[linVDR-0.6/0.7 package] Kernel 2.6.11.10

    Zitat

    Original von DarkAngel
    Hm, ohne ACPI und APIC sind es wie eh und je 16 IRQs, die es unter der Hardware zu verteilen gilt. Da das manchmal knapp wird, teilt sich einige Hardware einen IRQ. Das führt manchmal zu Problemen.


    Mit ACPI und APIC gibt es ein paar mehr IRQs (weiß nicht, wieviele da möglich sind). Meine beiden DVB-Karten sind z.B. jetzt auf IRQ 17 und 19, vorher hat die eine sich einen mit der Netzwerkkarte geteilt und die andere mit der Soundkarte.


    Ich hab' jetzt ACPI und APIC wieder aktiv und die Karte hat sich den 17ner geholt..... schau'n mer mal ... bis jetzt läuft's noch. Ich nehm gerade Jackie Chan auf und danach "Collateral Damage"mit Arny :).


    Hoffentlich gehts ?(


    Gruß


    Claus

    ----------------------------------------------------------------
    Konfig: Shuttle X-PC 2 GHz Cel., Haupauge WinTV DVB-S, ctvdr5. :lovevdr

    Tja,
    ich habe die beiden Pakete installiert. Nach dem starten sah zunächst alles ganz gut aus, sogar Bild uind Ton.
    Nach dem ersten Programmwechsel war dann kein Bild mehr da.
    Die Anzeige des Senders war in grau in doppelter Größe
    Das Menü war in den üblichen FArben, - jedenfalls soweit ich dass bei einem viertel der Größe erkennen konte.


    Ich bin ratlos.


    Hallo Leute,


    ich hatte bis jetzt Probleme, meinen USB Card Reader zum laufen zu bewegen (dachte ich).


    Beim mounten der Karte bekam ich immer folgende Meldung:

    Code
    linvdr:/# mount /mnt/cfcard
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
       or too many mounted file systems


    Alle Module, wie in diversen Threads beschrieben, waren geladen. Im Log bin ich nun auf folgendes gestossen:

    Code
    Oct 22 20:52:00 linvdr syslog.warn klogd: Unable to load NLS charset cp437
Oct 22 20:52:00 linvdr syslog.err klogd: FAT: codepage cp437 not found


    Testweise habe ich die Karte mal mit ext3 formatiert. Das hat funktioniert und die Karte lies sich mounten.
    Eigentlich dürften sich überhaupt keine FAT-Partitionen mounten lassen und der Card Read ist völlig in Ordnung.
    Nach meinem (Kernelcompilierhalb-)Wissen nach, würde ich vermuten, dass irgendein Modul fehlt (cp437 ?!?).


    Vieleicht könnte der Kernel-König (Hallo DarkAngel) mal einen Blick auf das Problemchen werfen.


    Grüße Mik


    PS: Ich möchte nicht müde werden, mich bei DarkAngel zu bedanken. Manche vergessen doch immer wieder, dass das Bereitstellen von solchen Packen ein Heidenaufwand ist. Und dann muss man sich auch noch ständig das Bitten und Quengeln der anderen (mich eingeschlossen) anhören.

    Denken hilft
    c't-VDR 5, TT 1.5 DVB-s, SkyStar 2.68c, Elitegroup 741GX-M

    Einmal editiert, zuletzt von mik1 ()

    Astrein!


    Ein

    Code
    mount -o codepage=850 /dev/sda1 /mnt/cfcard

    hat super funktioniert. Das Ganze noch in die /etc/fstab eingetragen, dann klappt's auch mit der Nachbarin.


    Besten Dank.


    Mik

    Denken hilft
    c't-VDR 5, TT 1.5 DVB-s, SkyStar 2.68c, Elitegroup 741GX-M

    Ich hatte den Kernel 2.6.5 von www.linvdr.org, und habe heute den Kernel installiert. Dabei gibts Probleme mit der externen Harddisk, die am USB-Port hängt, die nicht mehr korrekt erkannt wird.


    Also von vorne:


    1. [list=1] Kernel 2.6.5., Rechner rebootet und logread, cat /proc/scsi/scsi, cat /proc/interrupts, lspci, fdisk -l schaut wie folgt aus:



    --------------------------------------------------------------


    Oct 27 11:49:03 video syslog.info syslogd started: BusyBox v1.00-pre8 (2004.03.02-16:27+0000)
    Oct 27 11:49:03 video syslog.info klogd: 8139too Fast Ethernet driver 0.9.27
    Oct 27 11:49:03 video syslog.info klogd: eth0: RealTek RTL8139 at 0xd0a7d000, 00:11:2f:27:3b:67, IRQ 10
    Oct 27 11:49:03 video syslog.debug klogd: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    Oct 27 11:49:03 video syslog.info klogd: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    Oct 27 11:49:04 video syslog.info klogd: kjournald starting. Commit interval 5 seconds
    Oct 27 11:49:04 video syslog.info klogd: EXT3 FS on sda1, internal journal
    Oct 27 11:49:04 video syslog.info klogd: EXT3-fs: mounted filesystem with ordered data mode.
    Oct 27 11:49:04 video syslog.info klogd: Linux video capture interface: v1.00
    Oct 27 11:49:04 video auth.info sshd[243]: Server listening on 0.0.0.0 port 22.
    Oct 27 11:49:04 video syslog.warn klogd: saa7146: register extension 'dvb'.
    Oct 27 11:49:04 video syslog.warn klogd: found saa7146 @ mem d0b21000 (revision 1, irq 9) (0x13c2,0x0003).
    Oct 27 11:49:04 video syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1).
    Oct 27 11:49:05 video syslog.warn klogd: probe_tuner: try to attach to Technotrend/Hauppauge PCI rev2.1
    Oct 27 11:49:05 video syslog.warn klogd: drivers/media/dvb/frontends/stv0299.c: setup for tuner BSRU6, TDQB-S00x
    Oct 27 11:49:05 video syslog.warn klogd: DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
    Oct 27 11:49:05 video syslog.warn klogd: Technotrend/Hauppauge PCI rev2.1 adapter 0 has MAC addr = 00:d0:5c:22:f8:f5
    Oct 27 11:49:05 video syslog.warn klogd: gpioirq unknown type=0 len=0
    Oct 27 11:49:05 video syslog.warn klogd: DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261b
    Oct 27 11:49:05 video syslog.warn klogd: DVB: AV7111(0) - firmware supports CI link layer interface
    Oct 27 11:49:05 video syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Oct 27 11:49:05 video syslog.warn klogd: videodev: "av7110" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/
    Oct 27 11:49:05 video syslog.warn klogd: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
    Oct 27 11:49:05 video syslog.info klogd: av7110: found av7110-0.
    Oct 27 11:49:05 video syslog.warn klogd: saa7146: register extension 'budget dvb'.
    Oct 27 11:49:05 video syslog.warn klogd: saa7146: register extension 'budget_ci dvb'.
    Oct 27 11:49:05 video syslog.warn klogd: saa7146: register extension 'budget dvb /w video in'.
    Oct 27 11:49:06 video syslog.warn klogd: drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found
    Oct 27 11:49:06 video syslog.warn klogd:
    Oct 27 11:49:06 video syslog.warn klogd: DVB: registering new adapter (Technisat SkyStar2 driver).
    Oct 27 11:49:06 video syslog.warn klogd: probe_tuner: try to attach to Technisat SkyStar2 driver
    Oct 27 11:49:06 video syslog.warn klogd: drivers/media/dvb/frontends/stv0299.c: setup for tuner Samsung TBMU24112IMB
    Oct 27 11:49:06 video syslog.warn klogd: DVB: registering frontend 1:0 (STV0299/TSA5059/SL1935 based)...
    Oct 27 11:49:06 video syslog.warn klogd: master_xfer: read error !
    Oct 27 11:49:06 video syslog.warn klogd: message 0: flags=0x0, addr=0xe, buf=0x7e, len=1
    Oct 27 11:49:06 video syslog.warn klogd: message 1: flags=0x1, addr=0xe, buf=0xcb, len=1
    Oct 27 11:49:07 video user.info vdr[277]: VDR version 1.2.6 started
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-browser.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-clock.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-console.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-image.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-osdpip.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.2.6
    Oct 27 11:49:07 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-pcd.so.1.2.6
    Oct 27 11:49:08 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.2.6
    Oct 27 11:49:08 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-status.so.1.2.6
    Oct 27 11:49:08 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-timeline.so.1.2.6
    Oct 27 11:49:08 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.2.6
    Oct 27 11:49:08 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.2.6
    Oct 27 11:49:08 video user.info vdr[277]: loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.2.6
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/setup.conf
    Oct 27 11:49:08 video user.err vdr[277]: ERROR: unknown config parameter: ClrDateTime = 0
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/sources.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/diseqc.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/channels.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/timers.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/commands.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/reccmds.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/svdrphosts.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/ca.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/remote.conf
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/keymacros.conf
    Oct 27 11:49:08 video user.debug vdr[277]: probing /dev/dvb/adapter0/frontend0
    Oct 27 11:49:08 video user.debug vdr[283]: EIT processing thread started (pid=283) - master
    Oct 27 11:49:08 video user.debug vdr[284]: tuner thread started on device 1 (pid=284)
    Oct 27 11:49:08 video user.debug vdr[277]: probing /dev/dvb/adapter1/frontend0
    Oct 27 11:49:08 video user.debug vdr[286]: EIT processing thread started (pid=286)
    Oct 27 11:49:08 video user.debug vdr[287]: tuner thread started on device 2 (pid=287)
    Oct 27 11:49:08 video user.debug vdr[277]: probing /dev/dvb/adapter2/frontend0
    Oct 27 11:49:08 video user.info vdr[277]: found 2 video devices
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: browser (0.1): A simple OSD Textbrowser
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: clock (0.0.4): A Simple Clock
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: console (0.5.1): Expands VDR to a Console on TV
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: dvd (0.3.4-rc10): turn VDR into an (almost) full featured DVD player
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: femon (0.0.3a): DVB Signal Information Monitor (OSD)
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: image (0.0.8): A Image Viewer plugin
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: mp3 (0.8.3): A versatile audio player
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/plugins/mp3sources.conf
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: mplayer (0.8.3): A MPlayer calling plugin
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/plugins/mplayersources.conf
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: osdpip (0.0.4): OSD Picture-in-Picture
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: osdteletext (0.3.2): Displays teletext on the OSD
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: pcd (0.0.3): PhotoCD Player
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: sleeptimer (0.4): Sleep-Timer for VDR
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: status (0.1.0): Status monitor test
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: timeline (0.8.1): Show timer overview and collisions
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: tvonscreen (0.5.0): Shows the EPG info in form of a typical TV magazine
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: vcd (0.0.6c): VideoCD Player
    Oct 27 11:49:08 video user.info vdr[277]: initializing plugin: remote (0.2.1): Remote control
    Oct 27 11:49:08 video user.info vdr[277]: setting primary device to 1
    Oct 27 11:49:08 video user.info vdr[277]: SVDRP listening on port 2001
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: browser
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: clock
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: console
    Oct 27 11:49:08 video user.info vdr[288]: console: output handler thread startet (pid=288)
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: dvd
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: femon
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: image
    Oct 27 11:49:08 video user.info vdr[277]: loading /etc/vdr/plugins/imagesources.conf
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: mp3
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: mplayer
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: osdpip
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: osdteletext
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: pcd
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: sleeptimer
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: status
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: timeline
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: tvonscreen
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: vcd
    Oct 27 11:49:08 video user.info vdr[277]: starting plugin: remote
    Oct 27 11:49:08 video user.debug vdr[277]: remote: using '/dev/input/event1'
    Oct 27 11:49:08 video user.debug vdr[277]: remote-event1: autorepeat supported
    Oct 27 11:49:08 video user.debug vdr[277]: remote-event1: exclusive access granted
    Oct 27 11:49:08 video user.debug vdr[277]: remote-event1: keymap loaded '/proc/av7110_ir' flags 001f4000
    Oct 27 11:49:08 video user.err vdr[277]: ERROR: /dev/lircd: No such file or directory
    Oct 27 11:49:08 video user.debug vdr[290]: KBD remote control thread started (pid=290)
    Oct 27 11:49:08 video user.debug vdr[277]: remote control remote-event1 - keys known
    Oct 27 11:49:08 video user.err vdr[277]: ERROR: remote control LIRC not ready!
    Oct 27 11:49:08 video user.debug vdr[277]: remote control KBD - keys known
    Oct 27 11:49:08 video user.info vdr[277]: switching to channel 24
    Oct 27 11:49:08 video user.debug vdr[277]: status: cStatusTest::ChannelSwitch 0 0
    Oct 27 11:49:08 video user.debug vdr[291]: receiver thread started on device 1 (pid=291)
    Oct 27 11:49:08 video user.debug vdr[277]: status: cStatusTest::ChannelSwitch 0 24
    Oct 27 11:49:08 video user.debug vdr[277]: status: cStatusTest::SetVolume 255 1
    Oct 27 11:49:08 video user.debug vdr[277]: reading EPG data from /ramdisk/epg.data
    Oct 27 11:49:08 video user.debug vdr[277]: setting watchdog timer to 900 seconds
    Oct 27 11:49:08 video user.info vdr[277]: logo /etc/vdr/icons/Kabel 1.logo loaded.
    Oct 27 11:49:08 video user.debug vdr[277]: status: cStatusTest::OsdChannel 24 Kabel 1
    Oct 27 11:49:08 video user.debug vdr[277]: status: cStatusTest::OsdProgramme
    Oct 27 11:49:08 video user.debug vdr[277]: 11:46 Bill Cosby Show
    Oct 27 11:49:08 video user.debug vdr[277]: (null)
    Oct 27 11:49:08 video user.debug vdr[277]: 12:17 Ein Engel auf Erden
    Oct 27 11:49:08 video user.debug vdr[277]: (null)
    Oct 27 11:49:13 video user.info vdr[277]: connect from 127.0.0.1, port 32768 - accepted
    Oct 27 11:49:14 video user.debug vdr[277]: status: cStatusTest::OsdClear
    Oct 27 11:49:14 video user.debug vdr[277]: max. latency time 1 seconds
    Oct 27 11:49:15 video syslog.warn klogd: nfs warning: mount version older than kernel
    Oct 27 11:49:16 video cron.notice crond[303]: crond 2.3.2 dillon, started, log level 8
    Oct 27 11:49:16 video daemon.info init: Starting pid 308, console /dev/tty1: '/sbin/getty'
    Oct 27 11:49:16 video daemon.info init: Starting pid 309, console /dev/tty2: '/sbin/getty'
    Oct 27 11:49:16 video daemon.info init: Starting pid 310, console /dev/tty3: '/sbin/getty'
    Oct 27 11:49:16 video daemon.info init: Starting pid 311, console /dev/tty4: '/sbin/getty'
    Oct 27 11:49:17 video user.info vdr[277]: closing SVDRP connection
    Oct 27 11:49:21 video user.info vdr[284]: CAM: CryptoWorks, 01, D000, 0000
    Oct 27 11:49:34 video auth.info sshd[314]: Could not reverse map address 192.168.208.208.
    Oct 27 11:49:36 video auth.notice PAM_unix[314]: authentication failure; (uid=0) -> root for ssh service
    Oct 27 11:49:39 video auth.info sshd[314]: Failed password for root from 192.168.208.208 port 35339 ssh2
    Oct 27 11:49:46 video auth.info sshd[314]: Failed password for root from 192.168.208.208 port 35339 ssh2
    Oct 27 11:49:49 video auth.info sshd[314]: Accepted password for root from 192.168.208.208 port 35339 ssh2
    Oct 27 11:49:49 video auth.info sshd[314]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
    Oct 27 11:49:49 video auth.info PAM_unix[314]: (ssh) session opened for user root by (uid=0)
    Oct 27 11:49:49 video auth.err PAM-env[314]: Unable to open config file: No such file or directory
    Oct 27 11:49:49 video auth.err PAM-env[315]: Unable to open config file: No such file or directory
    Oct 27 11:50:07 video user.debug vdr[277]: status: cStatusTest::ChannelSwitch 1 0
    Oct 27 11:50:07 video user.debug vdr[277]: status: cStatusTest::ChannelSwitch 1 12
    Oct 27 11:50:28 video user.debug vdr[277]: status: cStatusTest::ChannelSwitch 1 0
    Oct 27 11:50:28 video user.debug vdr[277]: status: cStatusTest::ChannelSwitch 1 14
    Oct 27 11:50:49 video user.debug vdr[277]: status: cStatusTest::ChannelSwitch 1 0
    Oct 27 11:50:49 video user.debug vdr[277]: status: cStatusTest::ChannelSwitch 1 15


