Jep - mceusb macht mich etwas stutzig - aber wenn es damit geht, warum nicht.
[yavdr] LIRC für das Antec Fusion V2 einrichten
- champpain
- Geschlossen
-
-
das teil macht mich fertig.... yaVDR läuft super... nur eben die FB nicht.
ich hab die config files von easyVDR versucht.. aber nix.. die FB funnzt einfach nicht.
an was könnte das liegen, ich hab jetzt echt keine idee mehr.
unter yaVDR:
Codedmesg | grep lirc [ 11.783922] lirc_dev: IR Remote Control driver registered, major 61 [ 11.789206] lirc_imon: Driver for SoundGraph iMON MultiMedia IR/Display, v0.6 [ 11.789267] lirc_dev: lirc_register_driver: sample_rate: 0 [ 11.789406] lirc_imon: Registered iMON driver (lirc minor: 0) [ 11.813451] lirc_imon: iMON device (15c2:ffdc, intf0) on usb<3:2> initialized [ 11.813558] usbcore: registered new interface driver lirc_imon [ 16.304565] lirc_imon: IR port openedunter easyVDR:
Codedmesg | grep lirc [ 30.374854] lirc_dev: IR Remote Control driver registered, major 61 [ 30.379333] lirc_imon: Driver for Soundgraph iMON MultiMedia IR/VFD, v0.3 [ 30.379341] lirc_imon: Venky Raju <dev@venky.ws> [ 30.379389] lirc_imon: imon_probe: found IMON device [ 30.379399] lirc_dev: lirc_register_plugin: sample_rate: 0 [ 30.379612] lirc_imon: imon_probe: Registered iMON plugin(minor:0) [ 30.379728] lirc_imon: imon_probe: iMON device on usb<3:2> initialized [ 30.379762] usbcore: registered new interface driver lirc_imon [ 30.852886] lirc_imon: VFD port openedCode
Alles anzeigenroot@vdr01:/etc/lirc# cat hardware.conf # /etc/lirc/hardware.conf # #Chosen Remote Control REMOTE="Soundgraph iMON MultiMedian IR/VFD" REMOTE_MODULES="lirc_dev lirc_imon" REMOTE_DRIVER="" REMOTE_DEVICE="/dev/lirc0" REMOTE_LIRCD_CONF="imon/lircd.conf.imon-nibbler" REMOTE_LIRCD_ARGS="" #Chosen IR Transmitter TRANSMITTER="None" TRANSMITTER_MODULES="" TRANSMITTER_DRIVER="" TRANSMITTER_DEVICE="" TRANSMITTER_LIRCD_CONF="" TRANSMITTER_LIRCD_ARGS="" #Enable lircd START_LIRCD="true" #Don't start lircmd even if there seems to be a good config file #START_LIRCMD="false" #Try to load appropriate kernel modules LOAD_MODULES="true" # Default configuration files for your hardware if any LIRCMD_CONF="" #Forcing noninteractive reconfiguration #If lirc is to be reconfigured by an external application #that doesn't have a debconf frontend available, the noninteractive #frontend can be invoked and set to parse REMOTE and TRANSMITTER #It will then populate all other variables without any user input #If you would like to configure lirc via standard methods, be sure #to leave this set to "false" FORCE_NONINTERACTIVE_RECONFIGURATION="false" START_LIRCMD="" REMOTE_SOCKET="" TRANSMITTER_SOCKET=""Code
Alles anzeigenroot@vdr01:/etc/lirc# cat lircd.conf #This configuration has been automatically generated via #the Ubuntu LIRC package maintainer scripts. # #It includes the default configuration for the remote and/or #transmitter that you have selected during package installation. # #Feel free to add any custom remotes to the configuration #via additional include directives or below the existing #Ubuntu include directives from your selected remote and/or #transmitter. #Configuration for the Soundgraph iMON MultiMedian IR/VFD remote: include "/usr/share/lirc/remotes/imon/lircd.conf.imon-nibbler"Code
Alles anzeigenroot@vdr01:/usr/share/lirc/remotes/imon# cat lircd.conf.imon-nibbler # Please make this file available to others # by sending it to <lirc@bartelmus.de> # # this config file was automatically generated # using lirc-0.8.3-CVS(default) on Sun Feb 17 09:17:28 2008 # # contributed by maxx # # brand: mcelirc.conf # model no. of remote control: MCE USB Ohne Farbtasten # devices being controlled by this remote: # begin remote name mcelirc.conf bits 8 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 24 pre_data 0x800F04 gap 203977 toggle_bit_mask 0x8000 begin codes Record 0x17 Rewind 0x15 Play 0x16 Forward 0x14 Stop 0x19 Power 0x0C Replay 0x1B Pause 0x18 Skip 0x1A Menu 0x0D Back 0x23 EPG 0x26 Recordings 0x25 # LiveTV Info 0x0F Ok 0x22 Up 0x1E Down 0x1F Left 0x20 Right 0x21 Red 0x5B # Videos Green 0x5C # Musik Yellow 0x5D # TV Blue 0x5E # Bilder Volume+ 0x10 Volume- 0x11 Mute 0x0E Channel+ 0x12 Channel- 0x13 Teletext 0x24 # ABC 1 0x01 2 0x02 3 0x03 4 0x04 5 0x05 6 0x06 7 0x07 8 0x08 9 0x09 0 0x00 Delete 0x0A Eingabe 0x0B end codes end remote ######################################################################################## # Please make this file available to others # by sending it to <lirc@bartelmus.de> # # this config file was automatically generated # using lirc-0.8.3-CVS(default) on Sun Feb 17 17:30:14 2008 # # contributed by maxx # # brand: antec fusion v2 wheel # model no. of remote control: # devices being controlled by this remote: # begin remote name wheel_lirc.conf bits 16 eps 30 aeps 100 one 0 0 zero 0 0 post_data_bits 16 post_data 0x0 gap 131987 min_repeat 4 toggle_bit_mask 0x3000000 begin codes Volume- 0x0100 Volume+ 0x0001 end codes end remoteCode
Alles anzeigenroot@vdr01:/usr/share/lirc/remotes/imon# lsmod Module Size Used by nfsd 241104 9 lockd 67724 1 nfsd nfs_acl 2844 1 nfsd auth_rpcgss 36672 1 nfsd sunrpc 191776 8 nfsd,lockd,nfs_acl,auth_rpcgss exportfs 4412 1 nfsd snd_hda_codec_nvhdmi 4828 1 snd_hda_codec_realtek 203328 1 autofs4 25568 0 stb6100 7296 1 lnbp22 2624 1 stb0899 34144 1 snd_hda_intel 26920 3 snd_hda_codec 75708 3 snd_hda_codec_nvhdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 7200 1 snd_hda_codec snd_pcm 75296 3 snd_hda_intel,snd_hda_codec dvb_usb_pctv452e 17696 14 dvb_usb 19848 1 dvb_usb_pctv452e dvb_core 90600 2 dvb_usb_pctv452e,dvb_usb ttpci_eeprom 2396 1 dvb_usb_pctv452e nvidia 9855940 50 agpgart 34988 1 nvidia shpchp 32272 0 lirc_imon 25872 1 lirc_dev 10804 3 lirc_imon snd_timer 22276 1 snd_pcm snd 59204 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 7264 1 snd snd_page_alloc 9156 2 snd_hda_intel,snd_pcm i2c_nforce2 6784 0 lp 8964 0 parport 35340 1 lp forcedeth 54152 0vdr läuft irw gestartet.. tasten gedrückt.. aber irw zeigt nix..
was könnte der unterschiede sein.. an der hardware liegts ja offensichtlich nicht..
hat jemanden einen tip?liebe grüsse
nibbler -
soda... hab nun eine eigene lirc config angelernt die funnzt, anbei die files:
Code
Alles anzeigen# Please make this file available to others # by sending it to <lirc@bartelmus.de> # # this config file was automatically generated # using lirc-0.8.6(default) on Wed Apr 14 02:20:38 2010 # # contributed by lord_nibbler # # brand: mce1039 # model no. of remote control: # devices being controlled by this remote: # begin remote name mce1039 bits 8 eps 30 aeps 100 one 0 0 zero 0 0 pre_data_bits 24 pre_data 0x800F04 post_data_bits 32 post_data 0x9EAE gap 103972 toggle_bit_mask 0x800000000000 begin codes KEY_LAST 0x1B KEY_NEXT 0x1A KEY_POWER 0x0C KEY_STOP 0x19 KEY_RECORD 0x17 KEY_PAUSE 0x18 KEY_PLAY 0x16 KEY_REWIND 0x15 KEY_FORWARD 0x14 KEY_BACK 0x23 KEY_INFO 0x0F KEY_UP 0x1E KEY_DOWN 0x1F KEY_LEFT 0x20 KEY_RIGHT 0x21 KEY_OK 0x22 KEY_MENU 0x0D KEY_CHANNELDOWN 0x13 KEY_CHANNELUP 0x12 KEY_MUTE 0x0E KEY_TV 0x48 KEY_EPG 0x26 KEY_TV2 0x25 KEY_DVD 0x24 KEY_1 0x01 KEY_2 0x02 KEY_3 0x03 KEY_4 0x04 KEY_5 0x05 KEY_6 0x06 KEY_7 0x07 KEY_8 0x08 KEY_9 0x09 KEY_0 0x00 KEY_TEXT 0x5A KEY_INSERT 0x0B KEY_DELETE 0x0A KEY_RED 0x5B KEY_RED 0x5B KEY_GREEN 0x5C KEY_YELLOW 0x5D KEY_BLUE 0x5E KEY_VOLUMEDOWN 0x10 KEY_VOLUMEUP 0x11 end codes end remote/etc/vdr/remote.conf
Code
Alles anzeigenLIRC.Up KEY_UP LIRC.Down KEY_DOWN LIRC.Menu KEY_MENU LIRC.Ok KEY_OK LIRC.Left KEY_LEFT LIRC.Right KEY_RIGHT LIRC.Next KEY_NEXT LIRC.Red KEY_RED LIRC.Green KEY_GREEN LIRC.Yellow KEY_YELLOW LIRC.Blue KEY_BLUE LIRC.0 KEY_0 LIRC.1 KEY_1 LIRC.2 KEY_2 LIRC.3 KEY_3 LIRC.4 KEY_4 LIRC.5 KEY_5 LIRC.6 KEY_6 LIRC.7 KEY_7 LIRC.8 KEY_8 LIRC.9 KEY_9 LIRC.Volume+ KEY_VOLUMEUP LIRC.Volume- KEY_VOLUMEDOWN LIRC.Prev KEY_LAST LIRC.Mute KEY_MUTE LIRC.Power KEY_POWER LIRC.Channel+ KEY_CHANNELUP LIRC.Channel- KEY_CHANNELDOWN LIRC.Back KEY_BACK LIRC.Play KEY_PLAY LIRC.Pause KEY_PAUSE LIRC.Record KEY_RECORD LIRC.Stop KEY_STOP LIRC.FastFwd KEY_FORWARD LIRC.FastRew KEY_REWIND LIRC.Schedule KEY_EPG LIRC.Channels KEY_TV2 LIRC.Timers KEY_DVD LIRC.Recordings KEY_TV LIRC.User1 User1 LIRC.User2 User2 LIRC.User3 User3 LIRC.User4 User4 LIRC.User5 User5 LIRC.User6 KEY_TEXT LIRC.Info KEY_INFO KBD.Up 00000000001B5B41 KBD.Down 00000000001B5B42 KBD.Menu 000000000000006D KBD.Ok 000000000000000D KBD.Back 000000000000007F KBD.Left 00000000001B5B44 KBD.Right 00000000001B5B43 KBD.Red 000000001B5B5B41 KBD.Green 000000001B5B5B42 KBD.Yellow 000000001B5B5B43 KBD.Blue 000000001B5B5B44 KBD.0 0000000000000030 KBD.1 0000000000000031 KBD.2 0000000000000032 KBD.3 0000000000000033 KBD.4 0000000000000034 KBD.5 0000000000000035 KBD.6 0000000000000036 KBD.7 0000000000000037 KBD.8 0000000000000038 KBD.9 0000000000000039 KBD.Info 0000000000000069 KBD.FastFwd 0000001B5B31377E KBD.FastRew 000000001B5B5B45 KBD.Power 0000000000000070 KBD.Volume+ 0000001B5B32347E KBD.Volume- 0000001B5B32337E KBD.Mute 0000001B5B32317E KBD.User7 0000001B5B31387E KBD.User8 0000001B5B31397E KBD.User9 0000001B5B32307E XKeySym.Up Up XKeySym.Down Down XKeySym.Menu m XKeySym.Ok Return XKeySym.Back BackSpace XKeySym.Left Left XKeySym.Right Right XKeySym.Red F1 XKeySym.Green F2 XKeySym.Yellow F3 XKeySym.Blue F4 XKeySym.0 0 XKeySym.1 1 XKeySym.2 2 XKeySym.3 