Hallo zusammen - ich bin ziemlich ratlos - ich hab mich durch die Threads hier durchgewühlt, alsa geuppt, asound.conf frisiert, xine-config rumgefummelt - alles ohne ergebnis.
Zur Situation:
Board ist ein Asus M3N78-EM, angeschlossen per SPDIF optisch an einen Harman Kardon AVR3550. Kernel ist 2.6.32-rc8, alsa ist geuppt auf 1.0.22.
VDR (1.7.10) läuft mit xine-plugin und als Frontend läuft xine.
Ton (Stereo) geht sauber über spdif und den AVR3550
5.1-Quellen kommen nur als Stereo (2-Kanal) am AVR an.
Das Problem ist auch kein VDR-Problem, sondern das gleiche Verhalten habe ich auch bei Ausgabe von DVD's über xine.
Ich bin ziemlich lost - und denke, dass es ein xine-Thema sein müsste. Ich würde mich gerne von unten nach oben dem Problem nähern und zunächst mal sicherstellen, dass 5.1 auch über den optischen Kanal an den Receiver geht - speaker-test wäre eine option, wenn ich wüsste wies geht - bisher bleibt das alles ziemlich stumm damit.
Fragen :
Wie komm ich der Ursache näher ?
WOher bekomme ich ein 5.1 sample um es z.B. zunächst mit aplay oder speaker-test zu probieren ? Ist das überhaupt der richtige Ansatz ?
Ich habe hier mal ein paar Eckdaten angefügt :
lspci :
mms1:/tmp # lspci
00:00.0 RAM memory: nVidia Corporation Device 0754 (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075c (rev a2)
00:01.1 SMBus: nVidia Corporation Device 0752 (rev a1)
00:01.2 RAM memory: nVidia Corporation Device 0751 (rev a1)
00:01.3 Co-processor: nVidia Corporation Device 0753 (rev a2)
00:01.4 RAM memory: nVidia Corporation Device 0568 (rev a1)
00:02.0 USB Controller: nVidia Corporation Device 077b (rev a1)
00:02.1 USB Controller: nVidia Corporation Device 077c (rev a1)
00:04.0 USB Controller: nVidia Corporation Device 077d (rev a1)
00:04.1 USB Controller: nVidia Corporation Device 077e (rev a1)
00:06.0 IDE interface: nVidia Corporation Device 0759 (rev a1)
00:07.0 Audio device: nVidia Corporation Device 0774 (rev a1)
00:08.0 PCI bridge: nVidia Corporation Device 075a (rev a1)
00:09.0 IDE interface: nVidia Corporation Device 0ad0 (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation Device 0760 (rev a2) 00:0b.0 PCI bridge: nVidia Corporation Device 0569 (rev a1)
00:10.0 PCI bridge: nVidia Corporation Device 0778 (rev a1)
00:12.0 PCI bridge: nVidia Corporation Device 075b (rev a1)
00:13.0 PCI bridge: nVidia Corporation Device 077a (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 01:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 02:00.0 VGA compatible controller: nVidia Corporation Device 0848 (rev a2)
05:00.0 FireWire (IEEE 1394): JMicron Technologies, Inc. Device 2380 mms1:/tmp #
Display More
aplay -l :
mms1:/tmp # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: ALC1200 Digital [ALC1200 Digital]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 0/1
Subdevice #0: subdevice #0
mms1:/tmp #
Display More
aplay -L :
mms1:/tmp # aplay -L
front:CARD=NVidia,DEV=0
HDA NVidia, ALC1200 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC1200 Analog
4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC1200 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC1200 Analog
5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC1200 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC1200 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0
HDA NVidia, ALC1200 Digital
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
mms1:/tmp #
Display More
/etc/asound.conf :
pcm.!default {
type plug
slave {
pcm multi
rate 48000
}
ttable.0.0 1.0
ttable.1.1 1.0
ttable.0.2 1.0
ttable.1.3 1.0
}
#ctl.!default hdmiout
pcm.optical {
type hw
card 0
device 1
}
ctl.optical {
type hw
card 0
device 1
}
pcm.hdmiout {
type hw
card 0
device 3
}
ctl.hdmiout {
type hw
card 0
device 3
}
pcm.multi {
type multi
slaves.a.pcm "hdmiout"
slaves.a.channels 2
slaves.b.pcm "optical"
slaves.b.channels 2
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
}
ctl.multi {
type hw
card 0
}
Display More
~/.xine/config :
mms1:/tmp # grep "^[a-z]" /home/mms/.xine/config
gui.panel_visible:0
gui.panel_x:306
gui.panel_y:667
gui.dropped_frames_warning:0
gui.kbedit_x:30
gui.kbedit_y:108
gui.setup_x:83
gui.setup_y:102
gui.viewlog_x:86
gui.viewlog_y:124
audio.device.alsa_front_device:default
audio.device.alsa_mixer_name:Master
audio.output.speaker_arrangement:Stereo 2.0
audio.volume.mixer_volume:60
audio.volume.remember_volume:1
video.driver:vdpau
media.audio_cd.device:/dev/dvd
media.files.origin_path:/media
engine.buffers.video_num_buffers:900
engine.buffers.video_num_frames:22
engine.performance.memcpy_method:sse
Display More
Sobald ich audio.output.speaker_arrangement auf "Surround 5.1" stelle, bleibt es komplett stumm...