    --------------------------------------------------------------


    Attached devices:
    Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: WDC WD25 Model: 00BB-98GUA0 Rev: 08.0
    Type: Direct-Access ANSI SCSI revision: 02

    --------------------------------------------------------------

    CPU0
    0: 133679 XT-PIC timer
    1: 8 XT-PIC i8042
    2: 0 XT-PIC cascade
    8: 0 XT-PIC rtc
    9: 59303 XT-PIC acpi, uhci_hcd, uhci_hcd, saa7146 (0)
    10: 1910 XT-PIC eth0, Skystar2
    11: 753 XT-PIC ehci_hcd
    12: 0 XT-PIC uhci_hcd
    14: 7066 XT-PIC ide0
    15: 67 XT-PIC ide1
    NMI: 0
    ERR: 0

    --------------------------------------------------------------

    00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 03)
    00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 03)
    00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 02)
    00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 02)
    00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 02)
    00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 02)
    00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 82)
    00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 02)
    00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 02)
    00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev 02)
    02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
    02:09.0 VGA compatible controller: ATI Technologies Inc 264VT [Mach64 VT] (rev 40)
    02:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
    02:0c.0 Network controller: Techsan Electronics Co Ltd: Unknown device 2103 (rev 02)

    --------------------------------------------------------------


    Disk /dev/hda: 16 heads, 63 sectors, 8354 cylinders
    Units = cylinders of 1008 * 512 bytes


    Device Boot Start End Blocks Id System
    /dev/hda1 * 1 8352 4208998+ 83 Linux
    Partition 1 does not end on cylinder boundary:
    phys=(523, 254, 63) should be (523, 15, 63)


    Disk /dev/hdb: 255 heads, 63 sectors, 19929 cylinders
    Units = cylinders of 16065 * 512 bytes


    Device Boot Start End Blocks Id System
    /dev/hdb1 * 1 19929 160079661 83 Linux


    Disk /dev/sda: 255 heads, 63 sectors, 30401 cylinders
    Units = cylinders of 16065 * 512 bytes


    Device Boot Start End Blocks Id System
    /dev/sda1 1 30401 244196001 83 Linux


    --------------------------------------------------------------


    [/list=1]



    2. [list=2] apt-get install kernel-image-2.6.8, und setserial in runvdr geändert [/list=2]


    3. [list=3] Rechner rebootet und da kommt schon die erste Fehlermeldung:



    "PCI: Cannot allocate resource region 4 of device 0000:00:1f.3"


    [/list=3]


    4. [list=4] logread, cat /proc/scsi/scsi, cat /proc/interrupts, lspci, fdisk -l schaut wie folgt aus:




    --------------------------------------------------------------

    Oct 27 11:54:02 video syslog.info syslogd started: BusyBox v1.00-pre8 (2004.03.02-16:27+0000)
    Oct 27 11:54:03 video syslog.info klogd: 8139too Fast Ethernet driver 0.9.27
    Oct 27 11:54:03 video syslog.info klogd: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
    Oct 27 11:54:03 video syslog.info klogd: eth0: RealTek RTL8139 at 0xd0a96000, 00:11:2f:27:3b:67, IRQ 20
    Oct 27 11:54:03 video syslog.debug klogd: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    Oct 27 11:54:03 video syslog.info klogd: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    Oct 27 11:54:03 video syslog.info klogd: Linux video capture interface: v1.00
    Oct 27 11:54:03 video auth.info sshd[1675]: Server listening on 0.0.0.0 port 22.
    Oct 27 11:54:04 video syslog.warn klogd: saa7146: register extension 'dvb'.
    Oct 27 11:54:04 video syslog.info klogd: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
    Oct 27 11:54:04 video syslog.warn klogd: found saa7146 @ mem d0b37000 (revision 1, irq 22) (0x13c2,0x0003).
    Oct 27 11:54:04 video syslog.warn klogd: DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1 or 2.2).
    Oct 27 11:54:04 video syslog.warn klogd: stv0299: try to attach to Technotrend/Hauppauge PCI rev2.1 or 2.2
    Oct 27 11:54:05 video syslog.warn klogd: stv0299: setup for tuner BSRU6, TDQB-S00x
    Oct 27 11:54:05 video syslog.warn klogd: DVB: registering frontend 0 (STV0299/TSA5059/SL1935 based)...
    Oct 27 11:54:05 video syslog.err klogd: mt312_read: ret == -121
    Oct 27 11:54:06 video syslog.warn klogd: adapter has MAC addr = 00:d0:5c:22:f8:f5
    Oct 27 11:54:06 video syslog.warn klogd: gpioirq unknown type=0 len=0
    Oct 27 11:54:06 video syslog.warn klogd: DVB: AV7111(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
    Oct 27 11:54:06 video syslog.warn klogd: DVB: AV7111(0) - firmware supports CI link layer interface
    Oct 27 11:54:06 video syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Oct 27 11:54:06 video syslog.warn klogd: saa7146 (0): registered device video0 [v4l2]
    Oct 27 11:54:06 video syslog.info klogd: av7110: found av7110-0.
    Oct 27 11:54:06 video syslog.warn klogd: saa7146: register extension 'budget dvb'.
    Oct 27 11:54:06 video syslog.warn klogd: saa7146: register extension 'budget_ci dvb'.
    Oct 27 11:54:06 video syslog.warn klogd: saa7146: register extension 'budget dvb /w video in'.
    Oct 27 11:54:06 video syslog.info klogd: ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
    Oct 27 11:54:06 video syslog.warn klogd: drivers/media/dvb/b2c2/skystar2.c: FlexCopIIB(rev.195) chip found
    Oct 27 11:54:06 video syslog.warn klogd:
    Oct 27 11:54:06 video syslog.warn klogd: DVB: registering new adapter (Technisat SkyStar2 driver).
    Oct 27 11:54:06 video syslog.warn klogd: stv0299: try to attach to Technisat SkyStar2 driver
    Oct 27 11:54:06 video syslog.warn klogd: stv0299: setup for tuner Samsung TBMU24112IMB
    Oct 27 11:54:06 video syslog.warn klogd: DVB: registering frontend 1 (STV0299/TSA5059/SL1935 based)...
    Oct 27 11:54:06 video syslog.warn klogd: master_xfer: read error !
    Oct 27 11:54:06 video syslog.warn klogd: message 0: flags=0x0, addr=0xe, buf=0x7e, len=1
    Oct 27 11:54:06 video syslog.warn klogd: message 1: flags=0x1, addr=0xe, buf=0xa1, len=1
    Oct 27 11:54:06 video syslog.err klogd: mt312_read: ret == -121
    Oct 27 11:54:07 video user.info vdr[1816]: VDR version 1.2.6 started
    Oct 27 11:54:07 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-browser.so.1.2.6
    Oct 27 11:54:07 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-clock.so.1.2.6
    Oct 27 11:54:07 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-console.so.1.2.6
    Oct 27 11:54:07 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.2.6
    Oct 27 11:54:07 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-femon.so.1.2.6
    Oct 27 11:54:07 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-image.so.1.2.6
    Oct 27 11:54:07 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-osdpip.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-pcd.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-status.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-timeline.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-tvonscreen.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading plugin: /usr/lib/vdr/plugins/libvdr-remote.so.1.2.6
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/setup.conf
    Oct 27 11:54:08 video user.err vdr[1816]: ERROR: unknown config parameter: ClrDateTime = 0
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/sources.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/diseqc.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/channels.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/timers.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/commands.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/reccmds.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/svdrphosts.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/ca.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/remote.conf
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/keymacros.conf
    Oct 27 11:54:08 video user.debug vdr[1816]: probing /dev/dvb/adapter0/frontend0
    Oct 27 11:54:08 video user.debug vdr[1832]: EIT processing thread started (pid=1832) - master
    Oct 27 11:54:08 video user.debug vdr[1833]: tuner thread started on device 1 (pid=1833)
    Oct 27 11:54:08 video user.debug vdr[1816]: probing /dev/dvb/adapter1/frontend0
    Oct 27 11:54:08 video user.debug vdr[1835]: EIT processing thread started (pid=1835)
    Oct 27 11:54:08 video user.debug vdr[1836]: tuner thread started on device 2 (pid=1836)
    Oct 27 11:54:08 video user.debug vdr[1816]: probing /dev/dvb/adapter2/frontend0
    Oct 27 11:54:08 video user.info vdr[1816]: found 2 video devices
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: browser (0.1): A simple OSD Textbrowser
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: clock (0.0.4): A Simple Clock
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: console (0.5.1): Expands VDR to a Console on TV
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: dvd (0.3.4-rc10): turn VDR into an (almost) full featured DVD player
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: femon (0.0.3a): DVB Signal Information Monitor (OSD)
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: image (0.0.8): A Image Viewer plugin
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: mp3 (0.8.3): A versatile audio player
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/plugins/mp3sources.conf
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: mplayer (0.8.3): A MPlayer calling plugin
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/plugins/mplayersources.conf
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: osdpip (0.0.4): OSD Picture-in-Picture
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: osdteletext (0.3.2): Displays teletext on the OSD
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: pcd (0.0.3): PhotoCD Player
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: sleeptimer (0.4): Sleep-Timer for VDR
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: status (0.1.0): Status monitor test
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: timeline (0.8.1): Show timer overview and collisions
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: tvonscreen (0.5.0): Shows the EPG info in form of a typical TV magazine
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: vcd (0.0.6c): VideoCD Player
    Oct 27 11:54:08 video user.info vdr[1816]: initializing plugin: remote (0.2.1): Remote control
    Oct 27 11:54:08 video user.info vdr[1816]: setting primary device to 1
    Oct 27 11:54:08 video user.info vdr[1816]: SVDRP listening on port 2001
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: browser
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: clock
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: console
    Oct 27 11:54:08 video user.info vdr[1837]: console: output handler thread startet (pid=1837)
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: dvd
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: femon
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: image
    Oct 27 11:54:08 video user.info vdr[1816]: loading /etc/vdr/plugins/imagesources.conf
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: mp3
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: mplayer
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: osdpip
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: osdteletext
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: pcd
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: sleeptimer
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: status
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: timeline
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: tvonscreen
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: vcd
    Oct 27 11:54:08 video user.info vdr[1816]: starting plugin: remote
    Oct 27 11:54:08 video user.debug vdr[1816]: remote: using '/dev/input/event1'
    Oct 27 11:54:08 video user.debug vdr[1816]: remote-event1: autorepeat supported
    Oct 27 11:54:08 video user.debug vdr[1816]: remote-event1: exclusive access granted
    Oct 27 11:54:08 video user.debug vdr[1816]: remote-event1: keymap loaded '/proc/av7110_ir' flags 001f4000
    Oct 27 11:54:08 video user.err vdr[1816]: ERROR: /dev/lircd: No such file or directory
    Oct 27 11:54:08 video user.debug vdr[1839]: KBD remote control thread started (pid=1839)
    Oct 27 11:54:08 video user.debug vdr[1816]: remote control remote-event1 - keys known
    Oct 27 11:54:08 video user.err vdr[1816]: ERROR: remote control LIRC not ready!
    Oct 27 11:54:08 video user.debug vdr[1816]: remote control KBD - keys known
    Oct 27 11:54:08 video user.info vdr[1816]: switching to channel 24
    Oct 27 11:54:08 video user.debug vdr[1816]: status: cStatusTest::ChannelSwitch 0 0
    Oct 27 11:54:08 video user.debug vdr[1840]: receiver thread started on device 1 (pid=1840)
    Oct 27 11:54:08 video user.debug vdr[1816]: status: cStatusTest::ChannelSwitch 0 24
    Oct 27 11:54:08 video user.debug vdr[1816]: status: cStatusTest::SetVolume 255 1
    Oct 27 11:54:08 video user.debug vdr[1816]: reading EPG data from /ramdisk/epg.data
    Oct 27 11:54:08 video user.debug vdr[1816]: setting watchdog timer to 900 seconds
    Oct 27 11:54:08 video user.info vdr[1816]: logo /etc/vdr/icons/Kabel 1.logo loaded.
    Oct 27 11:54:08 video user.debug vdr[1816]: status: cStatusTest::OsdChannel 24 Kabel 1
    Oct 27 11:54:08 video user.debug vdr[1816]: status: cStatusTest::OsdProgramme
    Oct 27 11:54:08 video user.debug vdr[1816]: 11:46 Bill Cosby Show
    Oct 27 11:54:08 video user.debug vdr[1816]: (null)
    Oct 27 11:54:08 video user.debug vdr[1816]: 12:17 Ein Engel auf Erden
    Oct 27 11:54:08 video user.debug vdr[1816]: (null)
    Oct 27 11:54:13 video user.debug vdr[1816]: status: cStatusTest::OsdClear
    Oct 27 11:54:14 video syslog.warn klogd: nfs warning: mount version older than kernel
    Oct 27 11:54:15 video cron.notice crond[1854]: crond 2.3.2 dillon, started, log level 8
    Oct 27 11:54:15 video daemon.info init: Starting pid 1859, console /dev/tty1: '/sbin/getty'
    Oct 27 11:54:15 video daemon.info init: Starting pid 1860, console /dev/tty2: '/sbin/getty'
    Oct 27 11:54:15 video daemon.info init: Starting pid 1870, console /dev/tty4: '/sbin/getty'
    Oct 27 11:54:15 video daemon.info init: Starting pid 1866, console /dev/tty3: '/sbin/getty'
    Oct 27 11:54:15 video user.debug vdr[1816]: max. latency time 2 seconds
    Oct 27 11:54:15 video user.info vdr[1816]: connect from 127.0.0.1, port 32768 - accepted
    Oct 27 11:54:18 video user.info vdr[1816]: closing SVDRP connection
    Oct 27 11:54:19 video user.info vdr[1833]: CAM: CryptoWorks, 01, D000, 0000
    Oct 27 11:55:08 video user.debug vdr[1816]: status: cStatusTest::ChannelSwitch 1 0
    Oct 27 11:55:08 video user.debug vdr[1816]: status: cStatusTest::ChannelSwitch 1 12
    Oct 27 11:55:29 video user.debug vdr[1816]: status: cStatusTest::ChannelSwitch 1 0
    Oct 27 11:55:29 video user.debug vdr[1816]: status: cStatusTest::ChannelSwitch 1 14
    Oct 27 11:55:36 video auth.info sshd[1953]: Could not reverse map address 192.168.208.208.
    Oct 27 11:55:38 video auth.info sshd[1953]: Accepted password for root from 192.168.208.208 port 35343 ssh2
    Oct 27 11:55:38 video auth.info sshd[1953]: lastlog_get_entry: Error reading from /var/log/lastlog: Bad file descriptor
    Oct 27 11:55:38 video auth.info PAM_unix[1953]: (ssh) session opened for user root by (uid=0)
    Oct 27 11:55:38 video auth.err PAM-env[1953]: Unable to open config file: No such file or directory
    Oct 27 11:55:38 video auth.err PAM-env[1954]: Unable to open config file: No such file or directory

    --------------------------------------------------------------

    Attached devices:
    Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: WDC WD25 Model: 00BB-98GUA0 Rev: 08.0
    Type: Direct-Access ANSI SCSI revision: 02

    --------------------------------------------------------------

    CPU0
    0: 120898 IO-APIC-edge timer
    1: 8 IO-APIC-edge i8042
    8: 0 IO-APIC-edge rtc
    14: 6971 IO-APIC-edge ide0
    15: 54 IO-APIC-edge ide1
    16: 0 IO-APIC-level uhci_hcd
    18: 0 IO-APIC-level uhci_hcd
    19: 0 IO-APIC-level uhci_hcd
    20: 1031 IO-APIC-level eth0, Skystar2
    22: 49821 IO-APIC-level acpi, saa7146 (0)
    23: 24 IO-APIC-level ehci_hcd
    NMI: 0
    LOC: 120830
    ERR: 0
    MIS: 0

