Hallo,
durch einen netten Anwenderfehler musste ich letztlich meinen VDR neu aufsetzen. Das heißt, ich musste mein System neu installieren. Als Grundlage dient Debian Lenny.
Inzwischen ist der Kernel 2.6.32-5-686 installiert, der VDR ist in Version 1.6.0-2vorhanden, die sources sind mittels des Eintrags "APT::Default-Release lenny;" auf lenny und das e-tobi Repo auf sid gestellt. Als Karte kommt eine Medion DVB-T mit einem SAA7134 Chipsatz zum Einsatz.
Als ich das System vor Jahren zum Ersten Mal installierte, hatte ich ähnliche Probleme, welche - wohl eher zufällig - irgendwann gelöst waren. Einige Module, wie z. B. saa7134, saa7134-dvb ..., werden beim Start automatisch geladen, das saa7134-alsa Modul lade ich über die /etc/modules.
Leider schaffe ich es einfach nicht, dass der VDR auch wirklich startet.
Sobald ich den vDR über das Init-Skript /etc/init.d/vdr starte, spielt sich im Syslog folgendes ab:
May 7 14:31:50 plexus vdr: [2150] cTimeMs: using monotonic clock (resolution is 1 ns)
May 7 14:31:50 plexus vdr: [2150] VDR version 1.6.0-2 started
May 7 14:31:50 plexus vdr: [2150] switched to user 'vdr'
May 7 14:31:50 plexus vdr: [2150] codeset is 'ISO-8859-1' - known
May 7 14:31:50 plexus vdr: [2150] found 23 locales in /usr/share/locale
May 7 14:31:50 plexus vdr: [2150] loading plugin: /usr/lib/vdr/plugins/libvdr-vcd.so.1.6.0
May 7 14:31:50 plexus vdr: [2150] loading plugin: /usr/lib/vdr/plugins/libvdr-control.so.1.6.0
May 7 14:31:50 plexus vdr: [2150] loading plugin: /usr/lib/vdr/plugins/libvdr-vdrcd.so.1.6.0
May 7 14:31:50 plexus vdr: [2150] loading plugin: /usr/lib/vdr/plugins/libvdr-softdevice.so.1.6.0
May 7 14:31:50 plexus vdr: [2150] loading plugin: /usr/lib/vdr/plugins/libvdr-dvd.so.1.6.0
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/setup.conf
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/sources.conf
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/diseqc.conf
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/channels.conf
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/commands.conf
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/reccmds.conf
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/svdrphosts.conf
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/remote.conf
May 7 14:31:50 plexus vdr: [2150] loading /var/lib/vdr/keymacros.conf
May 7 14:31:50 plexus vdr: [2151] video directory scanner thread started (pid=2150, tid=2151)
May 7 14:31:50 plexus vdr: [2151] video directory scanner thread ended (pid=2150, tid=2151)
May 7 14:31:50 plexus vdr: [2150] reading EPG data from /var/cache/vdr/epg.data
May 7 14:31:50 plexus vdr: [2150] probing /dev/dvb/adapter0/frontend0
May 7 14:31:50 plexus vdr: [2152] video directory scanner thread started (pid=2150, tid=2152)
May 7 14:31:50 plexus vdr: [2152] video directory scanner thread ended (pid=2150, tid=2152)
May 7 14:31:50 plexus kernel: [ 652.340012] tda1004x: setting up plls for 53MHz sampling clock
May 7 14:31:52 plexus kernel: [ 654.288015] tda1004x: found firmware revision 29 -- ok
May 7 14:31:53 plexus vdr: [2154] tuner on device 1 thread started (pid=2150, tid=2154)
May 7 14:31:53 plexus vdr: [2150] found 1 video device
May 7 14:31:53 plexus vdr: [2150] initializing plugin: vcd (0.9): VideoCD Player
May 7 14:31:53 plexus vdr: [2150] initializing plugin: control (0.0.2a): Control VDR over terminal or telnet
May 7 14:31:53 plexus vdr: [2150] initializing plugin: vdrcd (0.0.10.1): Plays identified Media Discs (for autofs)
May 7 14:31:53 plexus vdr: [2155] section handler thread started (pid=2150, tid=2155)
May 7 14:31:53 plexus vdr: [2150] initializing plugin: softdevice (0.5.0): Software-Ausgabegerät
May 7 14:31:53 plexus vdr: [2150] [softdevice-audio] Opening alsa device default
May 7 14:31:53 plexus vdr: [2150] [softdevice-audio] Using alsa AC3 device hw:0,0
May 7 14:31:53 plexus vdr: [2150] [softdevice-audio] Device opened! Ready to play
May 7 14:31:53 plexus runvdr: restarting VDR
Der User vdr ist in den Gruppen Video und Audio. Die Setup.conf ist auf ein paar wenige Einträge zu softdevice gekürzt, da ich auch mit meiner alten setup.conf keine besseren Ergebnisse erzielen konnte. Einen Fehler kann ich leider nicht finden, vielleicht gibt es Möglichkeiten, dem Problem auf die Schliche zu kommen?
Im Syslog finde ich noch zwei Fehler, dem einen werde ich versuchen jetzt mit Tante Google ein wenig näher zu kommen (softdevice):
[1832] [softdevice-audio] Playback open error: default, Datei oder Verzeichnis nicht gefunden FATAL exiting
[ 1308.002479] saa7134[0]/irq: loog PE (parity error!) enable bit
In diesem Zusammenhang fällt natürlich auch die Meldung beim Laden des saa7134 -alsa Moduls ins Auge:
[ 1277.743655] IRQ 19/saa7134[0]: IRQF_DISABLEDs not guaranteed on shared IRQs
[ 8.032438] saa7134[0]/alsa: saa7134[0] at 0 ddff000 irq 19 registered as card -1
Vielleicht ist das Hauptproblem, die Softdevice Meldung, daher werde ich meinen Fokus auf diese legen. Falls aber hier wer noch Ideen hat ...?