Dolby Sound nicht über HDMI vorhanden

Steffmaster · 8. Januar 2012

Morgen!

Ich dache anfänglich, dass ich nur im Mplayer kein Dolby hätte. jedoch habe ich allgemein keinen Dolby Sound. Bei Pro7 z.B. wenn ich da auf Dolby umschalte bekomme ich nur sone Art zischeln/piepsen/kratzen ... Ich habe den Yavdr 0.4 frisch aufgesetzt und noch nichts verändert/modifiziert. Also alles noch orginal. Anfängliche Probleme mit der FB wurden beseitigt. Im Prinzip läuft alles tadellos bis auf den Dolby Sound.
Den Ton an sich bekomme ich genau wie das Bild über HDMI (ASUS EN 210) Meinen Recherchen zufolge poste ich schon mal eventuell relevante Dateien.

asound.conf:

Code

pcm.!default {
	type hw
	card 0
	device 3
}

xine/config:

Code

#
# xine config file
#
.version:2


# Entries which are still set to their default values are commented out.
# Remove the '#' at the beginning of the line, if you want to change them.


# Enable deinterlacing by default
# bool, default: 0
gui.deinterlace_by_default:1


# Configuration experience level
# { Beginner  Advanced  Expert  Master of the known universe }, default: 0
gui.experience_level:Master of the known universe


# Enable OSD support
# bool, default: 1
gui.osd_enabled:0


# Dismiss OSD time (s)
# numeric, default: 3
#gui.osd_timeout:3


# Ask user for playback with unsupported codec
# bool, default: 0
#gui.play_anyway:0


# Automatically reload old playlist
# bool, default: 0
#gui.playlist_auto_reload:0


# Audio visualization plugin
# { goom  oscope  fftscope  fftgraph }, default: 0
#gui.post_audio_plugin:goom


# gui skin theme
# { xinetic }, default: 0
#gui.skin:xinetic


# Change xine's behavior for unexperienced user
# bool, default: 1
#gui.smart_mode:1


# Snapshot location
# string, default: /var/lib/vdr
#gui.snapshotdir:/var/lib/vdr


# Subtitle autoloading
# bool, default: 1
#gui.subtitle_autoload:1


# Visual animation style
# { None  Post Plugin  Stream Animation }, default: 1
#gui.visual_anim:Post Plugin


# Windows stacking (more)
# bool, default: 0
#gui.always_layer_above:0


# Audio mixer control method
# { Sound card  Software }, default: 0
#gui.audio_mixer_method:Sound card


# Visiblility behavior of panel
# bool, default: 0
#gui.auto_panel_visibility:0


# Visibility behavior of output window
# bool, default: 0
#gui.auto_video_output_visibility:0


# Deinterlace plugin.
# string, default: tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
#gui.deinterlace_plugin:tvtime:method=LinearBlend,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1


# Event sender behavior
# bool, default: 1
#gui.eventer_sticky:1


# Windows stacking
# bool, default: 0
#gui.layer_above:0


# Use unscaled OSD
# bool, default: 1
#gui.osd_use_unscaled:1


# Screensaver reset interval (s)
# numeric, default: 10
#gui.screensaver_timeout:10


# Menu shortcut style
# { Windows style  Emacs style }, default: 0
#gui.shortcut_style:Windows style


# Stream information
# bool, default: 0
#gui.sinfo_auto_update:0


# Skin Server Url
# string, default: http://xine.sourceforge.net/skins/skins.slx
#gui.skin_server_url:http://xine.sourceforge.net/skins/skins.slx


# Chapter hopping
# bool, default: 1
#gui.skip_by_chapter:1


# New stream sizes resize output window
# bool, default: 1
#gui.stream_resize_window:1


# Tips timeout (ms)
# numeric, default: 5000
#gui.tips_timeout:5000


# gui tips visibility
# bool, default: 1
#gui.tips_visible:1


# Name of video display
# string, default: 
#gui.video_display:


# Synchronized X protocol (debug)
# bool, default: 0
#gui.xsynchronize:0


# Double size for small streams (require stream_resize_window)
# bool, default: 0
#gui.zoom_small_stream:0


# Logo MRL
# string, default: /usr/share/xine/skins/xine-ui_logo.png
#gui.logo_mrl:/usr/share/xine/skins/xine-ui_logo.png


# use XVidModeExtension when switching to fullscreen
# bool, default: 0
#gui.use_xvidext:0


# height for xinerama fullscreen (-8192 = autodetect)
# numeric, default: -8192
#gui.xinerama_fullscreen_height:-8192


# width for xinerama fullscreen (-8192 = autodetect)
# numeric, default: -8192
#gui.xinerama_fullscreen_width:-8192


# x coordinate for xinerama fullscreen (-8192 = autodetect)
# numeric, default: -8192
#gui.xinerama_fullscreen_x:-8192


# y coordinate for xinerama fullscreen (-8192 = autodetect)
# numeric, default: -8192
#gui.xinerama_fullscreen_y:-8192


# Screens to use in order to do a very fullscreen in xinerama mode. (example 0 2 3)
# string, default: 0 1
#gui.xinerama_use_screens:0 1


# Amplification level
# [0..200], default: 100
#gui.amp_level:100


# gui panel visibility
# bool, default: 1
#gui.panel_visible:1


# numeric, default: 200
#gui.panel_x:200


# numeric, default: 100
#gui.panel_y:100


# [0..65535], default: -1
#gui.vo_brightness:-1


# [0..65535], default: -1
#gui.vo_contrast:-1


# [0..65535], default: -1
#gui.vo_hue:-1


# [0..65535], default: -1
#gui.vo_noise_reduction:-1


# [0..65535], default: -1
#gui.vo_saturation:-1


# [0..65535], default: -1
#gui.vo_sharpness:-1


# color specification yuv-opacity
# string, default: 8080c0-f
#gui.osdmenu.color_focused_button:8080c0-f


# color specification yuv-opacity
# string, default: 808080-f
#gui.osdmenu.color_focused_slider:808080-f


# color specification yuv-opacity
# string, default: ff8080-f
#gui.osdmenu.color_focused_slider_knob:ff8080-f


# color specification yuv-opacity
# string, default: 808080-f
#gui.osdmenu.color_focused_text_border:808080-f


# color specification yuv-opacity
# string, default: ff8080-f
#gui.osdmenu.color_focused_text_foreground:ff8080-f


# color specification yuv-opacity
# string, default: 0080c0-f
#gui.osdmenu.color_label_border:0080c0-f


# color specification yuv-opacity
# string, default: c08080-f
#gui.osdmenu.color_label_foreground:c08080-f


# color specification yuv-opacity
# string, default: 0080c0-f
#gui.osdmenu.color_label_window:0080c0-f


# color specification yuv-opacity
# string, default: 008000-f
#gui.osdmenu.color_slider:008000-f


# color specification yuv-opacity
# string, default: ffff00-f
#gui.osdmenu.color_slider_knob:ffff00-f


# color specification yuv-opacity
# string, default: 008000-f
#gui.osdmenu.color_text_border:008000-f


# color specification yuv-opacity
# string, default: ffff00-f
#gui.osdmenu.color_text_foreground:ffff00-f


# color specification yuv-opacity
# string, default: 0080c0-f
#gui.osdmenu.color_text_window:0080c0-f


# directory a media in dvd device will be mounted
# string, default: /dvd
#gui.osdmenu.dvd_mountpoint:/dvd


# palette (foreground-border-background) to use for subtitles and OSD
# { white-black-transparent  white-none-transparent  white-none-translucid  yellow-black-transparent }, default: 0
#ui.osd.text_palette:white-black-transparent


# audio driver to use
# { auto  null  pulseaudio  alsa  oss  jack  esd  file  none }, default: 0
audio.driver:alsa


# use A/52 dynamic range compression
# bool, default: 0
audio.a52.dynamic_range:1


# downmix audio to 2 channel surround stereo
# bool, default: 0
#audio.a52.surround_downmix:0


# A/52 volume
# [0..200], default: 100
audio.a52.level:200


# device used for mono output
# string, default: default
audio.device.alsa_default_device:plughw:0,7


# device used for stereo output
# string, default: plug:front:default
audio.device.alsa_front_device:plughw:0,7


# alsa mixer device
# string, default: PCM
#audio.device.alsa_mixer_name:PCM


# sound card can do mmap
# bool, default: 0
audio.device.alsa_mmap_enable:1


# device used for 5.1-channel output
# string, default: iec958:AES0=0x6,AES1=0x82,AES2=0x0,AES3=0x2
audio.device.alsa_passthrough_device:plughw:0,7


# device used for 4-channel output
# string, default: plug:surround40:0
audio.device.alsa_surround40_device:plughw:0,7


# device used for 5.1-channel output
# string, default: plug:surround51:0
audio.device.alsa_surround51_device:plughw:0,7


# speaker arrangement
# { Mono 1.0  Stereo 2.0  Headphones 2.0  Stereo 2.1  Surround 3.0  Surround 4.0  Surround 4.1  Surround 5.0  Surround 5.1  Surround 6.0  Surround 6.1  Surround 7.1  Pass Through }, default: 1
audio.output.speaker_arrangement:Pass Through


# offset for digital passthrough
# numeric, default: 0
#audio.synchronization.passthrough_offset:0


# play audio even on slow/fast speeds
# bool, default: 0
#audio.synchronization.slow_fast_audio:0


# method to sync audio and video
# { metronom feedback  resample }, default: 0
audio.synchronization.av_sync_method:resample


# always resample to this rate (0 to disable)
# numeric, default: 0
audio.synchronization.force_rate:48000


# enable resampling
# { auto  off  on }, default: 0
audio.synchronization.resample_mode:on


# startup audio volume
# [0..100], default: 50
audio.volume.mixer_volume:75


# restore volume level at startup
# bool, default: 0
#audio.volume.remember_volume:0


# video driver to use
# { auto  vdpau  dxr3  aadxr3  xv  opengl  raw  xshm  caca  aa  xxmc  none  sdl  fb  xvmc }, default: 0
#video.driver:auto


# disable all video scaling
# bool, default: 0
#video.output.disable_scaling:0


# horizontal image position in the output window
# [0..100], default: 50
#video.output.horizontal_position:50


# vdpau: color of none video area in output window
# numeric, default: 0
#video.output.vdpau_background_color:0


# vdpau: Use lock display synchronization for some vdpau calls (workaround for buggy libX11/xcb)
# bool, default: 1
#video.output.vdpau_enable_buggy_xcb_workaround:1


# vdpau: Try to recreate progressive frames from pulldown material
# bool, default: 1
video.output.vdpau_enable_inverse_telecine:0


# vdpau: HD deinterlace method
# { bob  half temporal  half temporal_spatial  temporal  temporal_spatial }, default: 3
video.output.vdpau_hd_deinterlace_method:bob


# vdpau: disable deinterlacing when progressive_frame flag is set
# bool, default: 0
#video.output.vdpau_honor_progressive:0


# vdpau: Scaling Quality
# [0..1], default: 0
#video.output.vdpau_scaling_quality:0


# vdpau: SD deinterlace method
# { bob  half temporal  half temporal_spatial  temporal  temporal_spatial }, default: 3
#video.output.vdpau_sd_deinterlace_method:temporal


# vdpau: restrict enabling video properties for SD video only
# { none  noise  sharpness  noise+sharpness }, default: 0
#video.output.vdpau_sd_only_properties:none


# vdpau: disable advanced deinterlacers chroma filter
# bool, default: 0
video.output.vdpau_skip_chroma_deinterlace:1


# vdpau: disable studio level
# bool, default: 0
#video.output.vdpau_studio_levels:0


# vertical image position in the output window
# [0..100], default: 50
#video.output.vertical_position:50


# default length of display queue
# numeric, default: 3
video.output.vdpau_display_queue_length:4


# Choose speed over specification compliance
# bool, default: 0
video.processing.ffmpeg_choose_speed_over_accuracy:1


# MPEG-4 postprocessing quality
# [0..6], default: 3
video.processing.ffmpeg_pp_quality:0


# Skip loop filter
# { default  none  nonref  bidir  nonkey  all }, default: 0
video.processing.ffmpeg_skip_loop_filter:all


# FFmpeg video decoding thread count
# numeric, default: 1
#video.processing.ffmpeg_thread_count:1


# device used for CD audio
# string, default: /dev/cdrom
#media.audio_cd.device:/dev/cdrom


# slow down disc drive to this speed factor
# numeric, default: 4
#media.audio_cd.drive_slowdown:4


# query CDDB
# bool, default: 1
#media.audio_cd.use_cddb:1


# CDDB server port
# numeric, default: 8880
#media.audio_cd.cddb_port:8880


# CDDB server name
# string, default: freedb.freedb.org
#media.audio_cd.cddb_server:freedb.freedb.org


# directory for saving streams
# string, default: 
#media.capture.save_dir:


# Number of dvb card to use.
# numeric, default: 0
#media.dvb.adapter:0


# Remember last DVB channel watched
# bool, default: 1
#media.dvb.remember_channel:1


# Number of seconds until tuning times out.
# numeric, default: 0
#media.dvb.tuning_timeout:0


# Enable the DVB GUI
# bool, default: 1
#media.dvb.gui_enabled:1


# Last DVB channel viewed
# numeric, default: -1
#media.dvb.last_channel:-1


# default language for DVD playback
# string, default: en
#media.dvd.language:en


# region the DVD player claims to be in (1 to 8)
# numeric, default: 1
#media.dvd.region:1


# device used for DVD playback
# string, default: /dev/dvd
#media.dvd.device:/dev/dvd


# read-ahead caching
# bool, default: 1
#media.dvd.readahead:1


# play mode when title/chapter is given
# { entire dvd  one chapter }, default: 0
#media.dvd.play_single_chapter:entire dvd


# unit for seeking
# { seek in program chain  seek in program }, default: 0
#media.dvd.seek_behaviour:seek in program chain


# unit for the skip action
# { skip program  skip part  skip title }, default: 0
#media.dvd.skip_behaviour:skip program


# file browsing start location
# string, default: /
#media.files.origin_path:/


# list hidden files
# bool, default: 0
#media.files.show_hidden_files:0


# network bandwidth
# { 14.4 Kbps (Modem)  19.2 Kbps (Modem)  28.8 Kbps (Modem)  33.6 Kbps (Modem)  34.4 Kbps (Modem)  57.6 Kbps (Modem)  115.2 Kbps (ISDN)  262.2 Kbps (Cable/DSL)  393.2 Kbps (Cable/DSL)  524.3 Kbps (Cable/DSL) }, default: 10


# Timeout for network stream reading (in seconds)
# numeric, default: 30
#media.network.timeout:30


# Domains for which to ignore the HTTP proxy
# string, default: 
#media.network.http_no_proxy:


# HTTP proxy host
# string, default: 
#media.network.http_proxy_host:


# HTTP proxy password
# string, default: 
#media.network.http_proxy_password:


# HTTP proxy port
# numeric, default: 80
#media.network.http_proxy_port:80


# HTTP proxy username
# string, default: 
#media.network.http_proxy_user:


# MMS protocol
# { auto  TCP  HTTP }, default: 0
#media.network.mms_protocol:auto


# automatically advance VCD track/entry
# bool, default: 1
#media.vcd.autoadvance:1


# VCD default type to use on autoplay
# { MPEG track  entry  segment  playback-control item }, default: 3
#media.vcd.autoplay:playback-control item


# CD-ROM drive used for VCD when none given
# string, default: 
#media.vcd.device:


# VCD position slider range
# { auto  track  entry }, default: 0
#media.vcd.length_reporting:auto


# show 'rejected' VCD LIDs
# bool, default: 0
#media.vcd.show_rejected:0


# VCD format string for stream comment field
# string, default: %P - Track %T
#media.vcd.comment_format:%P - Track %T


# VCD debug flag mask
# numeric, default: 0
#media.vcd.debug:0


# VCD format string for display banner
# string, default: %F - %I %N%L%S, disk %c of %C - %v %A
#media.vcd.title_format:%F - %I %N%L%S, disk %c of %C - %v %A


# default VDR host
# string, default: xvdr://127.0.0.1#nocache;demux:mpeg_block
#media.xvdr.default_mrl:xvdr://127.0.0.1#nocache;demux:mpeg_block


# Fast (low-quality) OSD scaling
# bool, default: 0
#media.xvdr.fast_osd_scaling:0


# number of buffers for HD content
# numeric, default: 2500
#media.xvdr.num_buffers_hd:2500


# SCR-Treshold for HD-Playback (%)
# numeric, default: 40
#media.xvdr.scr_treshold_hd:40


# SCR-Treshold for SD-Playback (%)
# numeric, default: 50
#media.xvdr.scr_treshold_sd:50


# SRC tuning step
# numeric, default: 5000
media.xvdr.scr_tuning_step:50


# Smoother SRC tuning
# bool, default: 0
#media.xvdr.smooth_scr_tuning:0


# path to RealPlayer codecs
# string, default: 
#decoder.external.real_codecs_path:


# opacity for the black parts of bitmapped subtitles
# [0..100], default: 67
#subtitles.bitmap.black_opacity:67


# opacity for the colour parts of bitmapped subtitles
# [0..100], default: 100
#subtitles.bitmap.colour_opacity:100


# subtitle size
# { tiny  small  normal  large  very large  huge }, default: 1
#subtitles.separate.subtitle_size:small


# subtitle vertical offset
# numeric, default: 0
#subtitles.separate.vertical_offset:0


# font for subtitles
# string, default: sans
#subtitles.separate.font:sans


# font for subtitles
# string, default: 
#subtitles.separate.font_freetype:


# whether to use a freetype font
# bool, default: 0
#subtitles.separate.font_use_freetype:0


# encoding of the subtitles
# string, default: iso-8859-1
#subtitles.separate.src_encoding:iso-8859-1


# use unscaled OSD if possible
# bool, default: 1
#subtitles.separate.use_unscaled_osd:1


# frames per second to generate
# numeric, default: 14
#effects.goom.fps:14


# goom image height
# numeric, default: 240
#effects.goom.height:240


# goom image width
# numeric, default: 320
#effects.goom.width:320


# colour space conversion method
# { Fast but not photorealistic  Slow but looks better }, default: 0
#effects.goom.csc_method:Fast but not photorealistic


