Das ist kein Hexenwerk. Du musst die Aufzeichnungen markieren, das geschieht durch eine Datei namens vt.conf. Das kannst Du z.B. mit der Anweisung vt --conf -o mp4, in der Datei sind die Parameter für die Transkodierung gespeichert, sie kann auch leer sein. Sind alle Aufzeichnungen markiert, startest Du das Ganze mit vt -as &
vdr-transcode - swiss knife for transcoding
-
-
Danke für deine schnelle Antwort,aber das ist mir alles zu hoch.
Trotzdem Danke
-
Das geht auch über die Fernbedienung, wie das eingerichtet wird, steht im 1. Beitrag.
-
steht im 1. Beitrag
Was meinst du damit
-
-
vdr-transcode - swiss knife for transcoding
Habe ich mir 1000 mal durchgelesen,sorry ich verstehe nur Bahnhof.
-
Entschuldige bitte, aber mit so pauschalen Aussagen kann ich nichts anfangen. Was konkret verstehst Du nicht?
-
Entschuldige bitte, aber mit so pauschalen Aussagen kann ich nichts anfangen. Was konkret verstehst Du nicht?
Dein Script funktioniert ja grundsätzlich.
Aber ich weiß nicht was ich tun muss um die Umwandlung über das Menü des VDR per Fernbedienung anzuschubsen
-
-
Du musst die Datei reccmds.confin der vdr-Konfiguration anpassen. Wenn sie fehlt, musst Du sie anlegen. Den Befehl vt --as & kannst Du in den Autostart packen, wie das geht, hängt von Deiner Distrobution ab.
-
Nur den Parameter -o mp4 in vt.conf im Aufnahmeverzeichnis.
-
Suchpfade werden in /etc/vdr-transcode-s.conf angelegt.
Damit ist Dein Aufnahmeverzeichnis gemeint.
-
Code
Alles anzeigen# This file is automatically generated by the vdr init-script. You can # define custom commands in /etc/vdr/command-hooks/reccmds.custom.conf # (see /usr/share/doc/vdr/README.Debian.gz). # # This is an example file for defining external commands, that will be # accessible as commands at the recordings list. # The commands will be executed under the same user id that vdr is running # with, so take care if your are running vdr as root! # # The format of a command entry is: <title> : <command> # <title> is the menu text shown on the OSD and <command> is the command to # be executed. Everything that <command> writes to stdout will be displayed # on the OSD. Also the name of the selected recording will be passed # in single quotes as the first parameter to the command, e.g.: # # Show me the recording name: echo # # If you uncomment the line above and restart vdr, you will have a new # recordings command menu entry, called "Show me the recording name", that # will simply show you the recording name :-) # # You can divide your commands into submenus, e.g.: # # main menu node { # sub menu entry 1 : do_something.sh # sub menu entry 2 : do_something_else.sh # sub menu node { # sub-sub menu entry : do_whatever_you_want.sh # } # } # # # *** ANSIBLE MANAGED FILE *** # template: /home/frank/yavdr-ansible/roles/vdr/files/reccmds.removemarks.conf.j2 # Schnittmarken entfernen : /usr/local/bin/removemarks Index Datei entfernen : /usr/local/bin/removeindex Wiedergabeposition löschen : /usr/local/bin/removeresume Werbung markieren : /usr/bin/markad -O "$1" after
Meine reccmds.conf sieht so aus,was muss ich dort einfügen?
-
Wenn Du nie was Anderes als nach mp4 konvertieren machen willst, kannst Du den Parameter -o mp4auch in /etc/vdr-transcode.confablegen, würde ich aber nicht empfehlen. Dann würde eine leere vt.confgenügen.
-
-
Suchpfade werden in /etc/vdr-transcode-s.conf angelegt.
Dort habe ich /srv/vdr/video eingetragen
-
Wenn das Dein Aufnahmeverz. ist, ist das ok.
-
Was ist das denn für eine Distro?
YaVDR-ansible
-
-
vt.conf ???
wo muss die hin?
Nur den Parameter -o mp4 in vt.conf im Aufnahmeverzeichnis.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!