Hi,
ich hab grad in mein ct'VDR eine zweite SAT TV Karte von TT budget 1401 installiert.
Die erste ist eine FF Rev. 1.3 funktioniert und wird auch erkannt.
Nun hab ich allerdings das Problem das die 2.te Karte vom VDR nicht erkannt wird.
Was muss ich hierfür tun ?
In die Datei Modules hab ich budget-ci einkommentiert.
lspci -v sieht wie folgt aus :
ZitatAlles anzeigen
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
Flags: bus master, medium devsel, latency 0
Memory at e0000000 (32-bit, prefetchable) [size=16M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: dda00000-dfafffff
Prefetchable memory behind bridge: d9800000-dd8fffff
Capabilities: [80] Power Management version 2
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at ffa0 [size=16]
Capabilities: [c0] Power Management version 2
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Flags: medium devsel, IRQ 5
Capabilities: [68] Power Management version 2
00:0e.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Siemens/Technotrend/Hauppauge DVB card rev1.3 or rev1.5
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at dffffe00 (32-bit, non-prefetchable) [size=512]
00:0f.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH Unknown device 1018
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at dffffc00 (32-bit, non-prefetchable) [size=512]
00:11.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08)
Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
I/O ports at d400 [size=64]
Memory at dfe00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at dfd00000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
Subsystem: LeadTek Research Inc. Unknown device b242
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Memory at da000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at dfaf0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0
lsmod wie folgt :
ZitatAlles anzeigen
Module Size Used by
nfs 196300 0
nfsd 196784 17
exportfs 5376 1 nfsd
lockd 53256 3 nfs,nfsd
nfs_acl 3584 2 nfs,nfsd
sunrpc 133820 13 nfs,nfsd,lockd,nfs_acl
button 6800 0
ac 5252 0
battery 9732 0
lirc_serial 12128 1
lirc_dev 13284 1 lirc_serial
ipv6 213856 14
dm_snapshot 15644 0
dm_mirror 18000 0
dm_mod 48952 2 dm_snapshot,dm_mirror
budget_ci 15232 0
tda1004x 13700 1 budget_ci
budget_core 10116 1 budget_ci
nvram 7432 0
loop 14216 0
dvb_ttpci 83524 18
lnbp21 2432 2 budget_ci,dvb_ttpci
l64781 6916 1 dvb_ttpci
saa7146_vv 41984 1 dvb_ttpci
video_buf 22532 1 saa7146_vv
saa7146 16904 4 budget_ci,budget_core,dvb_ttpci,saa7146_vv
videodev 21120 1 saa7146_vv
v4l1_compat 12164 2 saa7146_vv,videodev
v4l2_common 20480 2 saa7146_vv,videodev
evdev 9088 0
ves1820 6404 1 dvb_ttpci
stv0299 9864 2 budget_ci,dvb_ttpci
dvb_core 70184 4 budget_ci,budget_core,dvb_ttpci,stv0299
parport_pc 31524 0
tda8083 5636 1 dvb_ttpci
sp8870 6796 1 dvb_ttpci
firmware_class 9472 4 budget_ci,tda1004x,dvb_ttpci,sp8870
floppy 52004 0
parport 32200 1 parport_pc
rtc 11572 0
stv0297 7040 2 budget_ci,dvb_ttpci
ves1x93 6404 1 dvb_ttpci
ttpci_eeprom 2688 2 budget_core,dvb_ttpci
serio_raw 6532 0
via686a 14984 0
shpchp 32796 0
pci_hotplug 28088 1 shpchp
via_agp 9728 1
agpgart 29360 1 via_agp
i2c_isa 5248 1 via686a
i2c_viapro 8340 0
psmouse 34568 0
i2c_core 19472 16 budget_ci,tda1004x,budget_core,dvb_ttpci,lnbp21,l64781,ves1820,stv0299,tda8083,sp8870,stv0297,ves1x93,ttpci_eeprom,via686a,i2c_isa,i2c_viapro
pcspkr 2816 0
ext3 116488 2
jbd 47272 1 ext3
ide_cd 35616 1
cdrom 32416 1 ide_cd
ide_disk 14848 4
via82cxxx 8452 0 [permanent]
e100 32008 0
mii 5376 1 e100
generic 5508 0 [permanent]
ide_core 107760 4 ide_cd,ide_disk,via82cxxx,generic
uhci_hcd 20236 0
usbcore 109444 2 uhci_hcd
thermal 13576 0
processor 23724 1 thermal
fan 4868 0
und in der user.log steht in etwa :
ZitatAlles anzeigen
Oct 16 19:35:39 vdr2 vdr: [5874] no DVB device found
Oct 16 19:35:39 vdr2 vdr: [5874] [general.debug] probing /dev/dvb/adapter0/frontend0
Oct 16 19:35:39 vdr2 vdr: [5874] [general.debug] capturing device 0
Oct 16 19:35:39 vdr2 vdr: [5887] tuner on device 1 thread started (pid=5887, tid=5887)
Oct 16 19:35:39 vdr2 vdr: [5888] section handler thread started (pid=5888, tid=5888)
Oct 16 19:35:39 vdr2 vdr: [5874] [general.info] captured 1 video device
Oct 16 19:35:41 vdr2 vdr: [5874] switching to channel 1
Oct 16 19:35:41 vdr2 vdr: [5874] creating directory /var/cache/vdr/vtx/S19.2E-1-1101-28106
Oct 16 19:35:41 vdr2 vdr: [5931] receiver on device 1 thread started (pid=5931, tid=5931)
Oct 16 19:35:41 vdr2 vdr: [5932] TS buffer on device 1 thread started (pid=5932, tid=5932)
Doch was muss ich noch tun , daß ich z.b. auf der zweiten Karte aufnehmen kann währen ichauf der 1ste TV schaue ...
Der VDR sagt es wäre nur eine vorhanden .
und dann: