@all
ich lesen schon seit geraumer Zeit und habe einen easyVDR server aufgesetzt, mit 4x SAT-Budget um im Haus mehrer Clienten zu bedienen, unter anderem ein MVP (Rev E1).
Als Router fungiert ein Fritz.Box 5012.
log-datei:
Code
19:43:41.653316 [debug] UDPReplier - UDP replier started
19:43:41.653484 [info] Main - Not starting Bootpd
19:43:41.653554 [info] Main - TFTP path '/tftpboot/'
19:43:41.653572 [debug] Tftpd - Starting TFTPd
19:43:41.653678 [debug] Tftpd - Starting wait
19:43:41.653726 [debug] Tftpd - TFTP server started with base path '/tftpboot/'
19:43:41.653869 [debug] MVPRelay - MVPRelay replier started
19:43:41.653895 [info] Main - MVPRelay started
19:43:41.654038 [debug] Main - MVPServer run success
19:45:41.020384 [info] Main - Stopped main server threadvomp.conf in /etc/vdr/plugins/vompserver:
Code
[General]
## Specify a log file here to enable logging
Log file = /tmp/vompserver.log
## If you have more than one vompserver running you
## can enter a name here that will appear on the
## server select list on the MVP
Server name = easyVDRserver
## Enable this to start the built in Bootp server
## Required to boot the MVP if you have not got a
## DHCP server that can tell the MVP its boot file
## name and server
Bootp server enabled = no
## Enable this to start the built in TFTP server
## Required to boot the MVP if you have not got a
## TFTP server running elsewhere
TFTP server enabled = yes
## Base directory for TFTP server
## If you leave this blank the plugin config
## path will be used - i.e. where this file is
TFTP directory = /tftpbootvomp-XX-XX-XX-XX-XX.conf in /etc/vdr/plugins/vompserver:
Code
[Boot]
## If you enable the bootp server in vomp.conf, you can specify
## an IP to give out to this MVP here.
# IP = 10.0.0.100
## If you have a router that gives out addresses but you want
## the above address forced to the MVP, set this:
# Override IP = 1
## A file name to send to the MVP. The MVP will then request
## this file from the TFTP server. Don't use a path here!
TFTP file name = dongle.bin
[General]
Live priority = 1
Power After Boot = Last state
Language = Deutsch
Remote type = Old
Last Power State = On
## The client auto-detects whether to use PAL or NTSC. If you
## want to force the other one, set it here. Beware of popping
## your TV with this one!
# Override Video Format = NTSCIm Ordner /tftpboot:
Code
lrwxrwxrwx 1 root root 17 2008-04-21 20:02 dongle.bin -> vomp-dongle-0.2.6
-rw-r--r-- 1 root root 40 2008-04-21 18:53 dongle.bin.ver
-rwxrwxrwx 1 root users 1656864 2007-07-01 23:54 vomp-dongle-0.2.6Die dongle.bin.ver habe ich per:
Code
dd if=./dongle.bin of=./dongle.bin.ver bs=1 count=40 skip=52
erstelllt.
- wenn ich das richtig sehe, startet der tftpboot richtig, aber der MVP bleibt im Lademodus (2 Balken) stehen
- was ist mit der Datei vomp.conf im Ordner /etc/vdr/plugins, die ist bei mir leer
Hoffe ihr könnt mir helfen?
Gruß, UKFencer
P.S.: Habe die gleiche Frage im easyVDR-Forum gestellt...