ZitatOriginal von defire
Habs mit einer Datei mit 1844 MB auch schon versucht hat mit der gleichen Meldung abgebrochen
Versuch mal vdrsync.pl direkt aufzurufen:
vdrsync.pl -d -basename test -mkiso /video0/.....
Tom.
ZitatOriginal von defire
Habs mit einer Datei mit 1844 MB auch schon versucht hat mit der gleichen Meldung abgebrochen
Versuch mal vdrsync.pl direkt aufzurufen:
vdrsync.pl -d -basename test -mkiso /video0/.....
Tom.
Hab wieder Fehler:
linvdr:~# vdrsync.pl -d -basename test -mkiso /video0/%Der_Buschpilot/2003-10-18
.23.55.50.50.rec
Got parameter -basename
Got parameter -mkiso
Got parameter /video0/%Der_Buschpilot/2003-10-18.23.55.50.50.rec
got a directory on the command line
trying to open /video0/%Der_Buschpilot/2003-10-18.23.55.50.50.rec
Output files will be stored in ./
Found 0 to ignore
Lots of debug stuff will be printed
Initialising and analysing the streams....
trying to open /video0/%Der_Buschpilot/2003-10-18.23.55.50.50.rec/001.vdr
10 Mbytes of 0 readsending frame number 1 for analysis of stream e7
we got the decimal code 231 for e7
we got the stream 231 (e7), checking Video
Matched: ³-@3$# at 0 bitview of the header
0010110100000010010000000011001100100100100111110010001110000010
we got for fps: 0011
sending frame number 9 for analysis of stream c0
we got the decimal code 192 for c0
we got the stream 192 (c0), checking Audio
streamtype is: MPEG1_Layer_2
bitrate is 192000
freq is 48000
copyright is 0
framelength in byte is 576
in sec: 0.024
MPEG1_Layer_2 for stream c0
video for stream e7
trying to open /video0/%Der_Buschpilot/2003-10-18.23.55.50.50.rec/001.vdr
10 Mbytes of 2648 readYes, it did start at 0
First packet ts for stream c0 in buffer 3623369540 last:3623808022
In stream c0: new start 3623410422
INSERT FRAMES:wrote additional 0 frames to close -158 ticks, leaving -158
IN SYNC AUDIO START (c0): diff is now: -158
CHUNKSTART: dropped 18 frames at the beginning of c0, start is now 3623410580 ma
tching 3623410422 leaving -158
2648 Mbytes of 2648 readshould do the final flush for stream e7
Flushing Video Buffer, 210474 bytes left
The last GOP contains 12 pics
FINAL: 3623410422::4136367222::142500
Final flush for stream c0
should do the final flush for stream c0
INSERT FRAMES:wrote additional 19 frames to close 40882 ticks, leaving -158
found key aspect_ratio
found subkey 16:9 with value 1187
found key bitrate_value
found subkey 15000000 with value 1187
found key vertical_size
found subkey 576 with value 1187
found key fps
found subkey 25 with value 1187
found key horizontal_size
found subkey 720 with value 1187
Property aspect_ratio is 16:9
Property bitrate_value is 15000000
Property vertical_size is 576
Property horizontal_size is 720
Property fps is 25
MPEG1_Layer_2 for stream c0
video for stream e7
Got 2 files back
Saving File as test.mpg
-master-dvd was specified
mkfifo ./remuxfifo
the attempt to create FIFO returnd 0
Creating DVD structure using dvdauthor...
mplexing file to fifo
should execute nice -19 /usr/bin/tcmplex -i ".//test.mpv" -p ".//test0.mpa" -m d
and put it to the fifo
now the command is nice -19 /usr/bin/tcmplex -i ".//test.mpv" -p ".//test0.mpa"
-m d -o ./remuxfifo
Multiplexing streams for dvdauthor...
nice -19 /usr/bin/tcmplex -i ".//test.mpv" -p ".//test0.mpa" -m d -o ./remuxfif
o
/usr/bin/dvdauthor -v 16:9 -c 0:00,5:00,10:00,15:00,20:00,25:00,30:00,35:00,40:
00,45:00,50:00,55:00,60:00,65:00,70:00,75:00,80:00,85:00,90:00,95:00 -o ".//test
" .//remuxfifo
Error while running '/usr/bin/dvdauthor -v 16:9 -c 0:00,5:00,10:00,15:00,20:00,25:00,30:00,35:00,40:00,45:00,50:00,55:00,60:00,65:00,70:00,75:00,80:00,85:00,90:00,95:00 -o ".//test" .//remuxfifo > /dev/null 2> /dev/null'
Error while running 'nice -19 /usr/bin/tcmplex -i ".//test.mpv" -p ".//test0.mpa" -m d -o ./remuxfifo > /dev/null 2> /dev/null'
Creating table of content...
