Hallo ich habe Probleme mit der Fernbedienung .. Ich habe versucht alles mit zuschreiben was ich so gemacht und getestet habe .. evtl hat jemand noch einen tipp
So bin ich jetzt Vorgeganen:
###sdcard vorbereiten
# parted /dev/sdc mklabel msdos
Warnung: Die bestehende Partitionstabelle und alle Daten auf /dev/sdc werden
gelöscht. Wollen Sie fortfahren?
Ja/Yes/Nein/No? Ja
Informationen: Möglicherweise müssen Sie /etc/fstab anpassen.
# parted /dev/sdc 'mkpart primary fat32 1MiB -1MiB'
Informationen: Möglicherweise müssen Sie /etc/fstab anpassen.
# mkfs.vfat -F 32 /dev/sdc1
mkfs.fat 3.0.27 (2014-11-12)
cp -r ~/Downloads/MLD /media/SDCARD
###installieren
gebooted
webui http://mld
install
client-rpi
auf sdcard (Textbox scrollt nicht nach unten, habe etwas länger gebraucht bis ich das erkannt habe das er schon längst fertig war)
reboot (am fernseher läd er sachen und packt diese aus. keine fehler zu erkennen. keine maus oder tastatur angeschlossen)
###konfigurieren
nach neustart kein bild. info leuchtet kurz auf.
cec remote scheint zu funktionieren. ok knopf kommt info screen
webui http://mld
konfiguration
tv -> kanaliste -> datei vom server hochladen
speichern
restart vdr (bild und ton von ard hd ist da)
erster test lirc
MLD> mode2
mode2: could not get file information for /dev/lirc0
mode2: default_init(): No such file or directory
MLD> irrecord kls.conf
irrecord - application for recording IR-codes for usage with lirc
Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)
irrecord: could not get file information for /dev/lirc0
irrecord: default_init(): No such file or directory
irrecord: could not init hardware (lircd running ? --> close it, check permissions)
MLD> irw
(keine ausgaben .. woher auch kenne meine key ja noch nicht.. also weiter)
wieder konfiguration webui
remote control
lirc treiber rpi on gpio
speichern
testen ...
MLD> mode2
space 262
pulse 172
space 1418
pulse 82
space 1533
pulse 136
space 7586
pulse 130
space 1275
pulse 83
space 1321
pulse 155
space 1270
pulse 189
space 1305
pulse 210
space 1389
pulse 83
space 9261
pulse 237
space 1160
pulse 138
space 1289
pulse 132
space 1275
pulse 194
space 1352
pulse 241
space 10645
pulse 103
space 1303
pulse 81
space 1319
pulse 127
space 1301
pulse 188
space 1306
pulse 183
space 10755
pulse 132
space 1270
pulse 83
space 1340
Alles anzeigen
was ist denn da los .. der fernseher sendet dauert irgend was und ich weiss nicht wieso ... libCEC schuld? simpleLink und der gleichend deaktiviert .. kein unterschied .. fernseher ausgeschaltet .. mode2 macht keine ausgabe .. wieder eingeschaltet und los rast die ausgabe wieder wie im flug ... ir empfanger vom vdr mit hand zu gehalten.. auch ruhe im karton ... wer sendet hier ir ohne das ich es will .... ich glaube es ist das suchen nach einer 3D Brille obwohl 3d aus ist .. gegooglet: ne der plasma imitiert unglüglicherweise ir signale da machen farben dem ir licht nahe sind .. wenn ich den tv zustelle zb dicke pappe dann sind die störungen weg .. evtl war auch das nur mein problem .. mache ohne tv erstmal weiter ...
