...
[ 2.553000] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 2.566000] scsi: <fdomain> Detection failed (no card)
[ 2.605000] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 2.618000] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 2.631000] megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
[ 2.644000] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 2.657000] GDT-HA: Found 0 PCI Storage RAID Controllers
[ 2.670000] 3ware Storage Controller device driver for Linux v1.26.02.002.
[ 2.683000] 3ware 9000 Storage Controller device driver for Linux v2.26.02.009.
[ 2.695000] RocketRAID 3xxx SATA Controller driver v1.0 (060426)
[ 2.708000] stex: Promise SuperTrak EX Driver version: 3.6.0000.1
[ 2.720000] ahci 0000:00:12.0: version 2.2
[ 2.720000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16
[ 2.733000] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.747000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 3.760000] ahci 0000:00:12.0: flags: ncq ilck pm led clo pmp pio slum part
[ 3.773000] scsi0 : ahci
[ 3.786000] scsi1 : ahci
[ 3.799000] scsi2 : ahci
[ 3.811000] scsi3 : ahci
[ 3.823000] ata1: SATA max UDMA/133 cmd 0xf8cf8100 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 3.836000] ata2: SATA max UDMA/133 cmd 0xf8cf8180 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 3.848000] ata3: SATA max UDMA/133 cmd 0xf8cf8200 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 3.859000] ata4: SATA max UDMA/133 cmd 0xf8cf8280 ctl 0x00000000 bmdma 0x00000000 irq 16
[ 4.173000] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.487000] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.955000] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.986000] ata3.00: Host Protected Area detected:
[ 4.986000] current size: 976771055 sectors
[ 4.986000] native size: 976773168 sectors
[ 5.016000] ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 5.026000] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.039000] ata3.00: Host Protected Area detected:
[ 5.039000] current size: 976771055 sectors
[ 5.039000] native size: 976773168 sectors
[ 5.068000] ata3.00: configured for UDMA/133
[ 5.381000] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.390000] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
[ 5.400000] sd 2:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
[ 5.410000] sd 2:0:0:0: [sda] Write Protect is off
[ 5.420000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.420000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.439000] sd 2:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
[ 5.449000] sd 2:0:0:0: [sda] Write Protect is off
[ 5.459000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.459000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.478000] sda: sda1 sda2 sda3 sda4
[ 5.519000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.529000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 5.540000] I2O subsystem v1.325
[ 5.550000] i2o: max drivers = 8
[ 5.560000] I2O Configuration OSM v1.323
[ 5.570000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20
[ 5.580000] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 5.591000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 5.602000] ehci_hcd 0000:00:13.5: debug port 1
[ 5.613000] ehci_hcd 0000:00:13.5: irq 20, io mem 0xfe029000
[ 5.630000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.641000] usb usb1: configuration #1 chosen from 1 choice
[ 5.652000] hub 1-0:1.0: USB hub found
[ 5.663000] hub 1-0:1.0: 10 ports detected
[ 5.774000] 116x: driver isp116x-hcd, 03 Nov 2005
[ 5.784000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.784000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 5.796000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 5.807000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 5.818000] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfe02e000
[ 5.884000] usb usb2: configuration #1 chosen from 1 choice
[ 5.895000] hub 2-0:1.0: USB hub found
[ 5.906000] hub 2-0:1.0: 2 ports detected
[ 6.018000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 6.029000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 6.040000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 6.051000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02d000
[ 6.116000] usb usb3: configuration #1 chosen from 1 choice
[ 6.126000] hub 3-0:1.0: USB hub found
[ 6.137000] hub 3-0:1.0: 2 ports detected
[ 6.248000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 6.258000] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 6.268000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 6.279000] ohci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
[ 6.344000] usb usb4: configuration #1 chosen from 1 choice
[ 6.354000] hub 4-0:1.0: USB hub found