    --------------------------------------------------------------

    00:00.0 Host bridge: Intel Corp.: Unknown device 2560 (rev 03)
    00:01.0 PCI bridge: Intel Corp.: Unknown device 2561 (rev 03)
    00:1d.0 USB Controller: Intel Corp.: Unknown device 24c2 (rev 02)
    00:1d.1 USB Controller: Intel Corp.: Unknown device 24c4 (rev 02)
    00:1d.2 USB Controller: Intel Corp.: Unknown device 24c7 (rev 02)
    00:1d.7 USB Controller: Intel Corp.: Unknown device 24cd (rev 02)
    00:1e.0 PCI bridge: Intel Corp. 82820 820 (Camino 2) Chipset PCI (rev 82)
    00:1f.0 ISA bridge: Intel Corp.: Unknown device 24c0 (rev 02)
    00:1f.1 IDE interface: Intel Corp.: Unknown device 24cb (rev 02)
    00:1f.3 SMBus: Intel Corp.: Unknown device 24c3 (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corp.: Unknown device 24c5 (rev 02)
    02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
    02:09.0 VGA compatible controller: ATI Technologies Inc 264VT [Mach64 VT] (rev 40)
    02:0a.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
    02:0c.0 Network controller: Techsan Electronics Co Ltd: Unknown device 2103 (rev 02)

    --------------------------------------------------------------


    Disk /dev/hda: 16 heads, 63 sectors, 8354 cylinders
    Units = cylinders of 1008 * 512 bytes


    Device Boot Start End Blocks Id System
    /dev/hda1 * 1 8352 4208998+ 83 Linux
    Partition 1 does not end on cylinder boundary:
    phys=(523, 254, 63) should be (523, 15, 63)


    Disk /dev/hdb: 255 heads, 63 sectors, 19929 cylinders
    Units = cylinders of 16065 * 512 bytes


    Device Boot Start End Blocks Id System
    /dev/hdb1 * 1 19929 160079661 83 Linux

    --------------------------------------------------------------


    [/list=4]



    An der Hardware oder so habe ich nichts geändert, wenn ich den Kernel wieder deinstalliere, ist alles wieder "normal".

    Vielen Dank für die Hilfe.



    Zitat

    Original von DarkAngel
    Hallo mostho!


    Das hatten wir nun schon ein paar mal. :)
    Einfach noch das Modul sd_mod laden.


    Hmm, als Hilfe fürs nächste Mal, was wären denn sinnvolle Suchbegriffe gewesen um das selbst zu finden?



    apt-get geht, apt-cache crasht, (bis jetzt zumindest) immer an der selben Stelle: package: rotor (oder danach eben).



    Ach ja, die externe Harddisk geht nun, aber die Fehlermeldung (PCI: Cannot allocate resource region 4 of device ...) bleibt. Mir ist zwar (seit Laden von sd_mod) noch kein Fehlverhalten aufgefallen, aber grundlos wird sie auch nicht kommen, oder?

    Zitat

    Original von mostho
    Hmm, als Hilfe fürs nächste Mal, was wären denn sinnvolle Suchbegriffe gewesen um das selbst zu finden?


    Man kann dazu etwas in diesem Thread auf Seite 4 ungefähr in der Mitte finden.


    Zitat

    apt-get geht, apt-cache crasht, (bis jetzt zumindest) immer an der selben Stelle: package: rotor (oder danach eben).


    Tja, da hab ich keinen Plan, warum das passiert.


    Zitat

    Ach ja, die externe Harddisk geht nun, aber die Fehlermeldung (PCI: Cannot allocate resource region 4 of device ...) bleibt. Mir ist zwar (seit Laden von sd_mod) noch kein Fehlverhalten aufgefallen, aber grundlos wird sie auch nicht kommen, oder?


    Ich weiß auch nicht, was der Fehler bedeutet. Jedenfalls scheint es sich auf den SMBus zu beziehen.


    Gruß,


    Marcus

    DarkAngel
    Hi,
    wie sieht es mit DXR3 aus?
    Gruß
    Dejuh

    Server-3000-AMD-64bit-1536mbRam- Suse-10.0-DHCP-TFTP-PHP-Apache-VDR-1.3.43-2x DVB-S-TT-1.3 und 2x NOVA-S-250GB-250GB für Video
    Bose-Zenega-Xine
    Client mit Epia-DXR3-Lüfterlos und Linvdr mit vdr-1.3.27
    DVD-Wechsler ......zu sehen auf meiner HP
    VDR-Touch-Control mit DXR3 und Linvdr-1.3.27
    2x Mediamvp

    Hallo Experten,


    habe mir auch grad mal den Update eingespielt und laufe auch auf den Fehler, dass kein Device mehr gefunden wird.


    Ich habe makedev-dvb.sh ausgeführt und und die Files haben auch die Nummer 212.
    Und im runvdr steht bei MODULES auch ves1x93 drin. Mehr finde ich dazu über die Suchfunktion leider nicht. Weiß jemand noch Rat?


    Danke schonmal!!!


    Michael


    Hardware: ABIT KT7-RAID, Athlon900, 80GB HDD, 256 MB RAM, DVB-S Rev.1.3, DVD-LW, 40x4 LCD blau inv., Zoltrix Nightingale mit opt. Modul, 10/100/1000 Ethernet, Verax-Lüfter für Netzteil, CPU und Gehäuse


    Gehäuse: Scenic Desktop mit Alu-Verkleidung (geschliffen, natur eloxiert)


    Software: LinVDR 0.6, VDR 1.3.11

    Zitat

    Original von LuusL
    DarkAngel könnest Du für mich den Kernel nochmal mit den ISA Soundmodulen für eine Yamaha OPL3-SA2/SA3 Karte übersetzen und mir die Module dann bereitstellen?


    Ist dann im nächsten Kernel-Package mit drin, noch etwas Geduld.


    Zitat

    Original von Dejuh
    wie sieht es mit DXR3 aus?


    Ganz gut, denke ich. -> :suche -> hier


    Zitat

    Original von jobaka
    habe mir auch grad mal den Update eingespielt und laufe auch auf den Fehler, dass kein Device mehr gefunden wird.
    ...
    Oct 31 14:58:18 vdr syslog.warn klogd: videodev: "av7110" has no release callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/


    Ich würde jetzt mal behaupten, daß da noch der alte Kernel läuft. Bitte mal mit "uname -r" überprüfen.


    Gruß,


    Marcus

    Hallo,
    nach dem Versuch des Kernel updates auf 2.6.8 gibst es gleich vor der grünen Linie den ersten ERROR:
    PCI:_ Cannot allocate resource region 4 off device 0000:00:1f.3


    Logread gibt dann folgendes aus:


    Oct 31 17:46:06 linvdr syslog.info syslogd started: BusyBox v1.00-pre8 (2004.03.02-16:27+0000)
    Oct 31 17:46:06 linvdr syslog.warn klogd: Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Oct 31 17:46:06 linvdr syslog.warn klogd: Calibrating delay loop... 3981.31 BogoMIPS
    Oct 31 17:46:06 linvdr syslog.warn klogd: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Oct 31 17:46:06 linvdr syslog.debug klogd: CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
    Oct 31 17:46:06 linvdr syslog.debug klogd: CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
    Oct 31 17:46:06 linvdr syslog.info klogd: CPU: Trace cache: 12K uops, L1 D cache: 8K
    Oct 31 17:46:06 linvdr syslog.info klogd: CPU: L2 cache: 128K
    Oct 31 17:46:06 linvdr syslog.debug klogd: CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
    Oct 31 17:46:06 linvdr syslog.info klogd: Intel machine check architecture supported.
    Oct 31 17:46:06 linvdr syslog.info klogd: Intel machine check reporting enabled on CPU#0.
    Oct 31 17:46:06 linvdr syslog.info klogd: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
    Oct 31 17:46:06 linvdr syslog.warn klogd: CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 09
    Oct 31 17:46:06 linvdr syslog.info klogd: Enabling fast FPU save and restore... done.
    Oct 31 17:46:06 linvdr syslog.info klogd: Enabling unmasked SIMD FPU exception support... done.
    Oct 31 17:46:06 linvdr syslog.info klogd: Checking 'hlt' instruction... OK.
    Oct 31 17:46:06 linvdr syslog.warn klogd: enabled ExtINT on CPU#0
    Oct 31 17:46:06 linvdr syslog.warn klogd: ESR value before enabling vector: 00000000
    Oct 31 17:46:06 linvdr syslog.warn klogd: ESR value after enabling vector: 00000000
    Oct 31 17:46:06 linvdr syslog.warn klogd: ENABLING IO-APIC IRQs
    Oct 31 17:46:06 linvdr syslog.debug klogd: init IO_APIC IRQs
    Oct 31 17:46:06 linvdr syslog.debug klogd: IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-23 not connected.
    Oct 31 17:46:06 linvdr syslog.info klogd: ..TIMER: vector=0x31 pin1=2 pin2=-1
    Oct 31 17:46:06 linvdr syslog.warn klogd: Using local APIC timer interrupts.
    Oct 31 17:46:06 linvdr syslog.warn klogd: calibrating APIC timer ...
    Oct 31 17:46:06 linvdr syslog.warn klogd: ..... CPU clock speed is 2017.0748 MHz.
    Oct 31 17:46:06 linvdr syslog.warn klogd: ..... host bus clock speed is 100.0887 MHz.
    Oct 31 17:46:06 linvdr syslog.info klogd: NET: Registered protocol family 16
    Oct 31 17:46:06 linvdr syslog.info klogd: PCI: PCI BIOS revision 2.10 entry at 0xf1090, last bus=2
    Oct 31 17:46:06 linvdr syslog.info klogd: PCI: Using configuration type 1
    Oct 31 17:46:06 linvdr syslog.info klogd: mtrr: v2.0 (20020519)
    Oct 31 17:46:06 linvdr syslog.info klogd: revision 20040816
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: Interpreter enabled
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: Using IOAPIC for interrupt routing
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI Root Bridge [PCI0] (00:00)
    Oct 31 17:46:06 linvdr syslog.warn klogd: PCI: Probing PCI hardware (bus 00)
    Oct 31 17:46:06 linvdr syslog.info klogd: PCI: Enabled i801 SMBus device
    Oct 31 17:46:06 linvdr syslog.info klogd: PCI: Transparent bridge - 0000:00:1e.0
    Oct 31 17:46:06 linvdr syslog.debug klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    Oct 31 17:46:06 linvdr syslog.debug klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    Oct 31 17:46:06 linvdr syslog.debug klogd: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
    Oct 31 17:46:06 linvdr syslog.info klogd: Linux Plug and Play Support v0.97 (c) Adam Belay
    Oct 31 17:46:06 linvdr syslog.info klogd: usbcore: registered new driver usbfs
    Oct 31 17:46:06 linvdr syslog.info klogd: usbcore: registered new driver hub
    Oct 31 17:46:06 linvdr syslog.info klogd: PCI: Using ACPI for IRQ routing
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 21 (level, low) -> IRQ 21
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
    Oct 31 17:46:06 linvdr syslog.debug klogd: number of MP IRQ sources: 16.
    Oct 31 17:46:06 linvdr syslog.debug klogd: number of IO-APIC #2 registers: 24.
    Oct 31 17:46:06 linvdr syslog.info klogd: testing the IO APIC.......................
    Oct 31 17:46:06 linvdr syslog.debug klogd: IO APIC #2......
    Oct 31 17:46:06 linvdr syslog.debug klogd: .... register #00: 02000000
    Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : physical APIC id: 02
    Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : Delivery Type: 0
    Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : LTS : 0
    Oct 31 17:46:06 linvdr syslog.debug klogd: .... register #01: 00178020
    Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : max redirection entries: 0017
    Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : PRQ implemented: 1
    Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : IO APIC version: 0020
    Oct 31 17:46:06 linvdr syslog.debug klogd: .... register #02: 00000000
    Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : arbitration: 00
    Oct 31 17:46:06 linvdr syslog.debug klogd: .... register #03: 00000001
    Oct 31 17:46:06 linvdr syslog.debug klogd: ....... : Boot DT : 1
    Oct 31 17:46:06 linvdr syslog.debug klogd: .... IRQ redirection table:
    Oct 31 17:46:06 linvdr syslog.debug klogd: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    Oct 31 17:46:06 linvdr syslog.debug klogd: 00 000 00 1 0 0 0 0 0 0 00
    Oct 31 17:46:06 linvdr syslog.debug klogd: 01 001 01 0 0 0 0 0 1 1 39
    Oct 31 17:46:06 linvdr syslog.debug klogd: 02 001 01 0 0 0 0 0 1 1 31
    Oct 31 17:46:06 linvdr syslog.debug klogd: 03 001 01 0 0 0 0 0 1 1 41
    Oct 31 17:46:06 linvdr syslog.debug klogd: 04 001 01 0 0 0 0 0 1 1 49
    Oct 31 17:46:06 linvdr syslog.debug klogd: 05 001 01 0 0 0 0 0 1 1 51
    Oct 31 17:46:06 linvdr syslog.debug klogd: 06 001 01 0 0 0 0 0 1 1 59
    Oct 31 17:46:06 linvdr syslog.debug klogd: 07 001 01 0 0 0 0 0 1 1 61
    Oct 31 17:46:06 linvdr syslog.debug klogd: 08 001 01 0 0 0 0 0 1 1 69
    Oct 31 17:46:06 linvdr syslog.debug klogd: 09 001 01 0 0 0 0 0 1 1 71
    Oct 31 17:46:06 linvdr syslog.debug klogd: 0a 001 01 0 0 0 0 0 1 1 79
    Oct 31 17:46:06 linvdr syslog.debug klogd: 0b 001 01 0 0 0 0 0 1 1 81
    Oct 31 17:46:06 linvdr syslog.debug klogd: 0c 001 01 0 0 0 0 0 1 1 89
    Oct 31 17:46:06 linvdr syslog.debug klogd: 0d 001 01 0 0 0 0 0 1 1 91
    Oct 31 17:46:06 linvdr syslog.debug klogd: 0e 001 01 0 0 0 0 0 1 1 99
    Oct 31 17:46:06 linvdr syslog.debug klogd: 0f 001 01 0 0 0 0 0 1 1 A1
    Oct 31 17:46:06 linvdr syslog.debug klogd: 10 001 01 1 1 0 1 0 1 1 C9
    Oct 31 17:46:06 linvdr syslog.debug klogd: 11 001 01 1 1 0 1 0 1 1 B9
    Oct 31 17:46:06 linvdr syslog.debug klogd: 12 001 01 1 1 0 1 0 1 1 E1
    Oct 31 17:46:06 linvdr syslog.debug klogd: 13 001 01 1 1 0 1 0 1 1 B1
    Oct 31 17:46:06 linvdr syslog.debug klogd: 14 001 01 1 1 0 1 0 1 1 D9
    Oct 31 17:46:06 linvdr syslog.debug klogd: 15 001 01 1 1 0 1 0 1 1 D1
    Oct 31 17:46:06 linvdr syslog.debug klogd: 16 001 01 0 1 0 1 0 1 1 A9
    Oct 31 17:46:06 linvdr syslog.debug klogd: 17 001 01 1 1 0 1 0 1 1 C1
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ to pin mappings:
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ0 -> 0:2
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ1 -> 0:1
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ3 -> 0:3
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ4 -> 0:4
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ5 -> 0:5
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ6 -> 0:6
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ7 -> 0:7
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ8 -> 0:8
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ9 -> 0:9
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ10 -> 0:10
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ11 -> 0:11
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ12 -> 0:12
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ13 -> 0:13
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ14 -> 0:14
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ15 -> 0:15
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ16 -> 0:16
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ17 -> 0:17
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ18 -> 0:18
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ19 -> 0:19
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ20 -> 0:20
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ21 -> 0:21
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ22 -> 0:22
    Oct 31 17:46:06 linvdr syslog.debug klogd: IRQ23 -> 0:23
    Oct 31 17:46:06 linvdr syslog.info klogd: .................................... done.
    Oct 31 17:46:06 linvdr syslog.err klogd: 0:00:1f.3
    Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: framebuffer at 0xf4000000, mapped to 0xe0809000, size 1875k
    Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: mode is 800x600x16, linelength=1600, pages=67
    Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: protected mode interface info at c000:56aa
    Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: scrolling: redraw
    Oct 31 17:46:06 linvdr syslog.info klogd: vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
    Oct 31 17:46:06 linvdr syslog.info klogd: fb0: VESA VGA frame buffer device
    Oct 31 17:46:06 linvdr syslog.info klogd: Simple Boot Flag at 0x3a set to 0x1
    Oct 31 17:46:06 linvdr syslog.info klogd: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
    Oct 31 17:46:06 linvdr syslog.info klogd: devfs: boot_options: 0x0
    Oct 31 17:46:06 linvdr syslog.info klogd: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Oct 31 17:46:06 linvdr syslog.info klogd: NTFS driver 2.1.15 [Flags: R/W].
    Oct 31 17:46:06 linvdr syslog.notice klogd: udf: registering filesystem
    Oct 31 17:46:06 linvdr syslog.info klogd: Initializing Cryptographic API
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: Power Button (FF) [PWRF]
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: Processor [CPU] (supports C1)
    Oct 31 17:46:06 linvdr syslog.info klogd: isapnp: Scanning for PnP cards...
    Oct 31 17:46:06 linvdr syslog.info klogd: isapnp: No Plug & Play device found
    Oct 31 17:46:06 linvdr syslog.warn klogd: Console: switching to colour frame buffer device 100x37
    Oct 31 17:46:06 linvdr syslog.info klogd: Real Time Clock Driver v1.12
    Oct 31 17:46:06 linvdr syslog.info klogd: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    Oct 31 17:46:06 linvdr syslog.warn klogd: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    Oct 31 17:46:06 linvdr syslog.warn klogd: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    Oct 31 17:46:06 linvdr syslog.warn klogd: Using anticipatory io scheduler
    Oct 31 17:46:06 linvdr syslog.warn klogd: floppy0: no floppy controllers found
    Oct 31 17:46:06 linvdr syslog.info klogd: loop: loaded (max 8 devices)
    Oct 31 17:46:06 linvdr syslog.info klogd: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Oct 31 17:46:06 linvdr syslog.info klogd: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Oct 31 17:46:06 linvdr syslog.info klogd: ICH2: IDE controller at PCI slot 0000:00:1f.1
    Oct 31 17:46:06 linvdr syslog.info klogd: ICH2: chipset revision 5
    Oct 31 17:46:06 linvdr syslog.info klogd: ICH2: not 100% native mode: will probe irqs later
    Oct 31 17:46:06 linvdr syslog.info klogd: ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:pio
    Oct 31 17:46:06 linvdr syslog.info klogd: ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA
    Oct 31 17:46:06 linvdr syslog.warn klogd: hda: SAMSUNG SP1604N, ATA DISK drive
    Oct 31 17:46:06 linvdr syslog.warn klogd: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Oct 31 17:46:06 linvdr syslog.warn klogd: hdc: PHILIPS DVDRW228, ATAPI CD/DVD-ROM drive
    Oct 31 17:46:06 linvdr syslog.warn klogd: hdd: SAMSUNG SP1604N, ATA DISK drive
    Oct 31 17:46:06 linvdr syslog.warn klogd: ide1 at 0x170-0x177,0x376 on irq 15
    Oct 31 17:46:06 linvdr syslog.warn klogd: hda: max request size: 1024KiB
    Oct 31 17:46:06 linvdr syslog.info klogd: hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
    Oct 31 17:46:06 linvdr syslog.info klogd: /dev/ide/host0/bus0/target0/lun0: p1
    Oct 31 17:46:06 linvdr syslog.warn klogd: hdd: max request size: 1024KiB
    Oct 31 17:46:06 linvdr syslog.info klogd: hdd: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
    Oct 31 17:46:06 linvdr syslog.info klogd: /dev/ide/host0/bus1/target1/lun0: unknown partition table
    Oct 31 17:46:06 linvdr syslog.warn klogd: hdc: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Oct 31 17:46:06 linvdr syslog.info klogd: Uniform CD-ROM driver Revision: 3.20
    Oct 31 17:46:06 linvdr syslog.info klogd: mice: PS/2 mouse device common for all mice
    Oct 31 17:46:06 linvdr syslog.info klogd: serio: i8042 AUX port at 0x60,0x64 irq 12
    Oct 31 17:46:06 linvdr syslog.info klogd: serio: i8042 KBD port at 0x60,0x64 irq 1
    Oct 31 17:46:06 linvdr syslog.info klogd: input: AT Translated Set 2 keyboard on isa0060/serio0
    Oct 31 17:46:06 linvdr syslog.info klogd: NET: Registered protocol family 2
    Oct 31 17:46:06 linvdr syslog.info klogd: IP: routing cache hash table of 4096 buckets, 32Kbytes
    Oct 31 17:46:06 linvdr syslog.info klogd: TCP: Hash tables configured (established 32768 bind 32768)
    Oct 31 17:46:06 linvdr syslog.info klogd: NET: Registered protocol family 1
    Oct 31 17:46:06 linvdr syslog.info klogd: NET: Registered protocol family 17
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: (supports S0 S1 S4 S5)
    Oct 31 17:46:06 linvdr syslog.warn klogd: ACPI wakeup devices:
    Oct 31 17:46:06 linvdr syslog.warn klogd: PCI0 PCI1 PCI2 USB0 USB1
    Oct 31 17:46:06 linvdr syslog.info klogd: EXT3-fs: INFO: recovery required on readonly filesystem.
    Oct 31 17:46:06 linvdr syslog.info klogd: EXT3-fs: write access will be enabled during recovery.
    Oct 31 17:46:06 linvdr syslog.info klogd: kjournald starting. Commit interval 5 seconds
    Oct 31 17:46:06 linvdr syslog.info klogd: EXT3-fs: recovery complete.
    Oct 31 17:46:06 linvdr syslog.info klogd: EXT3-fs: mounted filesystem with ordered data mode.
    Oct 31 17:46:06 linvdr syslog.warn klogd: VFS: Mounted root (ext3 filesystem) readonly.
    Oct 31 17:46:06 linvdr syslog.info klogd: Freeing unused kernel memory: 156k freed
    Oct 31 17:46:06 linvdr syslog.info klogd: EXT3 FS on hda1, internal journal
    Oct 31 17:46:06 linvdr syslog.warn klogd: cdfs 2.6.3a loaded.
    Oct 31 17:46:06 linvdr syslog.info klogd: USB Universal Host Controller Interface driver v2.2
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 19
    Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.2: Intel Corp. 82801BA/BAM USB (Hub #1)
    Oct 31 17:46:06 linvdr syslog.debug klogd: PCI: Setting latency timer of device 0000:00:1f.2 to 64
    Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.2: irq 19, io base 0000a400
    Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
    Oct 31 17:46:06 linvdr syslog.info klogd: hub 1-0:1.0: USB hub found
    Oct 31 17:46:06 linvdr syslog.info klogd: hub 1-0:1.0: 2 ports detected
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 23
    Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.4: Intel Corp. 82801BA/BAM USB (Hub #2)
    Oct 31 17:46:06 linvdr syslog.debug klogd: PCI: Setting latency timer of device 0000:00:1f.4 to 64
    Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.4: irq 23, io base 0000a000
    Oct 31 17:46:06 linvdr syslog.info klogd: uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
    Oct 31 17:46:06 linvdr syslog.info klogd: hub 2-0:1.0: USB hub found
    Oct 31 17:46:06 linvdr syslog.info klogd: hub 2-0:1.0: 2 ports detected
    Oct 31 17:46:06 linvdr syslog.info klogd: Adding 262136k swap on /var/vm/swapfile. Priority:-1 extents:67
    Oct 31 17:46:06 linvdr syslog.info klogd: natsemi dp8381x driver, version 1.07+LK1.0.18, Oct 23, 2003
    Oct 31 17:46:06 linvdr syslog.info klogd: originally by Donald Becker <becker@scyld.com>
    Oct 31 17:46:06 linvdr syslog.info klogd: http://www.scyld.com/network/natsemi.html
    Oct 31 17:46:06 linvdr syslog.info klogd: 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
    Oct 31 17:46:06 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
    Oct 31 17:46:06 linvdr syslog.info klogd: , port TP.
    Oct 31 17:46:06 linvdr local0.info udhcpc[1303]: udhcpc (v0.9.9-pre) started
    Oct 31 17:46:06 linvdr syslog.info klogd: eth0: DSPCFG accepted after 0 usec.
    Oct 31 17:46:06 linvdr syslog.notice klogd: eth0: link up.
    Oct 31 17:46:06 linvdr syslog.info klogd: eth0: Setting full-duplex based on negotiated link capability.
    Oct 31 17:46:06 linvdr local0.debug udhcpc[1303]: Sending discover...
    Oct 31 17:46:06 linvdr local0.debug udhcpc[1303]: Sending select for 192.168.2.151...
    Oct 31 17:46:06 linvdr local0.info udhcpc[1303]: Lease of 192.168.2.151 obtained, lease time 1073741823
    Oct 31 17:46:06 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Oct 31 17:46:06 linvdr auth.info sshd[1332]: Server listening on 0.0.0.0 port 22.
    Oct 31 17:46:07 linvdr syslog.warn klogd: saa7146: register extension 'dvb'.
    Oct 31 17:46:07 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
    Oct 31 17:46:07 linvdr syslog.warn klogd: found saa7146 @ mem e0ae0000 (revision 1, irq 22) (0x13c2,0x0000).
    Oct 31 17:46:07 linvdr syslog.warn klogd: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
    Oct 31 17:46:08 linvdr daemon.info init: Starting pid 1397, console /dev/tty1: '/sbin/getty'
    Oct 31 17:46:08 linvdr daemon.info init: Starting pid 1398, console /dev/tty2: '/sbin/getty'
    Oct 31 17:46:08 linvdr daemon.info init: Starting pid 1404, console /dev/tty3: '/sbin/getty'
    Oct 31 17:46:08 linvdr syslog.warn klogd: stv0299: try to attach to Siemens/Technotrend/Hauppauge PCI rev1.3
    Oct 31 17:46:08 linvdr daemon.info init: Starting pid 1410, console /dev/tty4: '/sbin/getty'
    Oct 31 17:46:08 linvdr syslog.warn klogd: stv0299: setup for tuner BSRU6, TDQB-S00x
    Oct 31 17:46:08 linvdr syslog.warn klogd: DVB: registering frontend 0 (STV0299/TSA5059/SL1935 based)...
    Oct 31 17:46:09 linvdr syslog.err klogd: mt312_read: ret == -121
    Oct 31 17:46:09 linvdr syslog.warn klogd: adapter has MAC addr = 00:d0:5c:03:e4:30
    Oct 31 17:46:09 linvdr syslog.warn klogd: gpioirq unknown type=0 len=0
    Oct 31 17:46:09 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
    Oct 31 17:46:09 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Oct 31 17:46:09 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Oct 31 17:46:09 linvdr syslog.warn klogd: saa7146 (0): registered device video0 [v4l2]
    Oct 31 17:46:09 linvdr syslog.info klogd: av7110: found av7110-0.
    Oct 31 17:46:10 linvdr syslog.warn klogd: saa7146: register extension 'budget dvb'.
    Oct 31 17:46:10 linvdr syslog.warn klogd: saa7146: register extension 'budget_ci dvb'.
    Oct 31 17:46:10 linvdr syslog.warn klogd: saa7146: register extension 'budget dvb /w video in'.
    Oct 31 17:46:10 linvdr syslog.warn klogd: lirc_dev: IR Remote Control driver registered, at major 61
    Oct 31 17:46:11 linvdr syslog.info klogd: lirc_serial: auto-detected active high receiver
    Oct 31 17:46:11 linvdr syslog.warn klogd: lirc_dev: lirc_register_plugin:sample_rate: 0
    Oct 31 17:46:11 linvdr user.info vdr[1564]: VDR version 1.3.12 started
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-extb.so.1.3.12
    Oct 31 17:46:11 linvdr user.debug vdr[1578]: extb: cLirc thread started (pid=1578)
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-image.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-vdrcd.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.3.12
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/setup.conf
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrBackground = -2013265920
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrChannelName = -2013265920
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrChannelNum = -1996488705
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrEpgData = -2013265920
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrEpgTime = -2013265920
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrHelpBlue = -3407872
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrHelpGreen = -14496734
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrHelpRed = -15658548
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrHelpYellow = -14500916
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrScrolLine = -256
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: BgClrTitleLine = -256
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: CaCaps = 5 101
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrChannelname = 1
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrChannelnum = 1
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrDateTime = 1
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrEpgTime = 4
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrMenuFont = 1
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrScrolLine = 0
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrSubTitle = 7
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrSymbolOff = 8
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrSymbolOn = 4
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrTimeBar1 = 0
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrTimeBar2 = 8
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrTitle = 7
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrTitleLine = 0
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ClrVolumeBar = 3
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: MainMenuStyle = 1
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ProgressBar = 1
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: ShowWeekdays = 0
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: SmallFonts = 1
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: Style = 0
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: Symbol = 1
    Oct 31 17:46:11 linvdr user.err vdr[1564]: ERROR: unknown config parameter: TimeBar = 1
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/sources.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/diseqc.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/channels.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/timers.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/commands.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/reccmds.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/svdrphosts.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/ca.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/remote.conf
    Oct 31 17:46:11 linvdr user.info vdr[1564]: loading /etc/vdr/keymacros.conf
    Oct 31 17:46:11 linvdr user.debug vdr[1564]: reading EPG data from /ramdisk/epg.data
    Oct 31 17:46:11 linvdr user.debug vdr[1564]: probing /dev/dvb/adapter0/frontend0
    Oct 31 17:46:11 linvdr user.debug vdr[1581]: tuner on device 1 thread started (pid=1581, tid=2051)
    Oct 31 17:46:11 linvdr user.debug vdr[1582]: Section handler thread started (pid=1582, tid=3076)
    Oct 31 17:46:11 linvdr user.debug vdr[1564]: probing /dev/dvb/adapter1/frontend0
    Oct 31 17:46:11 linvdr user.info vdr[1564]: found 1 video device
    Oct 31 17:46:11 linvdr user.info vdr[1564]: initializing plugin: dvd (0.3.5-b06): A full featured DVD Player
    Oct 31 17:46:11 linvdr user.info vdr[1564]: initializing plugin: extb (0.2.7): control the extb board
    Oct 31 17:46:11 linvdr user.debug vdr[1564]: extb: cLirc::open (fd=19)
    Oct 31 17:46:11 linvdr user.debug vdr[1564]: extb: cExtBLircWatch::open(fd=20)
    Oct 31 17:46:11 linvdr user.debug vdr[1583]: extb: cExtBLircWatch thread started (pid=1583)
    Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: image (0.1.1): A Image Viewer plugin
    Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: mp3 (0.9.3): A versatile audio player
    Oct 31 17:46:12 linvdr user.info vdr[1564]: loading /etc/vdr/plugins/mp3sources.conf
    Oct 31 17:46:12 linvdr user.info vdr[1564]: loading id3 cache from /video0/id3info.cache
    Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: mplayer (0.9.3): Media replay via MPlayer
    Oct 31 17:46:12 linvdr user.info vdr[1564]: loading /etc/vdr/plugins/mplayersources.conf
    Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: sleeptimer (0.4): Sleep-Timer for VDR
    Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: vcd (0.0.6c): VideoCD Player
    Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: vdrcd (0.0.10): Plays identified Media Discs (for autofs)
    Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: graphlcd (0.1.1-pre1): Output to graphic LCD
    Oct 31 17:46:12 linvdr user.info vdr[1564]: initializing plugin: osdteletext (0.4): Displays teletext on the OSD
    Oct 31 17:46:12 linvdr user.info vdr[1564]: setting primary device to 1
    Oct 31 17:46:12 linvdr user.info vdr[1564]: SVDRP listening on port 2001
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: dvd
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: extb
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: image
    Oct 31 17:46:12 linvdr user.info vdr[1564]: loading /etc/vdr/plugins/imagesources.conf
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: mp3
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: mplayer
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: sleeptimer
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: vcd
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: vdrcd
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: graphlcd
    Oct 31 17:46:12 linvdr user.debug vdr[1584]: graphlcd plugin: Display update thread started (pid=1584)
    Oct 31 17:46:12 linvdr user.debug vdr[1584]: graphlcd plugin: Testing ECP mode...
    Oct 31 17:46:12 linvdr user.debug vdr[1584]: graphlcd plugin: working!
    Oct 31 17:46:12 linvdr user.info vdr[1564]: starting plugin: osdteletext
    Oct 31 17:46:12 linvdr user.info vdr[1564]: loading /etc/vdr/themes/sttng-default.theme
    Oct 31 17:46:12 linvdr user.debug vdr[1585]: LIRC remote control thread started (pid=1585, tid=6151)
    Oct 31 17:46:12 linvdr user.debug vdr[1586]: KBD remote control thread started (pid=1586, tid=7176)
    Oct 31 17:46:12 linvdr user.debug vdr[1564]: remote control LIRC - keys known
    Oct 31 17:46:12 linvdr user.debug vdr[1564]: remote control KBD - keys known
    Oct 31 17:46:12 linvdr user.info vdr[1564]: switching to channel 2
    Oct 31 17:46:12 linvdr user.info vdr[1584]: graphlcd plugin: T6963 initialized.
    Oct 31 17:46:12 linvdr user.debug vdr[1564]: creating directory /ramdisk/vtx/S19.2E-1-1079-28006
    Oct 31 17:46:12 linvdr user.debug vdr[1587]: receiver on device 1 thread started (pid=1587, tid=8201)
    Oct 31 17:46:12 linvdr user.debug vdr[1564]: setting watchdog timer to 900 seconds
    Oct 31 17:46:12 linvdr user.info vdr[1582]: channel 21 (KiKa;ZDFvision) event 15:30 'Tabaluga tivi' status 4
    Oct 31 17:46:13 linvdr user.info vdr[1582]: channel 7 (3sat;ZDFvision) event 16:30 'Von Null auf 42 (3/3)' status 4
    Oct 31 17:46:13 linvdr user.info vdr[1582]: channel 2 (ZDF;ZDFvision) event 15:20 'Vaya con dios' status 4
    Oct 31 17:46:13 linvdr user.info vdr[1582]: channel 13 (Eurosport;ZDFvision) event 16:30 'Fußball' status 4
    Oct 31 17:46:13 linvdr user.info vdr[1582]: channel 25 (ZDFinfokanal;ZDFvision) event 16:45 'form & funktion' status 4
    Oct 31 17:46:17 linvdr user.info vdr[1564]: connect from 127.0.0.1, port 32768 - accepted
    Oct 31 17:46:18 linvdr user.debug vdr[1564]: max. latency time 1 seconds
    Oct 31 17:46:19 linvdr user.info vdr[1564]: closing SVDRP connection
    Oct 31 17:46:19 linvdr user.debug vdr[1564]: assuming manual start of VDR
    Oct 31 17:47:55 linvdr auth.info login[1397]: root login on `tty1'



