LIRC geht immer erst nach VDR-Restart

Hallo zusammen!
Bin noch recht neu hier und habe unter SuSE 9.1 jetzt zum 2. Mal einen VDR nach der Anleitung vom Eierdieb (www.hardcoreaudio.de) eingerichtet. Soweit alles prima! Danke Eierdieb!!:tup
Aber jetzt, auf der endgültigen Maschine, habe ich zum 1. Mal Lirc eingerichtet (mit der ATI Remote Wonder). Soweit auch alles prima. Ich habe, wie Eierdieb beschrieb, auch dafür gesorgt, dass Lirc vor dem VDR gestartet wird, was definitiv der Fall ist. Jedoch funzt das Fernbedienen erst, nachdem ich den VDR restartet habe. (ich mache das normalerweise über kvdr und manuelle (Tastatur) Auswahl von "Einstellungen -> Neustarten". Danach geht alles wie gewünscht auch mit der Fernbeienung.

Kann mir jemand helfen.
Habe schon das ganze Forum durchsucht aber kein vergleichbares Problem gefunden. Wenn es die falsche Reihenfolge in der /etc/init.d/rc5.d wäre, aber das ist es eben nicht!! Sehe ich auch an den Bootmeldungen.
Danke!
Jente

Danke schonmal für die Reaktion! Hier also das /var/log/boot.msg.

Bin zwar nicht der Log-Profi, aber für mich sieht das gut aus.
Gib doch mal Deinen Bericht wie Du sie findest!
Danke!
Jente

P.S.: Lirc ist lirc-0.7.0 selbst-kompiliert
vdr ist: vdr-1.3.11 selbst-kompiliert, alles quasi so, wie Eierdieb es vorschlägt... (gut er hat den vdr-1.3.10 und lirc-0.6.6 aber ich glaube nicht, dass das hier das Problem sein kann ;D, aber ich weiß es eben nicht!!?( also danke für Korrekturen!!)

Und, wo wir gearde dabei sind, habe aber noch nicht recherchiert: Durch die Fernbedienung habe ich ja jetzt die Möglichkeit den Compi direkt auszuschalten. Es kommt allerdings die Meldung "Shutdown unmöglich -Option '-s' fehlt!". Ich ahbe das shutdown.sh-Skript in /etc/vdr befolgt und die sudoers-Datei entsprächend geändert, aber nichts passiert. Auch habe ich Laienhaft versucht das Skript bzw. die sudoers-Zeile zu vereinfachen und direkt die -s Option an den /sbin/halt-Befehl ohne die Verwendung von Variablen zu hängen, also: /sbin/halt -s was auch immer das heißt. Ich benutze sonst (z.B. in Cron) den shutdown-Befehl

Inhalt /var/log/boot.msg:

