[channelscan]: Kanalsuche mit Reel Netceiver (mcli) für DVB-C - VDR-Crash / Channel-Scan with Netceiver (mcli) for DVB-C - VDR-Crash

  • gggggg

    Is it necessary to scan on each tuner separately, for example, all tuners are connected to different dishes, or is there no such possibility and all tuners are structurally connected to one cable?

    ja diese Möglichkeit gibt es und auch das DVB-C & DVB-S1/2 Tuner gemischt im NetCeiver verbaut sind

    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

  • In my case the dish has 2 LNBs for 2 SAT positions (just Astra used right now). 2x2(hor,vrt) cables from LNBs to the SAT-multiswitch. From the multiswitch 6 cables to 3x2 DVB-S2 tuners in one netceiver. (I even heard of people having 2 netceivers).

    Each tuner can be assigned to a different SAT position.

    Diseq and rotor is also supported.

    As cinfo said, one could also mix DVB-C/S/T.

    Liebe Grüße g ;)

    NCV6dvbS2+Alphacrypt+ORF, BM2LTS4.4 NUC11i3 NVMe+HDD, BM2LTS2.94.4 AVG1 T7400 SSD+HDD NvidiaGT720

  • As cinfo said, one could also mix DVB-C/S/T.

    Nein da die DVB-T-Karten für den NetCeiver hier Deutschland ohne Funktion sind. DVB-T2 Karten wurden für den NetCeiver nicht mehr hergestellt.


    gggggg --> gibt es das "alte" DVB-T noch bei Euch?

    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

  • Hi lnj , Thx for the new 1.2.2.


    It seems to work, but syslog has those Messages. I did not look into syslog with your last version, so th probs most likely where there as well ...



    Prob1

    Code
    May 27 11:50:44 BM2LTS-MC vdr: [4571] loading /var/lib/vdr/setup.conf
    May 27 11:50:44 BM2LTS-MC vdr: [4571] ERROR: unknown config parameter: channelscan.Logfile = 0
    May 27 11:50:44 BM2LTS-MC vdr: [4571] ERROR: unknown config parameter: channelscan.ServiceType = 3

    ServiceType 3 is update PID only


    Prob2 Errors and vdr crash


    please find syslog attached

  • INFO [channelscan]: Please update Transponder lists 

    Diese Plugin Version hast Du noch in der alten BM2LTS Version getestet?


    Hm, die Listen sind eigentlich im neuen Image aktualisiert

    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

  • ERROR: [channelscan] can`t open LoadSatTpls /var/lib/vdr/plugins/transponders/S19.2E.tpl.bz2


    ist auch da --> hast Du was bei Dir geändert? Wenn ich mir das hier so anschaue gibt es diese Datei überhaupt nicht da alle entpackt sind.


    (VDR) NUC11PAH & GEEKOM MINI-IT11-11. Generation * BM2LTS * DD NET S2 Max * NC * (Sound) Cinebar Lux Set * (Stream) Apple TV 4K (2022) *

    (Light) PHILIPS Hue Play HDMI Sync Box & Gradient Lightstrip * (OLED TV) LG OLED65G29LA

    Edited once, last by cinfo ().

  • This is a normal.

    Code
    ERROR: [channelscan] can`t open LoadSatTpls /var/lib/vdr/plugins/transponders/S19.2E.tpl.bz2 --- try uncompressed 
    Code
    ERROR: unknown config parameter: channelscan.Logfile = 0
    ERROR: unknown config parameter: channelscan.ServiceType = 3

    Logfile and ServiceType not saved in config file now, hence the error.


    ServiceType is service type of channel (tv, radio, fta, hdtv).


    Code
    Please update Transponder lists

    Now it's always on autoscan.


    Code
    ERROR: plugin '<no name given>' called cPlugin::ConfigDirectory(), which is not thread safe!

    Weird i don't have it...


    Code
    Magick: abort due to signal 11 (SIGSEGV) "Segmentation Fault"...

    If it crashes all the time, i need a crash dump.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!