    Reboot geht auch nicht mehr es wird zwar der VDR gestoppt aber bei restarting system
    friert der Rechner ein. Nachdem ich den Rechner aus- und wieder eingeschaltet habe gibt logread dann folgendes aus.




    Oct 31 17:51:11 linvdr syslog.info syslogd started: BusyBox v1.00-pre8 (2004.03.02-16:27+0000)
    Oct 31 17:51:11 linvdr syslog.info klogd: natsemi dp8381x driver, version 1.07+LK1.0.18, Oct 23, 2003
    Oct 31 17:51:11 linvdr syslog.info klogd: originally by Donald Becker <becker@scyld.com>
    Oct 31 17:51:11 linvdr syslog.info klogd: http://www.scyld.com/network/natsemi.html
    Oct 31 17:51:11 linvdr syslog.info klogd: 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
    Oct 31 17:51:11 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
    Oct 31 17:51:11 linvdr syslog.info klogd: , port TP.
    Oct 31 17:51:11 linvdr local0.info udhcpc[1315]: udhcpc (v0.9.9-pre) started
    Oct 31 17:51:11 linvdr syslog.info klogd: eth0: DSPCFG accepted after 0 usec.
    Oct 31 17:51:11 linvdr syslog.notice klogd: eth0: link up.
    Oct 31 17:51:11 linvdr syslog.info klogd: eth0: Setting full-duplex based on negotiated link capability.
    Oct 31 17:51:11 linvdr local0.debug udhcpc[1315]: Sending discover...
    Oct 31 17:51:11 linvdr local0.debug udhcpc[1315]: Sending select for 192.168.2.151...
    Oct 31 17:51:11 linvdr local0.info udhcpc[1315]: Lease of 192.168.2.151 obtained, lease time 1073741823
    Oct 31 17:51:11 linvdr syslog.info klogd: Linux video capture interface: v1.00
    Oct 31 17:51:11 linvdr auth.info sshd[1343]: Server listening on 0.0.0.0 port 22.
    Oct 31 17:51:12 linvdr syslog.warn klogd: saa7146: register extension 'dvb'.
    Oct 31 17:51:12 linvdr syslog.info klogd: ACPI: PCI interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
    Oct 31 17:51:12 linvdr syslog.warn klogd: found saa7146 @ mem e0ae0000 (revision 1, irq 22) (0x13c2,0x0000).
    Oct 31 17:51:12 linvdr syslog.warn klogd: DVB: registering new adapter (Siemens/Technotrend/Hauppauge PCI rev1.3).
    Oct 31 17:51:13 linvdr daemon.info init: Starting pid 1409, console /dev/tty1: '/sbin/getty'
    Oct 31 17:51:13 linvdr daemon.info init: Starting pid 1412, console /dev/tty3: '/sbin/getty'
    Oct 31 17:51:13 linvdr daemon.info init: Starting pid 1410, console /dev/tty2: '/sbin/getty'
    Oct 31 17:51:13 linvdr daemon.info init: Starting pid 1414, console /dev/tty4: '/sbin/getty'
    Oct 31 17:51:13 linvdr syslog.warn klogd: stv0299: try to attach to Siemens/Technotrend/Hauppauge PCI rev1.3
    Oct 31 17:51:13 linvdr syslog.warn klogd: stv0299: setup for tuner BSRU6, TDQB-S00x
    Oct 31 17:51:13 linvdr syslog.warn klogd: DVB: registering frontend 0 (STV0299/TSA5059/SL1935 based)...
    Oct 31 17:51:14 linvdr syslog.err klogd: mt312_read: ret == -121
    Oct 31 17:51:14 linvdr syslog.warn klogd: adapter has MAC addr = 00:d0:5c:03:e4:30
    Oct 31 17:51:14 linvdr syslog.warn klogd: gpioirq unknown type=0 len=0
    Oct 31 17:51:14 linvdr syslog.warn klogd: DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app 8000261c
    Oct 31 17:51:14 linvdr syslog.warn klogd: DVB: AV7110(0) - firmware supports CI link layer interface
    Oct 31 17:51:14 linvdr syslog.warn klogd: av7110(0): Crystal audio DAC detected
    Oct 31 17:51:14 linvdr syslog.warn klogd: saa7146 (0): registered device video0 [v4l2]
    Oct 31 17:51:14 linvdr syslog.info klogd: av7110: found av7110-0.
    Oct 31 17:51:15 linvdr syslog.warn klogd: saa7146: register extension 'budget dvb'.
    Oct 31 17:51:15 linvdr syslog.warn klogd: saa7146: register extension 'budget_ci dvb'.
    Oct 31 17:51:15 linvdr syslog.warn klogd: saa7146: register extension 'budget dvb /w video in'.
    Oct 31 17:51:15 linvdr syslog.warn klogd: lirc_dev: IR Remote Control driver registered, at major 61
    Oct 31 17:51:16 linvdr syslog.info klogd: lirc_serial: auto-detected active high receiver
    Oct 31 17:51:16 linvdr syslog.warn klogd: lirc_dev: lirc_register_plugin:sample_rate: 0
    Oct 31 17:51:16 linvdr user.info vdr[1576]: VDR version 1.3.12 started
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-extb.so.1.3.12
    Oct 31 17:51:16 linvdr user.debug vdr[1588]: extb: cLirc thread started (pid=1588)
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-image.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-mp3.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-mplayer.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-sleeptimer.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-vdrcd.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-graphlcd.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading plugin: /usr/lib/vdr/plugins/libvdr-osdteletext.so.1.3.12
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/setup.conf
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrBackground = -2013265920
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrChannelName = -2013265920
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrChannelNum = -1996488705
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrEpgData = -2013265920
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrEpgTime = -2013265920
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrHelpBlue = -3407872
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrHelpGreen = -14496734
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrHelpRed = -15658548
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrHelpYellow = -14500916
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrScrolLine = -256
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: BgClrTitleLine = -256
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: CaCaps = 5 101
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrChannelname = 1
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrChannelnum = 1
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrDateTime = 1
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrEpgTime = 4
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrMenuFont = 1
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrScrolLine = 0
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrSubTitle = 7
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrSymbolOff = 8
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrSymbolOn = 4
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrTimeBar1 = 0
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrTimeBar2 = 8
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrTitle = 7
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrTitleLine = 0
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ClrVolumeBar = 3
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: MainMenuStyle = 1
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ProgressBar = 1
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: ShowWeekdays = 0
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: SmallFonts = 1
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: Style = 0
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: Symbol = 1
    Oct 31 17:51:16 linvdr user.err vdr[1576]: ERROR: unknown config parameter: TimeBar = 1
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/sources.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/diseqc.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/channels.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/timers.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/commands.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/reccmds.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/svdrphosts.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/ca.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/remote.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/keymacros.conf
    Oct 31 17:51:16 linvdr user.debug vdr[1576]: reading EPG data from /ramdisk/epg.data
    Oct 31 17:51:16 linvdr user.debug vdr[1576]: probing /dev/dvb/adapter0/frontend0
    Oct 31 17:51:16 linvdr user.debug vdr[1593]: tuner on device 1 thread started (pid=1593, tid=2051)
    Oct 31 17:51:16 linvdr user.debug vdr[1594]: Section handler thread started (pid=1594, tid=3076)
    Oct 31 17:51:16 linvdr user.debug vdr[1576]: probing /dev/dvb/adapter1/frontend0
    Oct 31 17:51:16 linvdr user.info vdr[1576]: found 1 video device
    Oct 31 17:51:16 linvdr user.info vdr[1576]: initializing plugin: dvd (0.3.5-b06): A full featured DVD Player
    Oct 31 17:51:16 linvdr user.info vdr[1576]: initializing plugin: extb (0.2.7): control the extb board
    Oct 31 17:51:16 linvdr user.debug vdr[1576]: extb: cLirc::open (fd=19)
    Oct 31 17:51:16 linvdr user.debug vdr[1576]: extb: cExtBLircWatch::open(fd=20)
    Oct 31 17:51:16 linvdr user.debug vdr[1595]: extb: cExtBLircWatch thread started (pid=1595)
    Oct 31 17:51:16 linvdr user.info vdr[1576]: initializing plugin: image (0.1.1): A Image Viewer plugin
    Oct 31 17:51:16 linvdr user.info vdr[1576]: initializing plugin: mp3 (0.9.3): A versatile audio player
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading /etc/vdr/plugins/mp3sources.conf
    Oct 31 17:51:16 linvdr user.info vdr[1576]: loading id3 cache from /video0/id3info.cache
    Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: mplayer (0.9.3): Media replay via MPlayer
    Oct 31 17:51:17 linvdr user.info vdr[1576]: loading /etc/vdr/plugins/mplayersources.conf
    Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: sleeptimer (0.4): Sleep-Timer for VDR
    Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: vcd (0.0.6c): VideoCD Player
    Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: vdrcd (0.0.10): Plays identified Media Discs (for autofs)
    Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: graphlcd (0.1.1-pre1): Output to graphic LCD
    Oct 31 17:51:17 linvdr user.info vdr[1576]: initializing plugin: osdteletext (0.4): Displays teletext on the OSD
    Oct 31 17:51:17 linvdr user.info vdr[1576]: setting primary device to 1
    Oct 31 17:51:17 linvdr user.info vdr[1576]: SVDRP listening on port 2001
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: dvd
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: extb
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: image
    Oct 31 17:51:17 linvdr user.info vdr[1576]: loading /etc/vdr/plugins/imagesources.conf
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: mp3
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: mplayer
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: sleeptimer
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: vcd
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: vdrcd
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: graphlcd
    Oct 31 17:51:17 linvdr user.debug vdr[1596]: graphlcd plugin: Display update thread started (pid=1596)
    Oct 31 17:51:17 linvdr user.debug vdr[1596]: graphlcd plugin: Testing ECP mode...
    Oct 31 17:51:17 linvdr user.debug vdr[1596]: graphlcd plugin: working!
    Oct 31 17:51:17 linvdr user.info vdr[1576]: starting plugin: osdteletext
    Oct 31 17:51:17 linvdr user.info vdr[1576]: loading /etc/vdr/themes/sttng-default.theme
    Oct 31 17:51:17 linvdr user.debug vdr[1597]: LIRC remote control thread started (pid=1597, tid=6151)
    Oct 31 17:51:17 linvdr user.debug vdr[1598]: KBD remote control thread started (pid=1598, tid=7176)
    Oct 31 17:51:17 linvdr user.debug vdr[1576]: remote control LIRC - keys known
    Oct 31 17:51:17 linvdr user.debug vdr[1576]: remote control KBD - keys known
    Oct 31 17:51:17 linvdr user.info vdr[1576]: switching to channel 2
    Oct 31 17:51:17 linvdr user.info vdr[1596]: graphlcd plugin: T6963 initialized.
    Oct 31 17:51:17 linvdr user.debug vdr[1576]: creating directory /ramdisk/vtx/S19.2E-1-1079-28006
    Oct 31 17:51:17 linvdr user.debug vdr[1599]: receiver on device 1 thread started (pid=1599, tid=8201)
    Oct 31 17:51:17 linvdr user.debug vdr[1576]: setting watchdog timer to 900 seconds
    Oct 31 17:51:17 linvdr user.info vdr[1594]: channel 21 (KiKa;ZDFvision) event 15:30 'Tabaluga tivi' status 4
    Oct 31 17:51:18 linvdr user.info vdr[1594]: channel 7 (3sat;ZDFvision) event 16:30 'Von Null auf 42 (3/3)' status 4
    Oct 31 17:51:18 linvdr user.info vdr[1594]: channel 2 (ZDF;ZDFvision) event 15:20 'Vaya con dios' status 4
    Oct 31 17:51:18 linvdr user.info vdr[1594]: channel 13 (Eurosport;ZDFvision) event 16:30 'Fußball' status 4
    Oct 31 17:51:19 linvdr user.info vdr[1594]: channel 25 (ZDFinfokanal;ZDFvision) event 16:45 'form & funktion' status 4
    Oct 31 17:51:22 linvdr user.info vdr[1576]: connect from 127.0.0.1, port 32768 - accepted
    Oct 31 17:51:23 linvdr user.debug vdr[1576]: max. latency time 2 seconds
    Oct 31 17:51:24 linvdr user.info vdr[1576]: closing SVDRP connection
    Oct 31 17:51:24 linvdr user.debug vdr[1576]: assuming manual start of VDR
    Oct 31 17:51:34 linvdr user.err vdr[1576]: ERROR: Konnte Disk nicht identifizieren!
    Oct 31 17:51:36 linvdr user.debug vdr[1576]: max. latency time 3 seconds
    Oct 31 17:51:56 linvdr user.debug vdr[1595]: extb: answer from extb complete
    Oct 31 17:51:56 linvdr user.info vdr[1576]: connect from 127.0.0.1, port 32769 - accepted
    Oct 31 17:51:56 linvdr user.info vdr[1576]: SVDRP message: 'Laufwerk oeffnen ...'
    Oct 31 17:51:56 linvdr user.info vdr[1576]: info: Laufwerk oeffnen ...
    Oct 31 17:51:56 linvdr user.info vdr[1576]: closing SVDRP connection
    Oct 31 17:52:02 linvdr user.debug vdr[1595]: extb: answer from extb complete
    Oct 31 17:52:03 linvdr user.info vdr[1576]: connect from 127.0.0.1, port 32770 - accepted
    Oct 31 17:52:03 linvdr user.info vdr[1576]: SVDRP message: 'Laufwerk schliessen ....'
    Oct 31 17:52:03 linvdr user.info vdr[1576]: info: Laufwerk schliessen ....
    Oct 31 17:52:03 linvdr user.info vdr[1576]: closing SVDRP connection
    Oct 31 17:52:19 linvdr user.err vdr[1576]: ERROR: Konnte Disk nicht identifizieren!
    Oct 31 17:52:29 linvdr user.debug vdr[1576]: max. latency time 4 seconds
    Oct 31 17:52:35 linvdr user.debug vdr[1576]: VCD: Track 1
    Oct 31 17:52:35 linvdr user.debug vdr[1576]: VCD: Play Track 1
    Oct 31 17:53:05 linvdr user.info vdr[1576]: switching to channel 2
    Oct 31 17:53:05 linvdr user.debug vdr[1599]: receiver on device 1 thread ended (pid=1599, tid=8201)
    Oct 31 17:53:05 linvdr user.debug vdr[1576]: buffer stats: 0 (0%) used
    Oct 31 17:53:05 linvdr user.debug vdr[1627]: receiver on device 1 thread started (pid=1627, tid=10249)
    Oct 31 17:53:19 linvdr user.debug vdr[1576]: VCD: Track 2
    Oct 31 17:53:19 linvdr user.debug vdr[1576]: VCD: Play Track 2
    Oct 31 17:53:19 linvdr user.debug vdr[1629]: VCD: input thread started (pid=1629)
    Oct 31 17:53:40 linvdr user.debug vdr[1629]: VCD: input thread ended (pid=1629)
    Oct 31 17:53:40 linvdr user.info vdr[1576]: switching to channel 2
    Oct 31 17:53:40 linvdr user.debug vdr[1627]: receiver on device 1 thread ended (pid=1627, tid=10249)
    Oct 31 17:53:40 linvdr user.debug vdr[1576]: buffer stats: 0 (0%) used
    Oct 31 17:53:40 linvdr user.debug vdr[1630]: receiver on device 1 thread started (pid=1630, tid=13321)
    Oct 31 17:53:58 linvdr auth.info login[1409]: root login on `tty1'