lirc conf aus mld mit yausbir kopiert und über webui hochgeladen
speichern
lirc neustarten
MLD> mode2
mode2: could not open /dev/lirc0
mode2: default_init(): Device or resource busy
MLD> irw /var/run/lirc/lircd-GPIO
MLD> irw /var/run/lirc/lircd
MLD> irw
Keine ausgaben bei tastendruck
auch nach dem reboot keine besserung
MLD> irw /var/run/lirc/lircd-GPIO
^C
MLD> irw /var/run/lirc/lircd
^C
MLD> irw
^C
MLD> cat /etc/lircd.conf
begin remote
name harmony_kls_vdr_1.6
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 922 858
zero 922 858
plead 937
gap 116048
min_repeat 2
toggle_bit 2
begin codes
KEY_MUTE 0x12cd
KEY_VOLUME+ 0x12d0
KEY_VOLUME- 0x12d1
KEY_CHANNEL- 0x12e1 KEY_CHANNEL- 0x12e1
KEY_CHANNEL+ 0x12e0 KEY_CHANNEL+ 0x12e0
KEY_PREVCHANNEL 0x12e2 KEY_PREVCHANNEL 0x12e2
KEY_UP 0x02c4
KEY_DOWN 0x02c5
KEY_LEFT 0x02c6
KEY_RIGHT 0x02c7
KEY_OK 0x02c8
KEY_MENU 0x02c9
KEY_BACK 0x02ca
KEY_SCHEDULE 0x02cb
KEY_INFO 0x02cc
KEY_STOP 0x12f6
KEY_PREV 0x12f0
KEY_NEXT 0x12f1
KEY_PLAY 0x12f5
KEY_RECORD 0x12f7
KEY_FASTREW 0x12f2
KEY_FASTFWD 0x12f4
KEY_PAUSE 0x12f3
KEY_1 0x12c1
KEY_2 0x12c2
KEY_3 0x12c3
KEY_4 0x12c4
KEY_5 0x12c5
KEY_6 0x12c6
KEY_7 0x12c7
KEY_8 0x12c8
KEY_9 0x12c9
KEY_0 0x12c0
KEY_RED 0x02c0
KEY_GREEN 0x02c1
KEY_YELLOW 0x02c2
KEY_BLUE 0x02c3
KEY_CHANNELS 0x02d3 KEY_CHANNELS 0x02d3
KEY_COMMANDS 0x02cd KEY_COMMANDS 0x02cd
KEY_RECORDINGS 0x02ce KEY_RECORDINGS 0x02ce
KEY_TIMERS 0x02cf
KEY_SETUP 0x02d0
KEY_USER1 0x02f0
KEY_USER2 0x02f1
KEY_USER3 0x02f2
KEY_USER4 0x02f3
KEY_USER5 0x02f4
KEY_USER6 0x02f5
KEY_USER7 0x02f6
KEY_USER8 0x02f7
KEY_USER9 0x02f8
KEY_POWER2 0x12cb KEY_POWER2 0x12cb
KEY_AUDIO 0x02d1
KEY_SUBTITLES 0x02d2 KEY_SUBTITLES 0x02d2
end codes
end remote
Alles anzeigen
hmmmm ein killall lircd und anschliessend mode2 gibt ausgaben bei tastedruck ... fazit .. hardware geht .. richtiger pin .... kernel modul geladen ...
also lircd manuell gestertet .. und was passiert
MLD> lircd
lircd: error in configfile line 20:
lircd: "KEY_CHANNEL-": must be a valid (__u64) number
lircd: reading of file '/etc/lircd.conf' failed
lircd: reading of config file failed
Config etwas gesäubert
(merkwürdig das die fehler nur am mld auf rpi auftreten und nicht auf atom basis ...)
MLD> lircd
MLD> irw
00000000000002c8 00 KEY_OK harmony_kls_vdr_1.6
00000000000002c8 01 KEY_OK harmony_kls_vdr_1.6
00000000000002c8 02 KEY_OK harmony_kls_vdr_1.6
00000000000002c5 00 KEY_DOWN harmony_kls_vdr_1.6
00000000000002c5 01 KEY_DOWN harmony_kls_vdr_1.6
00000000000002c5 02 KEY_DOWN harmony_kls_vdr_1.6
reboot und geht .. aber nur kurz ...
dann irw gestartet und was ist das?
es ist nur einmal kurz gedrückt worden. wie oben auch ..
MLD> irw
160 0 KEY_OK devinput
160 1 KEY_OK devinput
160 2 KEY_OK devinput
160 3 KEY_OK devinput
160 4 KEY_OK devinput
160 5 KEY_OK devinput
160 6 KEY_OK devinput
160 7 KEY_OK devinput
160 8 KEY_OK devinput
ein ps sagt das lirc so läuft
1126 root 5884 S lircd -P /var/run/lirc.pid --output=/var/run/lirc/lircd-GPIO --uinput
MLD> killall lircd
MLD> lircd -P /var/run/lirc.pid --output=/var/run/lirc/lircd-GPIO
MLD> irw /var/run/lirc/lircd-GPIO
00000000000002c8 00 KEY_OK harmony_kls_vdr_1.6
00000000000002c8 01 KEY_OK harmony_kls_vdr_1.6
00000000000002c8 02 KEY_OK harmony_kls_vdr_1.6
aber es klapt nur kurz .. dann kommt nichts mehr ... dmesg sagt das hier .. ob das zeitlich passt weiss ihc noch nicht
[ 30.771722] lirc_dev: IR Remote Control driver registered, major 247
[ 30.782982] lirc_dev: lirc_register_driver: sample_rate: 0
[ 30.783676] lirc_rpi: driver registered!
[ 31.737399] lirc_rpi: auto-detected active low receiver on GPIO pin 18
[ 32.103615] input: lircd as /devices/virtual/input/input0
[ 133.972269] ------------[ cut here ]------------
[ 133.972354] WARNING: CPU: 0 PID: 0 at net/core/skbuff.c:4104 skb_try_coalesce+0x364/0x3c0()
[ 133.972380] Modules linked in: lirc_rpi(O) lirc_dev(O) snd_soc_bcm2708_i2s regmap_mmio snd_soc_core snd_compress snd_pcm_dmaengine uinput snd_bcm2835 snd_pcm snd_timer snd
[ 133.972486] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 3.19.3.177 #1
[ 133.972497] Hardware name: BCM2709
[ 133.972550] [<80017358>] (unwind_backtrace) from [<80012f6c>] (show_stack+0x20/0x24)
[ 133.972582] [<80012f6c>] (show_stack) from [<806e11f4>] (dump_stack+0x9c/0xdc)
[ 133.972614] [<806e11f4>] (dump_stack) from [<80026058>] (warn_slowpath_common+0x98/0xc8)
[ 133.972641] [<80026058>] (warn_slowpath_common) from [<80026144>] (warn_slowpath_null+0x2c/0x34)
[ 133.972663] [<80026144>] (warn_slowpath_null) from [<805fb154>] (skb_try_coalesce+0x364/0x3c0)
[ 133.972695] [<805fb154>] (skb_try_coalesce) from [<806563d8>] (tcp_try_coalesce.part.40+0x38/0xbc)
[ 133.972742] [<806563d8>] (tcp_try_coalesce.part.40) from [<80657c1c>] (tcp_data_queue+0x7a4/0xc94)
[ 133.972783] [<80657c1c>] (tcp_data_queue) from [<806599e8>] (tcp_rcv_established+0x148/0x628)
[ 133.972823] [<806599e8>] (tcp_rcv_established) from [<80661e88>] (tcp_v4_do_rcv+0x154/0x390)
[ 133.972865] [<80661e88>] (tcp_v4_do_rcv) from [<8066495c>] (tcp_v4_rcv+0x8a8/0x8b0)
[ 133.972902] [<8066495c>] (tcp_v4_rcv) from [<8063fe18>] (ip_local_deliver_finish+0xf0/0x2d8)
[ 133.972930] [<8063fe18>] (ip_local_deliver_finish) from [<80640564>] (ip_local_deliver+0x48/0xa8)
[ 133.972956] [<80640564>] (ip_local_deliver) from [<80640164>] (ip_rcv_finish+0x164/0x3ec)
[ 133.972981] [<80640164>] (ip_rcv_finish) from [<80640934>] (ip_rcv+0x370/0x498)
[ 133.973008] [<80640934>] (ip_rcv) from [<80605e3c>] (__netif_receive_skb_core+0x68c/0x8a0)
[ 133.973039] [<80605e3c>] (__netif_receive_skb_core) from [<806087c8>] (__netif_receive_skb+0x20/0x7c)
