Habe ein Problem mit den sundtek sticks am cubieboard2
hatte die dinger zwar schon mal an dem ding am laufen aber irgendwie wollen die nach der neuinstallation nicht so wie ich will
Code
013-10-23 20:17:46 [2938] Starting up Multimedia Framework (Oct 19 2013 21:54:28)
2013-10-23 20:17:46 [2938] Detected DVB version.h
2013-10-23 20:17:46 [2939] Starting service processor (PID 2939)
2013-10-23 20:17:46 [2938] API Version: 5.4
2013-10-23 20:17:46 [2938] Running on Linux (3.4.43+)
2013-10-23 20:17:46 [2938] unable to open /dev/misc
2013-10-23 20:17:46 [2938] scanning devices
2013-10-23 20:17:46 [2938] scanning for drivers
2013-10-23 20:17:46 [2938] scanning for plugins
2013-10-23 20:17:46 [2938] Starting up device manager
2013-10-23 20:17:46 [2938] scanning devices done
2013-10-23 20:17:46 [2938] attached devices:
2013-10-23 20:17:46 [2939] Autostarting scripts in /etc/sundtek/
2013-10-23 20:17:46 [2939] executed all available items
2013-10-23 20:17:46 [2938] registering ID: 0
2013-10-23 20:17:46 [2938] disconnecting kernel driver
2013-10-23 20:17:47 [2938] Attaching DVB-S/S2
2013-10-23 20:17:52 [2938] demodulator successfully attached (DVB_S/S2)!
2013-10-23 20:17:52 [2938] Allocation using pg for type 65678
2013-10-23 20:17:52 [2938] requesting to attach tuner(s) now
2013-10-23 20:17:52 [2938] registering: adapter0/0
2013-10-23 20:17:52 [2938] registered virtual: /dev/dvb/adapter0/frontend0
2013-10-23 20:17:52 [2938] registered virtual: /dev/dvb/adapter0/demux0
2013-10-23 20:17:52 [2938] registered virtual: /dev/dvb/adapter0/dvr0
2013-10-23 20:17:52 [2938] Setting RC Protocol to NEC
2013-10-23 20:17:52 [2938] registered virtual: /dev/mediainput0
2013-10-23 20:17:52 [2938] Remote Control Layout: 0
2013-10-23 20:17:52 [2939] trying to load uinput module
2013-10-23 20:17:52 [2939] loading uinput kernel extention failed, remote control will not work with lirc
2013-10-23 20:17:52 [2938] No remote control support available
2013-10-23 20:17:52 [2938]
2013-10-23 20:17:52 [2938] Sundtek MediaTV Driver loaded. This driver is licensed for non-commercial use
2013-10-23 20:17:52 [2938] with Sundtek MediaTV only
2013-10-23 20:17:52 [2938] Driver loaded within 5786 milliseconds
2013-10-23 20:17:52 [2938] Serial(0): U110822151108
2013-10-23 20:17:53 [2938] Initial devicescan done, switching detection mode
2013-10-23 20:18:07 [2938] Enabling standby
2013-10-23 20:18:07 [2938] Device is now in standby
2013-10-23 20:18:36 [2938] Waking up device
2013-10-23 20:18:36 [2938] no lock found
2013-10-23 20:18:36 [2938] voltage is low/0
2013-10-23 20:18:36 [2938] Set tone off/0
2013-10-23 20:18:36 [2938] voltage is high/0
2013-10-23 20:18:36 [2938] no lock found
2013-10-23 20:18:36 [2938] Starting diseqc timing
2013-10-23 20:18:36 [2938] diseqc len: 4/0
2013-10-23 20:18:36 [2938] Set tone off/0
2013-10-23 20:18:37 [2938] Diseqc execution time: 272 ms
2013-10-23 20:18:37 [2938] diseqc send burst Modulated (SEC_MINI_B)
2013-10-23 20:18:37 [2938] no lock found
2013-10-23 20:18:37 [2938] Set tone off/0
2013-10-23 20:18:37 [2938] Starting tuning timing
2013-10-23 20:18:37 [2938] Tuning DVB-S2 (8PSK) Transponder
2013-10-23 20:18:37 [2938] USING FEC_2_3
2013-10-23 20:18:37 [2938] roll off 035
2013-10-23 20:18:37 [2938] LNB tone off