    Das abspielen von CD´s geht übrigens weiter hin nicht. Hat einer eine Ahnung was hier falsch läuft? Für Hilfe wäre ich sehr dankbar


    Gruß Dieter

    VDR1: Asrock K7VM2, Nexus, LCD, linvdr 0.5


    VDR2.
    Hardware: ASUS P4B266, Celeron 2,0, Ram 512MB, 1 x 80GB 1x 120 GB Samsung, TT 1.5, Nexus 2.1, Extb von TBE, GLCD
    Software: LinVDR 0.6 mit VDR 1.3.12

    Zitat

    Original von Dejuh
    wie sieht es mit DXR3 aus?


    Hi, Sorry für meine falsche Ausdrucksweise,
    such dxr3-plugin für vdr-1.3.11?
    Gruß
    Dejuh

    Server-3000-AMD-64bit-1536mbRam- Suse-10.0-DHCP-TFTP-PHP-Apache-VDR-1.3.43-2x DVB-S-TT-1.3 und 2x NOVA-S-250GB-250GB für Video
    Bose-Zenega-Xine
    Client mit Epia-DXR3-Lüfterlos und Linvdr mit vdr-1.3.27
    DVD-Wechsler ......zu sehen auf meiner HP
    VDR-Touch-Control mit DXR3 und Linvdr-1.3.27
    2x Mediamvp

    Zitat

    Original von DarkAngel
    Ich würde jetzt mal behaupten, daß da noch der alte Kernel läuft. Bitte mal mit "uname -r" überprüfen.


    Ich bin auch ne Pappnase. Stimmt! Jetzt weiß ich auch, warum. Hatte schonmal versucht auf 2.6.5 upzudaten aber da hatte ich dann Probleme mit meinem NIC (r8169). Jedes Mal, wenn ich per SSH drauf wollte, fror mir die Kiste komplett ein und ich musste aus-/einschalten.
    Scheint ein bekanntes Problem des Moduls zu sein und ist auch bei 2.6.8.1 immer noch nicht behoben.
    Irgendwie gabs da auch einige Vorschläge. Nur ACPI möchte ich nicht grad deaktivieren. Das brauch ich doch für den Wakeup. NVRAM geht bei mir irgendwie nicht so gut.
    Und mit der Kompiliererei hab ich bei LinVDR ja nicht mehr so viel am Hut mangels Entwickler-System.
    Weiß jemand, ob man da noch nen Patch einkompilieren müsste?

    Hardware: ABIT KT7-RAID, Athlon900, 80GB HDD, 256 MB RAM, DVB-S Rev.1.3, DVD-LW, 40x4 LCD blau inv., Zoltrix Nightingale mit opt. Modul, 10/100/1000 Ethernet, Verax-Lüfter für Netzteil, CPU und Gehäuse


    Gehäuse: Scenic Desktop mit Alu-Verkleidung (geschliffen, natur eloxiert)


    Software: LinVDR 0.6, VDR 1.3.11

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden