mit Budget-Karte stürzt der Rechner ab

Hallo zusammen,
ich habe eine zweite DVB-S Karte in meinem VDR eingebunden. Der Rechner „läuft“ eigentlich ganz normal bis er anfängt eine Aufnahme zu starten.
Dann stürzt er total ab, nichts ist mehr möglich. Folgende Lösungsversuche habe ich bereits unternommen:
- tauschen der IRQ´s
- tauschen der Karten (Skystar2 <> TT2300)
- VDR neu aufgesetzt
- Kernel update
- Einen anderen PCI Steckplatz benutzt
- In einem Standard-PC klappt alles prima

Was kann ich noch unternehmen um das Mistding ans laufen zu bekommen.

Würde es mit einer anderen Budget-Karte funktionieren ?!?!

Danke
Gruß Jörg

Ich habe das aktuellen Mahlzeit Image installiert.

Mit Standard-PC meine ich, ich habe die Karten in einen anderen PC "reingedrückt" dort läuft der VDR problemlos.

Ich habe im BIOS alles unnötige abgeschaltet.

Mein Board ist ein Gigabyte GA-8IG1000MK.

logread reiche ich heute Abend nach

hier der lgread-Auszug

Sep 14 19:50:54 linvdr user.err vdr: [1291] text2skin_Enigma: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
Sep 14 19:50:54 linvdr user.err vdr: [1291] text2skin_Enigma: no translation found for '{AudioTrack} ({AudioChannel} channel)' in language 1 (Deutsch)
Sep 14 19:50:54 linvdr user.err vdr: [1291] text2skin_Enigma: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
Sep 14 19:50:54 linvdr user.err vdr: [1291] text2skin_Enigma: no translation found for '{AudioTrack} ({AudioChannel} channel)' in language 1 (Deutsch)
Sep 14 19:50:54 linvdr user.err vdr: [1291] text2skin_Enigma: no translation found for '{AudioChannel} channel' in language 1 (Deutsch)
Sep 14 19:50:54 linvdr user.err vdr: [1291] text2skin_Enigma: no translation found for '{PresentTitle}~{PresentShortText}' in language 1 (Deutsch)
Sep 14 19:50:54 linvdr user.err vdr: [1291] text2skin_Enigma: no translation found for '{PresentStartDateTime:%d.%m.} {PresentStartDateTime:%H\:%M}-{PresentEndDateTime:%H\:%M} ({PresentRemaining:%m}/{PresentDuration:%m}')' in language 1 (Deutsch)
Sep 14 19:50:54 linvdr user.err vdr: [1291] text2skin_Enigma: no translation found for '{PresentStartDateTime:%d.%m.} {PresentStartDateTime:%H\:%M}-{PresentEndDateTime:%H\:%M} ({PresentDuration:%m}')' in language 1 (Deutsch)
Sep 14 19:50:55 linvdr user.info vdr: [1291] text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.trans
Sep 14 19:50:55 linvdr user.info vdr: [1291] text2skin: loading /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.colors
Sep 14 19:50:55 linvdr user.info vdr: [1291] parsing /etc/vdr/plugins/text2skin/DeepBlue/DeepBlue.skin
Sep 14 19:50:55 linvdr user.err vdr: [1291] text2skin_DeepBlue: no translation found for 'Mute' in language 1 (Deutsch)
Sep 14 19:50:55 linvdr user.err vdr: [1291] text2skin_DeepBlue: no translation found for 'Rec:' in language 1 (Deutsch)
