Burn-Plugin will nicht mehr - seit letztem Update wg. openssl-Keys

root@siduxbox:/usr/share/vdr-plugin-burn# more vdrburn-dvd.sh
#!/bin/sh


# For DEBUG Output - can be left since logfiles are deleted when job finishes
set -x


# To make the script exit whenever a command fails (MUST NOT BE REMOVED)
set -e


# TODO
# Variables passed in (not up-to-date):
# $RECORDING_PATH           Path of VDR recording (/video0/%Bla/2004-01-...rec)
# $MPEG_PATH                Path where streams and movie are stored
# $VIDEO_FILE               Full path- and filename of demuxed video stream
# $AUDIO_FILES              Space-separated list of demuxed audio streams
# $MOVIE_FILE               Full path- and filename of muxed movie
# $REQUANT_FACTOR           Factor by that video shall be shrinked
# $IGNORE_TRACKS            Comma-separated list of audio track IDs to be
#                           ignored
# $USED_TRACKS              Comma-separated list of audio track IDs to be used
# $DVDAUTHOR_XML            Full path- and filename of the DVDAuthor XML
# $DVDAUTHOR_PATH           Full path of the written DVD structure
# $TRACK_ON_DVD             Number of track on dvd in which VDR recording is
#                           saved (2 digits)
# $ISO_FILE                 Full path- and filename of target ISO
# $ISO_PIPE                 Fifo where the created ISO should be piped into
# $DVD_DEVICE               Full path- and filename of the DVD burner device
# $CONFIG_PATH              Full path to burn's config directory
# $TEMP_PATH                Full path to burn's temp directory (namely the same
#                           as $MPEG_TMP_PATH)


# Some versions of growisofs refuse to start when run with sudo, and may
# misdetect this condition if vdr itself is started from a sudo session.
unset SUDO_COMMAND


case $1 in
	render)
		png2yuv -j "$MENU_BACKGROUND" -f 25 -n 1 -I t -L 1 | \
		mpeg2enc -f 8 -n p -o "$MENU_M2V"
		mplex -f 8 -o /dev/stdout "$MENU_M2V" "$MENU_SOUNDTRACK" | \
		spumux -v 2 "$MENU_XML" > "$MENU_MPEG"
	;;


	demux)
		IGNORE=""
		if [ ! -z $IGNORE_TRACKS ]; then
			IGNORE="-ignore $IGNORE_TRACKS"
		fi


		CUT=""
		if [ ! -z $USE_CUTTING ]; then
			CUT="-cut"
		fi


		vdrsync.pl -o "$MPEG_TMP_PATH" \
			-v-filter "/usr/lib/vdr-plugin-burn/burn-buffers" \
			-a-filter "/usr/lib/vdr-plugin-burn/burn-buffers" \
			-ac3-filter "/usr/lib/vdr-plugin-burn/burn-buffers" \
			$CUT $IGNORE "$RECORDING_PATH/"
	;;


	demuxpx)
		test -e "$MPEG_TMP_PATH/convert" && rm "$MPEG_TMP_PATH/convert"
		ln -s "$RECORDING_PATH" "$MPEG_TMP_PATH/convert"


		CUT=""
		if [ ! -z $USE_CUTTING ]; then
			CUT="-cut $MPEG_DATA_PATH/px.cut"
		fi


		/usr/bin/projectx \
				-ini $CONFIG_PATH/ProjectX.ini \
				$CUT -id $USED_TRACKS,0x1f,0x20 \
				-demux -out "$MPEG_DATA_PATH" -name vdrsync \
				$(ls "$MPEG_TMP_PATH/convert/"[0-9][0-9][0-9].vdr)


		for NUM in `seq 1 9`; do
			if [ -e "$MPEG_DATA_PATH/vdrsync[$NUM].mpa" ]; then
				rm -f "$MPEG_DATA_PATH/vdrsync$NUM.mpa"
				mv "$MPEG_DATA_PATH/vdrsync[$NUM].mpa" "$MPEG_DATA_PATH/vdrsync$NUM.mpa"
			fi
		done
	;;


	requant)
		requant $REQUANT_FACTOR 3 $VIDEO_SIZE < "$VIDEO_FILE" > "$REQUANT_FILE"
		rm -f "$VIDEO_FILE"
	;;


	tcrequant)
		tcrequant -f $REQUANT_FACTOR < "$VIDEO_FILE" > "$REQUANT_FILE"
		rm -f "$VIDEO_FILE"
	;;


	mplex)
# ------ ergänzt --- Audionamen in Ordnung bringen
  		rm "$MPEG_DATA_PATH/vdrsync0.mpa"
            	ln "$MPEG_DATA_PATH/vdrsync.mpa" "$MPEG_DATA_PATH/vdrsync0.mpa"   


  		rm "$MPEG_DATA_PATH/vdrsync1.mpa"
            	ln "$MPEG_DATA_PATH/vdrsync-02.mpa" "$MPEG_DATA_PATH/vdrsync1.mpa"   
# ------- Ende --- ergänzt ---- Ende ------------


		MPLEX_OPTS="-S 0"
		(mplex -h 2>&1 | grep -q -- --ignore-seqend-markers) && \
			MPLEX_OPTS="$MPLEX_OPTS -M"


 		### Subtitles
		SON=$(find "$MPEG_DATA_PATH" -name \*.son)
 		SRT=$(find "$MPEG_DATA_PATH" -name \*.srt)
		SUP=$(find "$MPEG_DATA_PATH" -name \*.sup)
		if [ "!" "x$SON" = "x" ]; then
			# spumux.xml generation is based on son2spumux.sh: http://brigitte.dna.fi/~apm/
			echo "<subpictures>" > "$MPEG_DATA_PATH/spumux.xml"
			echo "  <stream>" >> "$MPEG_DATA_PATH/spumux.xml"
			cat "$SON" | tail -n +11 | while read l1
			do
				read l2 || exit 1
				x=`echo $l1 | cut -f2 -d\( | awk '{printf("%d", $1);}'`
				y=`echo $l1 | cut -f2 -d\( | awk '{printf("%d", $2);}'`
				t1=`echo $l2 | awk '{t1=substr($2,1,8); t2=substr($2,10,2); printf("%s.%s", t1, t2);}'`
				t2=`echo $l2 | awk '{t1=substr($3,1,8); t2=substr($3,10,2); printf("%s.%s", t1, t2);}'`
				i=`echo $l2 | awk '{printf("%s", $NF);}'`
				echo "    <spu start=\"$t1\"" >> "$MPEG_DATA_PATH/spumux.xml"
				echo "         end=\"$t2\"" >> "$MPEG_DATA_PATH/spumux.xml"
				echo "         image=\"$MPEG_DATA_PATH/$i\"" >> "$MPEG_DATA_PATH/spumux.xml"
				echo "         xoffset=\"$x\" yoffset=\"$y\"" >> "$MPEG_DATA_PATH/spumux.xml"
				echo "         transparent=\"000060\" />" >> "$MPEG_DATA_PATH/spumux.xml"
			done
			echo "  </stream>" >> "$MPEG_DATA_PATH/spumux.xml"
			echo "</subpictures>" >> "$MPEG_DATA_PATH/spumux.xml"
			# spumux.xml done
 			SPU=$MPEG_DATA_PATH
 		elif [ "!" "x$SRT" = "x" ]; then
 			echo "<subpictures>" > "$MPEG_DATA_PATH/spumux.xml"
 			echo "  <stream>" >> "$MPEG_DATA_PATH/spumux.xml"
 			echo "         <textsub filename=\"$SRT\" characterset=\"ISO8859-1\"" >> "$MPEG_DATA_PATH/spumux.xml"
 			echo "         fontsize=\"28.0\" font=\"arial.ttf\" horizontal-alignment=\"center\"" >> "$MPEG_DATA_PATH/spumux.xml"
 			echo "         vertical-alignment=\"bottom\" left-margin=\"60\" right-margin=\"60\"" >> "$MPEG_DATA_PATH/spumux.xml"
 			echo "         top-margin=\"20\" bottom-margin=\"30\" subtitle-fps=\"25\"" >> "$MPEG_DATA_PATH/spumux.xml"
 			echo "         movie-fps=\"25\" movie-width=\"720\" movie-height=\"574\"" >> "$MPEG_DATA_PATH/spumux.xml"
 			echo "      />" >> "$MPEG_DATA_PATH/spumux.xml"
 			echo "  </stream>" >> "$MPEG_DATA_PATH/spumux.xml"
 			echo "</subpictures>" >> "$MPEG_DATA_PATH/spumux.xml"
 			# spumux.xml done
 			SPU=$MPEG_DATA_PATH
		elif [ "!" "x$SUP" = "x" ]; then
			# from http://www.guru-group.fi/~too/sw/m2vmp2cut/
			/usr/lib/vdr-plugin-burn/pxsup2dast "$SUP"*
			SPU=$(find "$MPEG_DATA_PATH" -name \*.d)
		fi


		if [ ! "x$SPU" = "x" -a -f "$SPU/spumux.xml" ]; then
			mkfifo "$MPEG_TMP_PATH/subtmp.mpg"
			mplex -f 8 $MPLEX_OPTS -o "$MPEG_TMP_PATH/subtmp.mpg" "$VIDEO_FILE" $AUDIO_FILES &
			spumux -v 2 "$SPU/spumux.xml" < "$MPEG_TMP_PATH/subtmp.mpg" > "$MOVIE_FILE"
		else
			mplex -f 8 $MPLEX_OPTS -o "$MOVIE_FILE" "$VIDEO_FILE" $AUDIO_FILES
		fi
		### End Subtitles


		rm -f "$VIDEO_FILE" $AUDIO_FILES
	;;


	author)
		echo "Author $DVDAUTHOR_XML"
		dvdauthor -x "$DVDAUTHOR_XML"
	;;


	dmharchive)
		echo "Creating $TEMP_PATH/INDEX_${TRACK_ON_DVD}"
		mkdir -p "$TEMP_PATH/INDEX_${TRACK_ON_DVD}"
		cd "$DVDAUTHOR_PATH/VIDEO_TS/"
    		for i in $(seq 1 99) ; do
			if [ -f "VTS_${TRACK_ON_DVD}_$i.VOB" ] ; then
				vdr_file=`printf "%03d.vdr" $i`
				echo "Linking $DVDAUTHOR_PATH/VIDEO_TS/VTS_${TRACK_ON_DVD}_$i.VOB -> $TEMP_PATH/INDEX_${TRACK_ON_DVD}/$vdr_file"
				ln -s "$DVDAUTHOR_PATH/VIDEO_TS/VTS_${TRACK_ON_DVD}_$i.VOB" "$TEMP_PATH/INDEX_${TRACK_ON_DVD}/$vdr_file"
			else
				break
			fi
		done
	        cd "$TEMP_PATH/INDEX_${TRACK_ON_DVD}"
		genindex
		if [ "$?" != "0" ] ; then
			exit 1
		fi
		echo "Copying $TEMP_PATH/INDEX_${TRACK_ON_DVD}/index.vdr -> $RECORDING_PATH/index_archive.vdr"
		cp "$TEMP_PATH/INDEX_${TRACK_ON_DVD}/index.vdr" "$RECORDING_PATH/index_archive.vdr"
		echo "Moving $TEMP_PATH/INDEX_${TRACK_ON_DVD}/index.vdr -> $DVDAUTHOR_PATH/VIDEO_TS/index_${TRACK_ON_DVD}.vdr"
		mv "$TEMP_PATH/INDEX_${TRACK_ON_DVD}/index.vdr" "$DVDAUTHOR_PATH/VIDEO_TS/index_${TRACK_ON_DVD}.vdr"
		if [ -f "$RECORDING_PATH/info.vdr" ]; then
			echo "Copying $RECORDING_PATH/info.vdr -> $DVDAUTHOR_PATH/VIDEO_TS/info_${TRACK_ON_DVD}.vdr"
			cp "$RECORDING_PATH/info.vdr" "$DVDAUTHOR_PATH/VIDEO_TS/info_${TRACK_ON_DVD}.vdr"
		fi
		echo "Deleting $TEMP_PATH/INDEX_${TRACK_ON_DVD}"
		rm -rf "$TEMP_PATH/INDEX_${TRACK_ON_DVD}"
		echo "Creating $RECORDING_PATH/dvd.vdr"
		cp "$CONFIG_PATH/counters/standard" "$RECORDING_PATH/dvd.vdr"
		printf "%04d\n" $(echo ${TRACK_ON_DVD} | sed 's/^0*//') >> "$RECORDING_PATH/dvd.vdr"
	;;


	archivemark)
		echo "Creating $DVDAUTHOR_PATH/dvd.vdr"
		cp "$CONFIG_PATH/counters/standard" "$DVDAUTHOR_PATH/dvd.vdr"
		((DVD_ID = `cat $CONFIG_PATH/counters/standard | sed "s/^0*//"` + 1))
		printf "%04d\n" $DVD_ID > "$CONFIG_PATH/counters/standard"
	;;


	mkiso)
		genisoimage -V "$DISC_ID" -dvd-video "$DVDAUTHOR_PATH" > "$ISO_FILE"
	;;


	burndir)
		SPEED=""
		if [ $BURN_SPEED -gt 0 ]; then
			SPEED="-speed=$BURN_SPEED"
		fi
		growisofs -use-the-force-luke=tty $SPEED -dvd-compat -Z "$DVD_DEVICE" \
				  -V "$DISC_ID" -dvd-video "$DVDAUTHOR_PATH"
	;;


    burndircd)
        SPEED=""
        if [ $BURN_SPEED -gt 0 ]; then
        	SPEED="speed=$(($BURN_SPEED * 4))"
        fi
        genisoimage -V "$DISC_ID" -dvd-video "$DVDAUTHOR_PATH" \
			| cdrecord "dev=$DVD_DEVICE" driveropts=burnfree fs=10m $SPEED -
    ;;


	pipeiso)
		genisoimage -V "$DISC_ID" -dvd-video "$DVDAUTHOR_PATH" \
			| tee "$ISO_FILE" > "$ISO_PIPE"
	;;


	burniso)
		SPEED=""
		if [ $BURN_SPEED -gt 0 ]; then
			SPEED="-speed=$BURN_SPEED"
		fi
		growisofs -use-the-force-luke=tty $SPEED -dvd-compat \
				  -Z "$DVD_DEVICE=$ISO_PIPE"
	;;


	burnisocd)
		SPEED=""
		if [ $BURN_SPEED -gt 0 ]; then
			SPEED="speed=$(($BURN_SPEED * 4))"
		fi
		cdrecord "dev=$DVD_DEVICE" driveropts=burnfree $SPEED fs=10m "$ISO_PIPE"
	;;


	*)
		echo "Usage: $0 {demux}"
		exit 1
	;;
esac


exit $?
root@siduxbox:/usr/share/vdr-plugin-burn#