# number of audio buffers
# numeric, default: 230
engine.buffers.audio_num_buffers:800


# number of video buffers
# numeric, default: 500
engine.buffers.video_num_buffers:1800


# default number of video frames
# numeric, default: 15
engine.buffers.video_num_frames:22


# disable decoder flush at discontinuity
# bool, default: 0
#engine.decoder.disable_flush_at_discontinuity:0


# disable decoder flush from video out
# bool, default: 0
engine.decoder.disable_flush_from_video_out:1


# priority for a/52 decoder
# numeric, default: 0
#engine.decoder_priorities.a/52:0


# priority for bitplane decoder
# numeric, default: 0
#engine.decoder_priorities.bitplane:0


# priority for dts decoder
# numeric, default: 0
#engine.decoder_priorities.dts:0


# priority for dvaudio decoder
# numeric, default: 0
#engine.decoder_priorities.dvaudio:0


# priority for dxr3-mpeg2 decoder
# numeric, default: 0
#engine.decoder_priorities.dxr3-mpeg2:0


# priority for dxr3-spudec decoder
# numeric, default: 0
#engine.decoder_priorities.dxr3-spudec:0


# priority for faad decoder
# numeric, default: 0
#engine.decoder_priorities.faad:0


# priority for ffmpeg-wmv8 decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv8:0


# priority for ffmpeg-wmv9 decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpeg-wmv9:0


# priority for ffmpegaudio decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpegaudio:0


# priority for ffmpegvideo decoder
# numeric, default: 0
#engine.decoder_priorities.ffmpegvideo:0


# priority for flacdec decoder
# numeric, default: 0
#engine.decoder_priorities.flacdec:0


# priority for gdkpixbuf decoder
# numeric, default: 0
#engine.decoder_priorities.gdkpixbuf:0


# priority for gsm610 decoder
# numeric, default: 0
#engine.decoder_priorities.gsm610:0


# priority for image decoder
# numeric, default: 0
#engine.decoder_priorities.image:0


# priority for mad decoder
# numeric, default: 0
#engine.decoder_priorities.mad:0


# priority for mpc decoder
# numeric, default: 0
#engine.decoder_priorities.mpc:0


# priority for mpeg2 decoder
# numeric, default: 0
#engine.decoder_priorities.mpeg2:0


# priority for nsfdec decoder
# numeric, default: 0
#engine.decoder_priorities.nsfdec:0


# priority for pcm decoder
# numeric, default: 0
#engine.decoder_priorities.pcm:0


# priority for realadec decoder
# numeric, default: 0
#engine.decoder_priorities.realadec:0


# priority for realvdec decoder
# numeric, default: 0
#engine.decoder_priorities.realvdec:0


# priority for rgb decoder
# numeric, default: 0
#engine.decoder_priorities.rgb:0


# priority for speex decoder
# numeric, default: 0
#engine.decoder_priorities.speex:0


# priority for spucc decoder
# numeric, default: 0
#engine.decoder_priorities.spucc:0


# priority for spucmml decoder
# numeric, default: 0
#engine.decoder_priorities.spucmml:0


# priority for spudec decoder
# numeric, default: 0
#engine.decoder_priorities.spudec:0


# priority for spudvb decoder
# numeric, default: 0
#engine.decoder_priorities.spudvb:0


# priority for spuhdmv decoder
# numeric, default: 0
#engine.decoder_priorities.spuhdmv:0


# priority for sputext decoder
# numeric, default: 0
#engine.decoder_priorities.sputext:0


# priority for theora decoder
# numeric, default: 0
#engine.decoder_priorities.theora:0


# priority for vdpau_h264 decoder
# numeric, default: 0
#engine.decoder_priorities.vdpau_h264:0


# priority for vdpau_h264_alter decoder
# numeric, default: 0
#engine.decoder_priorities.vdpau_h264_alter:0


# priority for vdpau_mpeg12 decoder
# numeric, default: 0
#engine.decoder_priorities.vdpau_mpeg12:0


# priority for vdpau_mpeg4 decoder
# numeric, default: 0
#engine.decoder_priorities.vdpau_mpeg4:0


# priority for vdpau_vc1 decoder
# numeric, default: 0
#engine.decoder_priorities.vdpau_vc1:0


# priority for vorbis decoder
# numeric, default: 0
#engine.decoder_priorities.vorbis:0


# priority for wavpackdec decoder
# numeric, default: 0
#engine.decoder_priorities.wavpackdec:0


# priority for yuv decoder
# numeric, default: 0
#engine.decoder_priorities.yuv:0


# media format detection strategy
# { default  reverse  content  extension }, default: 0
#engine.demux.strategy:default


# memcopy method used by xine
# { probe  libc  kernel  mmx  mmxext  sse }, default: 0
engine.performance.memcpy_method:libc