Sep 14 19:50:55 linvdr user.err vdr: [1291] text2skin_DeepBlue: no translation found for 'Rec:' in language 1 (Deutsch)
Sep 14 19:50:55 linvdr user.err vdr: [1291] text2skin_DeepBlue: no translation found for '{CurrentRecording:0} - {CurrentRecording:1} - {CurrentRecording:2} - {CurrentRecording:3}' in language 1 (Deutsch)
Sep 14 19:50:55 linvdr user.err vdr: [1291] text2skin_DeepBlue: no translation found for '{CurrentRecording:0} - {CurrentRecording:1} - {CurrentRecording:2}' in language 1 (Deutsch)
Sep 14 19:50:55 linvdr user.err vdr: [1291] text2skin_DeepBlue: no translation found for '{CurrentRecording:0} - {CurrentRecording:1}' in language 1 (Deutsch)
Sep 14 19:50:55 linvdr user.err vdr: [1291] text2skin_DeepBlue: no translation found for '-' in language 1 (Deutsch)
Sep 14 19:50:55 linvdr user.info vdr: [1291] starting plugin: trayopen
Sep 14 19:50:55 linvdr user.info vdr: [1291] starting plugin: tvonscreen
Sep 14 19:50:55 linvdr user.info vdr: [1291] starting plugin: vcd
Sep 14 19:50:55 linvdr user.info vdr: [1291] starting plugin: vdrc
Sep 14 19:50:55 linvdr user.info vdr: [1291] starting plugin: vdrcd
Sep 14 19:50:55 linvdr user.info vdr: [1291] starting plugin: vdrconvert
Sep 14 19:50:55 linvdr user.info vdr: [1291] starting plugin: weatherng
Sep 14 19:50:55 linvdr user.info vdr: [1291] loading /etc/vdr/themes/DeepBlue-default.theme
Sep 14 19:50:55 linvdr user.debug vdr: [1341] LIRC remote control thread started (pid=1341, tid=1341)
Sep 14 19:50:55 linvdr user.debug vdr: [1342] KBD remote control thread started (pid=1342, tid=1342)
Sep 14 19:50:55 linvdr user.debug vdr: [1291] remote control LIRC - keys known
Sep 14 19:50:55 linvdr user.debug vdr: [1291] remote control KBD - keys known
Sep 14 19:50:55 linvdr user.info vdr: [1291] switching to channel 1
Sep 14 19:50:55 linvdr user.debug vdr: [1291] setting watchdog timer to 900 seconds
Sep 14 19:50:55 linvdr user.debug vdr: [1344] Text2Skin: channelInfo display update thread started (pid=1344, tid=1344)
Sep 14 19:50:57 linvdr user.info vdr: [1291] connect from 127.0.0.1, port 35754 - accepted
Sep 14 19:50:59 linvdr user.info vdr: [1291] closing SVDRP connection
Sep 14 19:51:00 linvdr user.debug vdr: [1344] Text2Skin: channelInfo display update thread ended (pid=1344, tid=1344)
Sep 14 19:51:00 linvdr user.debug vdr: [1291] assuming manual start of VDR
Sep 14 19:51:01 linvdr auth.info sshd[1343]: Accepted password for root from 192.168.178.23 port 1075 ssh2
Sep 14 19:51:01 linvdr auth.info sshd[1343]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
Sep 14 19:51:01 linvdr auth.info PAM_unix[1343]: (ssh) session opened for user root by (uid=0)
Sep 14 19:51:01 linvdr auth.err PAM-env[1343]: Unable to open config file: No such file or directory
Sep 14 19:51:01 linvdr auth.err PAM-env[1347]: Unable to open config file: No such file or directory
Sep 14 19:51:05 linvdr user.debug vdr: [1291] max. latency time 1 seconds

