hallo zusammen,
ich versuche nun folgendes system zum laufen zu bringen.
hier gibt es leider viele viele how-tos die sich leider nicht so ganz auf mein system übertragen lassen.
ich habe nur eine pvr 350 im system:
kernel 2.6.9-r1 gentoo
vdr 1.3.14
pvr350 plugin 0.3.0
analogtv plugin 0.9.36
ivtv-0.2.0rc2d
libdvb 0.5.4 ist für analogtv gepatched.
ffmpeg-0.4.9_pre1
so zu meinem problem
alles sauber ohne fehler compiled.
seit der ivtv-0.2.0 braucht man diese ja nicht mehr patchen, richtig?
laut doku sollte ein modprobe ivtv reichen.
gut, ich bekomme über das analogtv plugin nur hämmernden sound, laut, metallisch brummend. im bild wird rauschen oder der composite eingang angezeit. nach kurzer zeit ist das vorbei und ton ist weg und bild steht still.
wenn ich eine aufnahme abspiele ist der ton gut, aber die wiedergabe stoppt nach wenigen sekunden. das passiert auch wenn
laut analogplugin soll video pid 301 und audio pid 300 sein. ist auch so eingestellt.
ausgabe von lsmod
Module Size Used by
ivtv_fb 27672 0
msp3400 26296 0
saa7127 11164 0
saa7115 11416 0
tuner 18596 0
tveeprom 10932 0
ivtv 799844 2 ivtv_fb
bttv 144204 0
video_buf 16772 1 bttv
firmware_class 7680 1 bttv
i2c_algo_bit 8456 2 ivtv,bttv
v4l2_common 4992 1 bttv
btcx_risc 3848 1 bttv
videodev 7552 2 ivtv,bttv
lirc_i2c 6788 0
lirc_dev 10892 1 lirc_i2c
w83781d 32688 0
i2c_sensor 3200 1 w83781d
i2c_isa 1920 0
i2c_dev 7936 0
i2c_core 18960 12 msp3400,saa7127,saa7115,tuner,tveeprom,bttv,i2c_algo_bit,lirc_i2c,w83781d,i2c_sensor,i2c_isa,i2c_dev
Alles anzeigen
was mich stört ist dieser bttv. ich weiß nicht wo der geladen wird. vielleicht von tuner.
folgende ausgabe liefert vdr beim start:
08:21:31 analogTV version 0.9.36 starting up ...
08:21:31
08:21:31 Copyright (C) 2003 .. 2004 by Andreas Kool (akool@gmx.de)
08:21:31
08:21:31 The analogTV plugin is the work of many people;
08:21:31 for at least a partial list see CREDITS.
08:21:31
08:21:31 analogTV comes with ABSOLUTELY NO WARRANTY; for details see COPYING.
08:21:31 This is free software, and you are welcome to redistribute it
08:21:31 under certain conditions; see COPYING for details.
08:21:31
08:21:31 Detected Linux version 2.6.9-gentoo-r1
08:21:31 Detected VDR version 1.3.14
08:21:31 Detected plain-vanilla VDR (hopefully :-)
sizex 720 sizey 576 size 1658880
Size 2880 1662976
Offset 0 max 1658880 stride 1440 lines 576 x 0 y 0
08:21:31 cSchedules created
08:21:31 Detected ConfigDirectory()="/usr/local/etc/vdr/plugins"
08:21:31 CPU Intel(R) Celeron(R) CPU 2.00GHz, family 15, model 2, stepping 9
Writer started pid 6617
08:21:31 CPU measured at 1997,202MHz
08:21:31 Using SSE optimized memcpy()
08:21:31 Switching to channel 0 on device 4
08:21:31 Switching to channel 0 on device 5
08:21:31 Channel: 73, SID=12003, 610,00 MHz (???), PAL
08:21:31 Video device: /dev/video0
08:21:31 Video source: 4:
08:21:31 NEW videodev=/dev/video0
08:21:31 Detected V4L version 2
08:21:31 Detected capture device Vanilla iTVC15 card
08:21:31 Detected hardware Hauppauge PVR
08:21:31 This device have a tuner
08:21:31 This device is able for capturing
08:21:31 This device have a onboard MPEG-Encoder
08:21:31 Detected Input#0: Composite 0
08:21:31 Detected Input#1: Composite 1
08:21:31 Detected Input#2: Composite 2
08:21:31 Detected Input#3: Composite 3
08:21:31 Detected Input#4: Tuner 0
08:21:31 Detected Input#5: Composite 4
08:21:31 Detected Input#6: S-Video 0
08:21:31 Detected Input#7: S-Video 1
08:21:31 Detected Input#8: S-Video 2
08:21:31 Detected Input#9: S-Video 3
08:21:31 NEW Frequency=610000 + 0
08:21:31 NEW videonorm=PAL
08:21:31 NEW videosource=4:Tuner 0
08:21:31 NEW picture properties
08:21:31 NEW PVR MPEG-Encoder parameter(s)
08:21:31 PVR Norm=0:PAL - done.
08:21:31 PVR MPEG-TS, aspect 4:3, VBR, 3:2 pulldown
08:21:31 PVR Videobitrate= 8 Mbit/s (max=2e+01 Mbit/s)
08:21:31 PVR 12 frames/GOP, 3 B-frames, GOP closed
08:21:31 PVR DNR:spatial and temporal (type=0, spatial=0, temporal=0)
08:21:31 PVR Audiobitrate=80 kBit/s (Mask=0x59)
08:21:31 PVR MPEG-Encoder parameter(s) - done.
08:21:31 PVR Input=4:Tuner 0 - done.
08:21:32 PVR Frequency=9760 - done.
08:21:32 PVR brightness=20 (58,8%) contrast=14 (41,2%) colour=16 (47,1%) hue=15 (44,1%)
08:21:32 PVR saa7115 brightness=150 contrast=53 colour=60 hue=-15 - done.
08:21:32 PVR Volume=59636 - done.
08:21:32 Switching to channel 1 on device 5
08:21:32 NEW Audio-PID=300, Video-PID=301
08:21:32 Switching to channel 1 on device 4
size set:0:00:00.316 V:0:00:00.400 V-V:0:00:00.083 D:8,25% CPU:100,0%
08:21:40 TS: Stats video ( 301): 457 packets
08:21:40 TS: Stats audio ( 300): 48288 packets
08:21:40 TS: Stats ( 0): 85 packets
08:21:40 TS: Stats ( 60): 86 packets
08:21:40 TS: Stats ( 101): 746 packets
08:21:40 TS: Stats (8191): 6658 packets
08:21:40 TS: Stats skipped: 7575 packets
08:21:40 TS: Stats duplicates: 54 packets
08:21:40 TS: Stats got 0 TS errors, 583 TS continuity errors
08:21:40 TS: Stats 10588348 bytes total, 1424100 skipped
08:21:40 PVR Input=4:Tuner 0 - done.
STOP_DECODE -1
4: -1
Alles anzeigen
der relevante auszug aus dem syslog ist:
Oct 26 08:21:32 [kernel] saa7115: decoder disable output
Oct 26 08:21:32 [kernel] saa7115: decoder enable output
Oct 26 08:21:32 [kernel] saa7115: decoder set picture bright=150 contrast=53 saturation=60 hue=-15
- Last output repeated 3 times -
Oct 26 08:21:33 [kernel] saa7115: decoder disable output
Oct 26 08:21:33 [kernel] saa7115: decoder enable output
so, was braucht man noch für logs?
also ich bin momentan mit meinem latein am ende.