2013-10-23 20:18:37 [2938] voltage is high
2013-10-23 20:18:37 [2938] setting frequency: 1743000
2013-10-23 20:18:37 [2938] setting symbolrate: 22000
2013-10-23 20:18:37 [2938] Good ACQ locked and tracking :-)
2013-10-23 20:18:37 [2938] Tuning delay: 275 ms
2013-10-23 20:18:37 [2938] Enabling tuning delay
2013-10-23 20:18:38 [2938] found lock
2013-10-23 20:18:38 [2938] found lock
2013-10-23 20:18:38 [2938] found lock
2013-10-23 20:18:38 [2938] found lock
2013-10-23 20:18:38 [2938] This system does not support memory mapped USB transfers
2013-10-23 20:18:38 [2938] Once your system reaches the latest kernel version the
2013-10-23 20:18:38 [2938] performance will increase automatically
2013-10-23 20:18:39 [2938] found lock
2013-10-23 20:18:39 [2938] found lock
2013-10-23 20:18:40 [2938] found lock
2013-10-23 20:18:40 [2938] found lock
2013-10-23 20:18:41 [2938] found lock
2013-10-23 20:18:41 [2938] found lock
2013-10-23 20:18:42 [2938] found lock
2013-10-23 20:18:43 [2938] found lock
2013-10-23 20:18:45 [2938] found lock
2013-10-23 20:18:46 [2938] found lock
2013-10-23 20:18:47 [2938] found lock
2013-10-23 20:18:48 [2938] found lock
2013-10-23 20:18:49 [2938] found lock
2013-10-23 20:18:50 [2938] found lock
2013-10-23 20:18:51 [2938] found lock
2013-10-23 20:18:52 [2938] found lock
2013-10-23 20:18:53 [2938] found lock
2013-10-23 20:18:54 [2939] problem reading data in service processor...
Alles anzeigen
Vorgang:
ich starte den vdr
zappe mit dem vlc / streamdev auf ard-hd
das bild kommt und nach 2-5s kickt sich der treiber weg.
bei aufnahmen hab ich keine probleme
Code
2013-10-23T20:34:40.309830+02:00 Cubian vdr: [3597] live timer 1 (1 2034-2334 'hgjghjgh') added
2013-10-23T20:34:40.370592+02:00 Cubian vdr: [3597] switching device 1 to channel 1
2013-10-23T20:34:40.657011+02:00 Cubian vdr: [3597] timer 1 (1 2034-2334 'hgjghjgh') start
2013-10-23T20:34:40.657166+02:00 Cubian vdr: [3597] waiting for EPG info...
2013-10-23T20:34:44.660217+02:00 Cubian vdr: [3597] no EPG info available
2013-10-23T20:34:44.660375+02:00 Cubian vdr: [3597] record /video/hgjghjgh/2013-10-23.20.34.1-0.rec
2013-10-23T20:34:44.660469+02:00 Cubian vdr: [3597] creating directory /video/hgjghjgh
2013-10-23T20:34:44.660530+02:00 Cubian vdr: [3597] creating directory /video/hgjghjgh/2013-10-23.20.34.1-0.rec
2013-10-23T20:34:44.671606+02:00 Cubian vdr: [3597] recording to '/video/hgjghjgh/2013-10-23.20.34.1-0.rec/00001.ts'
2013-10-23T20:34:44.747290+02:00 Cubian vdr: [3624] recording thread started (pid=3597, tid=3624, prio=high)
2013-10-23T20:34:44.748159+02:00 Cubian vdr: [3625] receiver on device 1 thread started (pid=3597, tid=3625, prio=high)
2013-10-23T20:34:44.753386+02:00 Cubian vdr: [3626] TS buffer on device 1 thread started (pid=3597, tid=3626, prio=high)
2013-10-23T20:34:45.752745+02:00 Cubian vdr: [3597] max. latency time 5 seconds
2013-10-23T20:35:15.809204+02:00 Cubian vdr: [3597] switching to channel 1
Alles anzeigen
Code
2013-10-23T20:34:18.325855+02:00 Cubian vdr: [3597] VDR version 2.0.2 started
2013-10-23T20:34:18.326202+02:00 Cubian vdr: [3597] running as daemon (tid=3597)
2013-10-23T20:34:18.326923+02:00 Cubian vdr: [3597] codeset is 'UTF-8' - known