[ 6.365000] hub 4-0:1.0: 2 ports detected
[ 6.476000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18
[ 6.486000] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 6.497000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 6.508000] ohci_hcd 0000:00:13.3: irq 18, io mem 0xfe02b000
[ 6.573000] usb usb5: configuration #1 chosen from 1 choice
[ 6.583000] hub 5-0:1.0: USB hub found
[ 6.594000] hub 5-0:1.0: 2 ports detected
[ 6.705000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19
[ 6.715000] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 6.726000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 6.737000] ohci_hcd 0000:00:13.4: irq 19, io mem 0xfe02a000
[ 6.803000] usb usb6: configuration #1 chosen from 1 choice
[ 6.813000] hub 6-0:1.0: USB hub found
[ 6.824000] hub 6-0:1.0: 2 ports detected
[ 6.935000] USB Universal Host Controller Interface driver v3.0
[ 6.945000] sl811: driver sl811-hcd, 19 May 2005
[ 6.956000] Initializing USB Mass Storage driver...
[ 6.966000] usbcore: registered new interface driver usb-storage
[ 6.977000] USB Mass Storage support registered.
[ 6.987000] usbcore: registered new interface driver libusual
[ 6.998000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 7.009000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 7.022000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.033000] mice: PS/2 mouse device common for all mice
[ 7.068000] input: AT Translated Set 2 keyboard as /class/input/input2
[ 7.079000] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.090000] TCP cubic registered
[ 7.101000] NET: Registered protocol family 1
[ 7.112000] NET: Registered protocol family 17
[ 7.122000] Starting balanced_irq
[ 7.133000] Using IPI No-Shortcut mode
[ 7.154000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.165000] EXT3-fs: write access will be enabled during recovery.
[ 7.722000] kjournald starting. Commit interval 5 seconds
[ 7.733000] EXT3-fs: recovery complete.
[ 7.745000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.756000] VFS: Mounted root (ext3 filesystem) readonly.
[ 7.767000] Freeing unused kernel memory: 388k freed
[ 9.506000] Linux agpgart interface v0.102 (c) Dave Jones
[ 9.677000] input: PC Speaker as /class/input/input3
[ 9.731000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 9.731000] ACPI: PCI Interrupt 0000:02:0f.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 9.731000] eth0: RTL8169sc/8110sc at 0xf90d6000, 00:1d:7d:d1:81:6e, IRQ 21
[ 9.745000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 9.748000] ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 22 (level, low) -> IRQ 16
[ 9.788000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 9.788000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 9.799000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fddff000-fddff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 9.809000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
[ 9.818000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[ 9.843000] ACPI: PCI Interrupt 0000:01:05.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 11.058000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001d7d0000f30aca]
[ 11.357000] hda: selected mode 0x42
[ 11.406000] Adding 265032k swap on /dev/sda1. Priority:-1 extents:1 across:265032k
[ 14.392000] EXT3 FS on sda3, internal journal
[ 14.959000] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
[ 15.178000] r8169: eth0: link up
[ 15.358000] kjournald starting. Commit interval 5 seconds
[ 15.366000] EXT3 FS on sda4, internal journal
[ 15.366000] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.454000] usbcore: registered new interface driver hiddev
[ 15.454000] usbcore: registered new interface driver usbhid
[ 15.454000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 15.550000] usbcore: registered new interface driver kbtab
[ 15.550000] drivers/input/tablet/kbtab.c: v0.0.2:USB KB Gear JamStudio Tablet driver
[ 18.234000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 18.478000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.487000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 18.510000] lirc_dev: IR Remote Control driver registered, at major 61
[ 18.510000] lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
[ 19.011000] lirc_serial: auto-detected active low receiver
[ 19.011000] lirc_dev: lirc_register_plugin: sample_rate: 0

ps: hab nur die ff- tt 2300 rev2.3 modded karte drinne, die andere tv karte (budget) ist erstmal draussen

die karte hatte schonmal vorher geklappt hatte ja sogar das menü aufm tv, aber jetzt kommt da eifnach nix mehr, hab die karte mal in mein xp rechner eingebaut da wird sie auch nimmer erkannt, wird wohl geschossen sein... ;/

würd ich ja gerne posten wenn ich wüsste wo die log datei ist ;/