[ 133.973066] [<806087c8>] (__netif_receive_skb) from [<8060a238>] (process_backlog+0xb0/0x150)
[ 133.973089] [<8060a238>] (process_backlog) from [<8060a014>] (net_rx_action+0x284/0x3f8)
[ 133.973155] [<8060a014>] (net_rx_action) from [<8002a190>] (__do_softirq+0x19c/0x3f0)
[ 133.973183] [<8002a190>] (__do_softirq) from [<8002a7ec>] (irq_exit+0xdc/0x140)
[ 133.973212] [<8002a7ec>] (irq_exit) from [<8006d7fc>] (__handle_domain_irq+0x98/0xec)
[ 133.973262] [<8006d7fc>] (__handle_domain_irq) from [<8000855c>] (asm_do_IRQ+0x2c/0x30)
[ 133.973287] [<8000855c>] (asm_do_IRQ) from [<806e68b4>] (__irq_svc+0x34/0x14c)
[ 133.973303] Exception stack(0x809fff08 to 0x809fff50)
[ 133.973324] ff00: ffffffed 00000000 ffffffed 00000000 809fe000 80a22cb4
[ 133.973345] ff20: 80a22d18 80a69f9c 00000000 00000000 00000000 809fff5c 80a23c18 809fff50
[ 133.973361] ff40: 8000fb28 8000fb2c 60000013 ffffffff
[ 133.973391] [<806e68b4>] (__irq_svc) from [<8000fb2c>] (arch_cpu_idle+0x34/0x4c)
[ 133.973422] [<8000fb2c>] (arch_cpu_idle) from [<8005f9ec>] (cpu_startup_entry+0x2a0/0x39c)
[ 133.973450] [<8005f9ec>] (cpu_startup_entry) from [<806ddc08>] (rest_init+0x94/0x98)
[ 133.973481] [<806ddc08>] (rest_init) from [<8098bd34>] (start_kernel+0x3e8/0x3f4)
[ 133.973499] ---[ end trace 7663ab37915bf4f0 ]---
Alles anzeigen
nach einem reboot geht lirc gar nicht mehr .. hmmmm ... hier hänge ich jetzt seit 2 Stunden
MLD> dmesg
[ 0.000000] Booting Linux on physical CPU 0xf00
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3.177 (devel@nightbuild-rpi) (gcc version 4.9.2 (Raspbian 4.9.2-10) ) #1 SMP PREEMPT Fri Jun 19 01:24:18 CEST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: BCM2709
[ 0.000000] cma: Reserved 8 MiB at 0x2e800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 192512
[ 0.000000] free_area_init_node: node 0, pgdat 80a65dc0, node_mem_map ae156000
[ 0.000000] Normal zone: 1692 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 192512 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (8640->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 11 pages/cpu @ae125000 s13184 r8192 d23680 u45056
[ 0.000000] pcpu-alloc: s13184 r8192 d23680 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa01041 bcm2709.serial=0x1a7f2e2a smsc95xx.macaddr=B8:27:EB:7F:2E:2A bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 root=/dev/mmcblk0p2 rootwait splash=silent quiet nodialog smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 742592K/770048K available (7610K kernel code, 468K rwdata, 2128K rodata, 460K init, 782K bss, 19264K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xaf800000 - 0xff000000 (1272 MB)
[ 0.000000] lowmem : 0x80000000 - 0xaf000000 ( 752 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x8098aab4 (9739 kB)
[ 0.000000] .init : 0x8098b000 - 0x809fe000 ( 460 kB)
[ 0.000000] .data : 0x809fe000 - 0x80a733dc ( 469 kB)
[ 0.000000] .bss : 0x80a733dc - 0x80b36c14 ( 783 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:608
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt).
