Fernbedienung funzt nach VDR Neustart nicht mehr

Hallo,

Nach dem Start vom VDR funzt die FB korrekt, nach einem Neustart des VDR, z.B. aus dem Menü, oder durch Fehler, funzt die FB nicht mehr. Nur ein Reboot des Systems behebt das Problem.

Ich vermute, nach durchsuchen der Log-Dateien, dass die DVB-S Karten nach einem Neustart der VDR in der Reihenfolge vertauscht werden und daher die WinTV Nova ohne FB Anschluss dann angesprochen wird.
Oder das die VDR Rechte mir da einen bösen Streich spielen.

Kennt jemand die Lösung?

Schomi67
(Linux-Rookie)

Software:
- c't VDR: 1.3.37-1ctvdr1 /Version 4.5 unfree
- Kernel : 2.6.12-ct-1
Hardware:
- Barebone Hermes MSI 651-P
- Intel Celeron 2,0GHz, 512Mb RAM, 160Gb Festplatte
- WinTV Nexus-S und Nova-S
- DSL-Router

Ich nutze die original FB von Haupauge. Mit der VDR Version 3 hatte ich das Problem nicht.

Hier noch die messages und syslog Auszüge:

Auszug aus Messages:
----------------------------------------------------------------------------------------------------------
Restart bei laufenden VDR über OSD:
...
Mar 5 15:52:27 localhost vdr[29248]: setting primary device to 1
Mar 5 15:52:27 localhost vdr[29248]: device 1 has no MPEG decoder
Mar 5 15:52:27 localhost vdr[29248]: trying device number 2 instead
Mar 5 15:52:27 localhost vdr[29248]: setting primary device to 2
...

Neustart des Rechners:
...
Mar 5 15:56:33 localhost kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
Mar 5 15:56:33 localhost kernel: adapter has MAC addr = 00:d0:5c:22:9f:6f
Mar 5 15:56:33 localhost kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Mar 5 15:56:33 localhost kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
Mar 5 15:56:33 localhost kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Mar 5 15:56:33 localhost kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
Mar 5 15:56:33 localhost kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Mar 5 15:56:33 localhost kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Mar 5 15:56:33 localhost kernel: dvb-ttpci: found av7110-0.
Mar 5 15:56:33 localhost kernel: saa7146: register extension 'budget_ci dvb'.
Mar 5 15:56:33 localhost kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Mar 5 15:56:33 localhost kernel: saa7146: found saa7146 @ mem cebc0c00 (revision 1, irq 11) (0x13c2,0x100f).
Mar 5 15:56:33 localhost kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
...
Mar 5 15:56:33 localhost kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
Mar 5 15:56:33 localhost kernel: adapter has MAC addr = 00:d0:5c:23:d7:30
Mar 5 15:56:33 localhost kernel: DVB: registering frontend 1 (ST STV0299 DVB-S)...
Mar 5 15:56:33 localhost kernel: ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
Mar 5 15:56:33 localhost kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
Mar 5 15:56:33 localhost kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
...
Mar 5 15:56:50 localhost vdr[4892]: found 2 video devices
...
Mar 5 15:56:50 localhost vdr[4892]: setting primary device to 1
...

Auszug aus syslog:

Restart bei laufenden VDR über OSD:
...
Mar 5 15:52:07 localhost kernel: saa7146: register extension 'budget_ci dvb'.
Mar 5 15:52:07 localhost kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Mar 5 15:52:07 localhost kernel: saa7146: found saa7146 @ mem cea9ec00 (revision 1, irq 11) (0x13c2,0x100f).
Mar 5 15:52:07 localhost kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
Mar 5 15:52:07 localhost kernel: adapter has MAC addr = 00:d0:5c:23:d7:30
Mar 5 15:52:07 localhost udev[28836]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.demux0' becomes '%c'
Mar 5 15:52:07 localhost udev[28836]: creating device node '/dev/dvb/adapter0/demux0'
Mar 5 15:52:07 localhost udev[28869]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.dvr0' becomes '%c'
Mar 5 15:52:07 localhost udev[28869]: creating device node '/dev/dvb/adapter0/dvr0'
Mar 5 15:52:07 localhost udev[28879]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.net0' becomes '%c'
Mar 5 15:52:07 localhost udev[28879]: creating device node '/dev/dvb/adapter0/net0'
Mar 5 15:52:07 localhost udev[28889]: configured rule in '/etc/udev/rules.d/udev.rules[67]' applied, 'event0' becomes 'input/%k'
Mar 5 15:52:07 localhost udev[28889]: creating device node '/dev/input/event0'
Mar 5 15:52:07 localhost input.agent[28903]: evdev: already loaded
Mar 5 15:52:07 localhost input.agent[28892]: evdev: already loaded
Mar 5 15:52:08 localhost kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Mar 5 15:52:08 localhost udev[28954]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb0.frontend0' becomes '%c'
Mar 5 15:52:08 localhost udev[28954]: creating device node '/dev/dvb/adapter0/frontend0'
Mar 5 15:52:08 localhost kernel: saa7146: register extension 'dvb'.
Mar 5 15:52:08 localhost kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Mar 5 15:52:08 localhost kernel: saa7146: found saa7146 @ mem ceaa0e00 (revision 1, irq 11) (0x13c2,0x0003).
Mar 5 15:52:08 localhost kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
Mar 5 15:52:08 localhost kernel: adapter has MAC addr = 00:d0:5c:22:9f:6f
Mar 5 15:52:08 localhost kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Mar 5 15:52:08 localhost kernel: dvb-ttpci: info @ card 1: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
Mar 5 15:52:08 localhost kernel: dvb-ttpci: firmware @ card 1 supports CI link layer interface
Mar 5 15:52:08 localhost kernel: dvb-ttpci: Crystal audio DAC @ card 1 detected
Mar 5 15:52:08 localhost kernel: saa7146_vv: saa7146 (1): registered device video0 [v4l2]
Mar 5 15:52:08 localhost kernel: DVB: registering frontend 1 (ST STV0299 DVB-S)...
Mar 5 15:52:08 localhost kernel: dvb-ttpci: found av7110-0.
Mar 5 15:52:08 localhost input.agent[29017]: evdev: already loaded
Mar 5 15:52:18 localhost udev[29103]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb1.demux0' becomes '%c'
Mar 5 15:52:18 localhost udev[29103]: creating device node '/dev/dvb/adapter1/demux0'
Mar 5 15:52:18 localhost udev[29104]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb1.dvr0' becomes '%c'
Mar 5 15:52:18 localhost udev[29104]: creating device node '/dev/dvb/adapter1/dvr0'
Mar 5 15:52:18 localhost udev[29105]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb1.video0' becomes '%c'
Mar 5 15:52:18 localhost udev[29105]: creating device node '/dev/dvb/adapter1/video0'
Mar 5 15:52:18 localhost udev[29106]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb1.audio0' becomes '%c'
Mar 5 15:52:18 localhost udev[29106]: creating device node '/dev/dvb/adapter1/audio0'
Mar 5 15:52:19 localhost udev[29107]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb1.ca0' becomes '%c'
Mar 5 15:52:19 localhost udev[29107]: creating device node '/dev/dvb/adapter1/ca0'
Mar 5 15:52:19 localhost udev[29108]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb1.osd0' becomes '%c'
Mar 5 15:52:19 localhost udev[29108]: creating device node '/dev/dvb/adapter1/osd0'
Mar 5 15:52:19 localhost udev[29109]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb1.net0' becomes '%c'
Mar 5 15:52:19 localhost udev[29109]: creating device node '/dev/dvb/adapter1/net0'
Mar 5 15:52:19 localhost udev[29110]: creating device node '/dev/video0'
Mar 5 15:52:19 localhost udev[29136]: configured rule in '/etc/udev/rules.d/udev.rules[67]' applied, 'event1' becomes 'input/%k'
Mar 5 15:52:19 localhost udev[29136]: creating device node '/dev/input/event1'
Mar 5 15:52:19 localhost udev[29127]: configured rule in '/etc/udev/rules.d/udev.rules[36]' applied, 'dvb1.frontend0' becomes '%c'
Mar 5 15:52:19 localhost udev[29127]: creating device node '/dev/dvb/adapter1/frontend0'
Mar 5 15:52:19 localhost input.agent[29183]: evdev: already loaded
...
Mar 5 15:52:27 localhost vdr[29248]: found 2 video devices
...
Mar 5 15:52:27 localhost vdr[29248]: initializing plugin: remote (0.3.3): Remote control
Mar 5 15:52:27 localhost vdr[29248]: initializing plugin: timeline (0.9.0): Show timer overview and collisions
Mar 5 15:52:27 localhost vdr[29248]: setting primary device to 1
Mar 5 15:52:27 localhost vdr[29248]: device 1 has no MPEG decoder
Mar 5 15:52:27 localhost vdr[29248]: trying device number 2 instead
Mar 5 15:52:27 localhost vdr[29248]: setting primary device to 2
Mar 5 15:52:27 localhost vdr[29248]: SVDRP listening on port 2001
...
-------------------------------------------
Ende messages

Neustart des Rechners:
...
Mar 5 15:56:33 localhost kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X).
Mar 5 15:56:33 localhost kernel: adapter has MAC addr = 00:d0:5c:22:9f:6f
Mar 5 15:56:33 localhost kernel: dvb-ttpci: gpioirq unknown type=0 len=0
Mar 5 15:56:33 localhost kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622
Mar 5 15:56:33 localhost kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface
Mar 5 15:56:33 localhost kernel: dvb-ttpci: Crystal audio DAC @ card 0 detected
Mar 5 15:56:33 localhost kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2]
Mar 5 15:56:33 localhost kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)...
Mar 5 15:56:33 localhost kernel: dvb-ttpci: found av7110-0.
Mar 5 15:56:33 localhost kernel: saa7146: register extension 'budget_ci dvb'.
Mar 5 15:56:33 localhost kernel: ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
Mar 5 15:56:33 localhost kernel: saa7146: found saa7146 @ mem cebc0c00 (revision 1, irq 11) (0x13c2,0x100f).
Mar 5 15:56:33 localhost kernel: DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
Mar 5 15:56:33 localhost kernel: adapter has MAC addr = 00:d0:5c:23:d7:30
Mar 5 15:56:33 localhost kernel: DVB: registering frontend 1 (ST STV0299 DVB-S)...
Mar 5 15:56:33 localhost kernel: ieee1394: Initialized config rom entry `ip1394'
Mar 5 15:56:33 localhost kernel: ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
Mar 5 15:56:33 localhost kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
Mar 5 15:56:33 localhost kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
...
Mar 5 15:56:50 localhost vdr[4892]: found 2 video devices
...
Mar 5 15:56:50 localhost vdr[4892]: setting primary device to 1
Mar 5 15:56:50 localhost vdr[4892]: SVDRP listening on port 2001
...
-------------------------------------------
Ende syslog

Kann ich bei dem Hermes Barebone leider nicht, da die Nexus-S zu lang ist. Daher suche ich eine andere Möglichkeit.

Schomi