Hallo!
System Gentoo
VDR 1.4.1
Kernel 2.6.17-r*
graphlcd-0.1.2-pre6
Installation klappte und auch showpic zaubert mir etwas aufs Display.
Aber mit VDR will es nicht.
Ich starte den VDR wie folgt:
/usr/local/bin/vdr -c /etc/vdr -P'graphlcd -c /etc/graphlcd.conf -d t6963c'
Momentan laeuft der VDR als root, das wird aber noch geaender.
In folgendem Thread hoert sich das nach meinem Problem an, aber die Loesung passt nicht.
[HOWTO] Umbau 240 x 128 Grafik LCD mit T6963C in schwarzem Gehäuse für VDR
Die Fehlermeldungen mit der DVB-Karte kommen von der Testweise eingebauten Skystar2.
Meine derzeitige graphlcd.conf:
Code
# t6963c driver
# This is a driver module for the Toshiba T6963C LCD controller.
# Default size: 240 x 128
Driver=t6963c
Port=0x378
#Device=/dev/parport0
Width=240
Height=128
UpsideDown=no
Invert=no
RefreshDisplay=1
# Wiring
# Select the type of wiring your display is connected with.
# Possible values: 'Standard', 'Windows'
# Default value: 'Standard' Wiring=Standard
# FontSelect
# Select the font width your display uses for text mode. In most cases
# this is selectable through one of the pins of your LCD board
# Possible values: '6', '8'
# Default value: '6'
FontSelect=6
# AutoMode
# Enables or disables the usage of T6963C's auto mode which doubles
# writing speed when enabled.
# Possible values: 'yes', 'no'
# Default value: 'yes'
AutoMode=yes
# StatusCheck
# Enables or disables the usage of T6963C's status check. When using a
# shielded cable for connecting your display, the disabling may be
# possible. This results in doubling the speed of writing data to the
# LCD.
# Possible values: 'yes', 'no'
# Default value: 'yes'
StatusCheck=yes
Alles anzeigen
Und der Auszug aus /var/log/messages:
Code
Aug 11 23:39:36 vdr parport_pc: VIA 686A/8231 detected
Aug 11 23:39:36 vdr parport_pc: probing current configuration
Aug 11 23:39:36 vdr parport_pc: Current parallel port base: 0x378
Aug 11 23:39:36 vdr parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
Aug 11 23:39:36 vdr lp0: using parport0 (interrupt-driven).
Aug 11 23:39:36 vdr parport_pc: VIA parallel port: io=0x378, irq=7
...
Aug 12 01:15:17 vdr vdr: [15182] VDR version 1.4.1 started Aug 12 01:15:17 vdr vdr: [15182] loading plugin: ./PLUGINS/lib/libvdr-graphlcd.so.1.4.1
Aug 12 01:15:17 vdr vdr: [15182] graphlcd: WARNING: No display specified, using first one (t6963c).
Aug 12 01:15:17 vdr vdr: [15182] loading /etc/vdr/setup.conf
Aug 12 01:15:17 vdr vdr: [15182] loading /etc/vdr/sources.conf
Aug 12 01:15:17 vdr vdr: [15182] loading /etc/vdr/diseqc.conf
Aug 12 01:15:17 vdr vdr: [15182] loading /etc/vdr/channels.conf
Aug 12 01:15:17 vdr vdr: [15182] loading /etc/vdr/timers.conf
Aug 12 01:15:17 vdr vdr: [15182] loading /etc/vdr/svdrphosts.conf Aug 12 01:15:17 vdr vdr: [15182] loading /etc/vdr/remote.conf
Aug 12 01:15:17 vdr vdr: [15182] loading /etc/vdr/keymacros.conf Aug 12 01:15:17 vdr vdr: [15182] reading EPG data from /video/epg.data
Aug 12 01:15:17 vdr vdr: [15184] video directory scanner thread started (pid=15184, tid=15184)
Aug 12 01:15:17 vdr vdr: [15184] video directory scanner thread ended (pid=15184, tid=15184)
Aug 12 01:15:17 vdr vdr: [15185] video directory scanner thread started (pid=15185, tid=15185)
Aug 12 01:15:17 vdr vdr: [15185] video directory scanner thread ended (pid=15185, tid=15185)
Aug 12 01:15:18 vdr vdr: [15182] probing /dev/dvb/adapter0/frontend0
Aug 12 01:15:21 vdr vdr: [15182] ERROR (dvbdevice.c,110): Remote I/O error
Aug 12 01:15:21 vdr vdr: [15182] probing /dev/dvb/adapter1/frontend0
Aug 12 01:15:21 vdr vdr: [15182] found 1 video device
Aug 12 01:15:21 vdr vdr: [15182] initializing plugin: graphlcd (0.1.2-pre6): Output to graphic LCD
Aug 12 01:15:21 vdr vdr: [15182] setting primary device to 1
Aug 12 01:15:21 vdr vdr: [15187] tuner on device 1 thread started (pid=15187, tid=15187) Aug 12 01:15:21 vdr vdr: [15188] section handler thread started (pid=15188, tid=15188)
Aug 12 01:15:21 vdr vdr: t6963c: Testing ECP mode...
Aug 12 01:15:21 vdr vdr: t6963c: working!
Aug 12 01:15:21 vdr vdr: t6963c: T6963 initialized.
Aug 12 01:15:21 vdr vdr: [15189] graphlcd plugin: ERROR: No "Large Font" specified!
Aug 12 01:15:21 vdr vdr: [15182] SVDRP listening on port 2001
Aug 12 01:15:21 vdr vdr: [15182] setting current skin to "classic"
Aug 12 01:15:21 vdr vdr: [15182] loading /etc/vdr/themes/classic-default.theme
Aug 12 01:15:21 vdr vdr: [15182] starting plugin: graphlcd
Aug 12 01:15:21 vdr vdr: [15182] graphlcd: waiting for display thread to get ready
Aug 12 01:15:27 vdr vdr: [15182] graphlcd: timeout while waiting for display thread
Aug 12 01:15:27 vdr vdr: [15187] tuner on device 1 thread ended (pid=15187, tid=15187)
Aug 12 01:15:27 vdr vdr: [15188] section handler thread ended (pid=15188, tid=15188)
Aug 12 01:15:27 vdr vdr: [15182] deleting plugin: graphlcd
Aug 12 01:15:28 vdr vdr: [15182] exiting
Alles anzeigen
Fuer einen Hinweis waehre ich dankbar.