Hier noch die lspci Meldungen

linvdr:~# lspci -v
00:00.0 Host bridge: Intel Corp.: Unknown device 2570 (rev 02)
Subsystem: Giga-byte Technology: Unknown device 2570
Flags: bus master, fast devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] #09 [0106]

00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2572 (rev 02) (prog-if 00 [VGA])
Subsystem: Giga-byte Technology: Unknown device 2572
Flags: bus master, fast devsel, latency 0, IRQ 12
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at f8100000 (32-bit, non-prefetchable) [size=512K]
I/O ports at b000 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1

00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev c2) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f8000000-f80fffff

00:1f.0 ISA bridge: Intel Corp.: Unknown device 24d0 (rev 02)
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp.: Unknown device 24db (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology: Unknown device 24d2
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at f000 [size=16]
Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corp.: Unknown device 24d3 (rev 02)
Subsystem: Giga-byte Technology: Unknown device 24d2
Flags: medium devsel, IRQ 5
I/O ports at 1400 [size=32]

01:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 000e
Flags: bus master, medium devsel, latency 32, IRQ 169
Memory at f8010000 (32-bit, non-prefetchable) [size=512]

01:01.0 Network controller: Techsan Electronics Co Ltd: Unknown device 2103 (rev 01)
Subsystem: Techsan Electronics Co Ltd: Unknown device 2103
Flags: bus master, slow devsel, latency 32, IRQ 185
Memory at f8000000 (32-bit, non-prefetchable) [size=64K]
I/O ports at 9000 [size=32]

01:08.0 Ethernet controller: Intel Corp.: Unknown device 1051 (rev 02)
Subsystem: Giga-byte Technology: Unknown device e000
Flags: bus master, medium devsel, latency 64, IRQ 177
Memory at f8011000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 9400 [size=64]
Capabilities: [dc] Power Management version 2

linvdr:~#

Ich weis nicht mehr weiter, hier noch der dmesg-Auszug

linvdr:~# dmesg
/Xeon Extended MCE MSRs (12) available
mtrr: v2.0 (20020519)
CPU: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfade0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1080-10bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1e.0
IO window: 9000-9fff
MEM window: f8000000-f80fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.25 [Flags: R/W].
JFS: nTxBlock = 3898, nTxLock = 31188
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
vesafb: framebuffer at 0xf0000000, mapped to 0xdfa80000, using 1875k, total 16192k
vesafb: mode is 800x600x16, linelength=1600, pages=15
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: Mode is VGA compatible
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN] (on)
ACPI: Thermal Zone [THRM] (22 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG SP2514N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 488395055 sectors (250058 MB)
native capacity is 488397168 sectors (250059 MB)
hda: Host Protected Area disabled.
hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1
hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.004.
libata version 1.20 loaded.
usbmon: debugfs is not available
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
SLPB PCI0 HUB0 USB0 USB1 USB2 USB3 USBE
ACPI: (supports S0 S3 S4 S5)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 172k freed
EXT3 FS on hda1, internal journal
cdfs 2.6.12 loaded.
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
Adding 262136k swap on /var/vm/swapfile. Priority:-1 extents:69 across:266632k
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 177
e100: eth0: e100_probe: addr 0xf8011000, irq 177, MAC addr 00:14:85:B0:97:FB
e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex
Linux video capture interface: v1.00
saa7146: register extension 'dvb'.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 169
saa7146: found saa7146 @ mem dfce8000 (revision 1, irq 169) (0x13c2,0x000e).
DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.3).
adapter has MAC addr = 00:d0:5c:05:17:4b
dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80f62623
dvb-ttpci: firmware @ card 0 supports CI link layer interface
dvb-ttpci: Crystal audio DAC @ card 0 detected
saa7146_vv: saa7146 (0): registered device video0 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi0 [v4l2]
DVB: registering frontend 0 (ST STV0299 DVB-S)...
input: DVB on-card IR receiver as /class/input/input0
dvb-ttpci: found av7110-0.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 1
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 185
DVB: registering new adapter (FlexCop Digital TV device).
b2c2-flexcop: MAC address = 00:d0:d7:01:cd:e6
b2c2-flexcop: found the stv0299 at i2c address: 0x68
DVB: registering frontend 1 (ST STV0299 DVB-S)...
b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopII' complete
lirc_dev: IR Remote Control driver registered, at major 61
lirc_serial: no version for "lirc_unregister_plugin" found: kernel tainted.
lirc_serial: auto-detected active low receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
linvdr:~#

Wie soll ich den an den lgread-Auszug kommen wenn die Kiste abstürzt ?!?!

Hi ohosch, wie Du hast Dir deinen eigenen Kernel gebaut ?!?!
kannst Du ihn mir zu mailen ?!?!? Das wäre super.
Bei mir wird aber auch das Modul „b2c2-flexcop_pci“ geladen

Folgende Meldung habe ich jetzt auf dem Monitor
[<c4826a2>] start_kernel+0x42/0x173
Code: 3f e0 83 c4 10 6a 00 8b 4c 24 74 ff b1 8c 00 00 00 e8 75 5d f9 ff 5a 85 c0 59 74 19 68 d4 f9 d1 df 68 e0 14 d2 df e8 7c b0 3f e0 <0f> 0b ee 01 20 15 d2 df 5f 5d 6a 02 68 fc 5f 00 00 68 00 00 0e
(0)Kernel panic – not syncing: Fatal exception in interrupt.