[ 0.000015] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[ 0.000038] Switching to timer-based delay loop, resolution 52ns
[ 0.000328] Console: colour dummy device 80x30
[ 0.000554] console [tty0] enabled
[ 0.000582] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000610] pid_max: default: 32768 minimum: 301
[ 0.001026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.001048] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002365] Initializing cgroup subsys memory
[ 0.002416] Initializing cgroup subsys devices
[ 0.002443] Initializing cgroup subsys freezer
[ 0.002483] Initializing cgroup subsys net_cls
[ 0.002508] Initializing cgroup subsys blkio
[ 0.002595] CPU: Testing write buffer coherency: ok
[ 0.002678] ftrace: allocating 23970 entries in 71 pages
[ 0.061484] missing device node for CPU 0
[ 0.061550] missing device node for CPU 1
[ 0.061576] missing device node for CPU 2
[ 0.061601] missing device node for CPU 3
[ 0.061634] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
[ 0.061652] [bcm2709_smp_prepare_cpus] enter
[ 0.061803] Setting up static identity map for 0x6e8c40 - 0x6e8c98
[ 0.121481] [bcm2709_boot_secondary] cpu:1 started (0) 17
[ 0.121789] [bcm2709_secondary_init] enter cpu:1
[ 0.121850] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
[ 0.141448] [bcm2709_boot_secondary] cpu:2 started (0) 18
[ 0.141705] [bcm2709_secondary_init] enter cpu:2
[ 0.141739] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
[ 0.161512] [bcm2709_boot_secondary] cpu:3 started (0) 18
[ 0.161756] [bcm2709_secondary_init] enter cpu:3
[ 0.161790] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
[ 0.161888] Brought up 4 CPUs
[ 0.161915] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.161926] CPU: All CPU(s) started in SVC mode.
[ 0.162970] devtmpfs: initialized
[ 0.182496] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.183860] xor: measuring software checksum speed
[ 0.281269] arm4regs : 829.200 MB/sec
[ 0.381369] 8regs : 526.800 MB/sec
[ 0.481466] 32regs : 511.200 MB/sec
[ 0.581562] neon : 764.000 MB/sec
[ 0.581577] xor: using function: arm4regs (829.200 MB/sec)
[ 0.581621] pinctrl core: initialized pinctrl subsystem
[ 0.582379] NET: Registered protocol family 16
[ 0.588022] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.611670] cpuidle: using governor ladder
[ 0.641701] cpuidle: using governor menu
[ 0.642105] bcm2709.uart_clock = 3000000
[ 0.642149] of_platform_populate failed: -22
[ 0.645835] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.645853] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.645889] mailbox: Broadcom VideoCore Mailbox driver
[ 0.646014] bcm2708_vcio: mailbox at f300b880
[ 0.646423] bcm_power: Broadcom power driver
[ 0.646441] bcm_power_open() -> 0
[ 0.646452] bcm_power_request(0, 8)
[ 1.147122] bcm_mailbox_read -> 00000080, 0
[ 1.147136] bcm_power_request -> 0
[ 1.147272] Serial: AMBA PL011 UART driver
[ 1.147415] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
[ 1.382855] raid6: int32x1 91 MB/s
[ 1.552701] raid6: int32x2 110 MB/s
[ 1.723266] raid6: int32x4 107 MB/s
[ 1.893562] raid6: int32x8 108 MB/s
[ 2.063422] raid6: neonx1 294 MB/s
[ 2.233479] raid6: neonx2 394 MB/s
[ 2.403772] raid6: neonx4 475 MB/s
[ 2.573921] raid6: neonx8 404 MB/s
[ 2.573934] raid6: using algorithm neonx4 (475 MB/s)
[ 2.573945] raid6: using intx1 recovery algorithm
[ 2.574553] SCSI subsystem initialized
[ 2.574793] usbcore: registered new interface driver usbfs
[ 2.574899] usbcore: registered new interface driver hub
[ 2.575054] usbcore: registered new device driver usb
[ 2.577089] Switched to clocksource arch_sys_counter
[ 2.627821] FS-Cache: Loaded
[ 2.628206] CacheFiles: Loaded
[ 2.643742] NET: Registered protocol family 2
[ 2.645175] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 2.645321] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.645515] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.645636] TCP: reno registered
[ 2.645659] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.645724] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.646081] NET: Registered protocol family 1
[ 2.646612] RPC: Registered named UNIX socket transport module.