3 XKeySym.4 4 XKeySym.5 5 XKeySym.6 6 XKeySym.7 7 XKeySym.8 8 XKeySym.9 9 XKeySym.Info i XKeySym.Pause space XKeySym.FastFwd F6 XKeySym.FastRew F5 XKeySym.Power p XKeySym.Volume+ F12 XKeySym.Volume- F11 XKeySym.Mute F10 XKeySym.User7 F7 XKeySym.User8 F8 XKeySym.User9 F9 graphtft-fe.Up 0000000000000062 graphtft-fe.Down 0000000000000068 graphtft-fe.Menu 0000000000000047 graphtft-fe.Ok 0000000000000024 graphtft-fe.Back 0000000000000016 graphtft-fe.Left 0000000000000064 graphtft-fe.Right 0000000000000066 graphtft-fe.Red 0000000000000043 graphtft-fe.Green 0000000000000044 graphtft-fe.Yellow 0000000000000045 graphtft-fe.Blue 0000000000000046 graphtft-fe.0 0000000000000013 graphtft-fe.1 000000000000000A graphtft-fe.2 000000000000000B graphtft-fe.3 000000000000000C graphtft-fe.4 000000000000000D graphtft-fe.5 000000000000000E graphtft-fe.6 000000000000000F graphtft-fe.7 0000000000000010 graphtft-fe.8 0000000000000011 graphtft-fe.9 0000000000000012 graphtft-fe.Info 0000000000000048 graphtft-fe.Volume+ 0000000000000063 graphtft-fe.Volume- 0000000000000069 graphtft-fe.Mute 0000000000000067Lircmap.xml
Code
Alles anzeigen<lircmap> <remote device="mce1039"> <play>KEY_PLAY</play> <pause>KEY_PAUSE</pause> <stop>KEY_STOP</stop> <forward>KEY_FORWARD</forward> <reverse>KEY_REWIND</reverse> <left>KEY_KEFT</left> <right>KEY_RIGHT</right> <up>KEY_UP</up> <down>KEY_DOWN</down> <select>KEY_OK</select> <pageplus>KEY_CHANNELUP</pageplus> <pageminus>KEY_CHANNELDOWN-</pageminus> <back>KEY_BACK</back> <backspace>KEY_BACK</backspace> <escape>KEY_BACK</escape> <menu>KEY_MENU</menu> <title>KEY_TITLE</title> <info>KEY_INFO</info> <skipplus>KEY_NEXT</skipplus> <skipminus>KEY_LAST</skipminus> <display>KEY_MUTE</display> <start>KEY_PLAY</start> <record>KEY_RECORD</record> <volumeplus>KEY_VOLUMEUP</volumeplus> <volumeminus>KEY_VOLUMEDOWN</volumeminus> <mute>KEY_MUTE</mute> <power>KEY_POWER</power> <one>KEY_1</one> <two>KEY_2</two> <three>KEY_3</three> <four>KEY_4</four> <five>KEY_5</five> <six>KEY_6</six> <seven>KEY_7</seven> <eight>KEY_8</eight> <nine>KEY_9</nine> <zero>KEY_0</zero> <mytv>KEY_RED</mytv> <mymusic>KEY_GREEN</mymusic> <mypictures>KEY_YELLOW</mypictures> <myvideo>KEY_BLUE</myvideo> <playlist>KEY_TV</playlist> <guide>KEY_EPG</guide> </remote> </lircmap> -
Ich hatte mich jetzt auch für yaVDR (Version 0.3.0) entschieden. Ich hatte auch selbständig VDR e-Tobi auf debian zum laufen gebracht etc. aber ich scheitere hier schon an Lirc.
Ich habe ein Antec Fusion gehäuse mit LCD und imon (15c2:ffdc) und nutze eine MCE Fernbedinung, was wie gesagt schon zusammen funktionierte. Ich bekomme Signal über /dev/lirc0 rein, aber egal mit welcher Lircd ich es versuche scheinbar wird nix an /dev/lircd weitergegeben. Denn mit IRW bekomme ich nix. Habe auch schon irrecord eine Lircd.conf erstellt aber ohne Erfolg. Hab es auch schon über devinput versucht und langsam habe ich keine Idee mehr.
Ich hoffe mir kann jemand weiterhelfen, editiert habe ich immer /etc/lirc dateien... Gelesen habe ich was von templets etc. aber die dürften doch erst eine Rolle spielen, wenn ich ein update ausführe...
Ich würde mich über ein paar Antworten und lösungs Ideen freuen.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!