Hi folks,
bin erst seit 2 Wochen stolzer Besitzer eines VDR. Funzt auch (fast) alles nach Wunsch.
Aber eben nur fast...
Mein Problem: der VDR faehrt nicht hoch, wenn ich einen Timer programmiert habe.
Nach etwas nachforschen habe ich festgestellt, das es an dem "grub-reboot" liegen koennte.
Wenn ich naemlich ueber die Konsole:
eingebe, dann manuell einen "reboot" mache und danach "halt", faehrt der VDR erwartungsgemaess nach ein paar Minuten wieder hoch.
Nach einem "grub-reboot 1" macht der VDR zwar einen reboot und schaltet danach ab, faehrt aber nicht wie geplant wieder hoch. Das es auch so in der vdr-nvram-wakeup.conf steht ist ja auch logisch, dass es bei einem shutdown des VDR nicht funzen kann...
Irgendwelche Tips, Vorschlaege, workarounds?!?
hier noch evtl. nuetzliche configfiles:
/boot/grub/menu.lst:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default saved
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
# Pretty colours
color cyan/blue white/blue
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Debian GNU/Linux, kernel 2.6.18-4-486
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-4-486 root=/dev/hda1 ro
initrd /boot/initrd.img-2.6.18-4-486
savedefault
#title Debian GNU/Linux, kernel 2.6.18-4-486 (single-user mode)
#root (hd0,0)
#kernel /boot/vmlinuz-2.6.18-4-486 root=/dev/hda1 ro single
#initrd /boot/initrd.img-2.6.18-4-486
#savedefault
title PowerOff
root (hd0,0)
savedefault 0
halt
### END DEBIAN AUTOMAGIC KERNELS LIST
Alles anzeigen
/etc/nvram-wakeup.conf
################################################
## Mainboard autodetection information:
##
## - Mainboard vendor: "MICRO-STAR INTERNATIONAL CO., LTD"
## - Mainboard type: "MS-6391"
## - Mainboard revision: ""
## - BIOS vendor: "Award Software International, Inc."
## - BIOS version: "6.00 PG"
## - BIOS release: "09/12/2001"
addr_stat = 0x46
addr_day = 0x47
addr_hour = 0x48
addr_min = 0x49
addr_sec = 0x4A
addr_chk_h = 0x6F
addr_chk_l = 0x70
upper_method = INTEL
need_reboot = ON_ANY_CHANGE
Alles anzeigen
/etc/vdr/vdr-nvram-wakeup.conf
#
# Configuration file for the VDR nvram-wakeup shutdown hook
#
# This is NOT the nvram-wakeup configuration file, which you can find in
# /etc/nvram-wakeup.conf and which must be set in COMMANDLINE (see below),
# if your mainboard ins not detected automatically.
#
# Set to "yes" to enable nvram-wakeup for VDR
#
ENABLED="yes"
# Here you can specify additional command line parameters, that will be passed
# to nvram-wakeup.
#
# i.e.:
# COMMANDLINE="-I ecs_k7s5au" # mainboard of type K7S5au
# COMMANDLINE="-C /etc/nvram-wakeup.conf" # use config file
#
# see "man nvram-wakeup"
#
#COMMANDLINE="--directisa -C /etc/nvram-wakeup.conf"
COMMANDLINE="--directisa -C /etc/nvram-wakeup.conf"
# If your mainboard needs to reboot before shutting down, set the command(s) to
# do this here. i.e.:
#
# SPECIALSHUTDOWN="lilo -R PowerOff ; shutdown -r now"
#
SPECIALSHUTDOWN="echo y | grub-reboot 1"
# To force a reboot whenever nvram-wakeup sets the time, independently of
# whether a reboot is required, enable this option.
#
FORCE_REBOOT="yes"
#
# If you want your VDR machine to wakeup in regular intervals (i.e. for
# updating EPG data), specify a day interval and a wakeup time:
#
REGULAR_DAYS=0 # 0=disabled, 1=each day, 2=each 2'nd day, 3=...
REGULAR_TIME=01:00 # HH:MM
Alles anzeigen