[ 2.646630] RPC: Registered udp transport module.
[ 2.646641] RPC: Registered tcp transport module.
[ 2.646653] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.647757] bcm2708_dma: DMA manager at f3007000
[ 2.647903] bcm2708_gpio: bcm2708_gpio_probe 80a293d8
[ 2.648654] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 2.650634] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.650857] audit: initializing netlink subsys (disabled)
[ 2.650923] audit: type=2000 audit(2.619:1): initialized
[ 2.671503] FS-Cache: Netfs 'nfs' registered for caching
[ 2.672520] NFS: Registering the id_resolver key type
[ 2.672593] Key type id_resolver registered
[ 2.672606] Key type id_legacy registered
[ 2.673900] SGI XFS with security attributes, no debug enabled
[ 2.679993] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.680262] io scheduler noop registered
[ 2.680288] io scheduler deadline registered
[ 2.680362] io scheduler cfq registered (default)
[ 2.682059] BCM2708FB: allocated DMA memory eec00000
[ 2.682108] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 2.713013] Console: switching to colour frame buffer device 240x61
[ 2.733293] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[ 2.733693] uart-pl011 dev:f1: no DMA platform data
[ 2.734276] vc-cma: Videocore CMA driver
[ 2.734292] vc-cma: vc_cma_base = 0x00000000
[ 2.734304] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 2.734315] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 2.747903] brd: module loaded
[ 2.754769] loop: module loaded
[ 2.755159] vchiq: vchiq_init_state: slot_zero = 0xae800000, is_master = 0
[ 2.756028] Loading iSCSI transport class v2.0-870.
[ 2.756954] usbcore: registered new interface driver smsc95xx
[ 2.757031] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.957465] Core Release: 2.80a
[ 2.957486] Setting default values for core params
[ 2.957534] Finished setting default values for core params
[ 3.157957] Using Buffer DMA mode
[ 3.157976] Periodic Transfer Interrupt Enhancement - disabled
[ 3.157987] Multiprocessor Interrupt Enhancement - disabled
[ 3.157999] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 3.158017] Dedicated Tx FIFOs mode
[ 3.158461] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xaec14000 dma = 0xeec14000 len=9024
[ 3.158502] FIQ FSM acceleration enabled for :
[ 3.158502] Non-periodic Split Transactions
[ 3.158502] Periodic Split Transactions
[ 3.158502] High-Speed Isochronous Endpoints
[ 3.158528] dwc_otg: Microframe scheduler enabled
[ 3.158599] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80579250
[ 3.158619] WARN::hcd_init_fiq:413: FIQ ASM at 0x805795c0 length 36
[ 3.158640] WARN::hcd_init_fiq:438: MPHI regs_base at 0xaf80a000
[ 3.158669] dwc_otg bcm2708_usb: DWC OTG Controller
[ 3.158734] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 3.158788] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 3.158843] Init: Port Power? op_state=1
[ 3.158855] Init: Power Port (0)
[ 3.159175] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.159195] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.159212] usb usb1: Product: DWC OTG Controller
[ 3.159229] usb usb1: Manufacturer: Linux 3.19.3.177 dwc_otg_hcd
[ 3.159245] usb usb1: SerialNumber: bcm2708_usb
[ 3.160250] hub 1-0:1.0: USB hub found
[ 3.160317] hub 1-0:1.0: 1 port detected
