Das Antennensignal (Kabelanschluß) sollte funktionieren - eine DBox 2 geht ohne Probleme.
Hier die gewünschten Infos:
easyVDR:~# lsmod
Module Size Used by
parport_pc 38084 0
parport 34888 1 parport_pc
pcspkr 3072 0
i2c_piix4 8460 0
tda10023 6404 1
budget_av 20224 0
budget_core 11140 1 budget_av
lirc_serial 13536 1
lirc_dev 14676 1 lirc_serial
ipv6 242784 12
intel_agp 21788 1
agpgart 32944 1 intel_agp
kbtab 5632 0
cx88_vp3054_i2c 4224 0
cx8802 17540 0
cx88xx 65572 1 cx8802
ir_common 34308 1 cx88xx
btcx_risc 4744 2 cx8802,cx88xx
video_buf_dvb 6532 0
ivtv 125328 0
cx2341x 11396 1 ivtv
tveeprom 14480 2 cx88xx,ivtv
b2c2_flexcop_pci 9752 0
b2c2_flexcop 29196 1 b2c2_flexcop_pci
dvb_pll 14212 2 budget_av,b2c2_flexcop
mt312 7428 0
cx24110 7812 0
usbhid 50848 0
tda1004x 14724 0
ves1820 6404 0
stv0299 10248 0
ves1x93 6660 0
eeprom 7184 0
dvb_ttpci 95972 0
dvb_core 76968 6 budget_av,budget_core,video_buf_dvb,b2c2_flexcop,stv0299,dvb_ttpci
saa7146_vv 45952 2 budget_av,dvb_ttpci
video_buf 23556 4 cx8802,cx88xx,video_buf_dvb,saa7146_vv
saa7146 18184 4 budget_av,budget_core,dvb_ttpci,saa7146_vv
ttpci_eeprom 2560 2 budget_core,dvb_ttpci
i2c_viapro 8724 0
usb_storage 79168 0
ehci_hcd 31112 0
ohci_hcd 20484 0
uhci_hcd 23052 0
videodev 28032 3 cx88xx,ivtv,saa7146_vv
v4l2_common 15360 5 cx88xx,ivtv,cx2341x,saa7146_vv,videodev
v4l1_compat 13316 3 ivtv,saa7146_vv,videodev
hwmon_vid 3456 0
i2c_isa 5248 0
evdev 9856 0
snd_via82xx 27160 0
gameport 15240 1 snd_via82xx
snd_ac97_codec 85792 1 snd_via82xx
snd_ac97_bus 2432 1 snd_ac97_codec
snd_mpu401_uart 8320 1 snd_via82xx
snd_rawmidi 24352 1 snd_mpu401_uart
snd_seq_device 8076 1 snd_rawmidi
psmouse 36744 0
e100 33928 0
em8300 63760 8
adv717x 7588 1
mii 5760 1 e100
snd_pcm 75656 3 snd_via82xx,snd_ac97_codec,em8300
snd_timer 23684 1 snd_pcm
snd_page_alloc 9992 2 snd_via82xx,snd_pcm
i2c_algo_bit 8968 4 cx88_vp3054_i2c,cx88xx,ivtv,em8300
i2c_core 21136 23 i2c_piix4,tda10023,budget_av,budget_core,cx88_vp3054_i2c,cx88xx,ivtv,tveeprom,b2c2_flexcop,dvb_pll,mt312,cx24110,tda1004x,ves1820,stv0299,ves1x93,eeprom,dvb_ttpci,ttpci_eeprom,i2c_viapro,i2c_isa,adv717x,i2c_algo_bit
snd 50148 8 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,em8300,snd_pcm,snd_timer
soundcore 9952 2 em8300,snd
unix 26800 20
Linux version 2.6.18.3 (root@easyVDR) (gcc-Version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13sarge1)) #1 PREEMPT Sun Nov 19 18:00:30 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
512MB LOWMEM available.
On node 0 totalpages: 131072
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 126976 pages, LIFO batch:31
DMI 2.1 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000e0010
ACPI: RSDT (v001 COMPAQ CPQB053 0x19990821 0x00000000) @ 0x000e0080
ACPI: FADT (v001 COMPAQ SCARAB 0x00000001 0x00000000) @ 0x000e00cc
ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000b) @ 0x000e09c3
ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000b) @ 0x000e19c0
ACPI: SSDT (v001 COMPAQ PME 0x00000001 MSFT 0x0100000b) @ 0x000e2134
ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf808
Allocating PCI resources starting at 30000000 (gap: 20000000:dffc0000)
Detected 697.010 MHz processor.
Built 1 zonelists. Total pages: 131072
Kernel command line: auto BOOT_IMAGE=VDR-2.6.18.3 root=303 apm=off elevator=cfq logs=0 acpi=on
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01402000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512604k/524288k available (4453k kernel code, 11208k reserved, 1493k data, 344k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1394.41 BogoMIPS (lpj=69720

Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium III (Coppermine) stepping 03
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0800)
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xed8e3, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Firmware left 0000:00:0a.0 e100 interrupts enabled, disabling
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region f800-f83f claimed by PIIX4 ACPI
PCI quirk: region fc00-fc0f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:0c: ioport range 0x15c-0x15d has been reserved
pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0d: ioport range 0xf800-0xf81f could not be reserved
pnp: 00:0d: ioport range 0xf820-0xf83f has been reserved
pnp: 00:0d: ioport range 0xfc00-0xfc0f has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 1000-1fff
MEM window: 40000000-400fffff
PREFETCH window: 41000000-41ffffff
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 65536 bind 3276

TCP reno registered
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996
okir@monad.swb.de).
NTFS driver 2.1.27 [Flags: R/W].
fuse init (API version 7.7)
cdfs 2.6.17 loaded.
JFS: nTxBlock = 4005, nTxLock = 32043
SGI XFS with ACLs, security attributes, realtime, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.3.3
OCFS2 Node Manager 1.3.3
OCFS2 DLM 1.3.3
OCFS2 DLMFS 1.3.3
OCFS2 User DLM kernel interface loaded
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
vesafb: framebuffer at 0x41000000, mapped to 0xe0a80000, using 1875k, total 4096k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:48d6
vesafb: pmi: set display start = c00c497a, set palette = c00c49f2
vesafb: pmi: ports = 1085 101f 10b4 10b8 1018 1014 10c0 10c3 10c1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
ACPI: Power Button (CM) [PBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:14.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2040-0x2047, BIOS settings: hda

MA, hdb:pio
ide1: BM-DMA at 0x2048-0x204f, BIOS settings: hdc

MA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD1200UE-00KVT0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 2.00 loaded.
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e

S2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@redhat.com
device-mapper: multipath: version 1.0.4 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: (supports S0 S1 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 344k freed
NET: Registered protocol family 1
Adding 1052216k swap on /dev/hda1. Priority:-1 extents:1 across:1052216k
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
adv717x: no version for "struct_module" found: kernel tainted.
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
em8300: EM8300 8300 (rev 2) bus: 0, devfn: 112, irq: 11, memory: 0x42100000.
em8300: mapped-memory at 0xe0d80000
em8300: using MTRR
em8300_main.o: Chip revision: 2
adv717x.o: ADV7170 chip detected
adv717x.o: Configuring for PAL 60
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0x42000000, irq 11, MAC addr 00:50:8B:91:F0:AC
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Linux video capture interface: v2.00
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:14.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:14.2: UHCI Host Controller
uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:14.2: irq 11, io base 0x00002020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
saa7146: register extension 'dvb'.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.10.2 (v4l-dvb + ivtv virtual merge) Revision: 3912 loading
ivtv: Linux version: 2.6.18.3 preempt mod_unload 386 REGPARM gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv: ==================== END INIT IVTV ====================
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
usbcore: registered new driver kbtab
drivers/usb/input/kbtab.c: v0.0.2:USB KB Gear JamStudio Tablet driver
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0x44000000
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
lirc_dev: IR Remote Control driver registered, at major 61
lirc_serial: auto-detected active high receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
saa7146: register extension 'budget_av'.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
saa7146: found saa7146 @ mem e0fb8000 (revision 1, irq 11) (0x1894,0x002c).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (Satelco EasyWatch DVB-C MK3).
adapter failed MAC signature check
encoded MAC from EEPROM was ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff
KNC1-0: MAC addr = 00:09:d6:6d:6f:ab
DVB: registering frontend 0 (Philips TDA10023 DVB-C)...
budget-av: ci interface initialised.
adv717x.o: Configuring for PAL
em8300_audio.o: Analog audio enabled
em8300: Microcode version 0x2d loaded
adv717x.o: Configuring for PAL
eth0: no IPv6 routers present
piix4_smbus 0000:00:14.3: Found 0000:00:14.3 device
input: PC Speaker as /class/input/input1
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x77

, irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]