kernel ist ein 3.13.1 :
Code
root@echnaton:~# uname -a
Linux echnaton 3.13.1 #1 SMP Sun Feb 2 08:30:55 CET 2014 x86_64 GNU/Linux
root@echnaton:~#
lspci liefert:
Code
...
01:05.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
...
dmesg liefert:
Code
root@echnaton:~# dmesg | grep flex
[ 3.849059] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 3.888875] flexcop-pci: will use the HW PID filter.
[ 3.888881] flexcop-pci: card revision 2
[ 3.904765] b2c2-flexcop: MAC address = 00:08:c9:e1:87:df
[ 3.904775] b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter
root@echnaton:~#
lsmod sagt:
Code
root@echnaton:~# lsmod | grep flex
b2c2_flexcop_pci 13101 0
b2c2_flexcop 18188 1 b2c2_flexcop_pci
dvb_core 64562 1 b2c2_flexcop
i2c_core 24304 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,b2c2_flexcop
root@echnaton:~#
der VDR mosert folgerichtig "kein Device
was kst falsch?