[ 3.161054] dwc_otg: FIQ enabled
[ 3.161070] dwc_otg: NAK holdoff enabled
[ 3.161081] dwc_otg: FIQ split-transaction FSM enabled
[ 3.161125] Module dwc_common_port init
[ 3.161551] usbcore: registered new interface driver usb-storage
[ 3.161872] mousedev: PS/2 mouse device common for all mice
[ 3.162475] usbcore: registered new interface driver usbtouchscreen
[ 3.163123] bcm2835-cpufreq: min=600000 max=900000
[ 3.175924] Driver 'mmcblk' needs updating - please use bus_type methods
[ 3.175985] sdhci: Secure Digital Host Controller Interface driver
[ 3.175992] sdhci: Copyright(c) Pierre Ossman
[ 3.176152] mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0
[ 3.176165] mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated
[ 3.207336] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.209741] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.209852] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.212191] usbcore: registered new interface driver usbhid
[ 3.212201] usbhid: USB HID core driver
[ 3.214567] TCP: cubic registered
[ 3.214584] Initializing XFRM netlink socket
[ 3.214617] NET: Registered protocol family 17
[ 3.214814] Key type dns_resolver registered
[ 3.215195] Registering SWP/SWPB emulation handler
[ 3.221216] registered taskstats version 1
[ 3.227372] Btrfs loaded
[ 3.227536] vc-sm: Videocore shared memory driver
[ 3.227551] [vc_sm_connected_init]: start
[ 3.228087] [vc_sm_connected_init]: end - returning 0
[ 3.228889] Waiting for root device /dev/mmcblk0p2...
[ 3.245506] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.248491] mmc0: new high speed SDHC card at address aaaa
[ 3.248989] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 3.250298] mmcblk0: p1 p2
[ 3.342697] BTRFS: device fsid 14b32d65-cfcf-4a0d-a1e0-30882275d247 devid 1 transid 93 /dev/root
[ 3.344474] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 3.357331] Indeed it is in host mode hprt0 = 00021501
[ 3.372199] BTRFS: detected SSD devices, enabling SSD mode
[ 3.379226] VFS: Mounted root (btrfs filesystem) on device 0:14.
[ 3.380028] Freeing unused kernel memory: 460K (8098b000 - 809fe000)
[ 3.537269] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.537465] Indeed it is in host mode hprt0 = 00001101
[ 3.737591] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.737624] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.738865] hub 1-1:1.0: USB hub found
[ 3.738993] hub 1-1:1.0: 5 ports detected
[ 4.017211] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 4.117436] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 4.117459] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.120568] smsc95xx v1.0.4
[ 4.181000] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:7f:2e:2a
[ 4.752673] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 8.010004] systemd-udevd[334]: starting version 215
[ 8.039684] random: udevd urandom read with 74 bits of entropy available
[ 8.480066] XFS (mmcblk0p1): unknown mount option [nls].
[ 9.399492] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 10.955807] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 15.162266] random: nonblocking pool is initialized
[ 28.784622] lirc_dev: IR Remote Control driver registered, major 247
[ 28.802255] lirc_dev: lirc_register_driver: sample_rate: 0
[ 28.804820] lirc_rpi: driver registered!
[ 29.757175] lirc_rpi: auto-detected active low receiver on GPIO pin 18
[ 30.081901] input: lircd as /devices/virtual/input/input0
[ 39.825169] ------------[ cut here ]------------
[ 39.825248] WARNING: CPU: 0 PID: 3 at net/core/skbuff.c:4104 skb_try_coalesce+0x364/0x3c0()
[ 39.825264] Modules linked in: lirc_rpi(O) lirc_dev(O) snd_soc_bcm2708_i2s regmap_mmio snd_soc_core snd_compress snd_pcm_dmaengine uinput snd_bcm2835 snd_pcm snd_timer snd
[ 39.825367] CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G O 3.19.3.177 #1
[ 39.825379] Hardware name: BCM2709
[ 39.825436] [<80017358>] (unwind_backtrace) from [<80012f6c>] (show_stack+0x20/0x24)
[ 39.825471] [<80012f6c>] (show_stack) from [<806e11f4>] (dump_stack+0x9c/0xdc)
[ 39.825505] [<806e11f4>] (dump_stack) from [<80026058>] (warn_slowpath_common+0x98/0xc8)
[ 39.825533] [<80026058>] (warn_slowpath_common) from [<80026144>] (warn_slowpath_null+0x2c/0x34)
[ 39.825555] [<80026144>] (warn_slowpath_null) from [<805fb154>] (skb_try_coalesce+0x364/0x3c0)
[ 39.825614] [<805fb154>] (skb_try_coalesce) from [<806563d8>] (tcp_try_coalesce.part.40+0x38/0xbc)
[ 39.825642] [<806563d8>] (tcp_try_coalesce.part.40) from [<80657c1c>] (tcp_data_queue+0x7a4/0xc94)
[ 39.825669] [<80657c1c>] (tcp_data_queue) from [<806599e8>] (tcp_rcv_established+0x148/0x628)
[ 39.825713] [<806599e8>] (tcp_rcv_established) from [<80661e88>] (tcp_v4_do_rcv+0x154/0x390)
[ 39.825740] [<80661e88>] (tcp_v4_do_rcv) from [<8066495c>] (tcp_v4_rcv+0x8a8/0x8b0)
[ 39.825776] [<8066495c>] (tcp_v4_rcv) from [<8063fe18>] (ip_local_deliver_finish+0xf0/0x2d8)
[ 39.825805] [<8063fe18>] (ip_local_deliver_finish) from [<80640564>] (ip_local_deliver+0x48/0xa8)
[ 39.825832] [<80640564>] (ip_local_deliver) from [<80640164>] (ip_rcv_finish+0x164/0x3ec)
[ 39.825859] [<80640164>] (ip_rcv_finish) from [<80640934>] (ip_rcv+0x370/0x498)
[ 39.825887] [<80640934>] (ip_rcv) from [<80605e3c>] (__netif_receive_skb_core+0x68c/0x8a0)
[ 39.825920] [<80605e3c>] (__netif_receive_skb_core) from [<806087c8>] (__netif_receive_skb+0x20/0x7c)
[ 39.825946] [<806087c8>] (__netif_receive_skb) from [<8060a238>] (process_backlog+0xb0/0x150)
[ 39.825971] [<8060a238>] (process_backlog) from [<8060a014>] (net_rx_action+0x284/0x3f8)
[ 39.825995] [<8060a014>] (net_rx_action) from [<8002a190>] (__do_softirq+0x19c/0x3f0)
[ 39.826022] [<8002a190>] (__do_softirq) from [<8002a428>] (run_ksoftirqd+0x44/0xac)
[ 39.826048] [<8002a428>] (run_ksoftirqd) from [<8004668c>] (smpboot_thread_fn+0x15c/0x270)
[ 39.826074] [<8004668c>] (smpboot_thread_fn) from [<80042640>] (kthread+0xec/0x104)
[ 39.826100] [<80042640>] (kthread) from [<8000ef50>] (ret_from_fork+0x14/0x24)
[ 39.826117] ---[ end trace fbe0ec11120f033b ]---
Alles anzeigen