finished mplexing
/usr/bin/dvdauthor -T -o ".//test"
Error while running '/usr/bin/dvdauthor -T -o ".//test" > /dev/null 2> /dev/null'
Creating ISO Image...
mkisofs -dvd-video -o ".//test.iso" ".//test"
Error while running 'mkisofs -dvd-video -o ".//test.iso" ".//test" > /dev/null 2> /dev/null'
***********************************************************
vdrsync finished
***********************************************************
now you can burn the Image to a DVD-R(W) using the command:
dvdrecord dev=1,0,0 -v -dao ".//test.iso"
NOTE: Of course you have to adjust the dev=N,N,N parameter to match your device settings
Housekeeping...
Deleting temp files
.//test.mpv
.//test0.mpa
Deleting DVD Files with: rm -r "./test"
rm -r "./test"
Thomas
ZitatAlles anzeigenOriginal von defire
Hab wieder Fehler:
linvdr:~# vdrsync.pl -d -basename test -mkiso /video0/%Der_Buschpilot/2003-10-18
.23.55.50.50.rec
trying to open /video0/%Der_Buschpilot/2003-10-18.23.55.50.50.rec/001.vdr
10 Mbytes of 2648 readYes, it did start at 0
Wie sieht das mit einer Aufnahme aus die unter 2G ist? Probier mal irgendeine Augnahme <1,5G aus.
Hatte gerade nur eine Aufnahme mit rund 1G zur Hand, die funktionierte...
Ansonsten bitte einmal:
strace -f -F -o vdrsync.dump vdrsync.pl -d -basename test -mkiso /video0/%Der_Buschpilot/2003-10-18.23.55.50.50.rec
laufen lassen, das ergebniss Packen und mir per Mail zuschicken.
Tom.
Falls das noch was bringt!!???
linvdr:/usr/bin# convert.pl -q -d
/usr/bin/nice -n 19 /usr/bin/vdrsync.pl -basename "Badesalz_-_Hammersbald#3F" -o "/pub/export" -mkiso "/video0/Badesalz_-_Hammersbald#3F/2003-10-13.23.18.99.99.rec"
Initialising and analysing the streams....
2102 Mbytes of 2102 read
Creating DVD structure using dvdauthor...
Multiplexing streams for dvdauthor...
Creating table of content...
Creating ISO Image...
***********************************************************
vdrsync finished
***********************************************************
now you can burn the Image to a DVD-R(W) using the command:
dvdrecord dev=1,0,0 -v -dao "/pub/export//Badesalz_-_Hammersbald#3F.iso"
NOTE: Of course you have to adjust the dev=N,N,N parameter to match your device settings
Housekeeping...
Schaut ja aus als ob er alles durchläuft!!!
aber das ist immernoch shitty!
linvdr:/pub/export# ls
ls: ./Badesalz_-_Hammersbald#3F.iso: Value too large for defined data type
ich seh das teil auch nicht wenn ich über Samba zugreife!
die dinger lassen sich nichtmal mit rm löschen!!
und dies noch
Aufruf von vdrsync.pl
<name test -mkiso /video0/Badesalz_-_Hammersbald#3F/
Got parameter -basename
Got parameter -mkiso
Got parameter /video0/Badesalz_-_Hammersbald#3F/
got a directory on the command line
trying to open /video0/Badesalz_-_Hammersbald#3F/
Output files will be stored in ./
Found 0 to ignore
No input files specified, exiting
<desalz_-_Hammersbald#3F/2003-10-13.23.18.99.99.rec/
001.vdr 003.vdr index.vdr resume.vdr
002.vdr cur.logo marks.vdr summary.vdr
<desalz_-_Hammersbald#3F/2003-10-13.23.18.99.99.rec/001.vdr
Got parameter -basename
Got parameter -mkiso
Got parameter /video0/Badesalz_-_Hammersbald#3F/2003-10-13.23.18.99.99.rec/001.vdr
Output files will be stored in ./
Found 0 to ignore
Lots of debug stuff will be printed
Initialising and analysing the streams....
trying to open /video0/Badesalz_-_Hammersbald#3F/2003-10-13.23.18.99.99.rec/001.vdr
10 Mbytes of 0 readsending frame number 1 for analysis of stream e0
we got the decimal code 224 for e0
we got the stream 224 (e0), checking Video
Matched: ?-@#$?#? at 0 bitview of the header
0010110100000010010000000010001100100100100111110010001110000010
we got for fps: 0011
sending frame number 3 for analysis of stream c0
we got the decimal code 192 for c0
we got the stream 192 (c0), checking Audio
No Audio syncword at the beginning of the frame, searching
No Audio Sync found, returning -1
Audio Packet could not be analysed, skipping
sending frame number 8 for analysis of stream bd
we got the decimal code 189 for bd
sending frame number 28 for analysis of stream c0
we got the decimal code 192 for c0
we got the stream 192 (c0), checking Audio
streamtype is: MPEG1_Layer_2
bitrate is 192000
freq is 48000
copyright is 0
framelength in byte is 576
in sec: 0.024
MPEG1_Layer_2 for stream c0
AC3_audio for stream bd
video for stream e0
trying to open /video0/Badesalz_-_Hammersbald#3F/2003-10-13.23.18.99.99.rec/001.vdr
10 Mbytes of 734 readYes, it did start at 0
No Audio syncword at the beginning of the frame, searching
No Audio Sync found, returning -1
Analysis failed in audio stream c0, returning from check_audio_frames
No silent frame available for get_ac3_2_0_256000
Defined first audio frame as single frame for later sync in stream bd
Frame has a length of 1024
First packet ts for stream c0 in buffer 7066548107 last:7066986587
In stream c0: new start 7066575476
INSERT FRAMES:wrote additional 0 frames to close -711 ticks, leaving -711
IN SYNC AUDIO START (c0): diff is now: -711
CHUNKSTART: dropped 12 frames at the beginning of c0, start is now 7066576187 matching 7066575476 leaving -711
First packet ts for stream bd in buffer 7066550547 last:7067123667
In stream bd: new start 7066575476
INSERT FRAMES:wrote additional 0 frames to close -991 ticks, leaving -991
IN SYNC AUDIO START (bd): diff is now: -991
CHUNKSTART: dropped 9 frames at the beginning of bd, start is now 7066576467 matching 7066575476 leaving -991
734 Mbytes of 734 readshould do the final flush for stream e0
Flushing Video Buffer, 229066 bytes left
The last GOP contains 12 pics
FINAL: 7066575476::7190948276::34560
Final flush for stream c0
should do the final flush for stream c0
INSERT FRAMES:wrote additional 13 frames to close 27369 ticks, leaving -711
Final flush for stream bd
should do the final flush for stream bd
INSERT FRAMES:wrote additional 10 frames to close 27809 ticks, leaving -991
found key aspect_ratio
found subkey 4:3 with value 287
found key bitrate_value
found subkey 15000000 with value 287
found key vertical_size
found subkey 576 with value 287
found key fps
found subkey 25 with value 287
found key horizontal_size
found subkey 720 with value 287
found key mode
found subkey 2/0 with value 43180
Property aspect_ratio is 4:3
Property mode is 2/0
Property bitrate_value is 15000000
Property vertical_size is 576
Property horizontal_size is 720
Property fps is 25
MPEG1_Layer_2 for stream c0
AC3_audio for stream bd
video for stream e0
Got 3 files back
Saving File as test.mpg
-master-dvd was specified
mkfifo ./remuxfifo
the attempt to create FIFO returnd 0
Creating DVD structure using dvdauthor...
mplexing file to fifo
should execute nice -19 /usr/bin/tcmplex -i ".//test.mpv" -p ".//test.ac3" -s .//test0.mpa -m d and put it to the fifo
now the command is nice -19 /usr/bin/tcmplex -i ".//test.mpv" -p ".//test.ac3" -s .//test0.mpa -m d -o ./remuxfifo
Multiplexing streams for dvdauthor...
nice -19 /usr/bin/tcmplex -i ".//test.mpv" -p ".//test.ac3" -s .//test0.mpa -m d -o ./remuxfifo
/usr/bin/dvdauthor -v 4:3 -c 0:00,5:00,10:00,15:00,20:00,25:00 -o ".//test" .//remuxfifo
finished mplexing
Creating table of content...
/usr/bin/dvdauthor -T -o ".//test"
Creating ISO Image...
mkisofs -dvd-video -o ".//test.iso" ".//test"
***********************************************************
vdrsync finished
***********************************************************
now you can burn the Image to a DVD-R(W) using the command:
dvdrecord dev=1,0,0 -v -dao ".//test.iso"
NOTE: Of course you have to adjust the dev=N,N,N parameter to match your device settings
Housekeeping...
Deleting temp files
.//test.mpv
.//test.ac3
.//test0.mpa
Deleting DVD Files with: rm -r "./test"
rm -r "./test"
Naja
Servus,
nur mal so ne idee, poste mir doch bitte mal die Ergebnisse von:
df
fdisk -l /dev/hda
cat /etc/fstab
mount
Viele Grüße, Mirko
Meine vdr Platte ist mir abgeraucht soeben abgeraucht oder was anderes in meinem vdr-Rechner!
kann leider keine ausgaben mehr posten!
muß die ganze sache jetzt von vorn machen!
naja geht ja fix wenns "bloß" die platte war!
Vielleicht hats ja schon die ganze Zeit an der Platte gelegen!
Melde mich nach der neuinstallation!!
Danke nochmal für die schnelle und Nervenaufreibende hilfe!!
Ralle
P.S. muß jetzt weiterbasteln !
so jetzt ist der aufruf von ls wenigstens ok!
aber alle iso´s welche größer als 2GB werden sind via samba nicht sichtbar!
ich hoffe wir kommen der sache jetzt näher!
---------------------------------------------
linvdr:/pub/mplayer# df
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/hda1 39571244 13646236 23914880 36% /
/dev/ram 3963 196 3767 5% /ramdisk
/dev/hdb2 48874376 32203832 16670544 66% /pub/mplayer/filme_hdb2
---------------------------------------------
linvdr:/pub/mplayer# fdisk -l /dev/hda
Disk /dev/hda: 41.1 GB, 41174138880 bytes
255 heads, 63 sectors/track, 5005 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 5005 40202631 83 Linux
---------------------------------------------
linvdr:/pub/mplayer# cat /etc/fstab
#
/dev/hda1 / ext3 defaults,errors=remount-ro 0 1
# /dev/hda2 none swap sw 0 0
/dev/dvd /dvd auto ro,noauto,user,noexec 0 0
proc /proc proc defaults 0 0
devfs /devfs devfs defaults 0 0
/dev/hdb1 /pub/mplayer/sicherung_hdb1 reiserfs defaults 0 0
/dev/hdb2 /pub/mplayer/filme_hdb2 reiserfs defaults 0 0
---------------------------------------------
linvdr:/pub/mplayer# mount
/dev/hda1 on / type ext3 (rw)
devfs on /devfs type devfs (rw)
/dev/ram on /ramdisk type ext2 (rw)
/dev/hdb2 on /pub/mplayer/filme_hdb2 type reiserfs (rw)
/dev/hdb1 on /pub/mplayer/sicherung_hdb1 type reiserfs (rw)
thanks
ralle
Zitatalle iso´s welche größer als 2GB werden sind via samba nicht sichtbar!
kann ich auch bestätigen
Gruß
TEd
ZitatOriginal von Ted66
kann ich auch bestätigen
Gruß
TEd
Bitte mal ausprobieren:
smbd killen (killall smbd)
http://linvdr.org/download/linvdr/beta/smbd-gt2gb.tar.gz
runterladen (wget ...)
und in / entpacken. Dann smbd starten, oder neu booten..
Sind Dateien >2G via SMB nun sichtbar?
Tom
Endlich !!
Was hatte der samba-daemon denn für ein Problem??
Vielen Dank !
Das is ja wie ne Erlösung von ner Folter!
ZitatOriginal von takeittothemac
Endlich !!
Was hatte der samba-daemon denn für ein Problem??
Fehlender LARGFILE Support weil Samba unter einem Kernel 2.2.x übersetzt wurde.
Zitat
Vielen Dank !
Das is ja wie ne Erlösung von ner Folter!
Freut mich das es gelöst ist
Tom.
Hi
Es funktioniert jetzt..Danke
Mpg zu 4,2 giga ist jetzt sichtbar
Gruß
TEd
na bestens,
ich las´ hier meinen kopf rauchen. Wußte nicht woran es liegt!
Besten Dank.
Kann mir gemannt die datei zukommen lassen, uppen, etc. Man kann sie nicht mehr downloaden!!!!
Gruß Godi
Servus,
ZitatKann mir gemannt die datei zukommen lassen, uppen, etc. Man kann sie nicht mehr downloaden!!!!
Update besser auf LinVDR 0.4, dann brauchst du den Patch nicht mehr.
Viele Grüße, Mirko
Danach habe ich gesucht wie blöd.
Die Erlösung. Jetzt brauch ich nur noch die Datei (ne, ich will nicht updaten, zuviel Stress).
Super Jungs.
Danke/Gruss
Stephan
PS. Und schick mir mal bitte per email jemand die Datei
bieker(at)gmx.de
Und klappt natürlich auch 1a mit der Datei!!!!!
Gruss
Bambo
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!