DVD am USB Adapter --> Device?

Slugshot · 13. August 2007

Hi!

ich möchte/muss im Moment mein DVD-Laufwerk am IDE2USB Converter betreiben. Nur weiss ich nicht welches Device ich ansprechen muss, damit ich es einbinden kann.

cat /proc/bus/usb/devices gibt mir folgendes aus:

T: Bus=05 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=152d ProdID=2338 Rev= 1.00
S: Manufacturer=JMicron
S: Product=USB to ATA/ATAPI Bridge
S: SerialNumber=152D203380B6
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

das sollte mein DVD Laufwerk sein.

Bitte um Hilfe!!!

THX

ThomasHS · 13. August 2007

Moin,

Normalerweise werden USB-Massenspeicher über die SCSI-Emulation eingebunden.
Schau mal in die Ausgabe des Logfiles und von dmesg.
Dort sollte ein Gerät /dev/sd? auftauchen.

Gruß Thomas

Slugshot · 13. August 2007

nein, taucht leider nichts auf. finde zwar device sda, aber das ist meine sata platte.
für weitere hinweise wär ich echt dankbar!!

Macavity · 13. August 2007

Logfiles könnten helfen:

Was sagt
- dmesg
- lsusb
- /cat /var/log/messages

Gruss

Macavity

Slugshot · 13. August 2007

also aus logread -f bekomm ich folgendes raus, nachdem ich das gerät gezogen und wieder gesteckt habe:
lsusb kennt mein system net

Code

Aug 13 23:18:21 linvdr user.info kernel: [ 218.233316] usb 5-4: USB disconnect, address 3
Aug 13 23:18:21 linvdr user.notice root: removed /proc/bus/usb/005/003
Aug 13 23:18:21 linvdr user.notice root: removed /proc/bus/usb/005/003
Aug 13 23:18:21 linvdr user.notice root: /usr/bin/rescan-scsi-bus.sh: line 26: test: /sys/class/scsi_host/host0: binary operator expected
Aug 13 23:18:21 linvdr user.notice root: /usr/bin/rescan-scsi-bus.sh: line 26: test: /sys/class/scsi_host/host0: binary operator expected
Aug 13 23:18:21 linvdr user.notice root: Host adapter 0 (ata_piix) found.
Aug 13 23:18:21 linvdr user.notice root: Host adapter 1 (ata_piix) found.
Aug 13 23:18:21 linvdr user.notice root: Scanning hosts 0 1 channels 0 for
Aug 13 23:18:21 linvdr user.notice root: SCSI target IDs 0 1 2 3 4 5 6 7 , LUNs 0
Aug 13 23:18:21 linvdr user.notice root: Scanning for device 0 0 0 0 ...
Aug 13 23:18:21 linvdr user.notice root: Host adapter 0 (ata_piix) found.
Aug 13 23:18:21 linvdr user.notice root: Host adapter 1 (ata_piix) found.
Aug 13 23:18:21 linvdr user.notice root: Scanning hosts 0 1 channels 0 for
Aug 13 23:18:21 linvdr user.notice root: SCSI target IDs 0 1 2 3 4 5 6 7 , LUNs 0
Aug 13 23:18:21 linvdr user.notice root: Scanning for device 0 0 0 0 ...
Aug 13 23:18:21 linvdr user.info kernel: [ 218.246311] ata1: soft resetting port
Aug 13 23:18:21 linvdr user.warn kernel: [ 218.410731] ATA: abnormal status 0x7F on port 0x0001a807
Aug 13 23:18:21 linvdr user.warn kernel: [ 218.421499] ATA: abnormal status 0x7F on port 0x0001a807
Aug 13 23:18:21 linvdr user.info kernel: [ 218.446681] ata1.01: configured for UDMA/133
Aug 13 23:18:21 linvdr user.info kernel: [ 218.446684] ata1: EH pending after completion, repeating EH (cnt=4)
Aug 13 23:18:21 linvdr user.info kernel: [ 218.446705] ata1: soft resetting port
Aug 13 23:18:21 linvdr user.warn kernel: [ 218.611112] ATA: abnormal status 0x7F on port 0x0001a807
Aug 13 23:18:21 linvdr user.warn kernel: [ 218.621863] ATA: abnormal status 0x7F on port 0x0001a807
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 1 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 1 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: Host: scsi0 Channel: 00 Id: 01 Lun: 00
Aug 13 23:18:21 linvdr user.notice root: OLD: Host: scsi0 Channel: 00 Id: 01 Lun: 00
Aug 13 23:18:21 linvdr user.notice root: Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10
Aug 13 23:18:21 linvdr user.notice root: Type: Direct-Access ANSI SCSI revision: 05
Aug 13 23:18:21 linvdr user.notice root: Scanning for device 0 0 2 0 ...
Aug 13 23:18:21 linvdr user.notice root: Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10
Aug 13 23:18:21 linvdr user.notice root: Type: Direct-Access ANSI SCSI revision: 05
Aug 13 23:18:21 linvdr user.notice root: Scanning for device 0 0 2 0 ...
Aug 13 23:18:21 linvdr user.info kernel: [ 218.646027] ata1.01: configured for UDMA/133
Aug 13 23:18:21 linvdr user.info kernel: [ 218.646031] ata1: EH complete
Aug 13 23:18:21 linvdr user.notice kernel: [ 218.647863] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Aug 13 23:18:21 linvdr user.notice kernel: [ 218.648859] sda: Write Protect is off
Aug 13 23:18:21 linvdr user.debug kernel: [ 218.648861] sda: Mode Sense: 00 3a 00 00
Aug 13 23:18:21 linvdr user.notice kernel: [ 218.649934] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 23:18:21 linvdr user.notice kernel: [ 218.649948] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Aug 13 23:18:21 linvdr user.notice kernel: [ 218.649954] sda: Write Protect is off
Aug 13 23:18:21 linvdr user.debug kernel: [ 218.649955] sda: Mode Sense: 00 3a 00 00
Aug 13 23:18:21 linvdr user.notice kernel: [ 218.649965] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Aug 13 23:18:21 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Aug 13 23:18:21 linvdr user.info kernel: [ 218.674075] ata2: soft resetting port
Aug 13 23:18:21 linvdr user.warn kernel: [ 218.839333] ATA: abnormal status 0x7F on port 0x0001a007
Aug 13 23:18:21 linvdr user.info kernel: [ 218.839338] ata2: EH pending after completion, repeating EH (cnt=4)
Aug 13 23:18:21 linvdr user.info kernel: [ 218.839357] ata2: soft resetting port
Aug 13 23:18:22 linvdr user.warn kernel: [ 219.004149] ATA: abnormal status 0x7F on port 0x0001a007
Aug 13 23:18:22 linvdr user.info kernel: [ 219.004154] ata2: EH complete
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Aug 13 23:18:22 linvdr user.info kernel: [ 219.007217] ata2: soft resetting port
Aug 13 23:18:22 linvdr user.warn kernel: [ 219.172043] ATA: abnormal status 0x7F on port 0x0001a007
Aug 13 23:18:22 linvdr user.info kernel: [ 219.172049] ata2: EH pending after completion, repeating EH (cnt=4)
Aug 13 23:18:22 linvdr user.info kernel: [ 219.172070] ata2: soft resetting port
Aug 13 23:18:22 linvdr user.warn kernel: [ 219.336961] ATA: abnormal status 0x7F on port 0x0001a007
Aug 13 23:18:22 linvdr user.info kernel: [ 219.336966] ata2: EH complete
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Aug 13 23:18:22 linvdr user.notice root: 0 device(s) removed.
Aug 13 23:18:22 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Aug 13 23:18:22 linvdr user.notice root: 0 device(s) removed.
Aug 13 23:18:33 linvdr user.info kernel: [ 230.637985] usb 5-4: new high speed USB device using ehci_hcd and address 5
Aug 13 23:18:33 linvdr user.info kernel: [ 230.756090] usb 5-4: configuration #1 chosen from 1 choice
Aug 13 23:18:34 linvdr user.notice root: unknown device
Aug 13 23:18:34 linvdr user.notice root: unknown device
Aug 13 23:18:34 linvdr user.notice root: added /proc/bus/usb/005/005
Aug 13 23:18:34 linvdr user.notice root: added /proc/bus/usb/005/005
Aug 13 23:18:34 linvdr user.notice root: /usr/bin/rescan-scsi-bus.sh: line 26: test: /sys/class/scsi_host/host0: binary operator expected
Aug 13 23:18:34 linvdr user.notice root: Host adapter 0 (ata_piix) found.
Aug 13 23:18:34 linvdr user.notice root: Host adapter 1 (ata_piix) found.
Aug 13 23:18:34 linvdr user.info kernel: [ 231.773432] ata1: soft resetting port
Aug 13 23:18:34 linvdr user.notice root: Scanning hosts 0 1 channels 0 for
Aug 13 23:18:34 linvdr user.notice root: SCSI target IDs 0 1 2 3 4 5 6 7 , LUNs 0
Aug 13 23:18:34 linvdr user.notice root: Scanning for device 0 0 0 0 ...
Aug 13 23:18:34 linvdr user.notice root: /usr/bin/rescan-scsi-bus.sh: line 26: test: /sys/class/scsi_host/host0: binary operator expected
Aug 13 23:18:34 linvdr user.notice root: Host adapter 0 (ata_piix) found.
Aug 13 23:18:34 linvdr user.notice root: Host adapter 1 (ata_piix) found.
Aug 13 23:18:34 linvdr user.notice root: Scanning hosts 0 1 channels 0 for
Aug 13 23:18:34 linvdr user.notice root: SCSI target IDs 0 1 2 3 4 5 6 7 , LUNs 0
Aug 13 23:18:34 linvdr user.notice root: Scanning for device 0 0 0 0 ...
Aug 13 23:18:34 linvdr user.warn kernel: [ 231.937421] ATA: abnormal status 0x7F on port 0x0001a807
Aug 13 23:18:34 linvdr user.warn kernel: [ 231.948216] ATA: abnormal status 0x7F on port 0x0001a807
Aug 13 23:18:35 linvdr user.info kernel: [ 231.973328] ata1.01: configured for UDMA/133
Aug 13 23:18:35 linvdr user.info kernel: [ 231.973333] ata1: EH pending after completion, repeating EH (cnt=4)
Aug 13 23:18:35 linvdr user.info kernel: [ 231.973355] ata1: soft resetting port
Aug 13 23:18:35 linvdr user.warn kernel: [ 232.137726] ATA: abnormal status 0x7F on port 0x0001a807
Aug 13 23:18:35 linvdr user.warn kernel: [ 232.148467] ATA: abnormal status 0x7F on port 0x0001a807
Aug 13 23:18:35 linvdr user.info kernel: [ 232.170578] ata1.01: configured for UDMA/133
Aug 13 23:18:35 linvdr user.info kernel: [ 232.170582] ata1: EH complete
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 1 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 1 0 ...
Aug 13 23:18:35 linvdr user.notice kernel: [ 232.172414] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Aug 13 23:18:35 linvdr user.notice kernel: [ 232.173409] sda: Write Protect is off
Aug 13 23:18:35 linvdr user.debug kernel: [ 232.173412] sda: Mode Sense: 00 3a 00 00
Aug 13 23:18:35 linvdr user.notice root: OLD: Host: scsi0 Channel: 00 Id: 01 Lun: 00
Aug 13 23:18:35 linvdr user.notice root: OLD: Host: scsi0 Channel: 00 Id: 01 Lun: 00
Aug 13 23:18:35 linvdr user.notice kernel: [ 232.175402] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 23:18:35 linvdr user.notice kernel: [ 232.176403] SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
Aug 13 23:18:35 linvdr user.notice root: Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10
Aug 13 23:18:35 linvdr user.notice root: Type: Direct-Access ANSI SCSI revision: 05
Aug 13 23:18:35 linvdr user.notice root: Scanning for device 0 0 2 0 ...
Aug 13 23:18:35 linvdr user.notice root: Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10
Aug 13 23:18:35 linvdr user.notice root: Type: Direct-Access ANSI SCSI revision: 05
Aug 13 23:18:35 linvdr user.notice root: Scanning for device 0 0 2 0 ...
Aug 13 23:18:35 linvdr user.notice kernel: [ 232.177392] sda: Write Protect is off
Aug 13 23:18:35 linvdr user.debug kernel: [ 232.177395] sda: Mode Sense: 00 3a 00 00
Aug 13 23:18:35 linvdr user.notice kernel: [ 232.179402] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 3 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 4 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 5 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 6 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 0 0 7 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 0 0 ...
Aug 13 23:18:35 linvdr user.info kernel: [ 232.201434] ata2: soft resetting port
Aug 13 23:18:35 linvdr user.warn kernel: [ 232.366876] ATA: abnormal status 0x7F on port 0x0001a007
Aug 13 23:18:35 linvdr user.info kernel: [ 232.366882] ata2: EH pending after completion, repeating EH (cnt=4)
Aug 13 23:18:35 linvdr user.info kernel: [ 232.366900] ata2: soft resetting port
Aug 13 23:18:35 linvdr user.warn kernel: [ 232.531691] ATA: abnormal status 0x7F on port 0x0001a007
Aug 13 23:18:35 linvdr user.info kernel: [ 232.531697] ata2: EH complete
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 1 0 ...
Aug 13 23:18:35 linvdr user.info kernel: [ 232.534712] ata2: soft resetting port
Aug 13 23:18:35 linvdr user.warn kernel: [ 232.699508] ATA: abnormal status 0x7F on port 0x0001a007
Aug 13 23:18:35 linvdr user.info kernel: [ 232.699514] ata2: EH pending after completion, repeating EH (cnt=4)
Aug 13 23:18:35 linvdr user.info kernel: [ 232.699532] ata2: soft resetting port
Aug 13 23:18:35 linvdr user.warn kernel: [ 232.864366] ATA: abnormal status 0x7F on port 0x0001a007
Aug 13 23:18:35 linvdr user.info kernel: [ 232.864371] ata2: EH complete
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 2 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 3 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 4 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 5 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 6 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[AScanning for device 1 0 7 0 ...
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Aug 13 23:18:35 linvdr user.notice root: 0 device(s) removed.
Aug 13 23:18:35 linvdr user.notice root: OLD: ^MNEW: ^M^[[A0 new device(s) found.
Aug 13 23:18:35 linvdr user.notice root: 0 device(s) removed.

Alles anzeigen

DVD am USB Adapter --> Device?

Jetzt mitmachen!

Teilen