Inspecting /boot/System.map-2.6.4-52-default
Loaded 23439 symbols from /boot/System.map-2.6.4-52-default.
Symbols match kernel version 2.6.4.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.4-52-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 Wed Apr 7 02:08:30 UTC 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
<4> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
<4> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>757MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>255MB LOWMEM available.
<4>On node 0 totalpages: 65520
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 61424 pages, LIFO batch:14
<4> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.1 present.
<5>ACPI disabled because your bios is from 99 and too old
<5>You can enable it with acpi=force
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/hde2 vga=0x314 desktop resume=/dev/hde1
<6>Initializing CPU#0
<4>PID hash table entries: 1024 (order 10: 8192 bytes)
<4>CKRM Initialized
<4>Detected 600.082 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour dummy device 80x25
<6>Memory: 255016k/262080k available (1969k kernel code, 6332k reserved, 677k data, 212k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay loop... 1183.74 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Initializing.
<6>SELinux: Starting in permissive mode
<6>There is already a security framework initialized, register_security failed.
<6>Failure registering capabilities with the kernel
<6>selinux_register_security: Registering secondary module capability
<6>Capability LSM initialized
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 1066k freed
<7>CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 512K
<5>CPU serial number disabled.
<7>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>CPU: Intel Pentium III (Katmai) stepping 03
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>do_initcalls
<4>init_elf_binfmt
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb180, last bus=1
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<6>ACPI: Interpreter disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<4>ACPI: ACPI tables contain no PCI IRQ routing entries
<4>PCI: Invalid ACPI-PCI IRQ routing table
<4>PCI: Probing PCI hardware
<4>PCI: Probing PCI hardware (bus 00)
<4> ... the first call_usermodehelper: pci_bus
<6>PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:07.0
<6>vesafb: framebuffer at 0xe6000000, mapped to 0xd0800000, size 16384k
<6>vesafb: mode is 800x600x16, linelength=1600, pages=16
<6>vesafb: protected mode interface info at c000:7e6b
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
<4>Initial HugeTLB pages allocated: 0
<6>ikconfig 0.7 with /proc/config*
<5>VFS: Disk quotas dquot_6.5.1
<6>SELinux: Registering netfilter hooks
<6>Initializing Cryptographic API
<6>Limiting direct PCI/PCI transfers.
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>bootsplash 3.1.6-2004/03/31: looking for picture.... silentjpeg size 27761 bytes, found (800x600, 11810 bytes, v3).
<4>Console: switching to colour frame buffer device 92x32
<6>Real Time Clock Driver v1.12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>Using anticipatory io scheduler
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>PIIX4: IDE controller at PCI slot 0000:00:07.1
<6>PIIX4: chipset revision 1
<6>PIIX4: not 100%% native mode: will probe irqs later
<6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
<6>PDC20268: IDE controller at PCI slot 0000:00:0b.0
<6>PCI: Found IRQ 11 for device 0000:00:0b.0
<6>PDC20268: chipset revision 2
<6>PDC20268: ROM enabled at 0xe9000000
<6>PDC20268: 100%% native mode on irq 11
<6> ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:pio, hdf:pio
<6> ide3: BM-DMA at 0xe808-0xe80f, BIOS settings: hdg:pio, hdh:pio
<4>hde: WDC WD200EB-32BHF0, ATA DISK drive
<4>ide2 at 0xd800-0xd807,0xdc02 on irq 11
<4>hdg: RICOH CD-R/RW MP7083A, ATAPI CD/DVD-ROM drive
<4>ide3 at 0xe000-0xe007,0xe402 on irq 11
<4>hde: max request size: 128KiB
<6>hde: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
<6> hde: hde1 hde2 hde3
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>input: PS2++ Logitech Wheel Mouse on isa0060/serio1
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>input: AT Translated Set 2 keyboard on isa0060/serio0
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 2048 buckets, 16Kbytes
<6>TCP: Hash tables configured (established 16384 bind 32768)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<4>Resume Machine: resuming from /dev/hde1
<4>Resuming from device hde1
<3>Resume Machine: This is normal swap space
<7>PM: Reading pmdisk image.
<7>PM: Resume from disk failed.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<5>RAMDISK: Compressed image found at block 0
<4>VFS: Mounted root (ext2 filesystem).
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>VFS: Mounted root (ext3 filesystem) readonly.
<5>Trying to move old root to /initrd ... failed
<5>Unmounting old root
<5>Trying to free ramdisk memory ... okay
<6>Freeing unused kernel memory: 212k freed
<6>Adding 500432k swap on /dev/hde1. Priority:42 extents:1
<6>EXT3 FS on hde2, internal journal
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on hde3, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>subfs 0.9
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Wed Dec 8 00:59:05 2004

<notice>run boot scripts (setserial boot.proc)
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is (0 0)
<notice>run boot scripts (boot.shm)
Mounting shared memory FS on /dev/shmdone
<notice>exit status of (boot.shm) is (0)
<notice>run boot scripts (boot.rootfsck)
Activating swap-devices in /etc/fstab...
doneFile systems are NOT being checked.
<notice>exit status of (boot.rootfsck) is (0)
<notice>run boot scripts (boot.md boot.device-mapper)
Activating device mapper...
Creating /dev/mapper/control character device with major:10 minor:63.
done
<notice>exit status of (boot.md boot.device-mapper) is (0 0)
<notice>run boot scripts (boot.localfs)
Checking file systems...
fsck 1.34 (25-Jul-2003)
/dev/hde3: clean, 47/2056320 files, 2805129/4107222 blocks
doneSetting updone
Mounting local file systems...
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hde3 on /video type ext3 (rw)
/dev/hdg on /media/cdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
done<notice>exit status of (boot.localfs) is (0)
<notice>run boot scripts (boot.crypto)
<notice>exit status of (boot.crypto) is (0)
<notice>run boot scripts (boot.swap boot.scpm boot.restore_permissions boot.loadmodules)
Loading required kernel modules
doneRestore device permissionsdone
Activating remaining swap-devices in /etc/fstab...
done<notice>exit status of (boot.swap boot.scpm boot.restore_permissions boot.loadmodules) is (0 0 0 0)
<notice>run boot scripts (boot.idedma boot.clock)
Setting up the CMOS clockdone
<notice>exit status of (boot.idedma boot.clock) is (0 0)
<notice>run boot scripts (boot.ldconfig)
Setting up timezone datadone
<notice>exit status of (boot.ldconfig) is (0)
<notice>run boot scripts (boot.sched boot.localnet boot.isapnp)
Setting scheduling timeslices unused
Setting up hostname 'vdrPC'done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
done
<notice>exit status of (boot.sched boot.localnet boot.isapnp) is (6 0 0)
<notice>run boot scripts (boot.klog boot.ipconfig)
Enabling syn flood protectiondone
Disabling IP forwardingdone
Creating /var/log/boot.msg
done<notice>killproc: kill(254,29)
<notice>System Boot Control: The system has been set up
Skipped features: boot.sched
System Boot Control: Running /etc/init.d/boot.local
exit status of (boot.klog boot.ipconfig) is (0 0)
done<notice>killproc: kill(254,3)

INIT: Entering runlevel: 5

Boot logging started on /dev/tty1(/dev/console) at Tue Dec 7 23:59:17 2004

Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>start services (random isdn hotplug)
Hotplug is already active (disable with NOHOTPLUG=1 at the boot prompt)done
Initializing random number generatordone
<notice>exit status of (random isdn hotplug) is (0 0 0)
<notice>start services (coldplug)
coldplug scanning input: done
scanning pci: ***.**WW.*done
scanning usb: done
. . . . . . . . . . . . . . . . . . . . . . . .done
<notice>exit status of (coldplug) is (0)
<notice>start services (network)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
done eth0 device: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
eth0 configuration: eth-id-00:10:5a:f2:18:4d
eth0 IP address: 192.168.178.12/24
done dsl0
dsl0 Startmode is 'manual'
skippedSetting up service network . . . . . . . . . . . . . . . .done
<notice>exit status of (network) is (0)
<notice>start services (syslog)
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/ntp/dev/log ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -2 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=25 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>exit status of (syslog) is (0)
<notice>start services (splash_early smbfs resmgr portmap dvb)
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=26 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/sbin/portmap ]
Starting RPC portmap daemondone
Mount SMB File System unused
Starting resource managerdone
Starting DVBdone
<notice>exit status of (splash_early smbfs resmgr portmap dvb) is (0 6 0 0 0)
<notice>start services (lirc)
Starting lircd (/dev/lirc) <notice>startproc: execve (/usr/sbin/lircd) [ /usr/sbin/lircd -H default -d /dev/lirc ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=31 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/usr/sbin/lircd ]
done
<notice>exit status of (lirc) is (0)
<notice>start services (nfsboot nfs)
Starting nfsboot (sm-notify) Backgrounding to notify hosts...
done
Importing Net File System (NFS)done
<notice>exit status of (nfsboot nfs) is (0 0)
<notice>start services (vdr sshd smpppd running-kernel powersaved fbset alsasound)
<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=34 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
Starting SMPPPDdone
<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=34 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
Starting sound driverdone
Starting SSH daemondone
Starting Video Disk Recorder done
This machine supports APM <notice>checkproc: /usr/sbin/vdr 2101
Starting powersaved <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -e /etc/powersave.conf -a resmgr -v 3 ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=34 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
done
<notice>exit status of (vdr sshd smpppd running-kernel powersaved fbset alsasound) is (0 0 0 0 0 0 0)
<notice>start services (splash postfix kbd cups)
<notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=41 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
Starting cupsddone
Starting mail service (Postfix)done
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
doneLoading console font lat9w-16.psfu -m trivial (K
done<notice>exit status of (splash postfix kbd cups) is (0 0 0 0)
<notice>start services (nscd hwscan cron)
<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=45 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console TERM=linux SHELL=/bin/sh progress=45 INIT_VERSION=sysvinit-2.85 REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin vga=0x314 RUNLEVEL=5 PWD=/ PREVLEVEL=N LINES=32 SHLVL=2 sscripts=49 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
Starting hardware scan on bootStarting CRON daemondone
Starting Name Service Cache Daemondone
<notice>exit status of (nscd hwscan cron) is (0 0 0)
<notice>start services (xdm splash_late)
Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ LC_MONETARY= CONSOLE=/dev/console TERM=linux SHELL=/bin/sh LC_NUMERIC= QTDIR=/usr/lib/qt3 LC_ALL= progress=48 INIT_VERSION=sysvinit-2.85 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=92 PATH=/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin LC_MESSAGES= vga=0x314 RUNLEVEL=5 LC_COLLATE= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=32 SHLVL=2 XCURSOR_THEME=crystalwhite no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 sscripts=49 LC_TIME= _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
done
<notice>exit status of (xdm splash_late) is (0 0)
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: smbfs
<notice>killproc: kill(789,3)