2013-10-23T20:34:18.348780+02:00 Cubian vdr: [3597] found 28 locales in /usr/local/share/locale
2013-10-23T20:34:18.349332+02:00 Cubian vdr: [3597] loading plugin: /usr/local/lib/vdr/libvdr-streamdev-client.so.2.0.0
2013-10-23T20:34:18.357054+02:00 Cubian vdr: [3597] loading plugin: /usr/local/lib/vdr/libvdr-streamdev-server.so.2.0.0
2013-10-23T20:34:18.370064+02:00 Cubian vdr: [3597] loading plugin: /usr/local/lib/vdr/libvdr-live.so.2.0.0
2013-10-23T20:34:18.488722+02:00 Cubian vdr: [3597] loading plugin: /usr/local/lib/vdr/libvdr-epgsearch.so.2.0.0
2013-10-23T20:34:18.516747+02:00 Cubian vdr: [3597] loading /etc/vdr/setup.conf
2013-10-23T20:34:18.520709+02:00 Cubian vdr: [3597] loading /etc/vdr/sources.conf
2013-10-23T20:34:18.523074+02:00 Cubian vdr: [3597] loading /etc/vdr/diseqc.conf
2013-10-23T20:34:18.523911+02:00 Cubian vdr: [3597] loading /etc/vdr/channels.conf
2013-10-23T20:34:18.569396+02:00 Cubian vdr: [3597] loading /etc/vdr/timers.conf
2013-10-23T20:34:18.570190+02:00 Cubian vdr: [3597] loading /etc/vdr/svdrphosts.conf
2013-10-23T20:34:18.602768+02:00 Cubian vdr: [3598] video directory scanner thread started (pid=3597, tid=3598, prio=high)
2013-10-23T20:34:18.603435+02:00 Cubian vdr: [3600] epg data reader thread started (pid=3597, tid=3600, prio=high)
2013-10-23T20:34:18.603855+02:00 Cubian vdr: [3600] reading EPG data from /var/cache/vdr/epg.data
2013-10-23T20:34:18.604293+02:00 Cubian vdr: [3597] registered source parameters for 'A - ATSC'
2013-10-23T20:34:18.605021+02:00 Cubian vdr: [3598] video directory scanner thread ended (pid=3597, tid=3598)
2013-10-23T20:34:18.605992+02:00 Cubian vdr: [3599] video directory scanner thread started (pid=3597, tid=3599, prio=high)
2013-10-23T20:34:18.606325+02:00 Cubian vdr: [3599] video directory scanner thread ended (pid=3597, tid=3599)
2013-10-23T20:34:18.606819+02:00 Cubian vdr: [3597] registered source parameters for 'C - DVB-C'
2013-10-23T20:34:18.607299+02:00 Cubian vdr: [3600] epg data reader thread ended (pid=3597, tid=3600)
2013-10-23T20:34:18.607730+02:00 Cubian vdr: [3597] registered source parameters for 'S - DVB-S'
2013-10-23T20:34:18.608024+02:00 Cubian vdr: [3597] registered source parameters for 'T - DVB-T'
2013-10-23T20:34:18.612875+02:00 Cubian vdr: [3597] probing /dev/dvb/adapter0/frontend0
2013-10-23T20:34:18.613175+02:00 Cubian vdr: [3597] creating cDvbDevice
2013-10-23T20:34:18.613519+02:00 Cubian vdr: [3597] new device number 1
2013-10-23T20:34:18.617366+02:00 Cubian vdr: [3597] DVB API version is 0x0504 (VDR was built with 0x0504)
2013-10-23T20:34:18.617754+02:00 Cubian vdr: [3597] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("Sundtek DVB-S/S2")
2013-10-23T20:34:18.618535+02:00 Cubian vdr: [3601] tuner on frontend 0/0 thread started (pid=3597, tid=3601, prio=high)
2013-10-23T20:34:18.619094+02:00 Cubian vdr: [3597] found 1 DVB device
2013-10-23T20:34:18.619685+02:00 Cubian vdr: [3601] cTimeMs: using monotonic clock (resolution is 1 ns)
2013-10-23T20:34:18.620479+02:00 Cubian vdr: [3597] initializing plugin: streamdev-client (0.6.0-git): VTP Streaming Client
2013-10-23T20:34:18.621295+02:00 Cubian vdr: [3597] initializing plugin: streamdev-server (0.6.0-git): VDR Streaming Server