# percentage of discarded frames to tolerate
# numeric, default: 10
engine.performance.warn_discarded_threshold:100


# percentage of skipped frames to tolerate
# numeric, default: 10
engine.performance.warn_skipped_threshold:100


# allow implicit changes to the configuration (e.g. by MRL)
# bool, default: 0
#misc.implicit_config:0

Alles anzeigen

die Ausgabe von aplay -l

Code

**** Liste der Hardware-GerÃ¤te (PLAYBACK) ****
Karte 0: NVidia [HDA NVidia], GerÃ¤t 3: HDMI 0 [HDMI 0]
  Sub-GerÃ¤te: 1/1
  Sub-GerÃ¤t #0: subdevice #0
Karte 0: NVidia [HDA NVidia], GerÃ¤t 7: HDMI 0 [HDMI 0]
  Sub-GerÃ¤te: 0/1
  Sub-GerÃ¤t #0: subdevice #0
Karte 0: NVidia [HDA NVidia], GerÃ¤t 8: HDMI 0 [HDMI 0]
  Sub-GerÃ¤te: 1/1
  Sub-GerÃ¤t #0: subdevice #0
Karte 0: NVidia [HDA NVidia], GerÃ¤t 9: HDMI 0 [HDMI 0]
  Sub-GerÃ¤te: 1/1
  Sub-GerÃ¤t #0: subdevice #0

Alles anzeigen

Ich hoffe ihr könnt mir weiter helfen. Also wie schon geschrieben. Stereo Ton geht, Dolby kommt zwar was, aber halt nur dieses Pfeifen.

crazyPower · 8. Januar 2012

Hi,

das Zischeln und pfeifen kommt bei mir auch, wenn ich Dolby über meinen ausgeschalteten AV Receiver an den Fernseher gebe. Wenn ich den AV Receiver anmache kommt einwandfreier Dolby Ton über die Anlage. Hast du denn über das Webmenu Dolby über HDMI aktiviert?

cu

cp

Steffmaster · 8. Januar 2012

Hallo!

Im WebInterface habe ich unter Audio auf "Pass Through" gestellt wenn du dieses meinst?

Ich gehe mit dem HDMI Kabel direkt in meinen Panasonic VT30. Von dort dann über den Optischen Audio Rückkanal in den Reciver. Ich habe weder am TV, noch über den Verstärker einen Dolby Ton. Das zischeln kommt bei beiden Geräten. Einen fehler im TV würde ich jetzt mal ausschließen, weil ich über meine PS3, die genauso über HDMI mit dem TV verbunden ist und dort das Dolby Signal wiedergegeben wird. Hmm.

Steffmaster · 8. Januar 2012

EDIT:

Boah, von der PS3 kommt zwar ein Dolbysignal, wird aber nur als Stereo Ton wiedergegeben. Also hier habe ich ein Prob, was den VT 30 angeht.

Nun, da ich keinen Reciver mit HDMI Eingänge habe, muß ich wieder den Digitalen Ausgang meiner Nexus FF nehmen. Bild soll aber weiter hin über die Asus Graka per HDMI kommen. Kann ich das so machen? Also den Sound und Bild so aufsplitten? Wenn ja, wo muß ich ansetzten?

Danke

g3joker · 8. Januar 2012

him

nur zum verständnis: wenn man per hdmi in den tv reingeht und dann das audio-signal über den vorhandenen optischen ausgang abgreift um dieses in den verstärker zu geben hat man immer zur dolby digital 2.0 in dem fall deines fernsehers hat der tv zwar nen eingebauten bass, es wird aber trotzdem nur dd 2.0 ausgegeben.

btw : deine ps3 gibt auch dolby digital aus, allerdings nur dolby digital 2.0. dolby digital heißt nicht automatisch dolby digital 5.1 .

die einzige möglichkeit (von der ff-karte mal abgesehen) um an den 5.1-sound per hdmi zu kommen ist ein neuer av-reciever mit hdmi.

ich frage mich sowieso warum man sich SO nen sauteuren plasma kauft und dann nichtmal nen av-reciever mit hdmi hat...für unter 300 euro gibts da schhon was gescheites...

so ist das nun mal mit der sch*** technik, am bezahlen bleibt man immer um alles nutzen zu können

fnu · 8. Januar 2012

Zitat von Steffmaster

Nun, da ich keinen Reciver mit HDMI Eingänge habe, muß ich wieder den Digitalen Ausgang meiner Nexus FF nehmen.

Warum das denn, hat Dein Mainboard kein S/P-DIF Ausgang? Also zumindest einen OnBoard Header haben die meisten ...

Regards
fnu

BOP · 8. Januar 2012

Zitat von g3joker

nur zum verständnis: wenn man per hdmi in den tv reingeht und dann das audio-signal über den vorhandenen optischen ausgang abgreift um dieses in den verstärker zu geben hat man immer zur dolby digital 2.0 in dem fall deines fernsehers hat der tv zwar nen eingebauten bass, es wird aber trotzdem nur dd 2.0 ausgegeben.

btw : deine ps3 gibt auch dolby digital aus, allerdings nur dolby digital 2.0. dolby digital heißt nicht automatisch dolby digital 5.1 .

Es gibt durchaus TVs, die den Bitstream am optischen SPDIF ausgeben. Das hat dann auch nichts mit DD2.0 oder 5.1 zu tun.
Mein Panasonic gibt aber leider am optischen Ausgang auch nur PCM aus.

Steffmaster · 8. Januar 2012

Zitat von fnu

Warum das denn, hat Dein Mainboard kein S/P-DIF Ausgang? Also zumindest einen OnBoard Header haben die meisten ...

Regards
fnu

Das ist gut. Ich habe SPDIF Blende angeschlossen. Ich hatte aber nur eine coax, keine optische. Na jedenfalls Pro7 Digital geht. Am Reciver wird mir 5.1 angezeigt. Aber im Mplayer habe ich nun überhaupt keinen Ton mehr. Egal ob PCM oder AC3?! DVDSwitch nur bei AC3 nicht. Stereo geht. Was das nun wieder?

Steffmaster · 9. Januar 2012

EDIT:

So, nach entfernen der "device=hw=1.3" hinter -ao alsa in der /usr/share/vdr-plugin-mplayer/mplayer

VORHER:

Bash

#!/bin/sh
#################################################################################
#                                                                           	#
#   The following configuration file is generated automatically by the yaVDR	#
# 	system. Don't change this file as every update of yaVDR will overwrite	#
#     	the local changes. Instead put your required customizations       	#
#   	into /etc/yavdr/templates_custom/ based on the original templates   	#
#                  	under /usr/share/yavdr/templates.                    	#
#                                                                           	#
#        	http://www.yavdr.org/developer-zone/template-overview/         	#
#                                                                           	#
#                                                                           	#
#################################################################################


export DISPLAY=:1`dbget vdr.tempdisplay`
#/usr/bin/vdr-dbus-send /Remote remote.Disable


MPLAYER="/usr/bin/mplayer"
#AUDIOSET="/usr/bin/iecset audio 1"
FILE="$1"


# What is your DVD-ROM device ?
DVD="/dev/dvd"


# use dvdnav for playing DVDs
# if set to false, mplayer will use dvd://
DVDNAV="true"


# Where to find DVD/VCD dummy files? (just a fake and empty text file for the plugin)
DVDFiles="/var/lib/vdr-plugin-mplayer/DVD-VCD"


# get the file extension of the video
SUFFIX=$(echo -e "${FILE:$[${#FILE}-4]:4}" | tr [A-Z] [a-z])


if test \( "$FILE" == "$DVDFiles/DVD" -o "$FILE" == "$DVDFiles/VCD" \) -a -n "$DVDFiles" -a -n "$DVD"; then
	if test "$FILE" == "$DVDFiles/DVD"; then
  	if $DVDNAV; then
    	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa:device=hw=1.3
 -afm hwac3  -alang de,en -nocache -slave -ontop -v -noconfig all  -dvd-device $DVD dvdnav://"
  	else
    	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa:device=hw=1.3
 -afm hwac3  -alang de,en -slave -ontop -v -noconfig all  -dvd-device $DVD dvd://"
  	fi
	fi
	if test "$FILE" == "$DVDFiles/VCD"; then
    	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa:device=hw=1.3
 -afm hwac3  -alang de,en -slave  -ontop -v -noconfig all  -cdrom-device $DVD vcd://"
	fi
	unset FILE
elif test "${SUFFIX}" == ".cue"; then
	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa:device=hw=1.3
 -afm hwac3  -alang de,en -slave -ontop -v -noconfig all cue://$FILE:2"
	unset FILE
elif test \( "$SUFFIX" == ".img" -o "$SUFFIX" == ".iso" \); then
	if $DVDNAV; then
   	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa:device=hw=1.3
 -afm hwac3  -alang de,en -nocache -slave -ontop -v -noconfig all  -dvd-device $FILE dvdnav://"
	else
    	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa:device=hw=1.3
 -afm hwac3  -alang de,en -slave -ontop -v -noconfig all dvd://"
	fi
	unset FILE
elif  (( [[ "$FILE" == *VIDEO_TS* ]] || [[ "$FILE" == *video_ts* ]] || [[ "$FILE" == *VTS_* ]] || [[ "$FILE" == *vts_* ]] ) && $DVDNAV ); then
	d=$(dirname $FILE)
	logger -s -- "$d"
	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa:device=hw=1.3
 -afm hwac3  -alang de,en -nocache -slave -ontop -v -noconfig all  -dvd-device $FILE dvdnav://"
	unset d
	unset FILE
else
	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa:device=hw=1.3
 -afm hwac3 -cache 8192 -slave -ontop -v -noconfig all -idx"


fi


#$AUDIOSET
$CMDLINE "$FILE"
#/usr/bin/vdr-dbus-send /Remote remote.Enable

Alles anzeigen

NACHHER:

Bash

#!/bin/sh
#################################################################################
#                                                                           	#
#   The following configuration file is generated automatically by the yaVDR	#
# 	system. Don't change this file as every update of yaVDR will overwrite	#
#     	the local changes. Instead put your required customizations       	#
#   	into /etc/yavdr/templates_custom/ based on the original templates   	#
#                  	under /usr/share/yavdr/templates.                    	#
#                                                                           	#
#        	http://www.yavdr.org/developer-zone/template-overview/         	#
#                                                                           	#
#                                                                           	#
#################################################################################


export DISPLAY=:1`dbget vdr.tempdisplay`
#/usr/bin/vdr-dbus-send /Remote remote.Disable


MPLAYER="/usr/bin/mplayer"
#AUDIOSET="/usr/bin/iecset audio 1"
FILE="$1"


# What is your DVD-ROM device ?
DVD="/dev/dvd"


# use dvdnav for playing DVDs
# if set to false, mplayer will use dvd://
DVDNAV="true"


# Where to find DVD/VCD dummy files? (just a fake and empty text file for the plugin)
DVDFiles="/var/lib/vdr-plugin-mplayer/DVD-VCD"


# get the file extension of the video
SUFFIX=$(echo -e "${FILE:$[${#FILE}-4]:4}" | tr [A-Z] [a-z])


if test \( "$FILE" == "$DVDFiles/DVD" -o "$FILE" == "$DVDFiles/VCD" \) -a -n "$DVDFiles" -a -n "$DVD"; then
	if test "$FILE" == "$DVDFiles/DVD"; then
  	if $DVDNAV; then
    	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa
 -afm hwac3  -alang de,en -nocache -slave -ontop -v -noconfig all  -dvd-device $DVD dvdnav://"
  	else
    	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa
 -afm hwac3  -alang de,en -slave -ontop -v -noconfig all  -dvd-device $DVD dvd://"
  	fi
	fi
	if test "$FILE" == "$DVDFiles/VCD"; then
    	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa
 -afm hwac3  -alang de,en -slave  -ontop -v -noconfig all  -cdrom-device $DVD vcd://"
	fi
	unset FILE
elif test "${SUFFIX}" == ".cue"; then
	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa
 -afm hwac3  -alang de,en -slave -ontop -v -noconfig all cue://$FILE:2"
	unset FILE
elif test \( "$SUFFIX" == ".img" -o "$SUFFIX" == ".iso" \); then
	if $DVDNAV; then
   	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa
 -afm hwac3  -alang de,en -nocache -slave -ontop -v -noconfig all  -dvd-device $FILE dvdnav://"
	else
    	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa
 -afm hwac3  -alang de,en -slave -ontop -v -noconfig all dvd://"
	fi
	unset FILE
elif  (( [[ "$FILE" == *VIDEO_TS* ]] || [[ "$FILE" == *video_ts* ]] || [[ "$FILE" == *VTS_* ]] || [[ "$FILE" == *vts_* ]] ) && $DVDNAV ); then
	d=$(dirname $FILE)
	logger -s -- "$d"
	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa
 -afm hwac3  -alang de,en -nocache -slave -ontop -v -noconfig all  -dvd-device $FILE dvdnav://"
	unset d
	unset FILE
else
	CMDLINE="$MPLAYER -osdlevel 1 -vo vdpau  -vc ffh264vdpau,ffmpeg12vdpau,ffvc1vdpau,ffwmv3vdpau,ffodivx -fs  -monitoraspect 16:9 -ao alsa
 -afm hwac3 -cache 8192 -slave -ontop -v -noconfig all -idx"


fi


#$AUDIOSET
$CMDLINE "$FILE"
#/usr/bin/vdr-dbus-send /Remote remote.Enable

Alles anzeigen

habe ich jetzt im Mplayer einen 5.1 Ton. Aber PCM, egal ob avi, mpg oder xdiv bleiben stumm

Wenn ich einen Reciver mit HDMI eingägen hätte, wären dann all diese Probleme vom Tisch? Oder erwartet mich dann neues in Sachen kein Ton hier und dort?

Dolby Sound nicht über HDMI vorhanden

Jetzt mitmachen!

Teilen