2013-10-23T20:34:18.621899+02:00 Cubian vdr: [3597] initializing plugin: live (0.3.0): Live Interactive VDR Environment
2013-10-23T20:34:18.622537+02:00 Cubian vdr: [3597] initializing plugin: epgsearch (1.0.1.beta5): Suche im EPG nach Wiederholungen und anderem
2013-10-23T20:34:18.622670+02:00 Cubian vdr: [3597] setting primary device to 1
2013-10-23T20:34:18.622743+02:00 Cubian vdr: [3597] device 1 has no MPEG decoder
2013-10-23T20:34:18.622822+02:00 Cubian vdr: [3597] assuming manual start of VDR
2013-10-23T20:34:18.623256+02:00 Cubian vdr: [3597] SVDRP listening on port 6419
2013-10-23T20:34:18.623371+02:00 Cubian vdr: [3597] setting current skin to "sttng"
2013-10-23T20:34:18.623722+02:00 Cubian vdr: [3597] loading /etc/vdr/themes/sttng-default.theme
2013-10-23T20:34:18.624961+02:00 Cubian vdr: [3597] starting plugin: streamdev-client
2013-10-23T20:34:18.625085+02:00 Cubian vdr: [3597] starting plugin: streamdev-server
2013-10-23T20:34:18.625256+02:00 Cubian vdr: [3597] loading /etc/vdr/plugins/streamdev-server/streamdevhosts.conf
2013-10-23T20:34:18.625693+02:00 Cubian vdr: [3602] section handler thread started (pid=3597, tid=3602, prio=low)
2013-10-23T20:34:18.626322+02:00 Cubian vdr: [3597] starting plugin: live
2013-10-23T20:34:18.630970+02:00 Cubian vdr: [3603] streamdev server thread started (pid=3597, tid=3603, prio=high)
2013-10-23T20:34:18.631854+02:00 Cubian vdr: [3603] Streamdev: Listening (VTP) on port 2004
2013-10-23T20:34:18.632664+02:00 Cubian vdr: [3603] Streamdev: Listening (HTTP) on port 3000
2013-10-23T20:34:18.651238+02:00 Cubian vdr: [3597] LIVE: initial file cache has 82 entries and needs 377394 bytes of data!
2013-10-23T20:34:18.652093+02:00 Cubian vdr: [3597] starting plugin: epgsearch
2013-10-23T20:34:18.652790+02:00 Cubian vdr: [3597] loading /etc/vdr/plugins/epgsearch/epgsearchcats.conf
2013-10-23T20:34:18.653898+02:00 Cubian vdr: [3597] loading /etc/vdr/plugins/epgsearch/epgsearchmenu.conf
2013-10-23T20:34:18.657369+02:00 Cubian vdr: [3597] EPGSearch: loading /etc/vdr/plugins/epgsearch/epgsearch.conf
2013-10-23T20:34:18.658065+02:00 Cubian vdr: [3597] EPGSearch: loading /etc/vdr/plugins/epgsearch/epgsearchdone.data
2013-10-23T20:34:18.658790+02:00 Cubian vdr: [3604] [live] INFO: attempt to listen on ip = ''
2013-10-23T20:34:18.662986+02:00 Cubian vdr: [3604] [live] ERROR: Unable to load cert/key (/etc/vdr/plugins/live/live.pem//etc/vdr/plugins/live/live-key.pem): Datei oder Verzeichnis nicht gefunden
2013-10-23T20:34:18.667825+02:00 Cubian vdr: [3597] loading /etc/vdr/plugins/epgsearch/timersdone.conf
2013-10-23T20:34:18.668842+02:00 Cubian vdr: [3597] EPGSearch: loading /etc/vdr/plugins/epgsearch/epgsearchupdmail.templ
2013-10-23T20:34:18.670574+02:00 Cubian vdr: [3612] EPGSearch: searchtimer thread started (pid=3597, tid=3612, prio=high)
2013-10-23T20:34:18.671192+02:00 Cubian vdr: [3597] switching to channel 1
2013-10-23T20:34:18.671858+02:00 Cubian vdr: [3597] setting watchdog timer to 60 seconds
2013-10-23T20:34:18.672370+02:00 Cubian vdr: [3613] EPGSearch: conflictcheck thread started (pid=3597, tid=3613, prio=high)
2013-10-23T20:34:18.685266+02:00 Cubian vdr: [3597] OSD size changed to 720x480 @ 1
2013-10-23T20:34:18.689593+02:00 Cubian vdr: [3597] ERROR: no OSD provider available - using dummy OSD!
2013-10-23T20:34:20.306709+02:00 Cubian vdr: [3597] max. latency time 2 seconds
2013-10-23T20:34:20.672017+02:00 Cubian vdr: [3612] EPGSearch: search timer update started
2013-10-23T20:34:20.673415+02:00 Cubian vdr: [3613] EPGSearch: timer conflict check started
2013-10-23T20:34:20.673859+02:00 Cubian vdr: [3613] EPGSearch: timer conflict check finished
2013-10-23T20:34:20.677816+02:00 Cubian vdr: [3612] EPGSearch: search timer update finished
2013-10-23T20:34:40.309830+02:00 Cubian vdr: [3597] live timer 1 (1 2034-2334 'hgjghjgh') added
2013-10-23T20:34:40.370592+02:00 Cubian vdr: [3597] switching device 1 to channel 1
2013-10-23T20:34:40.657011+02:00 Cubian vdr: [3597] timer 1 (1 2034-2334 'hgjghjgh') start
2013-10-23T20:34:40.657166+02:00 Cubian vdr: [3597] waiting for EPG info...
2013-10-23T20:34:44.660217+02:00 Cubian vdr: [3597] no EPG info available
2013-10-23T20:34:44.660375+02:00 Cubian vdr: [3597] record /video/hgjghjgh/2013-10-23.20.34.1-0.rec
2013-10-23T20:34:44.660469+02:00 Cubian vdr: [3597] creating directory /video/hgjghjgh
2013-10-23T20:34:44.660530+02:00 Cubian vdr: [3597] creating directory /video/hgjghjgh/2013-10-23.20.34.1-0.rec
2013-10-23T20:34:44.671606+02:00 Cubian vdr: [3597] recording to '/video/hgjghjgh/2013-10-23.20.34.1-0.rec/00001.ts'
2013-10-23T20:34:44.747290+02:00 Cubian vdr: [3624] recording thread started (pid=3597, tid=3624, prio=high)
2013-10-23T20:34:44.748159+02:00 Cubian vdr: [3625] receiver on device 1 thread started (pid=3597, tid=3625, prio=high)
2013-10-23T20:34:44.753386+02:00 Cubian vdr: [3626] TS buffer on device 1 thread started (pid=3597, tid=3626, prio=high)
2013-10-23T20:34:45.752745+02:00 Cubian vdr: [3597] max. latency time 5 seconds
2013-10-23T20:35:15.809204+02:00 Cubian vdr: [3597] switching to channel 1
2013-10-23T20:41:53.374582+02:00 Cubian vdr: [3603] Streamdev: Accepted new client (HTTP) 192.168.2.106:54796
2013-10-23T20:41:53.584026+02:00 Cubian vdr: [3673] streamdev-writer thread started (pid=3597, tid=3673, prio=high)
2013-10-23T20:41:53.584491+02:00 Cubian vdr: [3674] streamdev-livestreaming thread started (pid=3597, tid=3674, prio=high)
2013-10-23T20:41:56.228723+02:00 Cubian vdr: [3602] ERROR: can't set filter (pid=5100, tid=02, mask=FF): Erfolg
Alles anzeigen